In prep for upcoming flow tracking & mutex contention optimization
changes, this change refactors (subjectively simplifying) how the DERP
Server accounts for which peers have written to which other peers, to
be able to send PeerGoneReasonDisconnected messages to writes to
uncache their DRPO (DERP Return Path Optimization) routes.
Notably, this removes the Server.sentTo field which was guarded by
Server.mu and checked on all packet sends. Instead, the accounting is
moved to each sclient's sendLoop goroutine and now only needs to
acquire Server.mu for newly seen senders, the first time a peer sends
a packet to that sclient.
This change reduces the number of reasons to acquire Server.mu
per-packet from two to one. Removing the last one is the subject of an
upcoming change.
Updates #3560
Updates #150
Change-Id: Id226216d6629d61254b6bfd532887534ac38586c
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This un-breaks vim-go (which doesn't understand "go 1.23") and allows
the natlab tests to work in a Nix shell (by adding the "qemu-img" and
"mkfs.ext4" binaries to the shell). These binaries are available even on
macOS, as I'm testing on my M1 Max.
Updates #13038
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I99f8521b5de93ea47dc33b099d5b243ffc1303da
Now that we have our API docs hosted at https://tailscale.com/api we can
remove the previous (and now outdated) markdown based docs. The top
level api.md has been left with the only content being the redirect to
the new docs.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
netcheck.Client.GetReport() applies its own deadlines. This 2s deadline
was causing GetReport() to never fall back to HTTPS/ICMP measurements
as it was shorter than netcheck.stunProbeTimeout, leaving no time
for fallbacks.
Updates #13394
Updates #6187
Signed-off-by: Jordan Whited <jordan@tailscale.com>
And update a few callers as examples of motivation. (there are a
couple others, but these are the ones where it's prettier)
Updates #cleanup
Change-Id: Ic8c5cb7af0a59c6e790a599136b591ebe16d38eb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
73280595a8 for #2751 added a "clientSet" interface to
distinguish the two cases of a client being singly connected (the
common case) vs tolerating multiple connections from the client at
once. At the time (three years ago) it was kinda an experiment
and we didn't know whether it'd stop the reconnect floods we saw
from certain clients. It did.
So this promotes it to a be first-class thing a bit, removing the
interface. The old tests from 73280595a were invaluable in ensuring
correctness while writing this change (they failed a bunch).
But the real motivation for this change is that it'll permit a future
optimization to add flow tracking for stats & performance where we
don't contend on Server.mu for each packet sent via DERP. Instead,
each client can track its active flows and hold on to a *clientSet and
ask the clientSet per packet what the active client is via one atomic
load rather than a mutex. And if the atomic load returns nil, we'll
know we need to ask the server to see if they died and reconnected and
got a new clientSet. But that's all coming later.
Updates #3560
Change-Id: I9ccda3e5381226563b5ec171ceeacf5c210e1faf
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
When the desired netfilter mode was unset, we would always try
to use the `iptables` binary. In such cases if iptables was not found,
tailscaled would just crash as seen in #13440. To work around this, in those
cases check if the `iptables` binary even exists and if it doesn't fall back
to the nftables implementation.
Verified that it works on stock Ubuntu 24.04.
Updates #5621
Updates #8555
Updates #8762Fixes#13440
Signed-off-by: Maisem Ali <maisem@tailscale.com>
cmd/k8s-operator,k8s-operator,kube: Add TSRecorder CRD + controller
Deploys tsrecorder images to the operator's cluster. S3 storage is
configured via environment variables from a k8s Secret. Currently
only supports a single tsrecorder replica, but I've tried to take early
steps towards supporting multiple replicas by e.g. having a separate
secret for auth and state storage.
Example CR:
```yaml
apiVersion: tailscale.com/v1alpha1
kind: Recorder
metadata:
name: rec
spec:
enableUI: true
```
Updates #13298
Signed-off-by: Tom Proctor <tomhjp@users.noreply.github.com>
This mimics having Tailscale in the 'Stopped' state by programming an
empty DNS configuration when the current node key is expired.
Updates tailscale/support-escalations#55
Change-Id: I68ff4665761fb621ed57ebf879263c2f4b911610
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
It was scaring people. It's been pretty stable for quite some time now
and we're unlikely to change the API and break people at this point.
We might, but have been trying not to.
Fixestailscale/corp#22933
Change-Id: I0c3c79b57ccac979693c62ba320643a940ac947e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Rename kube/{types,client,api} -> kube/{kubetypes,kubeclient,kubeapi}
so that we don't need to rename the package on each import to
convey that it's kubernetes specific.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Further split kube package into kube/{client,api,types}. This is so that
consumers who only need constants/static types don't have to import
the client and api bits.
Updates#cleanup
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
We already disable dynamic updates by setting DisableDynamicUpdate to 1 for the Tailscale interface.
However, this does not prevent non-dynamic DNS registration from happening when `ipconfig /registerdns`
runs and in similar scenarios. Notably, dns/windowsManager.SetDNS runs `ipconfig /registerdns`,
triggering DNS registration for all interfaces that do not explicitly disable it.
In this PR, we update dns/windowsManager.disableDynamicUpdates to also set RegistrationEnabled to 0.
