In preparation for multi-user and unattended mode improvements, we are
refactoring and cleaning up `ipn/ipnlocal.profileManager`. The concept of the
"current user", which is only relevant on Windows, is being deprecated and will
soon be removed to allow more than one Windows user to connect and utilize
`LocalBackend` according to that user's access rights to the device and specific
Tailscale profiles.
We plan to pass the user's identity down to the `profileManager`, where it can
be used to determine the user's access rights to a given `LoginProfile`. While
the new permission model in `ipnauth` requires more work and is currently
blocked pending PR reviews, we are updating the `profileManager` to reduce its
reliance on the concept of a single OS user being connected to the backend at
the same time.
We extract the switching to the default Tailscale profile, which may also
trigger legacy profile migration, from `profileManager.SetCurrentUserID`. This
introduces `profileManager.DefaultUserProfileID`, which returns the default
profile ID for the current user, and `profileManager.SwitchToDefaultProfile`,
which is essentially a shorthand for `pm.SwitchProfile(pm.DefaultUserProfileID())`.
Both methods will eventually be updated to accept the user's identity and
utilize that user's default profile.
We make access checks more explicit by introducing the `profileManager.checkProfileAccess`
method. The current implementation continues to use `profileManager.currentUserID`
and `LoginProfile.LocalUserID` to determine whether access to a given profile
should be granted. This will be updated to utilize the `ipnauth` package and the
new permissions model once it's ready. We also expand access checks to be used
more widely in the `profileManager`, not just when switching or listing
profiles. This includes access checks in methods like `SetPrefs` and, most notably,
`DeleteProfile` and `DeleteAllProfiles`, preventing unprivileged Windows users
from deleting Tailscale profiles owned by other users on the same device,
including profiles owned by local admins.
We extract `profileManager.ProfilePrefs` and `profileManager.SetProfilePrefs`
methods that can be used to get and set preferences of a given `LoginProfile` if
`profileManager.checkProfileAccess` permits access to it.
We also update `profileManager.setUnattendedModeAsConfigured` to always enable
unattended mode on Windows if `Prefs.ForceDaemon` is true in the current
`LoginProfile`, even if `profileManager.currentUserID` is `""`. This facilitates
enabling unattended mode via `tailscale up --unattended` even if
`tailscale-ipn.exe` is not running, such as when a Group Policy or MDM-deployed
script runs at boot time, or when Tailscale is used on a Server Code or otherwise
headless Windows environments. See #12239, #2137, #3186 and
https://github.com/tailscale/tailscale/pull/6255#issuecomment-2016623838 for
details.
Fixes#12239
Updates tailscale/corp#18342
Updates #3186
Updates #2137
Signed-off-by: Nick Khyl <nickk@tailscale.com>
This adds support for sending packets to 33:33:00:00:01 at IPv6
multicast address ff02::1 to send to all nodes.
Nothing in Tailscale depends on this (yet?), but it makes debugging in
VMs behind natlab easier (e.g. you can ping all nodes), and other
things might depend on this in the future.
Mostly I'm trying to flesh out the IPv6 support in natlab now that we
can write vnet tests.
Updates #13038
Change-Id: If590031fcf075690ca35c7b230a38c3e72e621eb
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Currently, we use PermitRead/PermitWrite/PermitCert permission flags to determine which operations are allowed for a LocalAPI client.
These checks are performed when localapi.Handler handles a request. Additionally, certain operations (e.g., changing the serve config)
requires the connected user to be a local admin. This approach is inherently racey and is subject to TOCTOU issues.
We consider it to be more critical on Windows environments, which are inherently multi-user, and therefore we prevent more than one
OS user from connecting and utilizing the LocalBackend at the same time. However, the same type of issues is also applicable to other
platforms when switching between profiles that have different OperatorUser values in ipn.Prefs.
