f2cce11cc8
Fixed Issue 9
...
https://github.com/EspoTek/Labrador/issues/9
2018-02-06 03:41:20 +11:00
ca2406b2db
Cleaned junk out of repo.
...
Still need to edit history
Former-commit-id: e2061432d4b3d2bbb1f9621f3cce34d43b682b2a
Former-commit-id: aeeed8aa2af692f92b7ea7ec8cc042d49c679ce5
2017-10-21 16:11:49 +11:00
5ddf4383b2
Android Initial Release
...
Former-commit-id: d192210b8c
2017-06-30 14:02:18 +10:00
201b3bedbe
Nothing to see here
...
Former-commit-id: f079a7f4f1
2017-05-13 11:29:25 +10:00
69955a52bd
Added Fuse Bypass
...
Just to be safe...
Former-commit-id: f78a868e8b
2017-04-25 11:39:55 +10:00
8500a89f14
New Gerbers published
...
Very few changes. Fuse added, port moved.
Former-commit-id: 56b13e9a95
2017-04-18 12:55:55 +10:00
440cbed9a7
Added files for Android deployment. Added references to PCB on layer "Dwgs.User"
...
Former-commit-id: a9e38c8115
2017-02-18 13:38:18 +11:00
78454dc96d
Fixed little PCB glitch
...
Pre-compiled stuff all changed due to move from Qt 5.7.0 to Qt 5.7.1
Former-commit-id: 3ddc37a4b5
2017-02-18 11:43:29 +11:00
b28bad3bb7
Quick PCB finalisationsion, lowered priority of tiny_dma_set_mode_x; looks like it's stopped the problem of "too much switching drops packet
...
Former-commit-id: c5e94e6812
2017-02-07 10:10:36 +11:00
cdf9da1562
Merged trying-calibration into master
...
Very, very hackily...
Former-commit-id: f929191825
2017-02-03 17:34:54 +11:00
9db4972573
Mode 1 Up
...
Mode 1 moved to the new system. Same notes as mode 0.
Former-commit-id: 3d5c2b0b0a
2016-12-16 14:23:06 +11:00
68453fe220
Triple endpoints working in SW now
...
Added triple endpoint support for the Desktop interface.
Should be possible to fix the one-packet-per-sample glitch easily, now.
Even if it isn't, the device now only needs to reserve 768 bytes/frame,
not 1023!!!!
Former-commit-id: 5769288a11
2016-12-15 09:52:43 +11:00
adaaa63eb7
Added more #defines to code
...
These #defines are located in desktop_settings.h and allow you to edit
how many samples are discarded per packet. The idea was to use this to
test the MCU-side code and ensure that it doesn't corrupt a packet per
frame, but this seems to have magically disappeared (???).
I remember queueing USB transfers a long time ago, but can't remember
this having any success. It's more likely to just be a random clock
skew issue that only appears on some boards - and it's only "fixed" on
the one particular test board I have in hand now. I think.
Former-commit-id: b32392b525
2016-11-28 10:38:14 +11:00
e1c451ebb2
Plotted and done
...
Made up the silkscreen layers, put down the stabiliser pin and it's all
ready to be sent off now!
Former-commit-id: 1c6201a7f3
2016-11-23 12:16:40 +11:00
2069cf2e16
FInished the board.
...
Just need to position balange pins. Design seems tight, with really low
power supply distances.
Former-commit-id: 0964cc7e6a
2016-11-22 21:06:41 +11:00
9879262085
Redoing the board
...
Signal gen and PSU wired in. Very happy!
Former-commit-id: b521416f48
2016-11-22 14:01:56 +11:00
09b492bfd0
Swapped all components to SMD
...
Board too dense. Going to start again.
Former-commit-id: edf9c8904b
2016-11-22 10:03:11 +11:00
542daed722
More board work.
...
It's a bit dense; some would say unnecessarily so. Might see what I can
do with it in the morning but there's a reasonable chance it'll become
unworkable.
Former-commit-id: a1e508cc1a
2016-11-20 21:17:47 +11:00
f758213761
PSU in place
...
First attempt, anyway. Far shorter grounding than last rev! Very
happy!
Former-commit-id: f0fa88c473
2016-11-20 18:39:26 +11:00
8b8a748a5d
Named headers
...
Also there's now an empty kicad_pcb file.
Former-commit-id: 59c472fedb
2016-11-20 17:35:25 +11:00
b55a66a0f2
Error fix from last eschema
...
Accidentally set 2x4 headers rather than 1x4. This has been fixed.
Former-commit-id: c5408e5c1b
2016-11-20 17:31:44 +11:00
fedc1f8892
Another Eschema Update
...
Have changed pinout of scope.
Still haven't added SMD pads for inductor/diode since the Element14 is
not playing ball.
Former-commit-id: 3dde628793
2016-11-20 17:29:05 +11:00
2318c94755
New Eschema
...
- Reverted the dual transistor IC back to a single transistor (TSM
thingo)
- Added PSU indicator LED
- Added PSU control/expansion header.
Note that this is only in eschema, not pcbnew!
Former-commit-id: 059d5cbe65
2016-11-20 15:52:25 +11:00
95c5a4b95d
Undid PCB revert
...
I don't want to deal with KiCAD's library management again. The first
time was bad enough.
Former-commit-id: 2696688130
2016-11-19 18:20:44 +11:00
44bf2d39c4
Reverted PCB files to initial upload
...
Going to have a final attempt now!
Former-commit-id: bf98f0796f
2016-11-19 17:42:15 +11:00
323eede224
PCB update
...
Former-commit-id: 6731cfb7f1
2016-10-26 10:31:04 +11:00
920cfea03d
New PCB
...
New version of PCB for the "shape the dev" folks
Former-commit-id: ddda840a5e
2016-10-18 08:52:34 +11:00
ce3dd09245
Code dump
...
Adding the code!
Former-commit-id: 2ff768b58d
2016-09-07 16:36:43 +10:00
Chris Esposito