Sandboxie/CHANGELOG.md

1063 lines
58 KiB
Markdown
Raw Blame History

This file contains ambiguous Unicode characters

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

# Changelog
All notable changes to this project will be documented in this file.
This project adheres to [Semantic Versioning](http://semver.org/).
## [0.9.1 / 5.51.1] - 2021-07-??
### Added
- added tray icon indicating no connection to the driver if it happens
- added option to customize the tray icon
- added "DllSkipHook=some.dll" option to disable installation of hooks into selected DLLs
- added localization support for Plus installer (by yfdyh000 and mpheath) [#923](https://github.com/sandboxie-plus/Sandboxie/pull/923)
### Changed
- reworked NtClose handling for better performance and extendibility
### Fixed
- fixed issue with fake admin and some NSIS installers [#1052](https://github.com/sandboxie-plus/Sandboxie/issues/1052)
- fixed more issued with FileDispositionInformation behaviour, which resulted in bogus file deletion handling
- fixed issue with checking WFP status
- fixed issue WFP failing to initialize at boot
- fixed issue with tray sandbox options not being available just after boot
## [0.9.0 / 5.51.0] - 2021-07-29
### Added
- added support for Windows Filtering Platform (WFP) to be used instead of the device-based network blocking scheme
-- to enable this support, add 'NetworkEnableWFP=y' to the global section and reboot or reload the driver
-- to use WFP for a specific sandbox, add 'AllowNetworkAccess=n'
-- you can allow certain processes by using 'AllowNetworkAccess=program.exe,y'
-- you can also enable this policy globally by adding 'AllowNetworkAccess=n' to the global section
-- in this case you can exempt entire sandboxes by adding 'AllowNetworkAccess=y' to specific boxes
-- you can block certain processes by using 'AllowNetworkAccess=program.exe,n'
-- Note: WFP is less absolute than the old approach, using WFP will filter only TCP/UDP communication
-- restricted boxed processes will still be able to resolve domain names using the system service
-- however, they will not be able to send or receive data packets directly
-- the advantages of WFP is that filter rules can be implemented by restricting communication only to specified addresses or selected ports using "NetworkAccess=..."
- added fully functional rule-based packet filter in user mode for the case when "NetworkEnableWFP=y" is not set
-- the mechanism replaces the old "BlockPort=..." functionality
-- Note: this filter applies only to outgoing connections/traffic, for incoming traffic either the WFP mode or a third-party firewall is needed
-- like the old user mode based mechanism, malicious applications can bypass it by unhooking certain functions
-- hence it's recommended to use the kernel mode WFP-based mechanism when reliable isolation is required
- added new trace option "NetFwTrace=*" to trace the actions of the firewall components
-- please note that the driver only trace logs the kernel debug output, use DbgView.exe to log
- API_QUERY_PROCESS_INFO can now be used to get the impersonation token of a sandboxed thread
-- Note: this capability is used by TaskExplorer to allow inspecting sandbox-internal tokens
-- Note: a process must have administrative privileges to be able to use this API
- added a UI option to switch "MsiInstallerExemptions=y" on and off
-- just in case a future Windows build breaks something in the systemless mode
- added sample code for ObRegisterCallbacks to the driver
- added new debug options "DisableFileFilter=y" and "DisableKeyFilter=y" that allow to disable file and registry filtering
-- Note: these options are for testing only and disable core parts of the sandbox isolation
- added a few command line options to SandMan.exe
### Changed
- greatly improved the performance of the trace log, but it's no longer possible to log to both SandMan and SbieCtrl at the same time
- reworked process creation code to use PsSetCreateProcessNotifyRoutineEx and improved process termination
### Fixed
- added missing hook for ConnectEx function
## [0.8.9 / 5.50.9] - 2021-07-28 HotFix 2
### Fixed
Fixed issue with registering session leader
## [0.8.9 / 5.50.9] - 2021-07-28 HotFix 1
### Fixed
Fixed issue with Windows 7
## [0.8.9 / 5.50.9] - 2021-07-27
### Changed
- updated a few icons
