Previously we would use the Impersonate-Group header to pass through
tags to the k8s api server. However, we would do nothing for non-tagged
nodes. Now that we have a way to specify these via peerCaps respect those
and send down groups for non-tagged nodes as well.
For tagged nodes, it defaults to sending down the tags as groups to retain
legacy behavior if there are no caps set. Otherwise, the tags are omitted.
Updates #5055
Signed-off-by: Maisem Ali <maisem@tailscale.com>
If a node is flapping or otherwise generating lots of STUN endpoints, we
can end up caching a ton of useless values and sending them to peers.
Instead, let's apply a fixed per-Addr limit of endpoints that we cache,
so that we're only sending peers up to the N most recent.
Updates tailscale/corp#13890
Signed-off-by: Andrew Dunham <andrew@du.nham.ca>
Change-Id: I8079a05b44220c46da55016c0e5fc96dd2135ef8
When trying to use serve with https, send users through https cert
provisioning enablement before editing the ServeConfig.
Updates tailscale/corp#10577
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
1. Add metrics to funnel flow.
2. Stop blocking users from turning off funnels when no longer in
their node capabilities.
3. Rename LocalClient.IncrementMetric to IncrementCounter to better
callout its usage is only for counter clientmetrics.
Updates tailscale/corp#10577
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
This removes the unsafe/linkname and only uses the standard library.
It's a bit slower, for now, but https://go.dev/cl/518336 should get us
back.
On darwin/arm64, without https://go.dev/cl/518336
pkg: tailscale.com/tstime/mono
│ before │ after │
│ sec/op │ sec/op vs base │
MonoNow-8 16.20n ± 0% 19.75n ± 0% +21.92% (p=0.000 n=10)
TimeNow-8 39.46n ± 0% 39.40n ± 0% -0.16% (p=0.002 n=10)
geomean 25.28n 27.89n +10.33%
And with it,
MonoNow-8 16.34n ± 1% 16.93n ± 0% +3.67% (p=0.001 n=10)
TimeNow-8 39.55n ± 15% 38.46n ± 1% -2.76% (p=0.000 n=10)
geomean 25.42n 25.52n +0.41%
Updates #8839
Updates tailscale/go#70
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Netcheck no longer performs I/O itself, instead it makes requests via
SendPacket and expects users to route reply traffic to
ReceiveSTUNPacket.
Netcheck gains a Standalone function that stands up sockets and
goroutines to implement I/O when used in a standalone fashion.
Magicsock now unconditionally routes STUN traffic to the netcheck.Client
that it hosts, and plumbs the send packet sink.
The CLI is updated to make use of the Standalone mode.
Fixes#8723
Signed-off-by: James Tucker <james@tailscale.com>
Currently just serving a "Hello world" page when running the web
cli in --dev mode.
Updates tailscale/corp#13775
Co-authored-by: Will Norris <will@tailscale.com>
Signed-off-by: Sonia Appasamy <sonia@tailscale.com>
Extract the self-update logic from cmd/tailscale/cli into a standalone
package that could be used from tailscaled later.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
move the tailscale web client out of the cmd/tailscale/cli package, into
a new client/web package. The remaining cli/web.go file is still
responsible for parsing CLI flags and such, and then calls into
client/web. This will allow the web client to be hooked into from other
contexts (for example, from a tsnet server), and provide a dedicated
space to add more functionality to this client.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
Refactor two shared functions used by the tailscale cli,
calcAdvertiseRoutes and licensesURL. These are used by the web client as
well as other tailscale subcommands. The web client is being moved out
of the cli package, so move these two functions to new locations.
Updates tailscale/corp#13775
Signed-off-by: Will Norris <will@tailscale.com>
This adds the capability to pad disco ping message payloads to reach a
specified size. It also plumbs it through to the tailscale ping -size
flag.
Disco pings used for actual endpoint discovery do not use this yet.
Updates #311.
Signed-off-by: salman <salman@tailscale.com>
Co-authored-by: Val <valerie@tailscale.com>
Plumb a signing callback function to `unixpkgs.rpmTarget` to allow
signing RPMs. This callback is optional and RPMs will build unsigned if
not set, just as before.
Updates https://github.com/tailscale/tailscale/issues/1882
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Upgrade the nfpm package to the latest version to pick up
24a43c5ad7.
The upgrade is from v0 to v2, so there was some breakage to fix.
Generated packages should have the same contents as before.
Updates https://github.com/tailscale/tailscale/issues/1882
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* We update wingoes to pick up new version information functionality
(See pe/version.go in the https://github.com/dblohm7/wingoes repo);
* We move the existing LogSupportInfo code (including necessary syscall
stubs) out of util/winutil into a new package, util/osdiag, and implement
the public LogSupportInfo function may be implemented for other platforms
as needed;
* We add a new reason argument to LogSupportInfo and wire that into
localapi's bugreport implementation;
* We add module information to the Windows implementation of LogSupportInfo
when reason indicates a bugreport. We enumerate all loaded modules in our
process, and for each one we gather debug, authenticode signature, and
version information.
Fixes#7802
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Add optional `--upstream` flag to `tailscale version` to fetch the
latest upstream release version from `pkgs.tailscale.com`. This is
useful to diagnose `tailscale update` behavior or write other tooling.
