In prep for most of the package funcs in net/interfaces to become
methods in a long-lived netmon.Monitor that can cache things. (Many
of the funcs are very heavy to call regularly, whereas the long-lived
netmon.Monitor can subscribe to things from the OS and remember
answers to questions it's asked regularly later)
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: Ie4e8dedb70136af2d611b990b865a822cd1797e5
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This has been a TODO for ages. Time to do it.
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached.
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I60fc6508cd2d8d079260bda371fc08b6318bcaf1
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Previously it was both metadata about the class of warnable item as
well as the value.
Now it's only metadata and the value is per-Tracker.
Updates #11874
Updates #4136
Change-Id: Ia1ed1b6c95d34bc5aae36cffdb04279e6ba77015
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves most of the health package global variables to a new
`health.Tracker` type.
But then rather than plumbing the Tracker in tsd.System everywhere,
this only goes halfway and makes one new global Tracker
(`health.Global`) that all the existing callers now use.
A future change will eliminate that global.
Updates #11874
Updates #4136
Change-Id: I6ee27e0b2e35f68cb38fecdb3b2dc4c3f2e09d68
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This helps reduce memory pressure on tailnets with large numbers
of routes.
Updates tailscale/corp#19332
Signed-off-by: Percy Wegmann <percy@tailscale.com>
* cmd/containerboot,util/linuxfw: support proxy backends specified by DNS name
Adds support for optionally configuring containerboot to proxy
traffic to backends configured by passing TS_EXPERIMENTAL_DEST_DNS_NAME env var
to containerboot.
Containerboot will periodically (every 10 minutes) attempt to resolve
the DNS name and ensure that all traffic sent to the node's
tailnet IP gets forwarded to the resolved backend IP addresses.
Currently:
- if the firewall mode is iptables, traffic will be load balanced
accross the backend IP addresses using round robin. There are
no health checks for whether the IPs are reachable.
- if the firewall mode is nftables traffic will only be forwarded
to the first IP address in the list. This is to be improved.
* cmd/k8s-operator: support ExternalName Services
Adds support for exposing endpoints, accessible from within
a cluster to the tailnet via DNS names using ExternalName Services.
This can be done by annotating the ExternalName Service with
tailscale.com/expose: "true" annotation.
The operator will deploy a proxy configured to route tailnet
traffic to the backend IPs that service.spec.externalName
resolves to. The backend IPs must be reachable from the operator's
namespace.
Updates tailscale/tailscale#10606
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
The Network Location Awareness service identifies networks authenticated against
an Active Directory domain and categorizes them as "Domain Authenticated".
This includes the Tailscale network if a Domain Controller is reachable through it.
If a network is categories as NLM_NETWORK_CATEGORY_DOMAIN_AUTHENTICATED,
it is not possible to override its category, and we shouldn't attempt to do so.
Additionally, our Windows Firewall rules should be compatible with both private
and domain networks.
This fixes both issues.
Fixes#11813
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Most of the magicsock tests fake the network, simulating packets going
out and coming in. There's no reason to actually hit your router to do
UPnP/NAT-PMP/PCP during in tests. But while debugging thousands of
iterations of tests to deflake some things, I saw it slamming my
router. This stops that.
Updates #11762
Change-Id: I59b9f48f8f5aff1fa16b4935753d786342e87744
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Seems to deflake tstest/integration tests. I can't reproduce it
anymore on one of my VMs that was consistently flaking after a dozen
runs before. Now I can run hundreds of times.
Updates #11649Fixes#7036
Change-Id: I2f7d4ae97500d507bdd78af9e92cd1242e8e44b8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I'm on a mission to simplify LocalBackend.Start and its locking
and deflake some tests.
I noticed this hasn't been used since March 2023 when it was removed
from the Windows client in corp 66be796d33c.
So, delete.
Updates #11649
Change-Id: I40f2cb75fb3f43baf23558007655f65a8ec5e1b2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have seen in macOS client logs that the "operation not permitted", a
syscall.EPERM error, is being returned when traffic is attempted to be
sent. This may be caused by security software on the client.
This change will perform a rebind and restun if we receive a
syscall.EPERM error on clients running darwin. Rebinds will only be
called if we haven't performed one specifically for an EPERM error in
the past 5 seconds.
Updates #11710
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Trying to run iptables/nftables on Synology pauses for minutes with
lots of errors and ultimately does nothing as it's not used and we
lack permissions.