- updated GitHub build action to use Qt 5.15.2
- improved the "full" tray icon to be more distinguishable from the "empty" one
- changed code integrity verification policies [#1003](https://github.com/sandboxie-plus/Sandboxie/issues/1003)
-- code signature is no longer required to change config, to protect presets use the existing "EditAdminOnly=y"
### Fixed
- fixed issue with systemless MSI mode introduced in the last build
- fixed MSI installer not being able to create the action server mechanism on Windows 11
- fixed MSI installer not working in systemless mode on Windows 11
- fixed Inno Setup script not being able to remove shell integration keys during Sandboxie Plus uninstall (by mpheath) [#1037](https://github.com/sandboxie-plus/Sandboxie/pull/1037)
## [0.8.8 / 5.50.8] - 2021-07-13
### Changed
- MSIServer no longer requires being run as system; this completes the move to not use system tokens in a sandbox by default
-- the security-enhanced option "MsiInstallerExemptions=n" is now the default behaviour
### Fixed
- fixed issue with the "Explore Sandboxed" command [#972](https://github.com/sandboxie-plus/Sandboxie/issues/972)
- rolled back the switch from using NtQueryKey to NtQueryObject as it seems to break some older Windows 10 versions like 1803 [#984](https://github.com/sandboxie-plus/Sandboxie/issues/984)
-- this change was introduced to fix [#951](https://github.com/sandboxie-plus/Sandboxie/issues/951)
-- to use NtQueryObject the option "UseObjectNameForKeys=y" can be added to Sandboxie.ini
## [0.8.7b / 5.50.7] - 2021-07-11
### Fixed
- fixed issue with boxes that had auto-delete activated introduced in the previous build [#986](https://github.com/sandboxie-plus/Sandboxie/issues/986)
## [0.8.7 / 5.50.7] - 2021-07-10
### Added
- added option to always auto-pick the DefaultBox [#959](https://github.com/sandboxie-plus/Sandboxie/issues/959)
-- when this option is enabled, the normal behaviour with a box selection dialog can be brought up by holding down CTRL
- added option to hide a sandbox from the "run in box" dialog
-- useful to avoid listing insecure compatibility test boxes for example
- added box options to system tray [#439](https://github.com/sandboxie-plus/Sandboxie/issues/439) [#272](https://github.com/sandboxie-plus/Sandboxie/issues/272)
### Changed
- changed default "terminate all boxed processes" key from Ctrl+Pause to Ctrl+Alt+Pause [#974](https://github.com/sandboxie-plus/Sandboxie/issues/974)
- Start.exe no longer links in unused MFC code, which reduced its file size from over 2.5 MB to below 250 KB
- updated the main SandMan and tray icon [#963](https://github.com/sandboxie-plus/Sandboxie/issues/963)
- improved the box tree-style view
### Fixed
- added additional delay and retries to KmdUtil.exe to mitigate issues when unloading the driver [#968](https://github.com/sandboxie-plus/Sandboxie/issues/968)
- fixed issue with SbieCtrl not being properly started after setup [#969](https://github.com/sandboxie-plus/Sandboxie/issues/969)
- fixed issue with "explore sandboxed" shell option [#972](https://github.com/sandboxie-plus/Sandboxie/issues/972)
- fixed issue when running SandMan elevated [#932](https://github.com/sandboxie-plus/Sandboxie/issues/932)
- fixed new box selection dialog showing disabled boxes
- fixed issue updating box active status
### Removed
- removed Online Armor support as this product is deprecated since 2016
## [0.8.6 / 5.50.6] - 2021-07-07
### Added
- added LibreWolf template (by Dyras) [#929](https://github.com/sandboxie-plus/Sandboxie/pull/929)
### Fixed
- fixed performance bug introduced in 0.8.5
## [0.8.5 / 5.50.5] - 2021-07-06
### Added
- added global hotkey to terminate all sandboxed processes (default: Ctrl+Pause)
- the Run Sandboxed dialog can now be handled by the SandMan UI
- added "AllowBoxedJobs=y" allowing boxed processes to use nested jobs on Windows 8 and later
-- Note: this allows Chrome and other programs to use the job system for additional isolation
- added Librewolf.exe to the list of Firefox derivatives [#927](https://github.com/sandboxie-plus/Sandboxie/issues/927)
- added run regedit sandboxed menu command
- added new support settings tab to SandMan UI for updates and news
- added code integrity verification to Sbie service and UI
- added template for Vivaldi Notes (by isaak654) [#948](https://github.com/sandboxie-plus/Sandboxie/issues/948)
