I'm not saying it works, but it compiles.
Updates #5794
Change-Id: I2f3c99732e67fe57a05edb25b758d083417f083e
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The retry logic was pathological in the following ways:
* If we restarted the logging service, any pending uploads
would be placed in a retry-loop where it depended on backoff.Backoff,
which was too aggresive. It would retry failures within milliseconds,
taking at least 10 retries to hit a delay of 1 second.
* In the event where a logstream was rate limited,
the aggressive retry logic would severely exacerbate the problem
since each retry would also log an error message.
It is by chance that the rate of log error spam
does not happen to exceed the rate limit itself.
We modify the retry logic in the following ways:
* We now respect the "Retry-After" header sent by the logging service.
* Lacking a "Retry-After" header, we retry after a hard-coded period of
30 to 60 seconds. This avoids the thundering-herd effect when all nodes
try reconnecting to the logging service at the same time after a restart.
* We do not treat a status 400 as having been uploaded.
This is simply not the behavior of the logging service.
Updates #tailscale/corp#11213
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
We're using it in more and more places, and it's not really specific to
our use of Wireguard (and does more just link/interface monitoring).
Also removes the separate interface we had for it in sockstats -- it's
a small enough package (we already pull in all of its dependencies
via other paths) that it's not worth the extra complexity.
Updates #7621
Updates #7850
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Using log.Printf may end up being printed out to the console, which
is not desirable. I noticed this when I was investigating some client
logs with `sockstats: trace "NetcheckClient" was overwritten by another`.
That turns to be harmless/expected (the netcheck client will fall back
to the DERP client in some cases, which does its own sockstats trace).
However, the log output could be visible to users if running the
`tailscale netcheck` CLI command, which would be needlessly confusing.
Updates tailscale/corp#9230
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Split apart polling of sockstats and logging them to disk. Add a 3
second delay before writing logs to disk to prevent an infinite upload
loop when uploading stats to logcatcher.
Fixes#7719
Signed-off-by: Will Norris <will@tailscale.com>
Effectively reverts #249, since the server side was fixed (with #251?)
to send a 200 OK/content-length 0 response.
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Makes it cheaper/simpler to persist values, and encourages reuse of
labels as opposed to generating an arbitrary number.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Share the same underlying implementation for both PrivateID and PublicID.
For the shared methods, declare them in the same order.
Only keep documentation on methods without obvious meaning.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Uses the hooks added by tailscale/go#45 to instrument the reads and
writes on the major code paths that do network I/O in the client. The
convention is to use "<package>.<type>:<label>" as the annotation for
the responsible code path.
Enabled on iOS, macOS and Android only, since mobile platforms are the
ones we're most interested in, and we are less sensitive to any
throughput degradation due to the per-I/O callback overhead (macOS is
also enabled for ease of testing during development).
For now just exposed as counters on a /v0/sockstats PeerAPI endpoint.
We also keep track of the current interface so that we can break out
the stats by interface.
Updates tailscale/corp#9230
Updates #3363
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
The log ID types were moved to a separate package so that
code that only depend on log ID types do not need to link
in the logic for the logtail client itself.
Not all code need the logtail client.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The 255 byte limit was chosen more than 3 years ago (tailscale/corp@929635c9d9),
when iOS was operating under much more significant memory constraints.
With iOS 15 the network extension has an increased limit, so increasing
it to 4K should be fine.
The motivating factor was that the network interfaces being logged
by linkChange in wgengine/userspace.go were getting truncated, and it
would be useful to know why in some cases we're choosing the pdp_ip1
cell interface instead of the pdp_ip0 one.
Updates #7184
Updates #7188
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
This updates all source files to use a new standard header for copyright
and license declaration. Notably, copyright no longer includes a date,
and we now use the standard SPDX-License-Identifier header.
This commit was done almost entirely mechanically with perl, and then
some minimal manual fixes.
Updates #6865
Signed-off-by: Will Norris <will@tailscale.com>
Instead of a static FlushDelay configuration value, use a FlushDelayFn
function that we invoke every time we decide send logs. This will allow
mobile clients to be more dynamic about when to send logs.
Updates #6768
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Many packages reference the logtail ID types,
but unfortunately pull in the transitive dependencies of logtail.
Fix this problem by putting the log ID types in its own package
with minimal dependencies.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
This function is no longer necessary as you can trivially rewrite:
logtail.MustParsePublicID(...)
with:
must.Get(logtail.ParsePublicID(...))
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The //go:build syntax was introduced in Go 1.17:
https://go.dev/doc/go1.17#build-lines
gofmt has kept the +build and go:build lines in sync since
then, but enough time has passed. Time to remove them.
