Add a new TS_EXPERIMENTAL_ENABLE_FORWARDING_OPTIMIZATIONS env var
that can be set for tailscale/tailscale container running as
a subnet router or exit node to enable UDP GRO forwarding
for improved performance.
See https://tailscale.com/kb/1320/performance-best-practices#linux-optimizations-for-subnet-routers-and-exit-nodes
This is currently considered an experimental approach;
the configuration support is partially to allow further experimentation
with containerized environments to evaluate the performance
improvements.
Updates tailscale/tailscale#12295
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
This adds a new ListenPacket function on tsnet.Server
which acts mostly like `net.ListenPacket`.
Unlike `Server.Listen`, this requires listening on a
specific IP and does not automatically listen on both
V4 and V6 addresses of the Server when the IP is unspecified.
To test this, it also adds UDP support to tsdial.Dialer.UserDial
and plumbs it through the localapi. Then an associated test
to make sure the UDP functionality works from both sides.
Updates #12182
Signed-off-by: Maisem Ali <maisem@tailscale.com>
This is primarily for GUIs, so they don't need to remember the most
recently used exit node themselves.
This adds some CLI commands, but they're disabled and behind the WIP
envknob, as we need to consider naming (on/off is ambiguous with
running an exit node, etc) as well as automatic exit node selection in
the future. For now the CLI commands are effectively developer debug
things to test the LocalAPI.
Updates tailscale/corp#18724
Change-Id: I9a32b00e3ffbf5b29bfdcad996a4296b5e37be7e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This change switches the api to /drive, rather than the previous /tailfs
as well as updates the log lines to reflect the new value. It also
cleans up some existing tailfs references.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates all tailfs functions and the majority of the tailfs
variables to use the new drive naming.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates the tailfs file and package names to their new
naming convention.
Updates #tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
- Updates API to support renaming TailFS shares.
- Adds a CLI rename subcommand for renaming a share.
- Renames the CLI subcommand 'add' to 'set' to make it clear that
this is an add or update.
- Adds a unit test for TailFS in ipnlocal
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Previously, the configuration of which folders to share persisted across
profile changes. Now, it is tied to the user's profile.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Run yarn-deduplicate on yarn.lock to dedupe packages. This is being done
to reduce the number of redundant packages fetched by yarn when existing
versions in the lockfile satisfy the version dependency we need.
See https://github.com/scinos/yarn-deduplicate for details on the tool
used to perform this deduplication.
Updates #cleanup
Signed-off-by: Mario Minardi <mario@tailscale.com>
Starting in Vite 5, Vite now issues a deprecation warning when using
a CJS-based Vite config file. This commit fixes it by adding the
`"type": "module"` to our package.json to opt our files into ESM module
behaviours.
Fixes #cleanup
Signed-off-by: Ross Zurowski <ross@rosszurowski.com>
Update typescript to 5.3.3. This is a major bump from the previous
version of 4.8.3. This also requires adding newer versions of
@typescript-eslint/eslint-plugin and @typescript-eslint/parser to our
resolutions as eslint-config-react-app pulls in versions that otherwise
do not support typescript 5.x.
eslint-config-react-app has not been updated in 2 years and is seemingly
abandoned, so we may wish to fork it or move to a different eslint config
in the future.
Updates https://github.com/tailscale/corp/issues/17810
Signed-off-by: Mario Minardi <mario@tailscale.com>
Starts using peer capabilities to restrict the management client
on a per-view basis. This change also includes a bulky cleanup
of the login-toggle.tsx file, which was getting pretty unwieldy
in its previous form.
Updates tailscale/corp#16695
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This change adds a new apiHandler struct for use from serveAPI
to aid with restricting endpoints to specific peer capabilities.
Updates tailscale/corp#16695
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Instead of modeling remote WebDAV servers as actual
webdav.FS instances, we now just proxy traffic to them.
This not only simplifies the code, but it also allows
WebDAV locking to work correctly by making sure locks are
handled by the servers that need to (i.e. the ones actually
serving the files).
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
Update vite to 5.1.4, and vitest to 1.3.1 (their latest versions). Also
remove vite-plugin-rewrite-all as this is no longer necessary with vite
5.x and has a dependency on vite 4.x.
Updates https://github.com/tailscale/corp/issues/17715
Signed-off-by: Mario Minardi <mario@tailscale.com>
Update plugin-react-swc to the latest version (3.6.0) ahead of updating vite to 5.x.
Updates https://github.com/tailscale/corp/issues/17715
Signed-off-by: Mario Minardi <mario@tailscale.com>
Update vite-plugin-svgr to the latest version (4.2.0) ahead of updating
vite to 5.x. This is a major version bump from our previous 3.x, and
requires changing the import paths used for SVGs.
Updates https://github.com/tailscale/corp/issues/17715
Signed-off-by: Mario Minardi <mario@tailscale.com>
For user-owned nodes, only the owner is ever allowed to manage the
node.
Updates tailscale/corp#16695
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add a WebDAV-based folder sharing mechanism that is exposed to local clients at
100.100.100.100:8080 and to remote peers via a new peerapi endpoint at
/v0/tailfs.