This fixes a regression from db760d0bac (#11601) that landed
between Synology testing on unstable 1.63.110 and 1.64.0 being cut.
Fixes#11737
Change-Id: Iaf9563363b8e45319a9b6fe94c8d5ffaecc9ccef
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Just because we don't have known endpoints for a peer does not mean that
the peer should become unreachable. If we know the peers key, it should
be able to call us, then we can talk back via whatever path it called us
on. First step - don't drop the packet in this context.
Updates tailscale/corp#19106
Signed-off-by: James Tucker <james@tailscale.com>
This removes a potentially increased boot delay for certain boot
topologies where they block on ExecStartPre that may have socket
activation dependencies on other system services (such as
systemd-resolved and NetworkManager).
Also rename cleanup to clean up in affected/immediately nearby places
per code review commentary.
Fixes#11599
Signed-off-by: James Tucker <james@tailscale.com>
It was used when we only supported subnet routers on linux
and would nil out the SubnetRoutes slice as no other router
worked with it, but now we support subnet routers on ~all platforms.
The field it was setting to nil is now only used for network logging
and nowhere else, so keep the field but drop the SubnetRouterWrapper
as it's not useful.
Updates #cleanup
Change-Id: Id03f9b6ec33e47ad643e7b66e07911945f25db79
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The netcheck package and the magicksock package coordinate via the
health package, but both sides have time based heuristics through
indirect dependencies. These were misaligned, so the implemented
heuristic aimed at reducing DERP moves while there is active traffic
were non-operational about 3/5ths of the time.
It is problematic to setup a good test for this integration presently,
so instead I added comment breadcrumbs along with the initial fix.
Updates #8603
Signed-off-by: James Tucker <james@tailscale.com>
Only on Gokrazy, set sysctls to enable IP forwarding so subnet routing
and advertised exit node works.
Fixes#11405
Signed-off-by: Joonas Kuorilehto <joneskoo@derbian.fi>
This allows clients to avoid establishing their VPN multiple times when
both routes and DNS are changing in rapid succession.
Updates tailscale/corp#18928
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This change updates all tailfs functions and the majority of the tailfs
variables to use the new drive naming.
Updates tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
This change updates the tailfs file and package names to their new
naming convention.
Updates #tailscale/corp#16827
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
We have hosts that support IPv6, but not IPv6 firewall configuration
in iptables mode.
We also have hosts that have some support for IPv6 firewall
configuration in iptables mode, but do not have iptables filter table.
We should:
- configure ip rules for all hosts that support IPv6
- only configure firewall rules in iptables mode if the host
has iptables filter table.
Updates tailscale/tailscale#11540
Signed-off-by: Irbe Krumina <irbe@tailscale.com>
Use the zstdframe package where sensible instead of plumbing
around our own zstd.Encoder just for stateless operations.
This causes logtail to have a dependency on zstd,
but that's arguably okay since zstd support is implicit
to the protocol between a client and the logging service.
Also, virtually every caller to logger.NewLogger was
manually setting up a zstd.Encoder anyways,
meaning that zstd was functionally always a dependency.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This fixes a bug that was introduced in #11258 where the handling of the
per-client limit didn't properly account for the fact that the gVisor
TCP forwarder will return 'true' to indicate that it's handled a
duplicate SYN packet, but not launch the handler goroutine.
In such a case, we neither decremented our per-client limit in the
wrapper function, nor did we do so in the handler function, leading to
our per-client limit table slowly filling up without bound.
Fix this by doing the same duplicate-tracking logic that the TCP
forwarder does so we can detect such cases and appropriately decrement
our in-flight counter.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib6011a71d382a10d68c0802593f34b8153d06892
This pretty much always results in an outage because peers won't
discover our new home region and thus won't be able to establish
connectivity.
Updates tailscale/corp#18095
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ic0d09133f198b528dd40c6383b16d7663d9d37a7
The `stack.PacketBufferPtr` type no longer exists; replace it with
`*stack.PacketBuffer` instead.
Updates #8043
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ib56ceff09166a042aa3d9b80f50b2aa2d34b3683
Since link-local addresses are definitionally more likely to be a direct
(lower-latency, more reliable) connection than a non-link-local private
address, give those a bit of a boost when selecting endpoints.