Fixes#13411
Signed-off-by: Nick Khyl <nickk@tailscale.com>
We no longer need this on Windows, and it was never required on other platforms.
It just results in more short-lived connections unless we use HTTP/2.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
When tailscaled restarts and our watch connection goes down, we get
stuck in an infinite loop printing `ipnbus error: EOF` (which ended up
consuming all the disk space on my laptop via the log file). Instead,
handle errors in `watchIPNBus` and reconnect after a short delay.
Updates #1708
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Disable TCP & UDP GRO if the probe fails.
torvalds/linux@e269d79c7d broke virtio_net
TCP & UDP GRO causing GRO writes to return EINVAL. The bug was then
resolved later in
torvalds/linux@89add40066. The offending
commit was pulled into various LTS releases.
Updates #13041
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Discovered this while investigating the following issue; I think it's
unrelated, but might as well fix it. Also, add a test helper for
checking things that have an IsZero method using the reflect package.
Updates tailscale/support-escalations#55
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I57b7adde43bcef9483763b561da173b4c35f49e2
When a rotation signature chain reaches a certain size, remove the
oldest rotation signature from the chain before wrapping it in a new
rotation signature.
Since all previous rotation signatures are signed by the same wrapping
pubkey (node's own tailnet lock key), the node can re-construct the
chain, re-signing previous rotation signatures. This will satisfy the
existing certificate validation logic.
Updates #13185
Signed-off-by: Anton Tolchanov <anton@tailscale.com>
With the upcoming syspolicy changes, it's imperative that all syspolicy keys are defined in the syspolicy package
for proper registration. Otherwise, the corresponding policy settings will not be read.
This updates a couple of places where we still use string literals rather than syspolicy consts.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Updates tailscale/tailscale#13326
This PR begins implementing a `tailscale dns` command group in the Tailscale CLI. It provides an initial implementation of `tailscale dns status` which dumps the state of the internal DNS forwarder.
Two new endpoints were added in LocalAPI to support the CLI functionality:
- `/netmap`: dumps a copy of the last received network map (because the CLI shouldn't have to listen to the ipn bus for a copy)
- `/dns-osconfig`: dumps the OS DNS configuration (this will be very handy for the UI clients as well, as they currently do not display this information)
My plan is to implement other subcommands mentioned in tailscale/tailscale#13326, such as `query`, in later PRs.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
This PR changes how LocalBackend handles interactive (initiated via StartLoginInteractive) and non-interactive (e.g., due to key expiration) logins,
and when it sends the authURL to the connected clients.
Specifically,
- When a user initiates an interactive login by clicking Log In in the GUI, the LocalAPI calls StartLoginInteractive.
If an authURL is available and hasn't expired, we immediately send it to all connected clients, suggesting them to open that URL in a browser.
Otherwise, we send a login request to the control plane and set a flag indicating that an interactive login is in progress.
- When LocalBackend receives an authURL from the control plane, we check if it differs from the previous one and whether an interactive login
is in progress. If either condition is true, we notify all connected clients with the new authURL and reset the interactive login flag.
We reset the auth URL and flags upon a successful authentication, when a different user logs in and when switching Tailscale login profiles.
Finally, we remove the redundant dedup logic added to WatchNotifications in #12096 and revert the tests to their original state to ensure that
calling StartLoginInteractive always produces BrowseToURL notifications, either immediately or when the authURL is received from the control plane.
Fixes#13296
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Updates tailscale/tailscale#177
It appears that the OSS distribution of `tailscaled` is currently unable to get the current system base DNS configuration, as GetBaseConfig() in manager_darwin.go is unimplemented. This PR adds a basic implementation that reads the current values in `/etc/resolv.conf`, to at least unblock DNS resolution via Quad100 if `--accept-dns` is enabled.
Signed-off-by: Andrea Gottardo <andrea@gottardo.me>
We've added more probe targets recently which has resulted in more
timeouts behind restrictive NATs in localized testing that don't
like how many flows we are creating at once. Not so much an issue
for datacenter or cloud-hosted deployments.
Updates tailscale/corp#22114
Signed-off-by: Jordan Whited <jordan@tailscale.com>
This reproduces the bug report from
https://github.com/tailscale/tailscale/issues/13346
It does not yet fix it.
Updates #13346
Change-Id: Ia5af7b0481a64a37efe259c798facdda6d9da618
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We add package defining interfaces for policy stores, enabling creation of policy sources
and reading settings from them. It includes a Windows-specific PlatformPolicyStore for GP and MDM
policies stored in the Registry, and an in-memory TestStore for testing purposes.
We also include an internal package that tracks and reports policy usage metrics when a policy setting
is read from a store. Initially, it will be used only on Windows and Android, as macOS, iOS, and tvOS
report their own metrics. However, we plan to use it across all platforms eventually.
Updates #12687
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Fran Bull
Jordan Whited
Brad Fitzpatrick
License Updater
Andrew Dunham
Mario Minardi
kari-ts
Maisem Ali
Tom Proctor
dependabot[bot]
Irbe Krumina
Nick Khyl
Patrick O'Doherty
Andrew Lytvynov
Flakes Updater
Anton Tolchanov
Andrea Gottardo