### Changed
- replaced the Process List used by the driver with a much faster Hash Map implementation
-- Note: this change provides an almost static system call speed of 1.2µs regardless of the running process count
-- The old list, with 100 programs running required 4.5µs; with 200: 12µs; and with 300: 18µs per syscall
-- Note: some of the slowdown was also affecting non-sandboxed applications due to how the driver handles certain callbacks
- replaced the per-process Thread List used by the driver with a much faster Hash Map implementation
- replaced configuration section list with a hash map to improve configuration performance, and increased line limit to 100000
-- not yet enabled in production build
- the presence of the default box is only checked on connect
- the portable directory dialog now shows the directory [#924](https://github.com/sandboxie-plus/Sandboxie/issues/924)
- when terminated, boxed processes now first try doing that by terminating the job object
- the driver now can terminate problematic processes by default without the help of the service
- the box delete routine now retries up to 10 times, see [#954](https://github.com/sandboxie-plus/Sandboxie/issues/954)
- replaced the Process List used by the service with a much faster Hash Map implementation
- replaced the per-process Thread List used by the service with a much faster Hash Map implementation
### Fixed
- fixed faulty initialization in SetServiceStatus (by flamencist) [#921](https://github.com/sandboxie-plus/Sandboxie/issues/921)
- fixed buttons position in Classic UI settings (by isaak654) [#914](https://github.com/sandboxie-plus/Sandboxie/issues/914)
- fixed missing password length check in the SandMan UI [#925](https://github.com/sandboxie-plus/Sandboxie/issues/925)
- fixed issues opening job objects by name
- fixed missing permission check when reopening job object handles (thanks Diversenok)
- fixed issue with some Chromium 90+ hooks affecting the display of PDFs in derived browsers [#930](https://github.com/sandboxie-plus/Sandboxie/issues/930) [#817](https://github.com/sandboxie-plus/Sandboxie/issues/817)
- fixed issues with reconnecting broken LPC ports used for communication with SbieSvc
- fixed minor setting issue [#957](https://github.com/sandboxie-plus/Sandboxie/issues/957)
- fixed minor UI issue with resource access COM settings [#958](https://github.com/sandboxie-plus/Sandboxie/issues/958)
- fixed an issue with NtQueryKey using NtQueryObject instead [#951](https://github.com/sandboxie-plus/Sandboxie/issues/951)
- fixed crash in key.c when failing to resolve key paths
- added workaround for topmost modality issue [#873](https://github.com/sandboxie-plus/Sandboxie/issues/873)
-- the notification window is not only topmost for 5 seconds
- fixed an issue deleting directories introduced in 5.49.5
- fixed an issue when creating box copies
### Removed
- removed switch for "BlockPassword=n" as it does not seem to be working [#938](https://github.com/sandboxie-plus/Sandboxie/issues/938)
-- it's recommended to use "OpenSamEndpoint=y" to allow password changes in Windows 10
## [0.8.2 / 5.50.2] - 2021-06-15
### Changed
- split anti-phishing rules per browser (by isaak654) [#910](https://github.com/sandboxie-plus/Sandboxie/pull/910)
### Fixed
- properly fixed an issue with Driver Verifier and user handles [#906](https://github.com/sandboxie-plus/Sandboxie/issues/906)
- fixed an issue with CreateWindow function introduced with 0.8.0
- fixed issue with outdated BoxDisplayOrder entries being retained [#900](https://github.com/sandboxie-plus/Sandboxie/issues/900)
## [0.8.1 / 5.50.1] - 2021-06-14
### Fixed
- fixed an issue with Driver Verifier and user handles
- fixed driver memory leak of FLT_FILE_NAME_INFORMATION objects
- fixed broken clipboard introduced in 5.50.0 [#899](https://github.com/sandboxie-plus/Sandboxie/issues/899)
- fixed DcomLaunch issue on Windows 7 32 bit introduced in 5.50.0 [#898](https://github.com/sandboxie-plus/Sandboxie/issues/898)
## [0.8.0 / 5.50.0] - 2021-06-13
### Added
- Sandboxie now applies by default "Close...=!<program>,..." directives to non-excluded images if they are located in a sandbox
-- added 'AlwaysCloseForBoxed=n' to disable this behaviour as it may not be always desired, and it doesn't provide extra security
