mirror of https://github.com/EspoTek/Labrador.git
2.7 KiB
2.7 KiB
1 | Id | Designator | Package | Quantity | Designation | Description | Notes |
---|---|---|---|---|---|---|---|
2 | 1 | C6,C9,C15 | c_elec_4x5.3 | 3 | CP1 | SMD Electrolytic Capacitor, 33uH 16V | Exact brand is not important but should be reputable (Nichicon, Panasonic, Rubycon etc.) |
3 | 2 | IC1 | LQFP-44_10x10mm_Pitch0.8mm | 1 | ATXMEGA16A4U-A | ATXMEGA32A4U-AU | Please be careful! There is a similar chip called the ATXMEGA32-A4-AU that will cause the product to fail! |
4 | 3 | P2 | USB_Micro-B_WIDE | 1 | USB_OTG | Micro USB-B connector | |
5 | 5 | C1,C2,C7,C8,C10,C11,C12, C13,C14,C16,C17,C18 | C_0603 | 12 | C | 1uF 0603 Ceramic Cap | Exact brand is not important but should be reputable (Vishay, Kemet, Murata etc.) |
6 | 6 | C3,C4,C5 | C_0603 | 3 | C_Small | 1uF 0603 Ceramic Cap | Exact brand is not important but should be reputable (Vishay, Kemet, Murata etc.) |
7 | 7 | D1 | SMA_Standard | 1 | D_Schottky | SMA Schottky Diode, 1.5V 1A | http://il.farnell.com/multicomp/ss14/schottky-diode-1a-40v-sma-full/dp/1843479 |
8 | 8 | D2 | LED_0603 | 1 | LED | 0603 LED | Exact brand is not important but should be reputable. |
9 | 9 | F1 | C_1210 | 1 | F_Small | PTC Fuse, 150-250mA, 1210 | |
10 | 10 | L1 | SELF-WE-PD-XXL | 1 | INDUCTOR | SMD Inductor (self-wound package) | Haven’t found exact unit yet. Must be at least 100uH, though. |
11 | 11 | L2,L3,L4 | R_1206 | 3 | INDUCTOR | SMD Inductor 15uH 1206 | |
12 | 4 | P1,P5 | Pin_Header_Straight_1x04 | 2 | SCOPE_OUT | Female 1x4 header | |
13 | 12 | P3, P4, P6 | - | 1 | DIG_OUT | Stackable 1x10 Header | P3, P4 and P6 share a single header. Please do not use flimsy/weak pins! |
14 | P7 | Pin_Header_Straight_1x02 | 1 | PSU | Stackable 1x2 Header | “Stackable” refers to the pins that are female on one side and male on the other, like on many Arduino shields. | |
15 | 16 | P8 | Pin_Header_Straight_1x02 | 1 | DIG_IN | Female 1x2 Header | |
16 | 17 | P10 | Pin_Header_Straight_1x03 | 1 | EXPANSION | - | Unpopulated |
17 | 18 | P11 | Pin_Header_Straight_1x03 | 1 | SWITCH | Male 1x3 Header | |
18 | 26 | REF** | Pin_Header_Straight_1x02 | 1 | Pin_Header_Straight_1x02 | Male 1x2 Header | This will need to be soldered on to the bottom of the board. |
19 | 19 | Q1 | SOT-23-3 | 1 | Q_NMOS_GSD | TSM2302CX | |
20 | 20 | R1,R2 | R_0603 | 2 | 1M | 1M Resistor, 0603, 20V | Exact brand is not important but should be reputable (Vishay, Kemet, Yageo etc.) |
21 | 21 | R3,R4 | R_0603 | 2 | 75K | 75K Resistor, 0603, 6.3V | Exact brand is not important but should be reputable (Vishay, Kemet, Yageo etc.) |
22 | 22 | R5,R6,R15,R16,R17,R18,R19,R20,R21,R26,R28,R29,R30,R31,R32 | R_0603 | 15 | 1K | 1K Resistor, 0603, 16V | Exact brand is not important but should be reputable (Vishay, Kemet, Yageo etc.) |
23 | 23 | R7,R8,R9,R10,R11,R12,R13,R14,R22,R23,R24,R25 | R_0603 | 12 | 28R | 28R Resistor, 0603, 6.3V | Exact brand is not important but should be reputable (Vishay, Kemet, Yageo etc.) |
24 | 24 | R27 | R_0603 | 1 | 100R | 100R Resistor, 6.3V | Exact brand is not important but should be reputable (Vishay, Kemet, Yageo etc.) |
25 | 25 | U1 | SOT-23-3 | 1 | VREG | RT9161A-33GV | |
26 | 26 | U2 | SOIC-14_3.9x8.7mm_Pitch1.27mm | 1 | LM324 | LM324DT | |
27 | 27 | U3,U4 | SOT-363 | 2 | DMN63D8LDW | DMN63D8LDW |