Example output:
$ tailscale version --upstream --json
{
"majorMinorPatch": "1.47.35",
"short": "1.47.35",
"long": "1.47.35-t6afffece8",
"unstableBranch": true,
"gitCommit": "6afffece8a32509aa7a4dc2972415ec58d8316de",
"cap": 66,
"upstream": "1.45.61"
}
Fixes#8669
RELNOTE=adds "tailscale version --upstream"
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The revoke-keys command allows nodes with tailnet lock keys
to collaborate to erase the use of a compromised key, and remove trust
in it.
Signed-off-by: Tom DNetto <tom@tailscale.com>
Updates ENG-1848
Previously, tailscale upgrade was doing the bare minimum for checking
authenticode signatures via `WinVerifyTrustEx`. This is fine, but we can do
better:
* WinVerifyTrustEx verifies that the binary's signature is valid, but it doesn't
determine *whose* signature is valid; tailscale upgrade should also ensure that
the binary is actually signed *by us*.
* I added the ability to check the signatures of MSI files.
* In future PRs I will be adding diagnostic logging that lists details about
every module (ie, DLL) loaded into our process. As part of that metadata, I
want to be able to extract information about who signed the binaries.
This code is modelled on some C++ I wrote for Firefox back in the day. See
https://searchfox.org/mozilla-central/rev/27e4816536c891d85d63695025f2549fd7976392/toolkit/xre/dllservices/mozglue/Authenticode.cpp
for reference.
Fixes#8284
Signed-off-by: Aaron Klotz <aaron@tailscale.com>
Count number of sessions, number of DNS queries answered
successfully and in error, and number of http->https redirects.
Updates #1748
Signed-off-by: Denton Gentry <dgentry@tailscale.com>
Pass an optional PEM-encoded ECDSA key to `cmd/dist` to sign all built
tarballs. The signature is stored next to the tarball with a `.sig`
extension.
Tested this with an `openssl`-generated key pair and verified the
resulting signature.
Updates #8760
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This change introduces a new subcommand, `exit-node`, along with a
subsubcommand of `list` and a `--filter` flag.
Exit nodes without location data will continue to be displayed when
`status` is used. Exit nodes with location data will only be displayed
behind `exit-node list`, and in status if they are the active exit node.
The `filter` flag can be used to filter exit nodes with location data by
country.
Exit nodes with Location.Priority data will have only the highest
priority option for each country and city listed. For countries with
multiple cities, a <Country> <Any> option will be displayed, indicating
the highest priority node within that country.
Updates tailscale/corp#13025
Signed-off-by: Charlotte Brandhorst-Satzkorn <charlotte@tailscale.com>
Implement `tailscale update` on FreeBSD. This is much simpler than other
platforms because `pkg rquery` lets us get the version in their repos
without any extra parsing.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
Define PeerCapabilty and PeerCapMap as the new way of sending down
inter-peer capability information.
Previously, this was unstructured and you could only send down strings
which got too limiting for certain usecases. Instead add the ability
to send down raw JSON messages that are opaque to Tailscale but provide
the applications to define them however they wish.
Also update accessors to use the new values.
Updates #4217
Signed-off-by: Maisem Ali <maisem@tailscale.com>
Similar to Arch support, use the latest version info from the official
`apk` repo and don't offer explicit track or version switching.
Add detection for Alpine Linux in version/distro along the way.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
This is the Fedora family of distros, including CentOS, RHEL and others.
Tested in `fedora:latest` and `centos:7` containers.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
The util/linuxfw/iptables.go had a bunch of code that wasn't yet used
(in prep for future work) but because of its imports, ended up
initializing code deep within gvisor that panicked on init on arm64
systems not using 4KB pages.
This deletes the unused code to delete the imports and remove the
panic. We can then cherry-pick this back to the branch and restore it
later in a different way.
A new test makes sure we don't regress in the future by depending on
the panicking package in question.
Fixes#8658
Signed-off-by: Brad Fitzpatrick <bradfitz@tailscale.com>
Arch version of tailscale is not maintained by us, but is generally
up-to-date with our releases. Therefore "tailscale update" is just a
thin wrapper around "pacman -Sy tailscale" with different flags.
Updates #6995
Signed-off-by: Andrew Lytvynov <awly@tailscale.com>
* cmd/tailscale/cli: make `tailscale update` query `softwareupdate`
Even on macOS when Tailscale was installed via the App Store, we can check for
and even install new versions if people ask explicitly. Also, warn if App Store
AutoUpdate is not turned on.
Updates #6995
This changes the ACLTestError type to reuse the existing/identical
types from the ACL implementation, to avoid issues in the future if
the two types fall out of sync.
Updates #8645
Signed-off-by: Jenny Zhang <jz@tailscale.com>
When using a custom http port like 8080, this was resulting in a
constructed hostname of `host.tailnet.ts.net:8080.tailnet.ts.net` when
looking up the serve handler. Instead, strip off the port before adding
the MagicDNS suffix.
Also use the actual hostname in `serve status` rather than the literal
string "host".
Fixes#8635
Signed-off-by: Will Norris <will@tailscale.com>
Denton Gentry
Brad Fitzpatrick
Maisem Ali
Sonia Appasamy
Charlotte Brandhorst-Satzkorn
Andrew Dunham
James Tucker
Andrew Lytvynov
Will Norris
salman aljammaz
Claire Wang
Aaron Klotz
Tom DNetto
David Anderson
Chris Palmer
Jenny Zhang