This adds a variant for Connect that takes in a context.Context
which allows passing through cancellation etc by the caller.
Updates tailscale/corp#18266
Signed-off-by: Maisem Ali <maisem@tailscale.com>
The goal is to move more network state accessors to netmon.Monitor
where they can be cheaper/cached. But first (this change and others)
we need to make sure the one netmon.Monitor is plumbed everywhere.
Some notable bits:
* tsdial.NewDialer is added, taking a now-required netmon
* because a tsdial.Dialer always has a netmon, anything taking both
a Dialer and a NetMon is now redundant; take only the Dialer and
get the NetMon from that if/when needed.
* netmon.NewStatic is added, primarily for tests
Updates tailscale/corp#10910
Updates tailscale/corp#18960
Updates #7967
Updates #3299
Change-Id: I877f9cb87618c4eb037cee098241d18da9c01691
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a health.Tracker to tsd.System, accessible via
a new tsd.System.HealthTracker method.
In the future, that new method will return a tsd.System-specific
HealthTracker, so multiple tsnet.Servers in the same process are
isolated. For now, though, it just always returns the temporary
health.Global value. That permits incremental plumbing over a number
of changes. When the second to last health.Global reference is gone,
then the tsd.System.HealthTracker implementation can return a private
Tracker.
The primary plumbing this does is adding it to LocalBackend and its
dozen and change health calls. A few misc other callers are also
plumbed. Subsequent changes will flesh out other parts of the tree
(magicsock, controlclient, etc).
Updates #11874
Updates #4136
Change-Id: Id51e73cfc8a39110425b6dc19d18b3975eac75ce
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Use the zstdframe package where sensible instead of plumbing
around our own zstd.Encoder just for stateless operations.
This causes logtail to have a dependency on zstd,
but that's arguably okay since zstd support is implicit
to the protocol between a client and the logging service.
Also, virtually every caller to logger.NewLogger was
manually setting up a zstd.Encoder anyways,
meaning that zstd was functionally always a dependency.
Updates #cleanup
Updates tailscale/corp#18514
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
From a packet trace we have seen log connections being closed
prematurely by the client, resulting in unnecessary extra TLS setup
traffic.
Updates #3363
Updates tailscale/corp#9230
Updates tailscale/corp#8564
Signed-off-by: James Tucker <james@tailscale.com>
Previously, for Windows clients only, a registry value named LogTarget
could override the log server, but only if the environment variable was
unset.
To allow administrators to enforce using a particular log server, switch
this to make the registry value take precedence over the environment
variable, and switch to the newer syspolicy.GetString so that the log
target can be specified by a GPO more easily.
Updates ENG-2515
Change-Id: Ia618986b0e07715d7db4c6df170a24d511c904c9
Signed-off-by: Adrian Dewhurst <adrian@tailscale.com>
This type seems to be a migration shim for TCP tailscaled sockets
(instead of unix/windows pipes). The `port` field was never set, so it
was effectively used as a string (`path` field).
Remove the whole type and simplify call sites to pass the socket path
directly to `safesocket.Connect`.
Updates #cleanup
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This allows sending logs from the "logpolicy" package (and associated
callees) to something other than the log package. The behaviour for
tailscaled remains the same, passing in log.Printf
Updates #8249
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: Ie1d43b75fa7281933d9225bffd388462c08a5f31
On some platforms (notably macOS and iOS) we look up the default
interface to bind outgoing connections to. This is both duplicated
work and results in logspam when the default interface is not available
(i.e. when a phone has no connectivity, we log an error and thus cause
more things that we will try to upload and fail).
Fixed by passing around a netmon.Monitor to more places, so that we can
use its cached interface state.
Fixes#7850
Updates #7621
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Redoes the approach from #5550 and #7539 to explicitly pass in the logf
function, instead of having global state that can be overridden.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The log ID types were moved to a separate package so that
code that only depend on log ID types do not need to link
in the logic for the logtail client itself.
Not all code need the logtail client.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Callers of LogHost often jump through hoops to undo the
loss of information dropped by LogHost (e.g., the HTTP scheme).
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
The version.CmdName implementation is buggy such that it does not correctly
identify the binary name if it embeds other go binaries.
For now, add a NewWithConfigPath API that allows the caller to explicitly
specify this information.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
As noted in #5617, our documented method of blocking log.tailscale.io
DNS no longer works due to bootstrap DNS.
Instead, provide an explicit flag (--no-logs-no-support) and/or env
variable (TS_NO_LOGS_NO_SUPPORT=true) to explicitly disable logcatcher
uploads. It also sets a bit on Hostinfo to say that the node is in that
mode so we can end any support tickets from such nodes more quickly.
