Commit Graph

419 Commits

Author SHA1 Message Date
Brad Fitzpatrick acafe9811f wgengine/router: run netsh advfirewall less, rename, document setFirewall 2020-09-16 14:42:37 -07:00
Christina Wen 48fbe93e72
wgengine/magicsock: clarify pre-disco 'tailscale ping' error message
This change clarifies the error message when a user pings a peer that is using an outdated version of Tailscale.
2020-09-16 11:54:00 -04:00
Christina Wen e862f90e34
wgengine/router/router_linux.go: fixed " route del failed" error (#756)
* wgengine/router/router_linux.go: Switched `cidrDiff("addr")` and `cidrDiff("route")` order

Signed-off-by: Christina Wen <christina@tailscale.com>

Co-authored-by: Christina Wen <christina@tailscale.com>
2020-09-15 14:14:33 -04:00
Brad Fitzpatrick 7e9d1f7808 wgengine/router: tighten isMissingIPv6Err
So it doesn't false positive if misused.

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-09-15 08:21:56 -07:00
David Anderson 8f5b52e571 net/netns: add windows support.
Also remove rebinding logic from the windows router. Magicsock will
instead rebind based on link change signals.

Signed-off-by: David Anderson <danderson@tailscale.com>
2020-09-14 16:28:49 -07:00
Josh Bleecher Snyder a5d701095b wgengine/magicsock: increase test timeout to reduce flakiness
Updates #654. See that issue for a discussion of why
this timeout reduces flakiness, and what next steps are.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2020-09-14 14:29:28 -07:00
Josh Bleecher Snyder 0c0239242c wgengine/magicsock: make discoPingPurpose a stringer
It was useful for debugging once, it'll probably be useful again.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2020-09-14 14:29:28 -07:00
Josh Bleecher Snyder 6e38d29485 wgengine/magicsock: improve test logging output
This fixes line numbers and reduces timestamp
precision to overwhelming the output.

Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2020-09-14 14:29:28 -07:00
Brad Fitzpatrick a084c44afc wgengine, wgengine/router, cmd/tailscale: force netfilter mode off on Synology
For now. Get it working again so it's not stuck on 0.98.

Subnet relay can come later.

Updates #451

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-09-11 13:12:40 -07:00
Brad Fitzpatrick 31c13013ae wgengine/router: tolerate disabled IPv6 on Windows
Fixes #412
Updates #524 (maybe fixes?)

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-09-11 12:50:35 -07:00
Josh Bleecher Snyder 37b40b035b wgengine/router/dns: appease staticcheck (again) 2020-09-11 11:02:57 -07:00
Josh Bleecher Snyder a877dd575c wgengine/router/dns: remove unnecessary lint ignore line
Signed-off-by: Josh Bleecher Snyder <josh@tailscale.com>
2020-09-09 12:27:52 -07:00
Brad Fitzpatrick 913c1bd04f wgengine/router: on Windows, add a firewall rule to allow Tailscale
Updates tailscale/tailscale#454
2020-09-08 13:24:02 -07:00
Josh Bleecher Snyder 57e642648f wgengine/magicsock: fix typo in comment 2020-09-02 11:34:20 -07:00
Brad Fitzpatrick 6d14678009 wgengine/router: remove unnecessary newlines in log.Printf formats 2020-09-01 13:27:42 -07:00
Brad Fitzpatrick 09d56f54a7
wgengine/router: fix Windows route sorting that caused de-dup to not work (#727)
Updates #725

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-09-01 13:24:58 -07:00
Brad Fitzpatrick 9b07517f18 wgengine: add Engine.SetLinkChangeCallback
Start of making the IPN state machine react to link changes and down
its DNS & routes if necessary to unblock proxy resolution (e.g. for
transitioning from public to corp networks where the corp network has
mandatory proxies and WPAD PAC files that can't be resolved while
using the DNS/routes configured previously)

This change should be a no-op. Just some callback plumbing.
2020-08-27 21:25:17 -07:00
Dmytro Shynkevych cb5f3c0819
tsdns: log when settings upstreams.
It turns out that otherwise we don't know what exactly was set.

Also remove the now unused RootDomain config option.

Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-27 17:01:59 -04:00
Dmytro Shynkevych aa1da24f18
tsdns: remove now unused fields.
Missed in 7541982635.

Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-27 03:21:36 -04:00
Dmytro Shynkevych 7541982635
tsdns: remove forwarding queue.
Two levels of queueing are unnecessary.
The resulting implementation performs as follows
under request bursts (`count` packets sent concurrently):

lost  count            avg latency
   0 /  256 (00.00%) - 28ms
   0 /  512 (00.00%) - 146ms
   0 /  768 (00.00%) - 166ms
   0 / 1024 (00.00%) - 416ms
  11 / 1280 (00.86%) - 430ms
 145 / 1536 (09.44%) - 715ms
 364 / 2048 (17.77%) - 836ms

Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-27 03:18:17 -04:00
Dmytro Shynkevych 34a7e7c12b
tsdns: be more strict with type validation.
Previously, a type AAAA query would be answered with an A record
if only an IPv4 address was available. This is irrelevant for us
while we only use IPv4, but it will be a bug one day,
so it's worth being precise about semantics.

Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-27 00:45:30 -04:00
Dmytro Shynkevych bc34788e65
tsdns: fix accidental rejection of all non-{A, AAAA} questions.
This is a bug introduced in a903d6c2ed.

Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-27 00:42:56 -04:00
Brad Fitzpatrick 756d6a72bd wgengine: lazily create peer wireguard configs more explicitly
Rather than consider bigs jumps in last-received-from activity as a
signal to possibly reconfigure the set of wireguard peers to have
configured, instead just track the set of peers that are currently
excluded from the configuration. Easier to reason about.

Also adds a bit more logging.

This might fix an error we saw on a machine running a recent unstable
build:

2020-08-26 17:54:11.528033751 +0000 UTC: 8.6M/92.6M magicsock: [unexpected] lazy endpoint not created for [UcppE], d:42a770f678357249
2020-08-26 17:54:13.691305296 +0000 UTC: 8.7M/92.6M magicsock: DERP packet received from idle peer [UcppE]; created=false
2020-08-26 17:54:13.691383687 +0000 UTC: 8.7M/92.6M magicsock: DERP packet from unknown key: [UcppE]

If it does happen again, though, we'll have more logs.
2020-08-26 12:26:06 -07:00
halulu f27a57911b
cmd/tailscale: add derp and endpoints status (#703)
cmd/tailscale: add local node's information to status output (by default)

RELNOTE=yes

Updates #477

Signed-off-by: Halulu <lzjluzijie@gmail.com>
2020-08-25 16:26:10 -07:00
David Crawshaw dd2c61a519 magicsock: call RequestStatus when DERP connects
Second attempt.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2020-08-25 16:35:28 -04:00
David Crawshaw a67b174da1 Revert "magicsock: call RequestStatus when DERP connects"
Seems to break linux CI builder. Cannot reproduce locally,
so attempting a rollback.

This reverts commit cd7bc02ab1.

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2020-08-25 15:15:37 -04:00
David Crawshaw cd7bc02ab1 magicsock: call RequestStatus when DERP connects
Without this, a freshly started ipn client will be stuck in the
"Starting" state until something triggers a call to RequestStatus.
Usually a UI does this, but until then we can sit in this state
until poked by an external event, as is evidenced by our e2e tests
locking up when DERP is attached.

(This only recently became a problem when we enabled lazy handshaking
everywhere, otherwise the wireugard tunnel creation would also
trigger a RequestStatus.)

Signed-off-by: David Crawshaw <crawshaw@tailscale.com>
2020-08-25 10:38:02 -04:00
Brad Fitzpatrick 24d1a38e81 wgengine/monitor: add a poller to the Windows link change monitor
The poller is slow by default, but speeds up for a bit after a network
change, in case WPAD/PAC files are still loading.
2020-08-24 21:23:52 -07:00
Dmytro Shynkevych a903d6c2ed
tailcfg, tsdns: derive root domains from list of nodes (#708)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-24 17:27:21 -04:00
Disconnect3d 44598e3e89 wgengine/monitor_freebsd.go: remove duplicated errcheck
Signed-off-by: disconnect3d <dominik.b.czarnota@gmail.com>
2020-08-21 09:48:22 -07:00
Brad Fitzpatrick 7841c97af5 wgengine: make lazy wireguard on by default
It can still be explicitly enabled or disabled via the environment variable,
then via control.

But the default is to be lazy now.
2020-08-20 20:21:58 -07:00
Dmytro Shynkevych 6c71e5b851
tsdns: copy name when loewrcasing.
The previous approach modifies name in-place in the request slice to avoid an allocation.
This is incorrect: the question section of a DNS request
must be copied verbatim, without any such modification.
Software may rely on it (we rely on other resolvers doing it it in tsdns/forwarder).

Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-20 19:02:23 -04:00
Dmytro Shynkevych 1886dfdca3
tsdns: lowercase the name in parseQuery.
Domains in DNS should be case-insensitive.

Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-20 18:05:40 -04:00
Brad Fitzpatrick 9337a99dff tailcfg, wgengine, controlclient: add control-side gating of lazy WG config 2020-08-20 13:21:25 -07:00
chungdaniel 4d56d19b46
control/controlclient, wgengine/filter: extract parsePacketFilter to … (#696)
control/controlclient, wgengine/filter: extract parsePacketFilter to new constructor in wgengine/filter

Signed-off-by: chungdaniel <daniel@tailscale.com>
2020-08-20 10:36:19 -07:00
Brad Fitzpatrick 461db356b9 wgengine/router/dns: fix staticcheck error on Mac 2020-08-19 15:12:30 -07:00
Dmytro Shynkevych 1af70e2468
tsdns: delegate requests asynchronously (#687)
Signed-Off-By: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-19 15:39:25 -04:00
Dmytro Shynkevych a583e498b0
router/dns: set all domains on Windows (#672)
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-19 14:16:57 -04:00
Brad Fitzpatrick f6dc47efe4 tailcfg, controlclient, magicsock: add control feature flag to enable DRPO
Updates #150
2020-08-17 13:01:39 -07:00
Brad Fitzpatrick dbb4c246fa wgengine/monitor: add Windows linkchange monitor
Updates tailscale/corp#553

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-08-13 07:39:26 -07:00
Brad Fitzpatrick 85c3d17b3c wgengine/magicsock: use disco ping src as a candidate endpoint
Consider:

   Hard NAT (A) <---> Hard NAT w/ mapped port (B)

If A sends a packet to B's mapped port, A can disco ping B directly,
with low latency, without DERP.

But B couldn't establish a path back to A and needed to use DERP,
despite already logging about A's endpoint and adding a mapping to it
for other purposes (the wireguard conn.Endpoint lookup also needed
it).

This adds the tracking to discoEndpoint too so it'll be used for
finding a path back.

Fixes tailscale/corp#556

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-08-12 21:33:43 -07:00
Brad Fitzpatrick 0512fd89a1 wgengine/magicsock: simplify handlePingLocked
It's no longer true that 'de may be nil'
2020-08-12 19:25:38 -07:00
Brad Fitzpatrick b983e5340f wgengine/monitor: add, clean up netlink logging on route changes
Updates #643
2020-08-12 13:27:14 -07:00
Mike Kramlich 6fa7a9a055 wgengine/router/router_userspace_bsd: on Mac the route program syntax expects delete not del -- this had caused router reconfig to fail in some cases. Fixes #673
Signed-off-by: Mike Kramlich <groglogic@gmail.com>
2020-08-12 13:22:19 -07:00
Dmytro Shynkevych 95a18f815c
router/dns: detect host endianness for NetworkManager.
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-12 16:13:05 -04:00
Brad Fitzpatrick b97aac1718 net/interfaces: include DefaultRouteInterface in interfaces.State
And log it in wgengine on change. Changing bug in #643.

Updates #643
2020-08-12 12:48:34 -07:00
Brad Fitzpatrick 84dc891843 cmd/tailscale/cli: add ping subcommand
For example:

$ tailscale ping -h
USAGE
  ping <hostname-or-IP>

FLAGS
  -c 10                   max number of pings to send
  -stop-once-direct true  stop once a direct path is established
  -verbose false          verbose output

$ tailscale ping mon.ts.tailscale.com
pong from monitoring (100.88.178.64) via DERP(sfo) in 65ms
pong from monitoring (100.88.178.64) via DERP(sfo) in 252ms
pong from monitoring (100.88.178.64) via [2604:a880:2:d1::36:d001]:41641 in 33ms

Fixes #661

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-08-10 12:50:56 -07:00
Brad Fitzpatrick c64a43a734 wgengine/router: set MTU on Windows to min(configured,possible)
Fixes tailscale/corp#542

Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
2020-08-07 12:16:12 -07:00
Josh Bleecher Snyder 2622e8e082 wgenginer/router: fix build
Rebasing github.com/tailscale/wireguard-go to upstream
wireguard-go changed the API.

This commit is analogous to
https://git.zx2c4.com/wireguard-windows/commit/?id=6823cc10ffe193c0cb1d61a5d1828d563d3d0e5f
2020-08-06 17:37:05 -07:00
Dmytro Shynkevych cb01058a53
wgengine: stop giving tsdns a buffer that will be reused
Signed-off-by: Dmytro Shynkevych <dmytro@tailscale.com>
2020-08-06 18:11:50 -04:00