AdGuardHome/CHANGELOG.md

1267 lines
50 KiB
Markdown

# AdGuard Home Changelog
All notable changes to this project will be documented in this file.
The format is based on
[*Keep a Changelog*](https://keepachangelog.com/en/1.0.0/),
and this project adheres to
[Semantic Versioning](https://semver.org/spec/v2.0.0.html).
## [Unreleased]
<!--
## [v0.108.0] - 2022-12-01 (APPROX.)
-->
### Security
- Weaker cipher suites that use the CBC (cipher block chaining) mode of
operation have been disabled ([#2993]).
### Added
- Support for plain (unencrypted) HTTP/2 ([#4930]). This is useful for AdGuard
Home installations behind a reverse proxy.
[#2993]: https://github.com/AdguardTeam/AdGuardHome/issues/2993
[#4930]: https://github.com/AdguardTeam/AdGuardHome/issues/4930
<!--
## [v0.107.14] - 2022-10-05 (APPROX.)
See also the [v0.107.14 GitHub milestone][ms-v0.107.14].
[ms-v0.107.14]: https://github.com/AdguardTeam/AdGuardHome/milestone/50?closed=1
-->
## [v0.107.13] - 2022-09-14
See also the [v0.107.13 GitHub milestone][ms-v0.107.13].
### Added
- The new optional `dns.ipset_file` property, which can be set in the
configuration file. It allows loading the `ipset` list from a file, just like
`dns.upstream_dns_file` does for upstream servers ([#4686]).
### Changed
- The minimum DHCP message size is reassigned back to BOOTP's constraint of 300
bytes ([#4904]).
### Fixed
- Panic when adding a static lease within the disabled DHCP server ([#4722]).
[#4686]: https://github.com/AdguardTeam/AdGuardHome/issues/4686
[#4722]: https://github.com/AdguardTeam/AdGuardHome/issues/4722
[#4904]: https://github.com/AdguardTeam/AdGuardHome/issues/4904
[ms-v0.107.13]: https://github.com/AdguardTeam/AdGuardHome/milestone/49?closed=1
## [v0.107.12] - 2022-09-07
See also the [v0.107.12 GitHub milestone][ms-v0.107.12].
### Security
- Go version was updated to prevent the possibility of exploiting the
CVE-2022-27664 and CVE-2022-32190 Go vulnerabilities fixed in
[Go 1.18.6][go-1.18.6].
### Added
- New `bool`, `dur`, `u8`, and `u16` DHCP options to provide more convenience on
options control by setting values in a human-readable format ([#4705]). See
also a [Wiki page][wiki-dhcp-opts].
- New `del` DHCP option which removes the corresponding option from server's
response ([#4337]). See also a [Wiki page][wiki-dhcp-opts].
**NOTE:** This modifier affects all the parameters in the response and not
only the requested ones.
- A new HTTP API, `GET /control/blocked_services/services`, that lists all
available blocked services ([#4535]).
### Changed
- The DHCP options handling is now closer to the [RFC 2131][rfc-2131] ([#4705]).
- When the DHCP server is enabled, queries for domain names under
`dhcp.local_domain_name` not pointing to real DHCP client hostnames are now
processed by filters ([#4865]).
- The `DHCPREQUEST` handling is now closer to the [RFC 2131][rfc-2131]
([#4863]).
- The internal DNS client, used to resolve hostnames of external clients and
also during automatic updates, now respects the upstream mode settings for the
main DNS client ([#4403]).
### Deprecated
- Ports 784 and 8853 for DNS-over-QUIC in Docker images. Users who still serve
DoQ on these ports are encouraged to move to the standard port 853. These
ports will be removed from the `EXPOSE` section of our `Dockerfile` in a
future release.
- Go 1.18 support. Future versions will require at least Go 1.19 to build.
### Fixed
- The length of the DHCP server's response is now at least 576 bytes as per
[RFC 2131][rfc-2131] recommendation ([#4337]).
- Dynamic leases created with empty hostnames ([#4745]).
- Unnecessary logging of non-critical statistics errors ([#4850]).
[#4337]: https://github.com/AdguardTeam/AdGuardHome/issues/4337
[#4403]: https://github.com/AdguardTeam/AdGuardHome/issues/4403
[#4535]: https://github.com/AdguardTeam/AdGuardHome/issues/4535
[#4705]: https://github.com/AdguardTeam/AdGuardHome/issues/4705
[#4745]: https://github.com/AdguardTeam/AdGuardHome/issues/4745
[#4850]: https://github.com/AdguardTeam/AdGuardHome/issues/4850
[#4863]: https://github.com/AdguardTeam/AdGuardHome/issues/4863
[#4865]: https://github.com/AdguardTeam/AdGuardHome/issues/4865
[go-1.18.6]: https://groups.google.com/g/golang-announce/c/x49AQzIVX-s
[ms-v0.107.12]: https://github.com/AdguardTeam/AdGuardHome/milestone/48?closed=1
[rfc-2131]: https://datatracker.ietf.org/doc/html/rfc2131
[wiki-dhcp-opts]: https://github.com/adguardTeam/adGuardHome/wiki/DHCP#config-4
## [v0.107.11] - 2022-08-19
See also the [v0.107.11 GitHub milestone][ms-v0.107.11].
### Added
- Bilibili service blocking ([#4795]).
### Changed
- DNS-over-QUIC connections now use keepalive.
### Fixed
- Migrations from releases older than v0.107.7 failing ([#4846]).
[#4795]: https://github.com/AdguardTeam/AdGuardHome/issues/4795
[#4846]: https://github.com/AdguardTeam/AdGuardHome/issues/4846
[ms-v0.107.11]: https://github.com/AdguardTeam/AdGuardHome/milestone/47?closed=1
## [v0.107.10] - 2022-08-17
See also the [v0.107.10 GitHub milestone][ms-v0.107.10].
### Added
- Arabic localization.
- Support for Discovery of Designated Resolvers (DDR) according to the [RFC
draft][ddr-draft] ([#4463]).
### Changed
- Our snap package now uses the `core22` image as its base ([#4843]).
### Fixed
- DHCP not working on most OSes ([#4836]).
- `invalid argument` errors during update checks on older Linux kernels
([#4670]).
- Data races and concurrent map access in statistics module ([#4358], [#4342]).
[#4342]: https://github.com/AdguardTeam/AdGuardHome/issues/4342
[#4358]: https://github.com/AdguardTeam/AdGuardHome/issues/4358
[#4670]: https://github.com/AdguardTeam/AdGuardHome/issues/4670
[#4836]: https://github.com/AdguardTeam/AdGuardHome/issues/4836
[#4843]: https://github.com/AdguardTeam/AdGuardHome/issues/4843
[ddr-draft]: https://datatracker.ietf.org/doc/html/draft-ietf-add-ddr-08
[ms-v0.107.10]: https://github.com/AdguardTeam/AdGuardHome/milestone/46?closed=1
## [v0.107.9] - 2022-08-03
See also the [v0.107.9 GitHub milestone][ms-v0.107.9].