We'd like to allow more than one Windows user to connect, but limit what they can see and do based on their access rights on the device
(e.g., an local admin or not) and to the currently active LoginProfile (e.g., owner/operator or not), while preventing TOCTOU issues on Windows
and other platforms. Therefore, we'd like to pass an actor from the LocalAPI to the LocalBackend to represent the user performing the operation.
The LocalBackend, or the profileManager down the line, will then check the actor's access rights to perform a given operation on the device
and against the current (and/or the target) profile.
This PR does not change the current permission model in any way, but it introduces the concept of an actor and includes some preparatory
work to pass it around. Temporarily, the ipnauth.Actor interface has methods like IsLocalSystem and IsLocalAdmin, which are only relevant
to the current permission model. It also lacks methods that will actually be used in the new model. We'll be adding these gradually in the next
PRs and removing the deprecated methods and the Permit* flags at the end of the transition.
Updates tailscale/corp#18342
Signed-off-by: Nick Khyl <nickk@tailscale.com>
To test how virtual machines connect to the natlab vnet code.
Updates #13038
Change-Id: Ia4fd4b0c1803580ee7d94cc9878d777ad4f24f82
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
And refactor some of vnet.go for testability.
The only behavioral change (with a new test) is that ethernet
broadcasts no longer get sent back to the sender.
Updates #13038
Change-Id: Ic2e7e7d6d8805b7b7f2b5c52c2c5ba97101cef14
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This commit adds a new usermetric package and wires
up metrics across the tailscale client.
Updates tailscale/corp#22075
Co-authored-by: Anton Tolchanov <anton@tailscale.com>
Signed-off-by: Kristoffer Dalby <kristoffer@tailscale.com>
This was previously disabled in 8e42510 due to missing GSO-awareness in
tstun, which was resolved in d097096.
Updates tailscale/corp#22511
Signed-off-by: Jordan Whited <jordan@tailscale.com>
The bad naming (which had only been half updated with the IPv6
changes) tripped me up in the earlier change.
Updates #13038
Change-Id: I65ce07c167e8219d35b87e1f4bf61aab4cac31ff
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The reason they weren't working was because the cmd/tta agent in the
guest was dialing out to the test and the vnet couldn't map its global
unicast IPv6 address to a node as it was just using a
map[netip.Addr]*node and blindly trusting the *node was
populated. Instead, it was nil, so the agent connection fetching
didn't work for its RoundTripper and the test could never drive the
node. That map worked for IPv4 but for IPv6 we need to use the method
that takes into account the node's IPv6 SLAAC address. Most call sites
had been converted but I'd missed that one.
Also clean up some debug, and prohibit nodes' link-local unicast
addresses from dialing 2000::/3 directly for now. We can allow that to
be configured opt-in later (some sort of IPv6 NAT mode. Whatever it's
called.) That mode was working on accident, but was confusing: Linux
would do source address selection from link local for the first few
seconds and then after SLAAC and DAD, switch to using the global
unicast source address. Be consistent for now and force it to use the
global unicast.
Updates #13038
Change-Id: I85e973aaa38b43c14611943ff45c7c825ee9200a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Really we need to fix logpolicy + bootstrapDNS to not be so aggressive,
but this is a quick workaround meanwhile.
Without this, tailscaled starts immediately while IPv6 DAD is
happening for a couple seconds and logpolicy freaks out without the
network available and starts spamming stderr about bootstrap DNS
options. But we see that regularly anyway from people whose wifi is
down. So we need to fix the general case. This is not that fix.
Updates #13038
Change-Id: Iba7e536d08e59d34abded1d279f88fdc9c46d94d
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
There were a few places it could get wedged (notably the dial without
a timeout).
And add a knob for verbose debug logs.
And keep two idle connections always.
Updates #13038
Change-Id: I952ad182d7111481d97a83c12aa2ff4bfdc55fe8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Move all the UDP handling to its own func to remove a bunch of "if
isUDP" checks in a bunch of blocks.
