77 lines
2.5 KiB
Markdown
77 lines
2.5 KiB
Markdown
# Jumpdrive
|
|
|
|
A swiss army knife for mobile devices, currently supporting:
|
|
|
|
- Pine64 PineTab
|
|
- Pine64 PinePhone
|
|
- Purism Librem 5
|
|
- Xiaomi Pocophone F1
|
|
- OnePlus 6
|
|
- OnePlus 6T
|
|
|
|
You can use this to flash a image **directly to eMMC**, troubleshooting a broken system, and a lot more.
|
|
|
|
### Table of Contents
|
|
- [Installation](#installation)
|
|
- [Building](#building)
|
|
- [List of projects being used in Jumpdrive](#this-project-is-built-on)
|
|
|
|
### Installation
|
|
Download the latest image for your device [here](https://github.com/dreemurrs-embedded/Jumpdrive/releases)
|
|
|
|
|
|
#### PinePhone / PineTab
|
|
|
|
Then use dd to flash the image to an SD card. Jumpdrive is pretty small, so there is no need for a large storage SD card.
|
|
|
|
Insert the SD card to the device, then boot it up, you should get a nice splash screen and you should see a new storage device after you plug the device to USB.
|
|
|
|
With the device plugged in, you can now flash a distro, or fix a unbootable installation.
|
|
|
|
**WARNING:**
|
|
In case eMMC isn't showing up try to charge your battery and try again. There are reports of people not being able to flash to eMMC with discharged battery.
|
|
|
|
#### Librem 5
|
|
|
|
Extract the downloaded JumpDrive release archive for the Librem 5, put the device into flash mode, then run the `boot-purism-librem5.sh` script from the release.
|
|
|
|
### Xiaomi Pocophone F1 / OnePlus 6 / OnePlus 6T
|
|
|
|
Boot the image using `fastboot boot`.
|
|
|
|
### Building
|
|
|
|
The dependencies are:
|
|
|
|
- aarch64-linux-gnu- toolchain
|
|
- u-boot tools
|
|
- mtools
|
|
|
|
Additional dependencies for the Purism Librem 5:
|
|
- arm-none-eabi- toolchain
|
|
- uuu
|
|
|
|
Additional dependencies for the Xiaomi Pocophone F1 / OnePlus 6 / OnePlus 6T:
|
|
- mkbootimg
|
|
|
|
```shell-session
|
|
$ git submodule update --init --recursive
|
|
Downloads the projects to build
|
|
|
|
$ make -j8 pine64-pinephone.img.xz
|
|
Builds everything needed for the pinephone image...
|
|
|
|
$ make -j8 initramfs-pine64-pinephone.gz
|
|
Generate only the initramfs for the pinephone
|
|
|
|
$ make -j8 all
|
|
Generates an image for every supported platform in parallel
|
|
```
|
|
|
|
### This project is built on:
|
|
- [Busybox](https://busybox.net) - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).
|
|
- [postmarketOS](https://postmarketos.org) scripts - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).
|
|
- [Pine64's kernel fork](https://gitlab.com/pine64-org/linux) - which is [GPLv2](https://www.gnu.org/licenses/old-licenses/gpl-2.0.en.html).
|
|
- [U-Boot](https://github.com/u-boot/u-boot) - which has [multiple licenses](https://github.com/u-boot/u-boot/tree/master/Licenses)
|
|
|