- added process image information to SandMan UI
- localized template categories in the Plus UI [#727](https://github.com/sandboxie-plus/Sandboxie/issues/727)
- added "DisableResourceMonitor=y" to disable resource access monitor for selected boxes [#886](https://github.com/sandboxie-plus/Sandboxie/issues/886)
- added option to show trace entries only for the selected sandbox [#886](https://github.com/sandboxie-plus/Sandboxie/issues/886)
- added "UseVolumeSerialNumbers=y" that allows drive letters to be suffixed with the volume SN in the \drive\ sandbox location
-- it helps to avoid files mixed together on multiple pendrives using the same letter
-- Note: this option is not compatible with the recovery function of the Classic UI, only SandMan UI is fully compatible
- added "ForceRestart=PicoTorrent.exe" to the PicoTorrent template in order to fix a compatibility issue [#720](https://github.com/sandboxie-plus/Sandboxie/issues/720)
- added localization support for RPC templates (by isaak654) [#736](https://github.com/sandboxie-plus/Sandboxie/issues/736)
### Changed
- portable cleanup message now has yes/no/cancel options [#874](https://github.com/sandboxie-plus/Sandboxie/issues/874)
- consolidated Proc_CreateProcessInternalW and Proc_CreateProcessInternalW_RS5 to remove duplicate code
- the ElevateCreateProcess fix, as sometimes applied by the Program Compatibility Assistant, will no longer be emulated by default [#858](https://github.com/sandboxie-plus/Sandboxie/issues/858)
-- use 'ApplyElevateCreateProcessFix=y' or 'ApplyElevateCreateProcessFix=program.exe,y' to enable it
- trace log gets disabled only when it has no entries and the logging is stopped
### Fixed
- fixed APC issue with the new global hook emulation mechanism and WoW64 processes [#780](https://github.com/sandboxie-plus/Sandboxie/issues/780) [#779](https://github.com/sandboxie-plus/Sandboxie/issues/779)
- fixed IPv6 issues with BlockPort options
- fixed an issue with CheatEngine when "OpenWinClass=*" was specified [#786](https://github.com/sandboxie-plus/Sandboxie/issues/786)
- fixed memory corruption in SbieDrv [#838](https://github.com/sandboxie-plus/Sandboxie/issues/838)
- fixed crash issue with process elevation on CreateProcess calls [#858](https://github.com/sandboxie-plus/Sandboxie/issues/858)
- fixed process elevation when running in the built-in administrator account [#3](https://github.com/sandboxie-plus/Sandboxie/issues/3)
- fixed template preview resetting unsaved entries in box options window [#621](https://github.com/sandboxie-plus/Sandboxie/issues/621)
## [0.7.5 / 5.49.8] - 2021-06-05
### Added
- clipboard access for a sandbox can now be disabled with "OpenClipboard=n" [#794](https://github.com/sandboxie-plus/Sandboxie/issues/794)
### Changed
- now the OpenBluetooth template is enabled by default for compatibility with Unity games [#799](https://github.com/sandboxie-plus/Sandboxie/issues/799)
- "PreferExternalManifest=program.exe,y" can now be set on a per-process basis
### Fixed
- fixed compiler issues with the most recent VS2019 update
- fixed issue with Vivaldi browser [#821](https://github.com/sandboxie-plus/Sandboxie/issues/821)
- fixed some issues with box options in the Plus UI [#879](https://github.com/sandboxie-plus/Sandboxie/issues/879)
- fixed some issues with hardware acceleration in Chromium based browsers [#795](https://github.com/sandboxie-plus/Sandboxie/issues/795)
- the "Stop All" command now issues "KmdUtil scandll" first to solve issues when the SbieDll.dll is in use
- workaround for Electron apps, by forcing an additional command line argument on the GPU renderer process [#547](https://github.com/sandboxie-plus/Sandboxie/issues/547) [#310](https://github.com/sandboxie-plus/Sandboxie/issues/310) [#215](https://github.com/sandboxie-plus/Sandboxie/issues/215)
- fixed issue with Software Compatibility tab that doesn't always show template names correctly [#774](https://github.com/sandboxie-plus/Sandboxie/issues/774)
## [0.7.4 / 5.49.7] - 2021-04-11
### Added
- added option to disable file migration prompt in the Plus UI with PromptForFileMigration=n [#643](https://github.com/sandboxie-plus/Sandboxie/issues/643)
- added UI options for various security isolation features
- added missing functionality to set template values in the Plus UI