This does not yet provide an easy mechanism for users on some
platforms (such as Windows, macOS, Synology) to set flags/env. On
Linux you'd used /etc/default/tailscaled typically. Making it easier
to set flags for other platforms is tracked in #5114.
Fixes#5617Fixestailscale/corp#1475
Change-Id: I72404e1789f9e56ec47f9b7021b44c025f7a373a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Just reading the code again in prep for some alloc reductions.
Change-Id: I065226ea794b7ec7144c2b15942d35131c9313a8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Ongoing log writing keeps the spinning disks from hibernating.
Extends earlier implementation for Synology to also handle QNAP.
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
If ConfigFromFile cannot find the configuration file,
we must not initialize it with NewConfig.
Instead, we need it to fail validation so that it eventually writes
a newly constructed configuration file.
Otherwise, new tailscale instances will never be able store a persistent
log config and start with a new config file upon every bootup.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
refactor logpolicy config loading to make it easier to reuse from
outside the package. Within tsnet, setup a basic logtail config.
Signed-off-by: Will Norris <will@tailscale.com>
Allows instances that are running with the same machine ID (due to
cloning) to be distinguished.
Also adds sequence numbers to detect duplicates.
For tailscale/corp#5244
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
A new package can also later record/report which knobs are checked and
set. It also makes the code cleaner & easier to grep for env knobs.
Change-Id: Id8a123ab7539f1fadbd27e0cbeac79c2e4f09751
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This is for use by the Windows GUI client to log via when an
exit node is in use, so the logs don't go out via the exit node and
instead go directly, like tailscaled's. The dialer tried to do that
in the unprivileged GUI by binding to a specific interface, but the
"Internet Kill Switch" installed by tailscaled for exit nodes
precludes that from working and instead the GUI fails to dial out.
So, go through tailscaled (with a CONNECT request) instead.
Fixestailscale/corp#3169
Change-Id: I17a8efdc1d4b8fed53a29d1c19995592b651b215
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This moves the Windows-only initialization of the filelogger into
logpolicy. Previously we only did it when babysitting the tailscaled
subprocess, but this meant that log messages from the service itself
never made it to disk. Examples that weren't logged to disk:
* logtail unable to dial out,
* DNS flush messages from the service
* svc.ChangeRequest messages (#3581)
This is basically the same fix as #3571 but staying in the Logf type,
and avoiding build-tagged file (which wasn't quite a goal, but
happened and seemed nice)
Fixes#3570
Co-authored-by: Aaron Klotz <aaron@tailscale.com>
Change-Id: Iacd80c4720b7218365ec80ae143339d030842702
Android doesn't use logpolicy and currently has enough
unique stuff about its logging that makes it difficult to
do so. For example, its logsDir comes from Gio.
Export NewLogtailTransport to let Android use it.
Updates https://github.com/tailscale/tailscale/issues/3046
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
tailscale-ipn.exe (the GUI) shouldn't use C:\ProgramData.
Also, migrate the earlier misnamed wg32/wg64 conf files if they're present.
(That was stopped in 2db877caa3, but the
files exist from fresh 1.14 installs)
Updates #2856
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
C:\WINDOWS\system32\config\systemprofile\AppData\Local\
is frequently cleared for almost any reason: Windows updates,
System Restore, even various System Cleaner utilities.
The server-state.conf file in AppData\Local could be deleted
at any time, which would break login until the node is removed
from the Admin Panel allowing it to create a new key.
Carefully copy any AppData state to ProgramData at startup.
If copying the state fails, continue to use AppData so at
least there will be connectivity. If there is no state,
use ProgramData.
We also migrate the log.conf file. Very old versions of
Tailscale named the EXE tailscale-ipn, so the log conf was
tailscale-ipn.log.conf and more recent versions preserved
this filename and cmdName in logs. In this migration we
always update the filename to
c:\ProgramData\Tailscale\tailscaled.log.conf
Updates https://github.com/tailscale/tailscale/issues/2856
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Given that https://github.com/golang/go/issues/42888 is coming, this
catches most practical panics without interfering in our development
environments.
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
Filch doesn't like having multiple processes competing
for the same log files (#937).
Parallel integration tests were all using the same log files.
Add a TS_LOGS_DIR env var that the integration test can use
to use separate log files per test.
Fixes#2269
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Maisem Ali
Brad Fitzpatrick
Joe Tsai
James Tucker
Adrian Dewhurst
Andrew Lytvynov
Claire Wang
Andrew Dunham
Mihai Parparita
Will Norris
David Anderson
Josh Soref
Eng Zer Jun
Denton Gentry
Will Norris
Josh Bleecher Snyder
nicksherron
David Crawshaw
Christine Dodrill