Looking at profiles, we spend a lot of time in winipcfg.LUID.DeleteRoute
looking up the routing table entry for the provided RouteData.
But we already have the row! We previously obtained that data via the full
table dump we did in getInterfaceRoutes. We can make this a lot faster by
hanging onto a reference to the wipipcfg.MibIPforwardRow2 and executing
the delete operation directly on that.
Fixes#11123
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
FileSystemForLocal was listening on the node's Tailscale address,
which potentially exposes the user's view of TailFS shares to other
Tailnet users. Remote nodes should connect to exported shares via
the peerapi.
This removes that code so that FileSystemForLocal is only avaialable
on 100.100.100.100:8080.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Adds support for node attribute tailfs:access. If this attribute is
not present, Tailscale will not accept connections to the local TailFS
server at 100.100.100.100:8080.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Add a WebDAV-based folder sharing mechanism that is exposed to local clients at
100.100.100.100:8080 and to remote peers via a new peerapi endpoint at
/v0/tailfs.
Add the ability to manage folder sharing via the new 'share' CLI sub-command.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This commit implements probing of UDP path lifetime on the tail end of
an active direct connection. Probing configuration has two parts -
Cliffs, which are various timeout cliffs of interest, and
CycleCanStartEvery, which limits how often a probing cycle can start,
per-endpoint. Initially a statically defined default configuration will
be used. The default configuration has cliffs of 10s, 30s, and 60s,
with a CycleCanStartEvery of 24h. Probing results are communicated via
clientmetric counters. Probing is off by default, and can be enabled
via control knob. Probing is purely informational and does not yet
drive any magicsock behaviors.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
When tailscaled is run with "-debug 127.0.0.1:12345", these metrics are
available at:
http://localhost:12345/debug/metrics
Updates #8210
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I19db6c445ac1f8344df2bc1066a3d9c9030606f8
This is in response to logs from a customer that show that we're unable
to run netsh due to the following error:
router: firewall: adding Tailscale-Process rule to allow UDP for "C:\\Program Files\\Tailscale\\tailscaled.exe" ...
router: firewall: error adding Tailscale-Process rule: exec: "netsh": cannot run executable found relative to current directory:
There's approximately no reason to ever dynamically look up the path of
a system utility like netsh.exe, so instead let's first look for it
in the System32 directory and only if that fails fall back to the
previous behaviour.
Updates #10804
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I68cfeb4cab091c79ccff3187d35f50359a690573
Run `staticcheck` with `U1000` to find unused code. This cleans up about
a half of it. I'll do the other half separately to keep PRs manageable.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The switch in Conn.runDerpReader() on the derp.ReceivedMessage type
contained cases other than derp.ReceivedPacket that fell through to
writing to c.derpRecvCh, which should only be reached for
derp.ReceivedPacket. This can result in the last/previous
derp.ReceivedPacket to be re-handled, effectively creating a duplicate
packet. If the last derp.ReceivedPacket happens to be a
disco.CallMeMaybe it may result in a disco ping scan towards the
originating peer on the endpoints contained.
The change in this commit moves the channel write on c.derpRecvCh and
subsequent select awaiting the result into the derp.ReceivedMessage
case, preventing it from being reached from any other case. Explicit
continue statements are also added to non-derp.ReceivedPacket cases
where they were missing, in order to signal intent to the reader.
Fixes#10586
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This uses the fact that we've received a frame from a given DERP region
within a certain time as a signal that the region is stil present (and
thus can still be a node's PreferredDERP / home region) even if we don't
get a STUN response from that region during a netcheck.
This should help avoid DERP flaps that occur due to losing STUN probes
while still having a valid and active TCP connection to the DERP server.
RELNOTE=Reduce home DERP flapping when there's still an active connection
Updates #8603
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: If7da6312581e1d434d5c0811697319c621e187a0
* util/linuxfw, wgengine: allow ingress to magicsock UDP port on Linux
Updates #9084.
