A non-signing node can be allowed to re-sign its new node keys following
key renewal/rotation (e.g. via `tailscale up --force-reauth`). To be
able to do this, node's TLK is written into WrappingPubkey field of the
initial SigDirect signature, signed by a signing node.
The intended use of this field implies that, for each WrappingPubkey, we
typically expect to have at most one active node with a signature
tracing back to that key. Multiple valid signatures referring to the
same WrappingPubkey can occur if a client's state has been cloned, but
it's something we explicitly discourage and don't support:
https://tailscale.com/s/clone
This change propagates rotation details (wrapping public key, a list
of previous node keys that have been rotated out) to netmap processing,
and adds tracking of obsolete node keys that, when found, will get
filtered out.
Updates tailscale/corp#19764
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
Updates #12172 (then need to update other repos)
Change-Id: I439f65e0119b09e00da2ef5c7a4f002f93558578
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The CLI's "up" is kinda chaotic and LocalBackend.Start is kinda
chaotic and they both need to be redone/deleted (respectively), but
this fixes some buggy behavior meanwhile. We were previously calling
StartLoginInteractive (to start the controlclient's RegisterRequest)
redundantly in some cases, causing test flakes depending on timing and
up's weird state machine.
We only need to call StartLoginInteractive in the client if Start itself
doesn't. But Start doesn't tell us that. So cheat a bit and a put the
information about whether there's a current NodeKey in the ipn.Status.
It used to be accessible over LocalAPI via GetPrefs as a private key but
we removed that for security. But a bool is fine.
So then only call StartLoginInteractive if that bool is false and don't
do it in the WatchIPNBus loop.
Fixes#12028
Updates #12042
Change-Id: I0923c3f704a9d6afd825a858eb9a63ca7c1df294
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We used to Lock, Unlock, Lock, Unlock quite a few
times in Start resulting in all sorts of weird race
conditions. Simplify it all and only Lock/Unlock once.
Updates #11649
Signed-off-by: Maisem Ali <maisem@tailscale.com>
I found this too hard to read before.
This is pulled out of #12033 as it's unrelated cleanup in retrospect.
Updates #12028
Change-Id: I727c47e573217e3d1973c5b66a76748139cf79ee
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a new bool that can be sent down from control
to do jailing on the client side. Previously this would
only be done from control by modifying the packet filter
we sent down to clients. This would result in a lot of
additional work/CPU on control, we could instead just
do this on the client. This has always been a TODO which
we keep putting off, might as well do it now.
Updates tailscale/corp#19623
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Now that tsdial.Dialer.UserDial has been updated to honor the configured routes
and dial external network addresses without going through Tailscale, while also being
able to dial a node/subnet router on the tailnet, we can start using UserDial to forward
DNS requests. This is primarily needed for DNS over TCP when forwarding requests
to internal DNS servers, but we also update getKnownDoHClientForProvider to use it.
Updates tailscale/corp#18725
Signed-off-by: Nick Khyl <nickk@tailscale.com>
When an app connector is reconfigured and domains to route are removed,
we would like to no longer advertise routes that were discovered for
those domains. In order to do this we plan to store which routes were
discovered for which domains.
Add a controlknob so that we can enable/disable the new behavior.
Updates #11008
Signed-off-by: Fran Bull <fran@tailscale.com>
... in prep for merging the net/interfaces package into net/netmon.
This is a no-op change that updates a bunch of the API signatures ahead of
a future change to actually move things (and remove the type alias)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I477613388f09389214db0d77ccf24a65bff2199c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves most of the health package global variables to a new
`health.Tracker` type.
But then rather than plumbing the Tracker in tsd.System everywhere,
this only goes halfway and makes one new global Tracker
(`health.Global`) that all the existing callers now use.
A future change will eliminate that global.
Updates #11874
Updates #4136
Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was only obviously unused after the previous change, c39cde79d.
Updates #19334
Change-Id: I9896d5fa692cb4346c070b4a339d0d12340c18f7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We were storing server-side lots of:
"Auth":{"Provider":"","LoginName":"","Oauth2Token":null,"AuthKey":""},
That was about 7% of our total storage of pending RegisterRequest
bodies.
Updates tailscale/corp#19327
Change-Id: Ib73842759a2b303ff5fe4c052a76baea0d68ae7d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The initial control client request can get stuck in the event that a
connection is established but then lost part way through, without any
ICMP or RST. Ensure that the control client will be restarted by timing
out that initial request as well.
Fixes#11542
Signed-off-by: James Tucker <james@tailscale.com>
First we had Capabilities []string. Then
https://tailscale.com/blog/acl-grants (#4217) brought CapMap, a
superset of Capabilities. Except we never really finished the
transition inside the codebase to go all-in on CapMap. This does so.
