When an Exit Node is used, we create a WFP rule to block all inbound and outbound traffic,
along with several rules to permit specific types of traffic. Notably, we allow all inbound and
outbound traffic to and from LocalRoutes specified in wgengine/router.Config. The list of allowed
routes always includes routes for internal interfaces, such as loopback and virtual Hyper-V/WSL2
interfaces, and may also include LAN routes if the "Allow local network access" option is enabled.
However, these permitting rules do not allow link-local multicast on the corresponding interfaces.
This results in broken mDNS/LLMNR, and potentially other similar issues, whenever an exit node is used.
In this PR, we update (*wf.Firewall).UpdatePermittedRoutes() to create rules allowing outbound and
inbound link-local multicast traffic to and from the permitted IP ranges, partially resolving the mDNS/LLMNR
and *.local name resolution issue.
Since Windows does not attempt to send mDNS/LLMNR queries if a catch-all NRPT rule is present,
it is still necessary to disable the creation of that rule using the disable-local-dns-override-via-nrpt nodeAttr.
Updates #13571
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Of tests we wish we could easily add. One day.
Updates #13038
Change-Id: If44646f8d477674bbf2c9a6e58c3cd8f94a4e8df
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
1eaad7d3de regressed some tests in another repo that were starting up
a control server on `http://127.0.0.1:nnn`. Because there was no https
running, and because of a bug in 1eaad7d3de (which ended up checking
the recently-dialed-control check twice in a single dial call), we
ended up forcing only the use of TLS dials in a test that only had
plaintext HTTP running.
Instead, plumb down support for explicitly disabling TLS fallbacks and
use it only when running in a test and using `http` scheme control
plane URLs to 127.0.0.1 or localhost.
This fixes the tests elsewhere.
Updates #13597
Change-Id: I97212ded21daf0bd510891a278078daec3eebaa6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Discovered this while investigating the following issue; I think it's
unrelated, but might as well fix it. Also, add a test helper for
checking things that have an IsZero method using the reflect package.
Updates tailscale/support-escalations#55
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I57b7adde43bcef9483763b561da173b4c35f49e2
This reproduces the bug report from
https://github.com/tailscale/tailscale/issues/13346
It does not yet fix it.
Updates #13346
Change-Id: Ia5af7b0481a64a37efe259c798facdda6d9da618
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No need to make callers specify the redundant IP version or
TTL/HopLimit or EthernetType in the common case. The mkPacket helper
can set those when unset.
And use the mkIPLayer in another place, simplifying some code.
And rename mkPacketErr to just mkPacket, then move mkPacket to
test-only code, as mustPacket.
Updates #13038
Change-Id: Ic216e44dda760c69ab9bfc509370040874a47d30
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And clean up some of the test helpers in the process.
Updates #13038
Change-Id: I3e2b5f7028a32d97af7f91941e59399a8e222b25
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'd added this helper for tests, but then moved it to non-test code
and forgot some places to use it. This uses it in more places to
remove some boilerplate.
Updates #13038
Change-Id: Ic4dc339be1c47a55b71d806bab421097ee3d75ed
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds tests for DNS requests, and ignoring IPv6 packets on v4-only
networks.
No behavior changes. But some things are pulled out into functions.
And the mkPacket helpers previously just for tests are moved into
non-test code to be used elsewhere to reduce duplication, doing the
checksum stuff automatically.
Updates #13038
Change-Id: I4dd0b73c75b2b9567b4be3f05a2792999d83f6a3
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When the TS_DEBUG_NETSTACK_LOOPBACK_PORT environment variable is set,
netstack will loop back (dnat to addressFamilyLoopback:loopbackPort)
TCP & UDP flows originally destined to localServicesIP:loopbackPort.
localServicesIP is quad-100 or the IPv6 equivalent.
Updates tailscale/corp#22713
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This adds support for sending packets to 33:33:00:00:01 at IPv6
multicast address ff02::1 to send to all nodes.
Nothing in Tailscale depends on this (yet?), but it makes debugging in
VMs behind natlab easier (e.g. you can ping all nodes), and other
things might depend on this in the future.
Mostly I'm trying to flesh out the IPv6 support in natlab now that we
can write vnet tests.
Updates #13038
Change-Id: If590031fcf075690ca35c7b230a38c3e72e621eb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To test how virtual machines connect to the natlab vnet code.
Updates #13038
Change-Id: Ia4fd4b0c1803580ee7d94cc9878d777ad4f24f82
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And refactor some of vnet.go for testability.
The only behavioral change (with a new test) is that ethernet
broadcasts no longer get sent back to the sender.
Updates #13038
Change-Id: Ic2e7e7d6d8805b7b7f2b5c52c2c5ba97101cef14
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The bad naming (which had only been half updated with the IPv6
changes) tripped me up in the earlier change.