- added templates for Popcorn-Time, Clementine Music Player, Strawberry Music Player, 32-bit MPC-HC (by Dyras) [#726](https://github.com/sandboxie-plus/Sandboxie/pull/726) [#737](https://github.com/sandboxie-plus/Sandboxie/pull/737)
### Changed
- align default settings of AutoRecover and Favourites to the Plus version (thanks isaak654) [#747](https://github.com/sandboxie-plus/Sandboxie/pull/747)
- list of email clients and browsers is now centralized in Dll_GetImageType
- localstore.rdf reference in Templates.ini was replaced with xulstore.json (by isaak654) [#751](https://github.com/sandboxie-plus/Sandboxie/pull/751)
### Fixed
- fixed minor issue with logging internet blocks
- fixed issue with file recovery when located on a network share [#711](https://github.com/sandboxie-plus/Sandboxie/issues/711)
- fixed UI issue with CallTrace [#769](https://github.com/sandboxie-plus/Sandboxie/issues/769)
- fixed sandbox shortcuts receiving double extension upon creation [#770](https://github.com/sandboxie-plus/Sandboxie/issues/770)
- fixed misplaced labels in the Classic UI (thanks isaak654) [#759](https://github.com/sandboxie-plus/Sandboxie/pull/759)
- fixed separator line in SbieCtrl (thanks isaak654) [#761](https://github.com/sandboxie-plus/Sandboxie/pull/761)
- fixed broken paths in The Bat! template (by isaak654) [#756](https://github.com/sandboxie-plus/Sandboxie/pull/756)
- fixed issue about media players that attempt to write unneeded media files inside the box (by Dyras) [#743](https://github.com/sandboxie-plus/Sandboxie/pull/743) [#536](https://github.com/sandboxie-plus/Sandboxie/issues/536)
## [0.7.3 / 5.49.5] - 2021-03-27
### Added
- added "UseSbieWndStation=y" to emulate CreateDesktop for selected processes, not only Firefox and Chrome [#635](https://github.com/sandboxie-plus/Sandboxie/issues/635)
- added option to drop the console host process integrity, now you can use "DropConHostIntegrity=y" [#678](https://github.com/sandboxie-plus/Sandboxie/issues/678)
- added option to easily add local templates
- added new torrent clients and media players templates (by Dyras) [#719](https://github.com/sandboxie-plus/Sandboxie/pull/719)
### Changed
- reworked window hooking mechanism to improve performance [#697](https://github.com/sandboxie-plus/Sandboxie/issues/697) [#519](https://github.com/sandboxie-plus/Sandboxie/issues/519) [#662](https://github.com/sandboxie-plus/Sandboxie/issues/662) [#69](https://github.com/sandboxie-plus/Sandboxie/issues/69) [#109](https://github.com/sandboxie-plus/Sandboxie/issues/109) [#193](https://github.com/sandboxie-plus/Sandboxie/issues/193)
-- resolves issues with file save dialogs taking 30+ seconds to open
-- this fix greatly improves the win32 GUI performance of sandboxed processes
- reworked RPC resolver to be ini-configurable
-- the following options are now deprecated:
--- "UseRpcMgmtSetComTimeout=some.dll,n", so use "RpcPortBinding=some.dll,*,TimeOut=y"
--- "OpenUPnP=y", "OpenBluetooth=y", "OpenSmartCard=n", so use the new RPC templates instead
-- See Templates.ini for usage examples
### Fixed
- fixed process-specific hooks being applied to all processes in a given sandbox
- fixed issue with messages and templates sometimes not being properly displayed in the SandMan UI
- fixed issue with compatibility settings not being applied properly
- fixed auto delete issue that got introduced with 0.7.1 [#637](https://github.com/sandboxie-plus/Sandboxie/issues/637)
- fixed issue with NtSetInformationFile, FileDispositionInformation resulting in Opera installer failing
- fixed issue with MacType introduced in the 0.7.2 build [#676](https://github.com/sandboxie-plus/Sandboxie/issues/676)
- fixed global sandboxed windows hooks not working when window rename option is disabled
- fixed issue with saving local templates
- fixed issue when using runas to start a process that was created outside of the Sandboxie supervision [#688](https://github.com/sandboxie-plus/Sandboxie/issues/688)
-- since the runas facility is not accessible by default, this did not constitute a security issue
-- to enable runas functionality, add "OpenIpcPath=\RPC Control\SECLOGON" to your Sandboxie.ini
-- please take note that doing so may open other yet unknown issues
- fixed a driver compatibility issue with Windows 10 32 bit Insider Preview Build 21337
- fixed issues with driver signature for Windows 7
