b83c273737
wgengine/filter: use IPSet for localNets instead of prefixes.
...
Part of #1177 , preparing for doing fancier set operations on
the allowed local nets.
Signed-off-by: David Anderson <danderson@tailscale.com>
2021-02-22 14:51:22 -08:00
8578b0445d
tstun: add test to send a packet after Close()
...
This test serves two purposes:
+ check that Write() returns an error if the tstun has been
closed.
+ ensure that the close-related code in tstun is exercised in
a test case. We were getting spurious code coverage adds/drops
based on timing of when the test case finished.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
2021-01-15 19:11:40 -08:00
cb96b14bf4
net/packet: remove the custom IP4/IP6 types in favor of netaddr.IP.
...
Upstream netaddr has a change that makes it alloc-free, so it's safe to
use in hot codepaths. This gets rid of one of the many IP types in our
codebase.
Performance is currently worse across the board. This is likely due in
part to netaddr.IP being a larger value type (4b -> 24b for IPv4,
16b -> 24b for IPv6), and in other part due to missing low-hanging fruit
optimizations in netaddr. However, the regression is less bad than
it looks at first glance, because we'd micro-optimized packet.IP* in
the past few weeks. This change drops us back to roughly where we
were at the 1.2 release, but with the benefit of a significant
code and architectural simplification.
name old time/op new time/op delta
pkg:tailscale.com/net/packet goos:linux goarch:amd64
Decode/tcp4-8 12.2ns ± 5% 29.7ns ± 2% +142.32% (p=0.008 n=5+5)
Decode/tcp6-8 12.6ns ± 3% 65.1ns ± 2% +418.47% (p=0.008 n=5+5)
Decode/udp4-8 11.8ns ± 3% 30.5ns ± 2% +157.94% (p=0.008 n=5+5)
Decode/udp6-8 27.1ns ± 1% 65.7ns ± 2% +142.36% (p=0.016 n=4+5)
Decode/icmp4-8 24.6ns ± 2% 30.5ns ± 2% +23.65% (p=0.016 n=4+5)
Decode/icmp6-8 22.9ns ±51% 65.5ns ± 2% +186.19% (p=0.008 n=5+5)
Decode/igmp-8 18.1ns ±44% 30.2ns ± 1% +66.89% (p=0.008 n=5+5)
Decode/unknown-8 20.8ns ± 1% 10.6ns ± 9% -49.11% (p=0.016 n=4+5)
pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64
Filter/icmp4-8 30.5ns ± 1% 77.9ns ± 3% +155.01% (p=0.008 n=5+5)
Filter/tcp4_syn_in-8 43.7ns ± 3% 123.0ns ± 3% +181.72% (p=0.008 n=5+5)
Filter/tcp4_syn_out-8 24.5ns ± 2% 45.7ns ± 6% +86.22% (p=0.008 n=5+5)
Filter/udp4_in-8 64.8ns ± 1% 210.0ns ± 2% +223.87% (p=0.008 n=5+5)
Filter/udp4_out-8 119ns ± 0% 278ns ± 0% +133.78% (p=0.016 n=4+5)
Filter/icmp6-8 40.3ns ± 2% 204.4ns ± 4% +407.70% (p=0.008 n=5+5)
Filter/tcp6_syn_in-8 35.3ns ± 3% 199.2ns ± 2% +464.95% (p=0.008 n=5+5)
Filter/tcp6_syn_out-8 32.8ns ± 2% 81.0ns ± 2% +147.10% (p=0.008 n=5+5)
Filter/udp6_in-8 106ns ± 2% 290ns ± 2% +174.48% (p=0.008 n=5+5)
Filter/udp6_out-8 184ns ± 2% 314ns ± 3% +70.43% (p=0.016 n=4+5)
pkg:tailscale.com/wgengine/tstun goos:linux goarch:amd64
Write-8 9.02ns ± 3% 8.92ns ± 1% ~ (p=0.421 n=5+5)
name old alloc/op new alloc/op delta
pkg:tailscale.com/net/packet goos:linux goarch:amd64
Decode/tcp4-8 0.00B 0.00B ~ (all equal)
Decode/tcp6-8 0.00B 0.00B ~ (all equal)
Decode/udp4-8 0.00B 0.00B ~ (all equal)
Decode/udp6-8 0.00B 0.00B ~ (all equal)
Decode/icmp4-8 0.00B 0.00B ~ (all equal)
Decode/icmp6-8 0.00B 0.00B ~ (all equal)
Decode/igmp-8 0.00B 0.00B ~ (all equal)
Decode/unknown-8 0.00B 0.00B ~ (all equal)
pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64
Filter/icmp4-8 0.00B 0.00B ~ (all equal)
Filter/tcp4_syn_in-8 0.00B 0.00B ~ (all equal)
Filter/tcp4_syn_out-8 0.00B 0.00B ~ (all equal)
Filter/udp4_in-8 0.00B 0.00B ~ (all equal)
Filter/udp4_out-8 16.0B ± 0% 64.0B ± 0% +300.00% (p=0.008 n=5+5)
Filter/icmp6-8 0.00B 0.00B ~ (all equal)