### Security
- Go version was updated to prevent the possibility of exploiting the
CVE-2022-32189 Go vulnerability fixed in [Go 1.18.5][go-1.18.5]. Go 1.17
support has also been removed, as it has reached end of life and will not
receive security updates.
### Added
- Domain-specific upstream servers test. If such test fails, a warning message
is shown ([#4517]).
- `windows/arm64` support ([#3057]).
### Changed
- UI and update links have been changed to make them more resistant to DNS
blocking.
### Fixed
- DHCP not working on most OSes ([#4836]).
- Several UI issues ([#4775], [#4776], [#4782]).
### Removed
- Go 1.17 support, as it has reached end of life.
[#3057]: https://github.com/AdguardTeam/AdGuardHome/issues/3057
[#4517]: https://github.com/AdguardTeam/AdGuardHome/issues/4517
[#4775]: https://github.com/AdguardTeam/AdGuardHome/issues/4775
[#4776]: https://github.com/AdguardTeam/AdGuardHome/issues/4776
[#4782]: https://github.com/AdguardTeam/AdGuardHome/issues/4782
[#4836]: https://github.com/AdguardTeam/AdGuardHome/issues/4836
[go-1.18.5]: https://groups.google.com/g/golang-announce/c/YqYYG87xB10
[ms-v0.107.9]: https://github.com/AdguardTeam/AdGuardHome/milestone/45?closed=1
## [v0.107.8] - 2022-07-13
See also the [v0.107.8 GitHub milestone][ms-v0.107.8].
### Security
- Go version was updated to prevent the possibility of exploiting the
CVE-2022-1705, CVE-2022-32148, CVE-2022-30631, and other Go vulnerabilities
fixed in [Go 1.17.12][go-1.17.12].
<!--
TODO(a.garipov): Use the above format in all similar announcements below.
-->
### Fixed
- DHCP lease validation incorrectly letting users assign the IP address of the
gateway as the address of the lease ([#4698]).
- Updater no longer expects a hardcoded name for `AdGuardHome` executable
([#4219]).
- Inconsistent names of runtime clients from hosts files ([#4683]).
- PTR requests for addresses leased by DHCP will now be resolved into hostnames
under `dhcp.local_domain_name` ([#4699]).
- Broken service installation on OpenWrt ([#4677]).
[#4219]: https://github.com/AdguardTeam/AdGuardHome/issues/4219
[#4677]: https://github.com/AdguardTeam/AdGuardHome/issues/4677
[#4683]: https://github.com/AdguardTeam/AdGuardHome/issues/4683
[#4698]: https://github.com/AdguardTeam/AdGuardHome/issues/4698
[#4699]: https://github.com/AdguardTeam/AdGuardHome/issues/4699
[go-1.17.12]: https://groups.google.com/g/golang-announce/c/nqrv9fbR0zE
[ms-v0.107.8]: https://github.com/AdguardTeam/AdGuardHome/milestone/44?closed=1
## [v0.107.7] - 2022-06-06
See also the [v0.107.7 GitHub milestone][ms-v0.107.7].
### Security
- Go version was updated to prevent the possibility of exploiting the
[CVE-2022-29526], [CVE-2022-30634], [CVE-2022-30629], [CVE-2022-30580], and
[CVE-2022-29804] Go vulnerabilities.
- Enforced password strength policy ([#3503]).
### Added
- Support for the final DNS-over-QUIC standard, [RFC 9250][rfc-9250] ([#4592]).
- Support upstreams for subdomains of a domain only ([#4503]).
- The ability to control each source of runtime clients separately via
`clients.runtime_sources` configuration object ([#3020]).
- The ability to customize the set of networks that are considered private
through the new `dns.private_networks` property in the configuration file
([#3142]).
- EDNS Client-Subnet information in the request details section of a query log
record ([#3978]).
- Support for hostnames for plain UDP upstream servers using the `udp://` scheme
([#4166]).
- Logs are now collected by default on FreeBSD and OpenBSD when AdGuard Home is
installed as a service ([#4213]).
### Changed
- On OpenBSD, the daemon script now uses the recommended `/bin/ksh` shell
instead of the `/bin/sh` one ([#4533]). To apply this change, backup your
data and run `AdGuardHome -s uninstall && AdGuardHome -s install`.
- The default DNS-over-QUIC port number is now `853` instead of `754` in
accordance with [RFC 9250][rfc-9250] ([#4276]).
- Reverse DNS now has a greater priority as the source of runtime clients'
information than ARP neighborhood.
- Improved detection of runtime clients through more resilient ARP processing
([#3597]).
- The TTL of responses served from the optimistic cache is now lowered to 10
seconds.
- Domain-specific private reverse DNS upstream servers are now validated to
allow only `*.in-addr.arpa` and `*.ip6.arpa` domains pointing to
locally-served networks ([#3381]).
**NOTE:** If you already have invalid entries in your configuration, consider
removing them manually, since they essentially had no effect.
- Response filtering is now performed using the record types of the answer
section of messages as opposed to the type of the question ([#4238]).
- Instead of adding the build time information, the build scripts now use the
standardized environment variable [`SOURCE_DATE_EPOCH`][repr] to add the date
of the commit from which the binary was built ([#4221]). This should simplify
reproducible builds for package maintainers and those who compile their own
AdGuard Home.
- The property `local_domain_name` is now in the `dhcp` object in the
configuration file to avoid confusion ([#3367]).
- The `dns.bogus_nxdomain` property in the configuration file now supports CIDR
notation alongside IP addresses ([#1730]).
#### Configuration Changes
In this release, the schema version has changed from 12 to 14.
- Object `clients`, which in schema versions 13 and earlier was an array of
actual persistent clients, is now consist of `persistent` and
`runtime_sources` properties:
```yaml
# BEFORE:
'clients':
- name: client-name
# …
# AFTER:
'clients':
'persistent':
- name: client-name
# …
'runtime_sources':
whois: true
arp: true
rdns: true
dhcp: true
hosts: true
```
The value for `clients.runtime_sources.rdns` field is taken from
`dns.resolve_clients` property. To rollback this change, remove the
`runtime_sources` property, move the contents of `persistent` into the
`clients` itself, the value of `clients.runtime_sources.rdns` into the
`dns.resolve_clients`, and change the `schema_version` back to `13`.
- Property `local_domain_name`, which in schema versions 12 and earlier used to
be a part of the `dns` object, is now a part of the `dhcp` object:
```yaml
# BEFORE:
'dns':
# …
'local_domain_name': 'lan'
# AFTER:
'dhcp':
# …
'local_domain_name': 'lan'
```
To rollback this change, move the property back into the `dns` object and
change the `schema_version` back to `12`.
### Deprecated
- The `--no-etc-hosts` option. Its functionality is now controlled by
`clients.runtime_sources.hosts` configuration property. v0.109.0 will remove
the flag completely.
### Fixed
- Query log occasionally going into an infinite loop ([#4591]).
- Service startup on boot on systems using SysV-init ([#4480]).
- Detection of the stopped service status on macOS and Linux ([#4273]).
- Case-sensitive ClientID ([#4542]).
- Slow version update queries making other HTTP APIs unresponsive ([#4499]).
- ARP tables refreshing process causing excessive PTR requests ([#3157]).