Notably, this coverts Capabilities on the wire early to CapMap
internally so the code can only deal in CapMap, even against an old
control server.
In the process, this removes PeerChange.Capabilities support, which no
known control plane sent anyway. They can and should use
PeerChange.CapMap instead.
Updates #11508
Updates #4217
Change-Id: I872074e226b873f9a578d9603897b831d50b25d9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When node attributes were super rare, the O(n) slice scans looking for
node attributes was more acceptable. But now more code and more users
are using increasingly more node attributes. Time to make it a map.
Noticed while working on tailscale/corp#17879
Updates #cleanup
Change-Id: Ic17c80341f418421002fbceb47490729048756d2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In the recent 20e9f3369 we made HealthChangeRequest machine requests
include a NodeKey, as it was the oddball machine request that didn't
include one. Unfortunately, that code was sometimes being called (at
least in some of our integration tests) without a node key due to its
registration with health.RegisterWatcher(direct.ReportHealthChange).
Fortunately tests in corp caught this before we cut a release. It's
possible this only affects this particular integration test's
environment, but still worth fixing.
Updates tailscale/corp#1297
Change-Id: I84046779955105763dc1be5121c69fec3c138672
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Use the zstdframe package where sensible instead of plumbing
around our own zstd.Encoder just for stateless operations.
This causes logtail to have a dependency on zstd,
but that's arguably okay since zstd support is implicit
to the protocol between a client and the logging service.
Also, virtually every caller to logger.NewLogger was
manually setting up a zstd.Encoder anyways,
meaning that zstd was functionally always a dependency.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Instead of just checking if a peer capmap is nil, compare the previous
state peer capmap with the new peer capmap.
Updates tailscale/corp#17516
Signed-off-by: Claire Wang <claire@tailscale.com>
This commit implements probing of UDP path lifetime on the tail end of
an active direct connection. Probing configuration has two parts -
Cliffs, which are various timeout cliffs of interest, and
CycleCanStartEvery, which limits how often a probing cycle can start,
per-endpoint. Initially a statically defined default configuration will
be used. The default configuration has cliffs of 10s, 30s, and 60s,
with a CycleCanStartEvery of 24h. Probing results are communicated via
clientmetric counters. Probing is off by default, and can be enabled
via control knob. Probing is purely informational and does not yet
drive any magicsock behaviors.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This is a useful primitive for asynchronous execution of ordered work I
want to use in another change.
Updates tailscale/corp#16833
Signed-off-by: James Tucker <james@tailscale.com>
When auto-update setting in local Prefs is unset, apply the tailnet
default value from control. This only happens once, when we apply the
default (or when the user manually overrides it), tailnet default no
longer affects the node.
Updates #16244
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change exposes SilentDisco as a control knob, and plumbs it down to
magicsock.endpoint. No changes are being made to magicsock.endpoint
disco behavior, yet.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for making mapSession's lifetime not be 1:1 with a single HTTP
response's lifetime, this moves the inactivity timer watchdog out of
mapSession and into the caller that owns the streaming HTTP response.
(This is admittedly closer to how it was prior to the mapSession type
existing, but that was before we connected some dots which were
impossible to even see before the mapSession type broke the code up.)
Updates #7175
Change-Id: Ia108dac84a4953db41cbd30e73b1de4a2a676c11
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It was a really a mutable field owned by mapSession that we didn't move
in earlier commits.
Once moved, it's then possible to de-func-ify the code and turn it into
a regular method rather than an installed optional hook.
Noticed while working to move map session lifetimes out of
Direct.sendMapRequest's single-HTTP-connection scope.
Updates #7175
Updates #cleanup
Change-Id: I6446b15793953d88d1cabf94b5943bb3ccac3ad9
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We no longer build Windows releases with cgo enabled, which
automatically turned off certstore support. Rather than re-enabling cgo,
we updated our fork of the certstore package to no longer require cgo.
This updates the package, cleans up how the feature is configured, and
removes the cgo build tag requirement.
Fixestailscale/corp#14797Fixestailscale/coral#118
Change-Id: Iaea34340761c0431d759370532c16a48c0913374
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
Thanks to @qur and @eric for debugging!
Fixes#6973
Change-Id: Ib2cf8f030cf595cc73dd061c72e78ac19f5fae5d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Anton Tolchanov
Brad Fitzpatrick
Maisem Ali
Nick Khyl
Fran Bull
James Tucker
Joe Tsai
Adrian Dewhurst
Claire Wang
Jordan Whited
James 'zofrex' Sanderson
Andrew Lytvynov
Naman Sood
Matt Layher
Brad Fitzpatrick