Updates #8097
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I93fdeb07de55ba39ba5fcee0834b579ca05c2a4e
This was just added in 69f4b459 which doesn't yet use it. This still
doesn't yet use it. It just pushes it down deeper into magicsock where
it'll used later.
Updates #7617
Change-Id: If2f8fd380af150ffc763489e1ff4f8ca2899fac6
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This fixes a regression introduced with 993acf4 and released in
v1.60.0.
The regression caused us to intercept all userspace traffic to port
8080 which prevented users from exposing their own services to their
tailnet at port 8080.
Now, we only intercept traffic to port 8080 if it's bound for
100.100.100.100 or fd7a:115c:a1e0::53.
Fixes#11283
Signed-off-by: Percy Wegmann <percy@tailscale.com>
(cherry picked from commit 17cd0626f3)
This adds a method to wgengine.Engine and plumbed down into magicsock
to add a way to get a type-safe Tailscale-safe wrapper around a
wireguard-go device.Peer that only exposes methods that are safe for
Tailscale to use internally.
It also removes HandshakeAttempts from PeerStatusLite that was just
added as it wasn't needed yet and is now accessible ala cart as needed
from the Peer type accessor.
None of this is used yet.
Updates #7617
Change-Id: I07be0c4e6679883e6eeddf8dbed7394c9e79c5f4
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
... rather than 1970. Code was using IsZero against the 1970 team
(which isn't a zero value), but fortunately not anywhere that seems to
have mattered.
Updates #cleanup
Change-Id: I708a3f2a9398aaaedc9503678b4a8a311e0e019e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is a fun one. Right now, when a client is connecting through a
subnet router, here's roughly what happens:
1. The client initiates a connection to an IP address behind a subnet
router, and sends a TCP SYN
2. The subnet router gets the SYN packet from netstack, and after
running through acceptTCP, starts DialContext-ing the destination IP,
without accepting the connection¹
3. The client retransmits the SYN packet a few times while the dial is
in progress, until either...
4. The subnet router successfully establishes a connection to the
destination IP and sends the SYN-ACK back to the client, or...
5. The subnet router times out and sends a RST to the client.
6. If the connection was successful, the client ACKs the SYN-ACK it
received, and traffic starts flowing
As a result, the notification code in forwardTCP never notices when a
new connection attempt is aborted, and it will wait until either the
connection is established, or until the OS-level connection timeout is
reached and it aborts.
To mitigate this, add a per-client limit on how many in-flight TCP
forwarding connections can be in-progress; after this, clients will see
a similar behaviour to the global limit, where new connection attempts
are aborted instead of waiting. This prevents a single misbehaving
client from blocking all other clients of a subnet router by ensuring
that it doesn't starve the global limiter.
Also, bump the global limit again to a higher value.
¹ We can't accept the connection before establishing a connection to the
remote server since otherwise we'd be opening the connection and then
immediately closing it, which breaks a bunch of stuff; see #5503 for
more details.
Updates tailscale/corp#12184
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I76e7008ddd497303d75d473f534e32309c8a5144
Not yet used. This is being made available so magicsock/wgengine can
use it to ignore certain sends (UDP + DERP) later on at least mobile,
letting wireguard-go think it's doing its full attempt schedule, but
we can cut it short conditionally based on what we know from the
control plane.
Updates #7617
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ia367cf6bd87b2aeedd3c6f4989528acdb6773ca7
Otherwise on OS retransmits, we'd make redundant timers in Go's timer
heap that upon firing just do nothing (well, grab a mutex and check a
map and see that there's nothing to do).
Updates #cleanup
Change-Id: Id30b8b2d629cf9c7f8133a3f7eca5dc79e81facb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
No need to hold wgLock while using the device to LookupPeer;
that has its own mutex already.
Updates #cleanup
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Change-Id: Ib56049fcc7163cf5a2c2e7e12916f07b4f9d67cb
Tailscaled becomes inoperative if the Tailscale Tunnel wintun adapter is abruptly removed.
wireguard-go closes the device in case of a read error, but tailscaled keeps running.
This adds detection of a closed WireGuard device, triggering a graceful shutdown of tailscaled.
It is then restarted by the tailscaled watchdog service process.
Fixes#11222
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Andrew Dunham
Brad Fitzpatrick
Percy Wegmann
Irbe Krumina
Nick Khyl
Claire Wang
Charlotte Brandhorst-Satzkorn
James Tucker
Maisem Ali
Joonas Kuorilehto
Joe Tsai