* move probing out of netcheck into new net/portmapper package
* use PCP ANNOUNCE op codes for PCP discovery, rather than causing
short-lived (sub-second) side effects with a 1-second-expiring map +
delete.
* track when we heard things from the router so we can be less wasteful
in querying the router's port mapping services in the future
* use portmapper from magicsock to map a public port
Fixes#1298Fixes#1080Fixes#1001
Updates #864
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This allows proxy URLs such as:
http://azurediamond:hunter2@192.168.122.154:38274
to be used in order to dial out to control, logs or derp servers.
Signed-off-by: Christine Dodrill <xe@tailscale.com>
The interface.State logging tried to only log interfaces which had
interesting IPs, but the what-is-interesting checks differed between
the code that gathered the interface names to print and the printing
of their addresses.
Upstream wireguard-go decided to use errors.Is(err, net.ErrClosed)
instead of checking the error string.
It also provided an unsafe linknamed version of net.ErrClosed
for clients running Go 1.15. Switch to that.
This reduces the time required for the wgengine/magicsock tests
on my machine from ~35s back to the ~13s it was before
456cf8a376.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
Unused for now, but I want to backport this commit to 1.4 so 1.6 can
start sending these and then at least 1.4 logs will stringify nicely.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The code was using a C "int", which is a signed 32-bit integer.
That means some valid IP addresses were negative numbers.
(In particular, the default router address handed out by AT&T
fiber: 192.168.1.254. No I don't know why they do that.)
A negative number is < 255, and so was treated by the Go code
as an error.
This fixes the unit test failure:
$ go test -v -run=TestLikelyHomeRouterIPSyscallExec ./net/interfaces
=== RUN TestLikelyHomeRouterIPSyscallExec
interfaces_darwin_cgo_test.go:15: syscall() = invalid IP, false, netstat = 192.168.1.254, true
--- FAIL: TestLikelyHomeRouterIPSyscallExec (0.00s)
Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
Windows has a low resolution timer.
Some of the tests assumed that unblock takes effect immediately.
Consider:
t := time.Now()
elapsed := time.Now().After(t)
It seems plausible that elapsed should always be true.
However, with a low resolution timer, that might fail.
Change time.Now().After to !time.Now().Before,
so that unblocking always takes effect immediately.
Fixes#873.
This adds a new IP Protocol type, TSMP on protocol number 99 for
sending inter-tailscale messages over WireGuard, currently just for
why a peer rejects TCP SYNs (ACL rejection, shields up, and in the
future: nothing listening, something listening on that port but wrong
interface, etc)
Updates #1094
Updates tailscale/corp#1185
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Users in Amsterdam (as one example) were flipping back and forth
between equidistant London & Frankfurt relays too much.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In practice, we already provide IPv6 endpoint addresses via netcheck,
and that address is likely to match a local address anyway (i.e. no NAT66).
The comment at that piece of the code mentions needing to figure out a
good priority ordering, but that only applies to non-active-discovery
clients, who already don't do anything with IPv6 addresses.
Signed-off-by: David Anderson <danderson@tailscale.com>
likelyHomeRouterIPDarwinSyscall iterates through the list of routes,
looking for a private gateway, returning the first one it finds.
likelyHomeRouterIPDarwinExec does the same thing,
except that it returns the last one it finds.
As a result, when there are multiple gateways,
TestLikelyHomeRouterIPSyscallExec fails.
(At least, I think that that is what is happening;
I am going inferring from observed behavior.)
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
The compiler is failing to draw the connection between
slice cap and slice len, so is missing some obvious BCE opportunities.
Give it a hint by making the cap equal to the length.
The generated code is smaller and cleaner, and a bit faster.
name old time/op new time/op delta
Decode/tcp4-8 12.2ns ± 1% 11.6ns ± 3% -5.31% (p=0.000 n=28+29)
Decode/tcp6-8 12.5ns ± 2% 11.9ns ± 2% -4.84% (p=0.000 n=30+30)
Decode/udp4-8 11.5ns ± 1% 11.1ns ± 1% -3.11% (p=0.000 n=25+24)
Decode/udp6-8 11.8ns ± 3% 11.4ns ± 1% -3.08% (p=0.000 n=30+26)
Decode/icmp4-8 11.0ns ± 3% 10.6ns ± 1% -3.38% (p=0.000 n=25+30)
Decode/icmp6-8 11.4ns ± 1% 11.1ns ± 2% -2.29% (p=0.000 n=27+30)
Decode/igmp-8 10.3ns ± 0% 10.0ns ± 1% -3.26% (p=0.000 n=19+23)
Decode/unknown-8 8.68ns ± 1% 8.38ns ± 1% -3.55% (p=0.000 n=28+29)
Cache DNS results of earlier login.tailscale.com control dials, and use
them for future dials if DNS is slow or broken.
Fixes various issues with trickier setups with the domain's DNS server
behind a subnet router.
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The packet filter still rejects all IPv6, but decodes enough from v6
packets to do something smarter in a followup.
name time/op
Decode/tcp4-8 28.8ns ± 2%
Decode/tcp6-8 20.6ns ± 1%
Decode/udp4-8 28.2ns ± 1%
Decode/udp6-8 20.0ns ± 6%
Decode/icmp4-8 21.7ns ± 2%
Decode/icmp6-8 14.1ns ± 2%
Decode/unknown-8 9.43ns ± 2%
Signed-off-by: David Anderson <danderson@tailscale.com>
Brad Fitzpatrick
Christine Dodrill
Josh Bleecher Snyder
David Crawshaw
David Anderson
Denton Gentry