Done with:
perl -i -npe 's,^// \+build.*\n,,' $(git grep -l -F '+build')
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Per chat. This is close enough to realtime but massively reduces
number of HTTP requests. (which you can verify with
TS_DEBUG_LOGTAIL_WAKES and watching tailscaled run at start)
By contrast, this is set to 2 minutes on mobile.
Change-Id: Id737c7924d452de5c446df3961f5e94a43a33f1f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The mobile implementation had a 2 minute ticker going all the time
to do a channel send. Instead, schedule it as needed based on activity.
Then we can be actually idle for long periods of time.
Updates #3363
Change-Id: I0dba4150ea7b94f74382fbd10db54a82f7ef6c29
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Upstream optimizations to the Go time package will make
unmarshaling of time.Time 3-6x faster. See:
* https://go.dev/cl/425116
* https://go.dev/cl/425197
* https://go.dev/cl/429862
The last optimization avoids a []byte -> string allocation
if the timestamp string less than than 32B.
Unfortunately, the presence of a timezone breaks that optimization.
Drop recording of timezone as this is non-essential information.
Most of the performance gains is upon unmarshal,
but there is also a slight performance benefit to
not marshaling the timezone as well.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The copy ID operates similar to a CC in email where
a message is sent to both the primary ID and also the copy ID.
A given log message is uploaded once, but the log server
records it twice for each ID.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
The io/ioutil package has been deprecated as of Go 1.16 [1]. This commit
replaces the existing io/ioutil functions with their new definitions in
io and os packages.
Reference: https://golang.org/doc/go1.16#ioutil
Signed-off-by: Eng Zer Jun <engzerjun@gmail.com>
Initialize logtail and provide an uploader that works in the
browser (we make a no-cors cross-origin request to avoid having to
open up the logcatcher servers to CORS).
Fixes#5147
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
Just reading the code again in prep for some alloc reductions.
Change-Id: I065226ea794b7ec7144c2b15942d35131c9313a8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
It is not idiomatic for Go code to panic for situations that
can be normal. For example, if a server receives PrivateID
from a client, it is normal for the server to call
PrivateID.PublicID to validate that the PublicID matches.
However, doing so would panic prior to this change.
Signed-off-by: Joe Tsai <joetsai@digital-static.net>
Saves some allocs. Not hot, but because we can now.
And a const instead of a var.
Change-Id: Ieb2b64534ed38051c36b2c0aa2e82739d9d0e015
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Allows instances that are running with the same machine ID (due to
cloning) to be distinguished.
Also adds sequence numbers to detect duplicates.
For tailscale/corp#5244
Signed-off-by: Mihai Parparita <mihai@tailscale.com>
For people running self-hosted control planes who want a global
opt-out knob instead of running their own logcatcher.
Change-Id: I7f996c09f45850ff77b58bfd5a535e197971725a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
e.g. the change to ipnlocal in this commit ultimately logs out:
{"logtail":{"client_time":"2022-02-17T20:40:30.511381153-08:00","server_time":"2022-02-18T04:40:31.057771504Z"},"type":"Hostinfo","val":{"GoArch":"amd64","Hostname":"tsdev","IPNVersion":"1.21.0-date.20220107","OS":"linux","OSVersion":"Debian 11.2 (bullseye); kernel=5.10.0-10-amd64"},"v":1}
Change-Id: I668646b19aeae4a2fed05170d7b279456829c844
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
For analysis of log spam.
Bandwidth is ~unchanged from had we not stripped the "[vN] " from
text; it just gets restructed intot he new "v":N, field. I guess it
adds one byte.
Updates #1548
Change-Id: Ie00a4e0d511066a33d10dc38d765d92b0b044697
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This started as an attempt to placate GitHub's code scanner,
but it's also probably generally a good idea.
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
This moves the Windows-only initialization of the filelogger into
logpolicy. Previously we only did it when babysitting the tailscaled
subprocess, but this meant that log messages from the service itself
never made it to disk. Examples that weren't logged to disk:
* logtail unable to dial out,
* DNS flush messages from the service
* svc.ChangeRequest messages (#3581)
This is basically the same fix as #3571 but staying in the Logf type,
and avoiding build-tagged file (which wasn't quite a goal, but
happened and seemed nice)
Fixes#3570
Co-authored-by: Aaron Klotz <aaron@tailscale.com>
Change-Id: Iacd80c4720b7218365ec80ae143339d030842702
Brad Fitzpatrick
Claire Wang
Joe Tsai
Mihai Parparita
Will Norris
Maisem Ali
David Crawshaw
Josh Soref
Eng Zer Jun
Josh Bleecher Snyder