Updates #13038
Change-Id: I65ce07c167e8219d35b87e1f4bf61aab4cac31ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The reason they weren't working was because the cmd/tta agent in the
guest was dialing out to the test and the vnet couldn't map its global
unicast IPv6 address to a node as it was just using a
map[netip.Addr]*node and blindly trusting the *node was
populated. Instead, it was nil, so the agent connection fetching
didn't work for its RoundTripper and the test could never drive the
node. That map worked for IPv4 but for IPv6 we need to use the method
that takes into account the node's IPv6 SLAAC address. Most call sites
had been converted but I'd missed that one.
Also clean up some debug, and prohibit nodes' link-local unicast
addresses from dialing 2000::/3 directly for now. We can allow that to
be configured opt-in later (some sort of IPv6 NAT mode. Whatever it's
called.) That mode was working on accident, but was confusing: Linux
would do source address selection from link local for the first few
seconds and then after SLAAC and DAD, switch to using the global
unicast source address. Be consistent for now and force it to use the
global unicast.
Updates #13038
Change-Id: I85e973aaa38b43c14611943ff45c7c825ee9200a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Move all the UDP handling to its own func to remove a bunch of "if
isUDP" checks in a bunch of blocks.
Updates #13038
Change-Id: If71d71b49e57651d15bd307a2233c43751cc8639
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I didn't actually see this, but added this while debugging something
and figured it'd be good to keep.
Updates #13038
Change-Id: I67934c8a329e0233f79c3b08516fd6bad6bfe22a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And sprinkle some more docs around.
Updates #13038
Change-Id: Ia2dcf567b68170481cc2094d64b085c6b94a778a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
All the magic service names with virtual IPs will need IPv6 variants.
Pull this out in prep.
Updates #13038
Change-Id: I53b5eebd0679f9fa43dc0674805049258c83a0de
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So we don't log about them when verbose logging is enabled.
Updates #13038
Change-Id: I925bc3a23e6c93d60dd4fb4bf6a4fdc5a326de95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The natlab Test Agent (tta) still had its old log streaming hack in
place where it dialed out to anything on TCP port 124 and those logs
were streamed to the host running the tests. But we'd since added gokrazy
syslog streaming support, which made that redundant.
So remove all the port 124 stuff. And then make sure we log to stderr
so gokrazy logs it to syslog.
Also, keep the first 1MB of logs in memory in tta too, exported via
localhost:8034/logs for interactive debugging. That was very useful
during debugging when I added IPv6 support. (which is coming in future
PRs)
Updates #13038
Change-Id: Ieed904a704410b9031d5fd5f014a73412348fa7f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailcale/corp#22371
For dgram mode, we need to store the write addresses of
the client socket(s) alongside the writer functions and
the write operation needs to use WriteToUnix.
Unix also has multiple clients writing to the same socket,
so the serve method is modified to handle packets from
multiple mac addresses.
Cleans up a bit of cruft from the initial tailmac tooling
commit.
Now all the macOS packets are belong to us.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
In prep for updating to new staticcheck required for Go 1.23.
Updates #12912
Change-Id: If77892a023b79c6fa798f936fc80428fd4ce0673
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
updates tailcale/corp#22371
Adds custom macOS vm tooling. See the README for
the general gist, but this will spin up VMs with unixgram
capable network interfaces listening to a named socket,
and with a virtio socket device for host-guest communication.
We can add other devices like consoles, serial, etc as needed.
The whole things is buildable with a single make command, and
everything is controllable via the command line using the TailMac
utility.
This should all be generally functional but takes a few shortcuts
with error handling and the like. The virtio socket device support
has not been tested and may require some refinement.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
... rather than abusing the generic tsapp.
Per discussion in https://github.com/gokrazy/gokrazy/pull/275
It also means we can remove stuff we don't need, like ntp or randomd.
Updates #13038
Change-Id: Iccf579c354bd3b5025d05fa1128e32f1d5bde4e4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It's too new to be supported in Debian bookworm so just remove it.
It doesn't seem to matter or help speed anything up.
Updates #13038
Change-Id: I39077ba8032bebecd75209552b88f1842c843c33
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
84adfa1ba3 made MAC addresses 1-based too, but didn't adjust this IP address
calculation which was based on the MAC address
Updates #13038
Change-Id: Idc112b303b0b85f41fe51fd61ce1c0d8a3f0f57e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We had a mix of 0-based and 1-based nodes and MACs in logs.
Updates #13038
Change-Id: I36d1b00f7f94b37b4ae2cd439bcdc5dbee6eda4d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Using https://github.com/gokrazy/gokrazy/pull/275
This is much lower latency than logcatcher, which is higher latency
and chunkier. And this is better than getting it via 'tailscale debug
daemon-logs', which misses early interesting logs.
Updates #13038
Change-Id: I499ec254c003a9494c0e9910f9c650c8ac44ef33
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In particular, tests showing that #3824 works. But that test doesn't
actually work yet; it only gets a DERP connection. (why?)
Updates #13038
Change-Id: Ie1fd1b6a38d4e90fae7e72a0b9a142a95f0b2e8f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To test local connections.
Updates #13038
Change-Id: I575dcab31ca812edf7d04fa126772611cf89b9a7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>