[#1730]: https://github.com/AdguardTeam/AdGuardHome/issues/1730
[#3020]: https://github.com/AdguardTeam/AdGuardHome/issues/3020
[#3142]: https://github.com/AdguardTeam/AdGuardHome/issues/3142
[#3157]: https://github.com/AdguardTeam/AdGuardHome/issues/3157
[#3367]: https://github.com/AdguardTeam/AdGuardHome/issues/3367
[#3381]: https://github.com/AdguardTeam/AdGuardHome/issues/3381
[#3503]: https://github.com/AdguardTeam/AdGuardHome/issues/3503
[#3597]: https://github.com/AdguardTeam/AdGuardHome/issues/3597
[#3978]: https://github.com/AdguardTeam/AdGuardHome/issues/3978
[#4166]: https://github.com/AdguardTeam/AdGuardHome/issues/4166
[#4213]: https://github.com/AdguardTeam/AdGuardHome/issues/4213
[#4221]: https://github.com/AdguardTeam/AdGuardHome/issues/4221
[#4238]: https://github.com/AdguardTeam/AdGuardHome/issues/4238
[#4273]: https://github.com/AdguardTeam/AdGuardHome/issues/4273
[#4276]: https://github.com/AdguardTeam/AdGuardHome/issues/4276
[#4480]: https://github.com/AdguardTeam/AdGuardHome/issues/4480
[#4499]: https://github.com/AdguardTeam/AdGuardHome/issues/4499
[#4503]: https://github.com/AdguardTeam/AdGuardHome/issues/4503
[#4533]: https://github.com/AdguardTeam/AdGuardHome/issues/4533
[#4542]: https://github.com/AdguardTeam/AdGuardHome/issues/4542
[#4591]: https://github.com/AdguardTeam/AdGuardHome/issues/4591
[#4592]: https://github.com/AdguardTeam/AdGuardHome/issues/4592
[CVE-2022-29526]: https://www.cvedetails.com/cve/CVE-2022-29526
[CVE-2022-29804]: https://www.cvedetails.com/cve/CVE-2022-29804
[CVE-2022-30580]: https://www.cvedetails.com/cve/CVE-2022-30580
[CVE-2022-30629]: https://www.cvedetails.com/cve/CVE-2022-30629
[CVE-2022-30634]: https://www.cvedetails.com/cve/CVE-2022-30634
[ms-v0.107.7]: https://github.com/AdguardTeam/AdGuardHome/milestone/43?closed=1
[rfc-9250]: https://datatracker.ietf.org/doc/html/rfc9250
## [v0.107.6] - 2022-04-13
See also the [v0.107.6 GitHub milestone][ms-v0.107.6].
### Security
- `User-Agent` HTTP header removed from outgoing DNS-over-HTTPS requests.
- Go version was updated to prevent the possibility of exploiting the
[CVE-2022-24675], [CVE-2022-27536], and [CVE-2022-28327] Go vulnerabilities.
### Added
- Support for SVCB/HTTPS parameter `dohpath` in filtering rules with
the `dnsrewrite` modifier according to the [RFC draft][dns-draft-02]
([#4463]).
### Changed
- Filtering rules with the `dnsrewrite` modifier that create SVCB or HTTPS
responses should use `ech` instead of `echconfig` to conform with the [latest
drafts][svcb-draft-08].
### Deprecated
- SVCB/HTTPS parameter name `echconfig` in filtering rules with the `dnsrewrite`
modifier. Use `ech` instead. v0.109.0 will remove support for the outdated
name `echconfig`.
- Obsolete `--no-mem-optimization` option ([#4437]). v0.109.0 will remove the
flag completely.
### Fixed
- I/O timeout errors when checking for the presence of another DHCP server.
- Network interfaces being incorrectly labeled as down during installation.
- Rules for blocking the QQ service ([#3717]).
### Removed
- Go 1.16 support, since that branch of the Go compiler has reached end of life
and doesn't receive security updates anymore.
[#3717]: https://github.com/AdguardTeam/AdGuardHome/issues/3717
[#4437]: https://github.com/AdguardTeam/AdGuardHome/issues/4437
[#4463]: https://github.com/AdguardTeam/AdGuardHome/issues/4463
[CVE-2022-24675]: https://www.cvedetails.com/cve/CVE-2022-24675
[CVE-2022-27536]: https://www.cvedetails.com/cve/CVE-2022-27536
[CVE-2022-28327]: https://www.cvedetails.com/cve/CVE-2022-28327
[dns-draft-02]: https://datatracker.ietf.org/doc/html/draft-ietf-add-svcb-dns-02#section-5.1
[ms-v0.107.6]: https://github.com/AdguardTeam/AdGuardHome/milestone/42?closed=1
[repr]: https://reproducible-builds.org/docs/source-date-epoch/
[svcb-draft-08]: https://www.ietf.org/archive/id/draft-ietf-dnsop-svcb-https-08.html
## [v0.107.5] - 2022-03-04
This is a security update. There is no GitHub milestone, since no GitHub issues
were resolved.
### Security
- Go version was updated to prevent the possibility of exploiting the
[CVE-2022-24921] Go vulnerability.
[CVE-2022-24921]: https://www.cvedetails.com/cve/CVE-2022-24921
## [v0.107.4] - 2022-03-01
See also the [v0.107.4 GitHub milestone][ms-v0.107.4].
### Security
- Go version was updated to prevent the possibility of exploiting the
[CVE-2022-23806], [CVE-2022-23772], and [CVE-2022-23773] Go vulnerabilities.
### Fixed
- Optimistic cache now responds with expired items even if those can't be
resolved again ([#4254]).
- Unnecessarily complex hosts-related logic leading to infinite recursion in
some cases ([#4216]).
[#4216]: https://github.com/AdguardTeam/AdGuardHome/issues/4216
[#4254]: https://github.com/AdguardTeam/AdGuardHome/issues/4254
[CVE-2022-23772]: https://www.cvedetails.com/cve/CVE-2022-23772
[CVE-2022-23773]: https://www.cvedetails.com/cve/CVE-2022-23773
[CVE-2022-23806]: https://www.cvedetails.com/cve/CVE-2022-23806
[ms-v0.107.4]: https://github.com/AdguardTeam/AdGuardHome/milestone/41?closed=1
## [v0.107.3] - 2022-01-25
See also the [v0.107.3 GitHub milestone][ms-v0.107.3].
### Added
- Support for a `dnsrewrite` modifier with an empty `NOERROR` response
([#4133]).
### Fixed
- Wrong set of ports checked for duplicates during the initial setup ([#4095]).
- Incorrectly invalidated service domains ([#4120]).
- Poor testing of domain-specific upstream servers ([#4074]).
- Omitted aliases of hosts specified by another line within the OS's hosts file
([#4079]).
[#4074]: https://github.com/AdguardTeam/AdGuardHome/issues/4074
[#4079]: https://github.com/AdguardTeam/AdGuardHome/issues/4079
[#4095]: https://github.com/AdguardTeam/AdGuardHome/issues/4095
[#4120]: https://github.com/AdguardTeam/AdGuardHome/issues/4120
[#4133]: https://github.com/AdguardTeam/AdGuardHome/issues/4133
[ms-v0.107.3]: https://github.com/AdguardTeam/AdGuardHome/milestone/40?closed=1
## [v0.107.2] - 2021-12-29
See also the [v0.107.2 GitHub milestone][ms-v0.107.2].