Currently, we have to tell users to manually open UDP ports on Linux when
certain firewalls (like ufw) are enabled. This change automates the process of
adding and updating those firewall rules as magicsock changes what port it
listens on.
Signed-off-by: Naman Sood <mail@nsood.in>
This will enable the runner to be replaced as a configuration side
effect in a later change.
Updates tailscale/corp#14029
Signed-off-by: James Tucker <james@tailscale.com>
For use in ACL tests, we need a way to check whether a packet is allowed
not just with TCP, but any protocol.
Updates #3561
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
In DERP homeless mode, a DERP home connection is not sought or
maintained and the local node is not reachable.
Updates #3363
Updates tailscale/corp#396
Change-Id: Ibc30488ac2e3cfe4810733b96c2c9f10a51b8331
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is gated behind the silent disco control knob, which is still in
its infancy. Prior to this change disco pong reception was the only
event that could move trustBestAddrUntil forward, so even though we
weren't heartbeating, we would kick off discovery pings every
trustUDPAddrDuration and mirror to DERP.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This change exposes SilentDisco as a control knob, and plumbs it down to
magicsock.endpoint. No changes are being made to magicsock.endpoint
disco behavior, yet.
Updates #540
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Co-authored-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change updates log messaging when cleaning up wireguard only peers.
This change also stops us unnecessarily attempting to clean up disco
pings for wireguard only endpoints.
Updates #7826
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
TestNewConn now passes as root on Linux. It wasn't closing the BPF
listeners and their goroutines.
The code is still a mess of two Close overlapping code paths, but that
can be refactored later. For now, make the two close paths more similar.
Updates #9945
Change-Id: I8a3cf5fb04d22ba29094243b8e645de293d9ed85
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Prior to an earlier netstack bump this code used a string conversion
path to cover multiple cases of behavior seemingly checking for
unspecified addresses, adding unspecified addresses to v6. The behavior
is now crashy in netstack, as it is enforcing address length in various
areas of the API, one in particular being address removal.
As netstack is now protocol specific, we must not create invalid
protocol addresses - an address is v4 or v6, and the address value
contained inside must match. If a control path attempts to do something
otherwise it is now logged and skipped rather than incorrect addressing
being added.
Fixestailscale/corp#15377
Signed-off-by: James Tucker <james@tailscale.com>
Don't assume Linux lacks UDP_GRO support if it lacks UDP_SEGMENT
support. This mirrors a similar change in wireguard/wireguard-go@177caa7
for consistency sake. We haven't found any issues here, just being
overly paranoid.
Updates #cleanup
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Regression from c15997511d. The callback could be run multiple times
from different endpoints.
Fixes#9801
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This migrates containerboot to reuse the NetfilterRunner used
by tailscaled instead of manipulating iptables rule itself.
This has the added advantage of now working with nftables and
we can potentially drop the `iptables` command from the container
image in the future.
Updates #9310
Co-authored-by: Irbe Krumina <irbe@tailscale.com>
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Just a refactor to consolidate the firewall detection logic in a single
package so that it can be reused in a later commit by containerboot.
Updates #9310
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Record the number of MTU probes sent, the total bytes sent, the number of times
we got a successful return from an MTU probe of a particular size, and the max
MTU recorded.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Automatically probe the path MTU to a peer when peer MTU is enabled, but do not
use the MTU information for anything yet.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
When sending a CLI ping with a specific size, continue to probe all possible UDP
paths to the peer until we find one with a large enough MTU to accommodate the
ping. Record any peer path MTU information we discover (but don't use it for
anything other than CLI pings).
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Add a field to record the wire MTU of the path to this address to the
addrLatency struct and rename it addrQuality.
Updates #311
Signed-off-by: Val <valerie@tailscale.com>
Jason Barnett
Aaron Klotz
Percy Wegmann
Joe Tsai
Jordan Whited
James Tucker
Claire Wang
Andrew Dunham
Andrew Lytvynov
Naman Sood
Brad Fitzpatrick
Charlotte Brandhorst-Satzkorn
Maisem Ali
Val