Updates #13038
Change-Id: If71d71b49e57651d15bd307a2233c43751cc8639
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
I didn't actually see this, but added this while debugging something
and figured it'd be good to keep.
Updates #13038
Change-Id: I67934c8a329e0233f79c3b08516fd6bad6bfe22a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
On a major link change the LAN routes may change, so on linkChange where
ChangeDelta.Major, we need to call authReconfig to ensure that new
routes are observed and applied.
Updates tailscale/corp#22574
Signed-off-by: James Tucker <james@tailscale.com>
This is the equivalent of quad-100, but for IPv6. This is technically
already contained in the Tailscale IPv6 ULA prefix, but that is only
installed when remote peers are visible via control with contained
addrs. The service addr should always be reachable.
Updates #1152
Signed-off-by: Jordan Whited <jordan@tailscale.com>
And sprinkle some more docs around.
Updates #13038
Change-Id: Ia2dcf567b68170481cc2094d64b085c6b94a778a
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
We have several checked type assertions to *types.Named in both cmd/cloner and cmd/viewer.
As Go 1.23 updates the go/types package to produce Alias type nodes for type aliases,
these type assertions no longer work as expected unless the new behavior is disabled
with gotypesalias=0.
In this PR, we add codegen.NamedTypeOf(t types.Type), which functions like t.(*types.Named)
but also unrolls type aliases. We then use it in place of type assertions in the cmd/cloner and
cmd/viewer packages where appropriate.
We also update type switches to include *types.Alias alongside *types.Named in relevant cases,
remove *types.Struct cases when switching on types.Type.Underlying and update the tests
with more cases where type aliases can be used.
Updates #13224
Updates #12912
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Go 1.23 updates the go/types package to produce Alias type nodes for type aliases, unless disabled with gotypesalias=0.
This new default behavior breaks codegen.LookupMethod, which uses checked type assertions to types.Named and
types.Interface, as only named types and interfaces have methods.
In this PR, we update codegen.LookupMethod to perform method lookup on the right-hand side of the alias declaration
and clearly switch on the supported type nodes types. We also improve support for various edge cases, such as when an alias
is used as a type parameter constraint, and add tests for the LookupMethod function.
Additionally, we update cmd/viewer/tests to include types with aliases used in type fields and generic type constraints.
Updates #13224
Updates #12912
Signed-off-by: Nick Khyl <nickk@tailscale.com>
All the magic service names with virtual IPs will need IPv6 variants.
Pull this out in prep.
Updates #13038
Change-Id: I53b5eebd0679f9fa43dc0674805049258c83a0de
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
So we don't log about them when verbose logging is enabled.
Updates #13038
Change-Id: I925bc3a23e6c93d60dd4fb4bf6a4fdc5a326de95
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
The natlab Test Agent (tta) still had its old log streaming hack in
place where it dialed out to anything on TCP port 124 and those logs
were streamed to the host running the tests. But we'd since added gokrazy
syslog streaming support, which made that redundant.
So remove all the port 124 stuff. And then make sure we log to stderr
so gokrazy logs it to syslog.
Also, keep the first 1MB of logs in memory in tta too, exported via
localhost:8034/logs for interactive debugging. That was very useful
during debugging when I added IPv6 support. (which is coming in future
PRs)
Updates #13038
Change-Id: Ieed904a704410b9031d5fd5f014a73412348fa7f
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Otherwise you get "Access denied: watch IPN bus access denied, must
set ipn.NotifyNoPrivateKeys when not running as admin/root or
operator".
This lets a non-operator at least start the app and see the status, even
if they can't change everything. (the web UI is unaffected by operator)
A future change can add a LocalAPI call to check permissions and guide
people through adding a user as an operator (perhaps the web client
can do that?)