### Fixed
- Infinite loops when TCP connections time out ([#4042]).
[#4042]: https://github.com/AdguardTeam/AdGuardHome/issues/4042
[ms-v0.107.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/38?closed=1
## [v0.107.1] - 2021-12-29
See also the [v0.107.1 GitHub milestone][ms-v0.107.1].
### Changed
- The validation error message for duplicated allow- and blocklists in DNS
settings now shows the duplicated elements ([#3975]).
### Fixed
- `ipset` initialization bugs ([#4027]).
- Legacy DNS rewrites from a wildcard pattern to a subdomain ([#4016]).
- Service not being stopped before running the `uninstall` service action
([#3868]).
- Broken `reload` service action on FreeBSD.
- Legacy DNS rewrites responding from upstream when a request other than `A` or
`AAAA` is received ([#4008]).
- Panic on port availability check during installation ([#3987]).
- Incorrect application of rules from the OS's hosts files ([#3998]).
[#3868]: https://github.com/AdguardTeam/AdGuardHome/issues/3868
[#3975]: https://github.com/AdguardTeam/AdGuardHome/issues/3975
[#3987]: https://github.com/AdguardTeam/AdGuardHome/issues/3987
[#3998]: https://github.com/AdguardTeam/AdGuardHome/issues/3998
[#4008]: https://github.com/AdguardTeam/AdGuardHome/issues/4008
[#4016]: https://github.com/AdguardTeam/AdGuardHome/issues/4016
[#4027]: https://github.com/AdguardTeam/AdGuardHome/issues/4027
[ms-v0.107.1]: https://github.com/AdguardTeam/AdGuardHome/milestone/37?closed=1
## [v0.107.0] - 2021-12-21
See also the [v0.107.0 GitHub milestone][ms-v0.107.0].
### Added
- Upstream server information for responses from cache ([#3772]). Note that old
log entries concerning cached responses won't include that information.
- Finnish and Ukrainian localizations.
- Setting the timeout for IP address pinging in the "Fastest IP address" mode
through the new `fastest_timeout` field in the configuration file ([#1992]).
- Static IP address detection on FreeBSD ([#3289]).
- Optimistic cache ([#2145]).
- New possible value of `6h` for `querylog_interval` property ([#2504]).
- Blocking access using ClientIDs ([#2624], [#3162]).
- `source` directives support in `/etc/network/interfaces` on Linux ([#3257]).
- [RFC 9000][rfc-9000] support in QUIC.
- Completely disabling statistics by setting the statistics interval to zero
([#2141]).
- The ability to completely purge DHCP leases ([#1691]).
- Settable timeouts for querying the upstream servers ([#2280]).
- Configuration file properties to change group and user ID on startup on Unix
([#2763]).
- Experimental OpenBSD support for AMD64 and 64-bit ARM CPUs ([#2439], [#3225],
[#3226]).
- Support for custom port in DNS-over-HTTPS profiles for Apple's devices
([#3172]).
- `darwin/arm64` support ([#2443]).
- `freebsd/arm64` support ([#2441]).
- Output of the default addresses of the upstreams used for resolving PTRs for
private addresses ([#3136]).
- Detection and handling of recurrent PTR requests for locally-served addresses
([#3185]).
- The ability to completely disable reverse DNS resolving of IPs from
locally-served networks ([#3184]).
- New flag `--local-frontend` to serve dynamically changeable frontend files
from disk as opposed to the ones that were compiled into the binary.
### Changed
- Port bindings are now checked for uniqueness ([#3835]).
- The DNSSEC check now simply checks against the AD flag in the response
([#3904]).
- Client objects in the configuration file are now sorted ([#3933]).
- Responses from cache are now labeled ([#3772]).
- Better error message for ED25519 private keys, which are not widely supported
([#3737]).
- Cache now follows RFC more closely for negative answers ([#3707]).
- `dnsrewrite` rules and other DNS rewrites will now be applied even when the
protection is disabled ([#1558]).
- DHCP gateway address, subnet mask, IP address range, and leases validations
([#3529]).
- The `systemd` service script will now create the `/var/log` directory when it
doesn't exist ([#3579]).
- Items in allowed clients, disallowed clients, and blocked hosts lists are now
required to be unique ([#3419]).
- The TLS private key previously saved as a string isn't shown in API responses
anymore ([#1898]).
- Better OpenWrt detection ([#3435]).
- DNS-over-HTTPS queries that come from HTTP proxies in the `trusted_proxies`
list now use the real IP address of the client instead of the address of the
proxy ([#2799]).
- Clients who are blocked by access settings now receive a `REFUSED` response
when a protocol other than DNS-over-UDP and DNSCrypt is used.
- `dns.querylog_interval` property is now formatted in hours.
- Query log search now supports internationalized domains ([#3012]).
- Internationalized domains are now shown decoded in the query log with the
original encoded version shown in request details ([#3013]).
- When /etc/hosts-type rules have several IPs for one host, all IPs are now
returned instead of only the first one ([#1381]).
- Property `rlimit_nofile` is now in the `os` object of the configuration
file, together with the new `group` and `user` properties ([#2763]).
- Permissions on filter files are now `0o644` instead of `0o600` ([#3198]).
#### Configuration Changes
In this release, the schema version has changed from 10 to 12.
- Property `dns.querylog_interval`, which in schema versions 11 and earlier used
to be an integer number of days, is now a string with a human-readable
duration:
```yaml
# BEFORE:
'dns':
# …
'querylog_interval': 90
# AFTER:
'dns':
# …
'querylog_interval': '2160h'
```
To rollback this change, convert the property back into days and change the
`schema_version` back to `11`.
- Property `rlimit_nofile`, which in schema versions 10 and earlier used to be
on the top level, is now moved to the new `os` object:
```yaml
# BEFORE:
'rlimit_nofile': 42
# AFTER:
'os':
'group': ''
'rlimit_nofile': 42
'user': ''
```
To rollback this change, move the property on the top level and change the
`schema_version` back to `10`.
### Deprecated
- Go 1.16 support. v0.108.0 will require at least Go 1.17 to build.
### Fixed
- EDNS0 TCP keepalive option handling ([#3778]).
- Rules with the `denyallow` modifier applying to IP addresses when they
shouldn't ([#3175]).
- The length of the EDNS0 client subnet option appearing too long for some
upstream servers ([#3887]).
- Invalid redirection to the HTTPS web interface after saving enabled encryption
settings ([#3558]).
- Incomplete propagation of the client's IP anonymization setting to the
statistics ([#3890]).
- Incorrect results with the `dnsrewrite` modifier for entries from the
operating system's hosts file ([#3815]).
- Matching against rules with `|` at the end of the domain name ([#3371]).
- Incorrect assignment of explicitly configured DHCP options ([#3744]).
- Occasional panic during shutdown ([#3655]).