Add the ability to manage folder sharing via the new 'share' CLI sub-command.
Updates tailscale/corp#16827
Signed-off-by: Percy Wegmann <percy@tailscale.com>
add the curly-quotes eslint plugin (same that we use for the admin
panel), and fix existing straight quotes in the current web UI.
Updates #cleanup
Signed-off-by: Will Norris <will@tailscale.com>
The new read-only mode is only accessible when running `tailscale web`
by passing a new `-readonly` flag. This new mode is identical to the
existing login mode with two exceptions:
- the management client in tailscaled is not started (though if it is
already running, it is left alone)
- the client does not prompt the user to login or switch to the
management client. Instead, a message is shown instructing the user
to use other means to manage the device.
Updates #10979
Signed-off-by: Will Norris <will@tailscale.com>
The manage client always listens on http (non-secure) port 5252. If the
login client is loaded over https, then the connectivity check to `/ok`
will fail with a mixed-content error. Mixed-content enforcement is a
browser setting that we have no control over, so there's no way around
this.
In this case of the login client being loaded over https, we skip the
connectivity check entirely. We will always render the sign-in button,
though we don't know for sure if the user has connectivity, so we
provide some additional help text in case they have trouble signing in.
Updates hassio-addons/addon-tailscale#314
Signed-off-by: Will Norris <will@tailscale.com>
Sets up peer capability types for future use within the web client
views and APIs.
Updates tailscale/corp#16695
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This is simply an extra check to prevent hypothetical issues if a prefix
such as `--prefix="javascript:alert(1)"` was provided. This isn't
really necessary since the prefix is a configuration flag provided by
the device owner, not user input. But it does enforce that we are
always interpreting the provided value as a path relative to the root.
Fixes: tailscale/corp#16268
Signed-off-by: Will Norris <will@tailscale.com>
For consistency w/ the CLI command. And to be more accurate to what
is actually happening on this action - node key is expired.
Also updates the disconnected view shown after logout.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This type seems to be a migration shim for TCP tailscaled sockets
(instead of unix/windows pipes). The `port` field was never set, so it
was effectively used as a string (`path` field).
Remove the whole type and simplify call sites to pass the socket path
directly to `safesocket.Connect`.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Throughout the web UI, we present the tailscale addresses for the
self node. In the case of the node being shared out with a user
from another tailnet, the peer viewer may actually know the node
by a different IP than the node knows itself as (Tailscale IPs
can be configured as desired on a tailnet level). This change
includes two fixes:
1. Present the self node's addresses in the frontend as the addresses
the viewing node knows it as (i.e. the addresses the viewing node
uses to access the web client).
2. We currently redirect the viewer to the Tailscale IPv4 address if
viewing it by MagicDNS name, or any other name that maps to the
Tailscale node. When doing this redirect, which is primarily added
for DNS rebinding protection, we now check the address the peer
knows this node as, and redirect to specifically that IP.
Fixestailscale/corp#16402
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Ensure we don't create Location: header URLs that have leading //, which is a
schema-less reference to arbitrary 3rd-party sites. That is, //example.com/foo
redirects off-site, while /example.com/foo is an on-site path URL.
Fixestailscale/corp#16268
Signed-off-by: Chris Palmer <cpalmer@tailscale.com>
Was previously failing to redirect to the manage client when accessing
the login client with the Tailscale IP.
Updates #10261Fixestailscale/corp#16348
Co-authored-by: Will Norris <will@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Add a new "Debug" card at the bottom of the details page. It's maybe
premature to add a separate card for this, since all it currently lists
is whether the device is using TUN mode and (for Synology) the DSM
version. But I think it may be helpful to add client connectivity data
(like shown on admin console machine page) as well as a bug report
button. Those can come soon after the 1.56 launch.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
To be safe, use `prefs.ControlURLOrDefault()` rather than the current
`prefs.ControlURL` directly.
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Calculate and set the hash of the one inline script we have in
index.html. That script is unlikely to change, so hardcoding the hash
seems fine for now.
Updates #10261
Updates tailscale/corp#16266
Signed-off-by: Will Norris <will@tailscale.com>
Completed testing of the new UI on the existing platforms that use
it. From testing, QNAP, Unraid, and Home Assistant (in addition to
Synology) all do not play well with using an exit node. For now,
we're disabling this setting from the UI. CLI should be updated to
also disallow selection of an exit node from these platforms.
All platforms still allow for advertising as an exit node.
Co-authored-by: Will Norris <will@tailscale.com>
Updates #10261
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
When displaying the login client, we check for connectivity to the
management client by calling it's /ok handler. If that response is
non-200, then there is something wrong with the management client, so
don't render the login button.
Updates #10261
Signed-off-by: Will Norris <will@tailscale.com>
Brad Fitzpatrick
Irbe Krumina
Maisem Ali
kari-ts
dependabot[bot]
Claire Wang
Charlotte Brandhorst-Satzkorn
Percy Wegmann
Mario Minardi
Kristoffer Dalby
Ross Zurowski
Sonia Appasamy
Will Norris
Andrew Lytvynov
Paul Scott
Chris Palmer