mirror of https://github.com/EspoTek/Labrador.git
55 lines
2.0 KiB
Markdown
55 lines
2.0 KiB
Markdown
# What is it?
|
|
The EspoTek Labrador is an open-source board that converts your PC, Raspberry Pi or Android Smartphone and into a full-featured electronics lab bench, complete with oscilloscope, signal generator and more.
|
|
|
|
More information available at:
|
|
http://espotek.com/labrador
|
|
|
|
This repo hosts all of the software and hardware that makes Labrador possible.
|
|
|
|
# Documentation and Software
|
|
To download binary (executable) versions of the software, go to:
|
|
|
|
https://github.com/espotek/labrador/releases
|
|
|
|
For the documentation, please visit:
|
|
|
|
https://github.com/espotek/labrador/wiki
|
|
|
|
# Licence
|
|
All software files are licenced under GNU GPL v3. https://www.gnu.org/licenses/gpl.html
|
|
|
|
All hardware files (schematics, PCB) are licenced under Creative Commons 4.0 (CC BY-NC-SA). https://creativecommons.org/licenses/by-nc-sa/4.0/
|
|
|
|
# Building from Source
|
|
I use Qt Creator to build the software interface.
|
|
https://www.qt.io/download-open-source/
|
|
Open Desktop_Interface/Labrador.pro, then Clean All -> Run qmake -> Build All.
|
|
If you're on Linux (including Raspberry Pi), then you can also build the software from source by cloning the repo, cd'ing to the Desktop_Interface directory then running:
|
|
```
|
|
qmake
|
|
make
|
|
sudo make install
|
|
```
|
|
Then, to launch, just type "labrador" into the terminal.
|
|
|
|
To build the AVR software, I use Atmel Studio 7. Just load up the .atsln and push F7. You can use avr-gcc if you don't want to install a full IDE.
|
|
|
|
The PCB files can be edited in KiCAD 4.0.
|
|
|
|
# Known bugs.
|
|
Most of the main bugs have now been fixed, including all synchronisation issues.
|
|
Please open an issue if you're aware of any in particular.
|
|
|
|
# Collaboration
|
|
If you want to make any suggestions, or better yet, submit some code, please do so here at GitHub.
|
|
|
|
Suggestions and feature requests belong on the "Issues" page.
|
|
|
|
For code submissions, look into Pull Requests. Or you can open an issue. I'm not picky. :)
|
|
|
|
If you just want to say hello and remind me that people are actually using my product, please email admin@espotek.com
|
|
|
|
Thanks to all.
|
|
|
|
~Chris
|