- Addition of IPs into only one as opposed to all matching ipsets on Linux
([#3638]).
- Removal of temporary filter files ([#3567]).
- Panic when an upstream server responds with an empty question section
([#3551]).
- 9GAG blocking ([#3564]).
- DHCP now follows RFCs more closely when it comes to response sending and
option selection ([#3443], [#3538]).
- Occasional panics when reading old statistics databases ([#3506]).
- `reload` service action on macOS and FreeBSD ([#3457]).
- Inaccurate using of service actions in the installation script ([#3450]).
- ClientID checking ([#3437]).
- Discovering other DHCP servers on `darwin` and `freebsd` ([#3417]).
- Switching listening address to unspecified one when bound to a single
specified IPv4 address on Darwin (macOS) ([#2807]).
- Incomplete HTTP response for static IP address.
- DNSCrypt queries weren't appearing in query log ([#3372]).
- Wrong IP address for proxied DNS-over-HTTPS queries ([#2799]).
- Domain name letter case mismatches in DNS rewrites ([#3351]).
- Conflicts between IPv4 and IPv6 DNS rewrites ([#3343]).
- Letter case mismatches in `CNAME` filtering ([#3335]).
- Occasional breakages on network errors with DNS-over-HTTP upstreams ([#3217]).
- Errors when setting static IP on Linux ([#3257]).
- Treatment of domain names and FQDNs in custom rules with the `dnsrewrite`
modifier that use the `PTR` type ([#3256]).
- Redundant hostname generating while loading static leases with empty hostname
([#3166]).
- Domain name case in responses ([#3194]).
- Custom upstreams selection for clients with ClientIDs in DNS-over-TLS and
DNS-over-HTTP ([#3186]).
- Incorrect client-based filtering applying logic ([#2875]).
### Removed
- Go 1.15 support.
[#1381]: https://github.com/AdguardTeam/AdGuardHome/issues/1381
[#1558]: https://github.com/AdguardTeam/AdGuardHome/issues/1558
[#1691]: https://github.com/AdguardTeam/AdGuardHome/issues/1691
[#1898]: https://github.com/AdguardTeam/AdGuardHome/issues/1898
[#1992]: https://github.com/AdguardTeam/AdGuardHome/issues/1992
[#2141]: https://github.com/AdguardTeam/AdGuardHome/issues/2141
[#2145]: https://github.com/AdguardTeam/AdGuardHome/issues/2145
[#2280]: https://github.com/AdguardTeam/AdGuardHome/issues/2280
[#2439]: https://github.com/AdguardTeam/AdGuardHome/issues/2439
[#2441]: https://github.com/AdguardTeam/AdGuardHome/issues/2441
[#2443]: https://github.com/AdguardTeam/AdGuardHome/issues/2443
[#2504]: https://github.com/AdguardTeam/AdGuardHome/issues/2504
[#2624]: https://github.com/AdguardTeam/AdGuardHome/issues/2624
[#2763]: https://github.com/AdguardTeam/AdGuardHome/issues/2763
[#2799]: https://github.com/AdguardTeam/AdGuardHome/issues/2799
[#2807]: https://github.com/AdguardTeam/AdGuardHome/issues/2807
[#3012]: https://github.com/AdguardTeam/AdGuardHome/issues/3012
[#3013]: https://github.com/AdguardTeam/AdGuardHome/issues/3013
[#3136]: https://github.com/AdguardTeam/AdGuardHome/issues/3136
[#3162]: https://github.com/AdguardTeam/AdGuardHome/issues/3162
[#3166]: https://github.com/AdguardTeam/AdGuardHome/issues/3166
[#3172]: https://github.com/AdguardTeam/AdGuardHome/issues/3172
[#3175]: https://github.com/AdguardTeam/AdGuardHome/issues/3175
[#3184]: https://github.com/AdguardTeam/AdGuardHome/issues/3184
[#3185]: https://github.com/AdguardTeam/AdGuardHome/issues/3185
[#3186]: https://github.com/AdguardTeam/AdGuardHome/issues/3186
[#3194]: https://github.com/AdguardTeam/AdGuardHome/issues/3194
[#3198]: https://github.com/AdguardTeam/AdGuardHome/issues/3198
[#3217]: https://github.com/AdguardTeam/AdGuardHome/issues/3217
[#3225]: https://github.com/AdguardTeam/AdGuardHome/issues/3225
[#3226]: https://github.com/AdguardTeam/AdGuardHome/issues/3226
[#3256]: https://github.com/AdguardTeam/AdGuardHome/issues/3256
[#3257]: https://github.com/AdguardTeam/AdGuardHome/issues/3257
[#3289]: https://github.com/AdguardTeam/AdGuardHome/issues/3289
[#3335]: https://github.com/AdguardTeam/AdGuardHome/issues/3335
[#3343]: https://github.com/AdguardTeam/AdGuardHome/issues/3343
[#3351]: https://github.com/AdguardTeam/AdGuardHome/issues/3351
[#3371]: https://github.com/AdguardTeam/AdGuardHome/issues/3371
[#3372]: https://github.com/AdguardTeam/AdGuardHome/issues/3372
[#3417]: https://github.com/AdguardTeam/AdGuardHome/issues/3417
[#3419]: https://github.com/AdguardTeam/AdGuardHome/issues/3419
[#3435]: https://github.com/AdguardTeam/AdGuardHome/issues/3435
[#3437]: https://github.com/AdguardTeam/AdGuardHome/issues/3437
[#3443]: https://github.com/AdguardTeam/AdGuardHome/issues/3443
[#3450]: https://github.com/AdguardTeam/AdGuardHome/issues/3450
[#3457]: https://github.com/AdguardTeam/AdGuardHome/issues/3457
[#3506]: https://github.com/AdguardTeam/AdGuardHome/issues/3506
[#3529]: https://github.com/AdguardTeam/AdGuardHome/issues/3529
[#3538]: https://github.com/AdguardTeam/AdGuardHome/issues/3538
[#3551]: https://github.com/AdguardTeam/AdGuardHome/issues/3551
[#3558]: https://github.com/AdguardTeam/AdGuardHome/issues/3558
[#3564]: https://github.com/AdguardTeam/AdGuardHome/issues/3564
[#3567]: https://github.com/AdguardTeam/AdGuardHome/issues/3567
[#3568]: https://github.com/AdguardTeam/AdGuardHome/issues/3568
[#3579]: https://github.com/AdguardTeam/AdGuardHome/issues/3579
[#3607]: https://github.com/AdguardTeam/AdGuardHome/issues/3607
[#3638]: https://github.com/AdguardTeam/AdGuardHome/issues/3638
[#3655]: https://github.com/AdguardTeam/AdGuardHome/issues/3655
[#3707]: https://github.com/AdguardTeam/AdGuardHome/issues/3707
[#3737]: https://github.com/AdguardTeam/AdGuardHome/issues/3737
[#3744]: https://github.com/AdguardTeam/AdGuardHome/issues/3744
[#3772]: https://github.com/AdguardTeam/AdGuardHome/issues/3772
[#3778]: https://github.com/AdguardTeam/AdGuardHome/issues/3778
[#3815]: https://github.com/AdguardTeam/AdGuardHome/issues/3815
[#3835]: https://github.com/AdguardTeam/AdGuardHome/issues/3835
[#3887]: https://github.com/AdguardTeam/AdGuardHome/issues/3887
[#3890]: https://github.com/AdguardTeam/AdGuardHome/issues/3890
[#3904]: https://github.com/AdguardTeam/AdGuardHome/issues/3904
[#3933]: https://github.com/AdguardTeam/AdGuardHome/pull/3933
[ms-v0.107.0]: https://github.com/AdguardTeam/AdGuardHome/milestone/23?closed=1
[rfc-9000]: https://datatracker.ietf.org/doc/html/rfc9000
## [v0.106.3] - 2021-05-19
See also the [v0.106.3 GitHub milestone][ms-v0.106.3].