Updates #1708
Change-Id: I699e035a251b4ebe14385102d5e7a2993424c4b7
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
This adds a systray app for linux, similar to the apps for macOS and
windows. There are already a number of community-developed systray apps,
but most of them are either long abandoned, are built for a specific
desktop environment, or simply wrap the tailscale CLI.
This uses fyne.io/systray (a fork of github.com/getlantern/systray)
which uses newer D-Bus specifications to render the tray icon and menu.
This results in a pretty broad support for modern desktop environments.
This initial commit lacks a number of features like profile switching,
device listing, and exit node selection. This is really focused on the
application structure, the interaction with LocalAPI, and some system
integration pieces like the app icon, notifications, and the clipboard.
Updates #1708
Signed-off-by: Will Norris <will@tailscale.com>
updates tailcale/corp#22371
For dgram mode, we need to store the write addresses of
the client socket(s) alongside the writer functions and
the write operation needs to use WriteToUnix.
Unix also has multiple clients writing to the same socket,
so the serve method is modified to handle packets from
multiple mac addresses.
Cleans up a bit of cruft from the initial tailmac tooling
commit.
Now all the macOS packets are belong to us.
Signed-off-by: Jonathan Nobels <jonathan@tailscale.com>
After the upstream PR is merged, we can point directly at github.com/vishvananda/netlink
and retire github.com/tailscale/netlink.
See https://github.com/vishvananda/netlink/pull/1006
Updates #12298
Signed-off-by: Percy Wegmann <percy@tailscale.com>
And convert a few callers as an example, but nowhere near all.
Updates #12912
Change-Id: I5eaa12a29a6cd03b58d6f1072bd27bc0467852f2
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
In prep for updating to new staticcheck required for Go 1.23.
Updates #12912
Change-Id: If77892a023b79c6fa798f936fc80428fd4ce0673
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
To avoid dig vs nslookup vs $X availability issues between
OSes/distros. And to be in Go, to match the resolver we use.
Updates #13038
Change-Id: Ib7e5c351ed36b5470a42cbc230b8f27eed9a1bf8
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
net/tstun.Wrapper.InjectInboundPacketBuffer is not GSO-aware, which can
break quad-100 TCP streams as a result. Linux is the only platform where
gVisor GSO was previously enabled.
Updates tailscale/corp#22511
Updates #13211
Signed-off-by: Jordan Whited <jordan@tailscale.com>
Instead of changing the working directory before launching the incubator process,
this now just changes the working directory after dropping privileges, at which
point we're more likely to be able to enter the user's home directory since we're
running as the user.
For paths that use the 'login' or 'su -l' commands, those already take care of changing
the working directory to the user's home directory.
Fixes#13120
Signed-off-by: Percy Wegmann <percy@tailscale.com>
This adds a new package containing generic types to be used for defining preference hierarchies.
These include prefs.Item, prefs.List, prefs.StructList, and prefs.StructMap. Each of these types
represents a configurable preference, holding the preference's state, value, and metadata.
The metadata includes the default value (if it differs from the zero value of the Go type)
and flags indicating whether a preference is managed via syspolicy or is hidden/read-only for
another reason. This information can be marshaled and sent to the GUI, CLI and web clients
as a source of truth regarding preference configuration, management, and visibility/mutability states.
We plan to use these types to define device preferences, such as the updater preferences,
the permission mode to be used on Windows with #tailscale/corp#18342, and certain global options
that are currently exposed as tailscaled flags. We also aim to eventually use these types for
profile-local preferences in ipn.Prefs and and as a replacement for ipn.MaskedPrefs.
The generic preference types are compatible with the tailscale.com/cmd/viewer and
tailscale.com/cmd/cloner utilities.
Updates #12736
Signed-off-by: Nick Khyl <nickk@tailscale.com>
Nick Khyl
Brad Fitzpatrick
Jordan Whited
Kristoffer Dalby
Will Norris
James Tucker
Maisem Ali
Flakes Updater
Jonathan Nobels
Percy Wegmann
Ilarion Kovalchuk