Filter/tcp6_syn_in-8 0.00B 0.00B ~ (all equal)
Filter/tcp6_syn_out-8 0.00B 0.00B ~ (all equal)
Filter/udp6_in-8 0.00B 0.00B ~ (all equal)
Filter/udp6_out-8 48.0B ± 0% 64.0B ± 0% +33.33% (p=0.008 n=5+5)
name old allocs/op new allocs/op delta
pkg:tailscale.com/net/packet goos:linux goarch:amd64
Decode/tcp4-8 0.00 0.00 ~ (all equal)
Decode/tcp6-8 0.00 0.00 ~ (all equal)
Decode/udp4-8 0.00 0.00 ~ (all equal)
Decode/udp6-8 0.00 0.00 ~ (all equal)
Decode/icmp4-8 0.00 0.00 ~ (all equal)
Decode/icmp6-8 0.00 0.00 ~ (all equal)
Decode/igmp-8 0.00 0.00 ~ (all equal)
Decode/unknown-8 0.00 0.00 ~ (all equal)
pkg:tailscale.com/wgengine/filter goos:linux goarch:amd64
Filter/icmp4-8 0.00 0.00 ~ (all equal)
Filter/tcp4_syn_in-8 0.00 0.00 ~ (all equal)
Filter/tcp4_syn_out-8 0.00 0.00 ~ (all equal)
Filter/udp4_in-8 0.00 0.00 ~ (all equal)
Filter/udp4_out-8 1.00 ± 0% 1.00 ± 0% ~ (all equal)
Filter/icmp6-8 0.00 0.00 ~ (all equal)
Filter/tcp6_syn_in-8 0.00 0.00 ~ (all equal)
Filter/tcp6_syn_out-8 0.00 0.00 ~ (all equal)
Filter/udp6_in-8 0.00 0.00 ~ (all equal)
Filter/udp6_out-8 1.00 ± 0% 1.00 ± 0% ~ (all equal)
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-12-22 14:44:36 -08:00
7a54910990
wgengine/filter: remove helper vars, mark NewAllowAll test-only.
...
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-09 22:02:37 -08:00
76d99cf01a
wgengine/filter: remove the Matches type.
...
It only served to obscure the underlying slice type without
adding much value.
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-09 21:39:25 -08:00
b3634f020d
wgengine/filter: use netaddr types in public API.
...
We still use the packet.* alloc-free types in the data path, but
the compilation from netaddr to packet happens within the filter
package.
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-09 21:39:25 -08:00
427bf2134f
net/packet: rename from wgengine/packet.
...
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-09 16:25:24 -08:00
19df6a2ee2
wgengine/packet: rename types to reflect their v4-only-ness, document.
...
Signed-off-by: David Anderson <danderson@tailscale.com>
2020-11-09 16:25:24 -08:00
5041800ac6
wgengine/tstun/faketun: it's a null tunnel, not a loopback.
...
At some point faketun got implemented as a loopback (put a packet in
from wireguard, the same packet goes back to wireguard) which is not
useful. It's supposed to be an interface that just sinks all packets,
and then wgengine adds *only* and ICMP Echo responder as a layer on
top.
This caused extremely odd bugs on darwin, where the special case that
reinjects packets from local->local was filling the loopback channel
and creating an infinite loop (which became jammed since the reader and
writer were in the same goroutine).
Signed-off-by: Avery Pennarun <apenwarr@tailscale.com>
2020-10-08 01:01:39 -04:00
10ac066013
all: fix vet warnings
2020-07-16 08:39:38 -07:00
23e74a0f7a
wgengine, magicsock, tstun: don't regularly STUN when idle (mobile only for now)
...
If there's been 5 minutes of inactivity, stop doing STUN lookups. That
means NAT mappings will expire, but they can resume later when there's
activity again.
We'll do this for all platforms later.
Updates tailscale/corp#320
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-06-25 19:14:24 -07:00
511840b1f6
tsdns: initial implementation of a Tailscale DNS resolver ( #396 )
...
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-06-08 18:19:26 -04:00
02231e968e
wgengine/tstun: add tests and benchmarks ( #436 )
...
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-06-05 11:19:03 -04:00
David Anderson
Denton Gentry
Avery Pennarun
Brad Fitzpatrick
Dmytro Shynkevych