### Added
- Support for reinstall (`-r`) and uninstall (`-u`) flags in the installation
script ([#2462]).
- Support for DHCP `DECLINE` and `RELEASE` message types ([#3053]).
### Changed
- Add microseconds to log output.
### Fixed
- Intermittent "Warning: ID mismatch" errors ([#3087]).
- Error when using installation script on some ARMv7 devices ([#2542]).
- DHCP leases validation ([#3107], [#3127]).
- Local PTR request recursion in Docker containers ([#3064]).
- Ignoring client-specific filtering settings when filtering is disabled in
general settings ([#2875]).
- Disallowed domains are now case-insensitive ([#3115]).
[#2462]: https://github.com/AdguardTeam/AdGuardHome/issues/2462
[#2542]: https://github.com/AdguardTeam/AdGuardHome/issues/2542
[#2875]: https://github.com/AdguardTeam/AdGuardHome/issues/2875
[#3053]: https://github.com/AdguardTeam/AdGuardHome/issues/3053
[#3064]: https://github.com/AdguardTeam/AdGuardHome/issues/3064
[#3107]: https://github.com/AdguardTeam/AdGuardHome/issues/3107
[#3115]: https://github.com/AdguardTeam/AdGuardHome/issues/3115
[#3127]: https://github.com/AdguardTeam/AdGuardHome/issues/3127
[ms-v0.106.3]: https://github.com/AdguardTeam/AdGuardHome/milestone/35?closed=1
## [v0.106.2] - 2021-05-06
See also the [v0.106.2 GitHub milestone][ms-v0.106.2].
### Fixed
- Uniqueness validation for dynamic DHCP leases ([#3056]).
[#3056]: https://github.com/AdguardTeam/AdGuardHome/issues/3056
[ms-v0.106.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/34?closed=1
## [v0.106.1] - 2021-04-30
See also the [v0.106.1 GitHub milestone][ms-v0.106.1].
### Fixed
- Local domain name handling when the DHCP server is disabled ([#3028]).
- Normalization of previously-saved invalid static DHCP leases ([#3027]).
- Validation of IPv6 addresses with zones in system resolvers ([#3022]).
[#3022]: https://github.com/AdguardTeam/AdGuardHome/issues/3022
[#3027]: https://github.com/AdguardTeam/AdGuardHome/issues/3027
[#3028]: https://github.com/AdguardTeam/AdGuardHome/issues/3028
[ms-v0.106.1]: https://github.com/AdguardTeam/AdGuardHome/milestone/33?closed=1
## [v0.106.0] - 2021-04-28
See also the [v0.106.0 GitHub milestone][ms-v0.106.0].
### Added
- The ability to block user for login after configurable number of unsuccessful
attempts for configurable time ([#2826]).
- `denyallow` modifier for filters ([#2923]).
- Hostname uniqueness validation in the DHCP server ([#2952]).
- Hostname generating for DHCP clients which don't provide their own ([#2723]).
- New flag `--no-etc-hosts` to disable client domain name lookups in the
operating system's /etc/hosts files ([#1947]).
- The ability to set up custom upstreams to resolve PTR queries for local
addresses and to disable the automatic resolving of clients' addresses
([#2704]).
- Logging of the client's IP address after failed login attempts ([#2824]).
- Search by clients' names in the query log ([#1273]).
- Verbose version output with `-v --version` ([#2416]).
- The ability to set a custom TLD or domain name for known hosts in the local
network ([#2393], [#2961]).
- The ability to serve DNS queries on multiple hosts and interfaces ([#1401]).
- `ips` and `text` DHCP server options ([#2385]).
- `SRV` records support in filtering rules with the `dnsrewrite` modifier
([#2533]).
### Changed
- Our DoQ implementation is now updated to conform to the latest standard
[draft][doq-draft-02] ([#2843]).
- Quality of logging ([#2954]).
- Normalization of hostnames sent by DHCP clients ([#2945], [#2952]).
- The access to the private hosts is now forbidden for users from external
networks ([#2889]).
- The reverse lookup for local addresses is now performed via local resolvers
([#2704]).
- Stricter validation of the IP addresses of static leases in the DHCP server
with regards to the netmask ([#2838]).
- Stricter validation of `dnsrewrite` filtering rule modifier parameters
([#2498]).
- New, more correct versioning scheme ([#2412]).
### Deprecated
- Go 1.15 support. v0.107.0 will require at least Go 1.16 to build.
### Fixed
- Multiple answers for a `dnsrewrite` rule matching requests with repeating
patterns in it ([#2981]).
- Root server resolving when custom upstreams for hosts are specified ([#2994]).
- Inconsistent resolving of DHCP clients when the DHCP server is disabled
([#2934]).
- Comment handling in clients' custom upstreams ([#2947]).
- Overwriting of DHCPv4 options when using the HTTP API ([#2927]).
- Assumption that MAC addresses always have the length of 6 octets ([#2828]).
- Support for more than one `/24` subnet in DHCP ([#2541]).
- Invalid filenames in the `mobileconfig` API responses ([#2835]).
### Removed
- Go 1.14 support.
[#1273]: https://github.com/AdguardTeam/AdGuardHome/issues/1273
[#1401]: https://github.com/AdguardTeam/AdGuardHome/issues/1401
[#1947]: https://github.com/AdguardTeam/AdGuardHome/issues/1947
[#2385]: https://github.com/AdguardTeam/AdGuardHome/issues/2385
[#2393]: https://github.com/AdguardTeam/AdGuardHome/issues/2393
[#2412]: https://github.com/AdguardTeam/AdGuardHome/issues/2412
[#2416]: https://github.com/AdguardTeam/AdGuardHome/issues/2416
[#2498]: https://github.com/AdguardTeam/AdGuardHome/issues/2498
[#2533]: https://github.com/AdguardTeam/AdGuardHome/issues/2533
[#2541]: https://github.com/AdguardTeam/AdGuardHome/issues/2541
[#2704]: https://github.com/AdguardTeam/AdGuardHome/issues/2704
[#2723]: https://github.com/AdguardTeam/AdGuardHome/issues/2723
[#2824]: https://github.com/AdguardTeam/AdGuardHome/issues/2824
[#2826]: https://github.com/AdguardTeam/AdGuardHome/issues/2826
[#2828]: https://github.com/AdguardTeam/AdGuardHome/issues/2828
[#2835]: https://github.com/AdguardTeam/AdGuardHome/issues/2835
[#2838]: https://github.com/AdguardTeam/AdGuardHome/issues/2838
[#2843]: https://github.com/AdguardTeam/AdGuardHome/issues/2843
[#2889]: https://github.com/AdguardTeam/AdGuardHome/issues/2889
[#2923]: https://github.com/AdguardTeam/AdGuardHome/issues/2923
[#2927]: https://github.com/AdguardTeam/AdGuardHome/issues/2927
[#2934]: https://github.com/AdguardTeam/AdGuardHome/issues/2934
[#2945]: https://github.com/AdguardTeam/AdGuardHome/issues/2945
[#2947]: https://github.com/AdguardTeam/AdGuardHome/issues/2947
[#2952]: https://github.com/AdguardTeam/AdGuardHome/issues/2952
[#2954]: https://github.com/AdguardTeam/AdGuardHome/issues/2954
[#2961]: https://github.com/AdguardTeam/AdGuardHome/issues/2961
[#2981]: https://github.com/AdguardTeam/AdGuardHome/issues/2981
[#2994]: https://github.com/AdguardTeam/AdGuardHome/issues/2994
[doq-draft-02]: https://tools.ietf.org/html/draft-ietf-dprive-dnsoquic-02
[ms-v0.106.0]: https://github.com/AdguardTeam/AdGuardHome/milestone/26?closed=1
## [v0.105.2] - 2021-03-10
### Security
- Session token doesn't contain user's information anymore ([#2470]).
See also the [v0.105.2 GitHub milestone][ms-v0.105.2].
### Fixed
- Incomplete hostnames with trailing zero-bytes handling ([#2582]).
- Wrong DNS-over-TLS ALPN configuration ([#2681]).
- Inconsistent responses for messages with EDNS0 and AD when DNS caching is
enabled ([#2600]).
- Incomplete OpenWrt detection ([#2757]).
- DHCP lease's `expired` field incorrect time format ([#2692]).
- Incomplete DNS upstreams validation ([#2674]).
- Wrong parsing of DHCP options of the `ip` type ([#2688]).
[#2470]: https://github.com/AdguardTeam/AdGuardHome/issues/2470
[#2582]: https://github.com/AdguardTeam/AdGuardHome/issues/2582
[#2600]: https://github.com/AdguardTeam/AdGuardHome/issues/2600
[#2674]: https://github.com/AdguardTeam/AdGuardHome/issues/2674
[#2681]: https://github.com/AdguardTeam/AdGuardHome/issues/2681
[#2688]: https://github.com/AdguardTeam/AdGuardHome/issues/2688
[#2692]: https://github.com/AdguardTeam/AdGuardHome/issues/2692
[#2757]: https://github.com/AdguardTeam/AdGuardHome/issues/2757
[ms-v0.105.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/32?closed=1
## [v0.105.1] - 2021-02-15
See also the [v0.105.1 GitHub milestone][ms-v0.105.1].
### Changed
- Increased HTTP API timeouts ([#2671], [#2682]).
- "Permission denied" errors when checking if the machine has a static IP no
longer prevent the DHCP server from starting ([#2667]).
- The server name sent by clients of TLS APIs is not only checked when
`strict_sni_check` is enabled ([#2664]).
- HTTP API request body size limit for the `POST /control/access/set` and `POST
/control/filtering/set_rules` HTTP APIs is increased ([#2666], [#2675]).
### Fixed
- Error when enabling the DHCP server when AdGuard Home couldn't determine if
the machine has a static IP.
- Optical issue on custom rules ([#2641]).
- Occasional crashes during startup.
- The field `"range_start"` in the `GET /control/dhcp/status` HTTP API response
is now correctly named again ([#2678]).
- DHCPv6 server's `ra_slaac_only` and `ra_allow_slaac` properties aren't reset
to `false` on update anymore ([#2653]).
- The `Vary` header is now added along with `Access-Control-Allow-Origin` to
prevent cache-related and other issues in browsers ([#2658]).
- The request body size limit is now set for HTTPS requests as well.
- Incorrect version tag in the Docker release ([#2663]).
- DNSCrypt queries weren't marked as such in logs ([#2662]).
[#2641]: https://github.com/AdguardTeam/AdGuardHome/issues/2641
[#2653]: https://github.com/AdguardTeam/AdGuardHome/issues/2653
[#2658]: https://github.com/AdguardTeam/AdGuardHome/issues/2658
[#2662]: https://github.com/AdguardTeam/AdGuardHome/issues/2662
[#2663]: https://github.com/AdguardTeam/AdGuardHome/issues/2663
[#2664]: https://github.com/AdguardTeam/AdGuardHome/issues/2664
[#2666]: https://github.com/AdguardTeam/AdGuardHome/issues/2666
[#2667]: https://github.com/AdguardTeam/AdGuardHome/issues/2667
[#2671]: https://github.com/AdguardTeam/AdGuardHome/issues/2671
[#2675]: https://github.com/AdguardTeam/AdGuardHome/issues/2675
[#2678]: https://github.com/AdguardTeam/AdGuardHome/issues/2678
[#2682]: https://github.com/AdguardTeam/AdGuardHome/issues/2682
[ms-v0.105.1]: https://github.com/AdguardTeam/AdGuardHome/milestone/31?closed=1
## [v0.105.0] - 2021-02-10
See also the [v0.105.0 GitHub milestone][ms-v0.105.0].
### Added
- Added more services to the "Blocked services" list ([#2224], [#2401]).
- `ipset` subdomain matching, just like `dnsmasq` does ([#2179]).
- ClientID support for DNS-over-HTTPS, DNS-over-QUIC, and DNS-over-TLS
([#1383]).
- The new `dnsrewrite` modifier for filters ([#2102]).
- The host checking API and the query logs API can now return multiple matched
rules ([#2102]).
- Detecting of network interface configured to have static IP address via
`/etc/network/interfaces` ([#2302]).
- DNSCrypt protocol support ([#1361]).
- A 5 second wait period until a DHCP server's network interface gets an IP
address ([#2304]).
- `dnstype` modifier for filters ([#2337]).
- HTTP API request body size limit ([#2305]).
### Changed
- `Access-Control-Allow-Origin` is now only set to the same origin as the
domain, but with an HTTP scheme as opposed to `*` ([#2484]).
- `workDir` now supports symlinks.
- Stopped mounting together the directories `/opt/adguardhome/conf` and
`/opt/adguardhome/work` in our Docker images ([#2589]).
- When `dns.bogus_nxdomain` option is used, the server will now transform
responses if there is at least one bogus address instead of all of them
([#2394]). The new behavior is the same as in `dnsmasq`.
- Post-updating relaunch possibility is now determined OS-dependently ([#2231],
[#2391]).
- Made the mobileconfig HTTP API more robust and predictable, add parameters and
improve error response ([#2358]).
- Improved HTTP requests handling and timeouts ([#2343]).
- Our snap package now uses the `core20` image as its base ([#2306]).
- New build system and various internal improvements ([#2271], [#2276], [#2297],
[#2509], [#2552], [#2639], [#2646]).
### Deprecated
- Go 1.14 support. v0.106.0 will require at least Go 1.15 to build.
- The `darwin/386` port. It will be removed in v0.106.0.
- The `"rule"` and `"filter_id"` fields in `GET /filtering/check_host` and
`GET /querylog` responses. They will be removed in v0.106.0 ([#2102]).
### Fixed
- Autoupdate bug in the Darwin (macOS) version ([#2630]).
- Unnecessary conversions from `string` to `net.IP`, and vice versa ([#2508]).
- Inability to set DNS cache TTL limits ([#2459]).
- Possible freezes on slower machines ([#2225]).
- A mitigation against records being shown in the wrong order on the query log
page ([#2293]).
- A JSON parsing error in query log ([#2345]).
- Incorrect detection of the IPv6 address of an interface as well as another
infinite loop in the `/dhcp/find_active_dhcp` HTTP API ([#2355]).
### Removed
- The undocumented ability to use hostnames as any of `bind_host` values in
configuration. Documentation requires them to be valid IP addresses, and now
the implementation makes sure that that is the case ([#2508]).
- `Dockerfile` ([#2276]). Replaced with the script
`scripts/make/build-docker.sh` which uses `scripts/make/Dockerfile`.
- Support for pre-v0.99.3 format of query logs ([#2102]).
[#1361]: https://github.com/AdguardTeam/AdGuardHome/issues/1361
[#1383]: https://github.com/AdguardTeam/AdGuardHome/issues/1383
[#2102]: https://github.com/AdguardTeam/AdGuardHome/issues/2102
[#2179]: https://github.com/AdguardTeam/AdGuardHome/issues/2179
[#2224]: https://github.com/AdguardTeam/AdGuardHome/issues/2224
[#2225]: https://github.com/AdguardTeam/AdGuardHome/issues/2225
[#2231]: https://github.com/AdguardTeam/AdGuardHome/issues/2231
[#2271]: https://github.com/AdguardTeam/AdGuardHome/issues/2271
[#2276]: https://github.com/AdguardTeam/AdGuardHome/issues/2276
[#2293]: https://github.com/AdguardTeam/AdGuardHome/issues/2293
[#2297]: https://github.com/AdguardTeam/AdGuardHome/issues/2297
[#2302]: https://github.com/AdguardTeam/AdGuardHome/issues/2302
[#2304]: https://github.com/AdguardTeam/AdGuardHome/issues/2304
[#2305]: https://github.com/AdguardTeam/AdGuardHome/issues/2305
[#2306]: https://github.com/AdguardTeam/AdGuardHome/issues/2306
[#2337]: https://github.com/AdguardTeam/AdGuardHome/issues/2337
[#2343]: https://github.com/AdguardTeam/AdGuardHome/issues/2343
[#2345]: https://github.com/AdguardTeam/AdGuardHome/issues/2345
[#2355]: https://github.com/AdguardTeam/AdGuardHome/issues/2355
[#2358]: https://github.com/AdguardTeam/AdGuardHome/issues/2358
[#2391]: https://github.com/AdguardTeam/AdGuardHome/issues/2391
[#2394]: https://github.com/AdguardTeam/AdGuardHome/issues/2394
[#2401]: https://github.com/AdguardTeam/AdGuardHome/issues/2401
[#2459]: https://github.com/AdguardTeam/AdGuardHome/issues/2459
[#2484]: https://github.com/AdguardTeam/AdGuardHome/issues/2484
[#2508]: https://github.com/AdguardTeam/AdGuardHome/issues/2508
[#2509]: https://github.com/AdguardTeam/AdGuardHome/issues/2509
[#2552]: https://github.com/AdguardTeam/AdGuardHome/issues/2552
[#2589]: https://github.com/AdguardTeam/AdGuardHome/issues/2589
[#2630]: https://github.com/AdguardTeam/AdGuardHome/issues/2630
[#2639]: https://github.com/AdguardTeam/AdGuardHome/issues/2639
[#2646]: https://github.com/AdguardTeam/AdGuardHome/issues/2646
[ms-v0.105.0]: https://github.com/AdguardTeam/AdGuardHome/milestone/27?closed=1
## [v0.104.3] - 2020-11-19
See also the [v0.104.3 GitHub milestone][ms-v0.104.3].
### Fixed
- The accidentally exposed profiler HTTP API ([#2336]).
[#2336]: https://github.com/AdguardTeam/AdGuardHome/issues/2336
[ms-v0.104.3]: https://github.com/AdguardTeam/AdGuardHome/milestone/30?closed=1
## [v0.104.2] - 2020-11-19
See also the [v0.104.2 GitHub milestone][ms-v0.104.2].
### Added
- This changelog :-) ([#2294]).
- `HACKING.md`, a guide for developers.
### Changed
- Improved tests output ([#2273]).
### Fixed
- Query logs from file not loading after the ones buffered in memory ([#2325]).
- Unnecessary errors in query logs when switching between log files ([#2324]).
- `404 Not Found` errors on the DHCP settings page on Windows. The page now
correctly shows that DHCP is not currently available on that OS ([#2295]).
- Infinite loop in `/dhcp/find_active_dhcp` ([#2301]).
[#2273]: https://github.com/AdguardTeam/AdGuardHome/issues/2273
[#2294]: https://github.com/AdguardTeam/AdGuardHome/issues/2294
[#2295]: https://github.com/AdguardTeam/AdGuardHome/issues/2295
[#2301]: https://github.com/AdguardTeam/AdGuardHome/issues/2301
[#2324]: https://github.com/AdguardTeam/AdGuardHome/issues/2324
[#2325]: https://github.com/AdguardTeam/AdGuardHome/issues/2325
[ms-v0.104.2]: https://github.com/AdguardTeam/AdGuardHome/milestone/28?closed=1
<!--
[Unreleased]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.14...HEAD
[v0.107.14]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.13...v0.107.14
-->
[Unreleased]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.13...HEAD
[v0.107.13]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.12...v0.107.13
[v0.107.12]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.11...v0.107.12
[v0.107.11]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.10...v0.107.11
[v0.107.10]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.9...v0.107.10
[v0.107.9]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.8...v0.107.9
[v0.107.8]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.7...v0.107.8
[v0.107.7]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.6...v0.107.7
[v0.107.6]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.5...v0.107.6
[v0.107.5]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.4...v0.107.5
[v0.107.4]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.3...v0.107.4
[v0.107.3]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.2...v0.107.3
[v0.107.2]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.1...v0.107.2
[v0.107.1]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.107.0...v0.107.1
[v0.107.0]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.3...v0.107.0
[v0.106.3]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.2...v0.106.3
[v0.106.2]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.1...v0.106.2
[v0.106.1]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.106.0...v0.106.1
[v0.106.0]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.105.2...v0.106.0
[v0.105.2]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.105.1...v0.105.2
[v0.105.1]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.105.0...v0.105.1
[v0.105.0]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.104.3...v0.105.0
[v0.104.3]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.104.2...v0.104.3
[v0.104.2]: https://github.com/AdguardTeam/AdGuardHome/compare/v0.104.1...v0.104.2