## [0.7.2 / 5.49.0] - 2021-03-04
### Added
- added option to alter reported Windows version "OverrideOsBuild=7601" for Windows 7 SP1 [#605](https://github.com/sandboxie-plus/Sandboxie/issues/605)
- the trace log can now be structured like a tree with processes as root items and threads as branches
### Changed
- SandboxieCrypto now always migrates the CatRoot2 files in order to prevent locking of real files
- greatly improved trace log performance
- MSI Server can now run with the "FakeAdminRights=y" and "DropAdminRights=y" options [#600](https://github.com/sandboxie-plus/Sandboxie/issues/600)
-- special service allowance for the MSI Server can be disabled with "MsiInstallerExemptions=n"
- changed SCM access check behaviour; non elevated users can now start services with a user token
-- elevation is now only required to start services with a system token
- reworked the trace log mechanism to be more verbose
- reworked RPC mechanism to be more flexible
### Fixed
- fixed issues with some installers introduced in 5.48.0 [#595](https://github.com/sandboxie-plus/Sandboxie/issues/595)
- fixed "add user to sandbox" in the Plus UI [#597](https://github.com/sandboxie-plus/Sandboxie/issues/597)
- FIXED SECURITY ISSUE: the HostInjectDll mechanism allowed for local privilege escalation (thanks hg421)
- Classic UI no longer allows to create a sandbox with an invalid or reserved device name [#649](https://github.com/sandboxie-plus/Sandboxie/issues/649)
## [0.7.1 / 5.48.5] - 2021-02-21
### Added
- enhanced RpcMgmtSetComTimeout handling with "UseRpcMgmtSetComTimeout=some.dll,n"
-- this option allows to specify if RpcMgmtSetComTimeout should be used or not for each individual dll
-- this setting takes precedence over hard-coded and per-process presets
-- "UseRpcMgmtSetComTimeout=some.dll" and "UseRpcMgmtSetComTimeout=some.dll,y" are equivalent
- added "FakeAdminRights=y" option that makes processes think they have admin permissions in a given box
-- this option is recommended to be used in combination with "DropAdminRights=y" to improve security
-- with "FakeAdminRights=y" and "DropAdminRights=y" installers should still work
- added RPC support for SSDP API (the Simple Service Discovery Protocol), you can enable it with "OpenUPnP=y"
### Changed
- SbieCrypto no longer triggers message 1313
- changed enum process API; now more than 511 processes per box can be enumerated (no limit)
- reorganized box settings a bit
- made COM tracing more verbose
- "RpcMgmtSetComTimeout=y" is now again the default behaviour, it seems to cause less issues overall
### Fixed
- fixed issues with webcam access when the DevCMApi filtering is in place
- fixed issue with free download manager for 'AppXDeploymentClient.dll', so RpcMgmtSetComTimeout=y will be used by default for this one [#573](https://github.com/sandboxie-plus/Sandboxie/issues/573)
- fixed not all WinRM files were blocked by the driver, with "BlockWinRM=n" this file block can be disabled
- fixed Sandboxie Classic crash when saving any option in Sandbox Settings -> Appearance (by typpos) [#586](https://github.com/sandboxie-plus/Sandboxie/issues/586)
## [0.7.0 / 5.48.0] - 2021-02-14
### Added
- sandboxed indicator for tray icons, the tooltip now contains [#] if enabled
- the trace log buffer can now be adjusted with "TraceBufferPages=2560"
-- the value denotes the count of 4K large pages to be used; here for a total of 10 MB
- new functionality for the list finder
### Changed
- improved RPC debugging
- improved IPC handling around RpcMgmtSetComTimeout; "RpcMgmtSetComTimeout=n" is now the default behaviour
-- required exceptions have been hard-coded for specific calling DLLs
- the LogApi dll is now using Sbie's tracing facility to log events instead of its own pipe server
### Fixed
- FIXED SECURITY ISSUE: elevated sandboxed processes could access volumes/disks for reading (thanks hg421)
-- this protection option can be disabled by using "AllowRawDiskRead=y"
- fixed crash issue around SetCurrentProcessExplicitAppUserModelID observed with GoogleUpdate.exe
- fixed issue with Resource Monitor sort by timestamp
- fixed invalid Opera bookmarks path (by isaak654) [#542](https://github.com/sandboxie-plus/Sandboxie/pull/542)
- FIXED SECURITY ISSUE: a race condition in the driver allowed to obtain an elevated rights handle to a process (thanks typpos) [#549](https://github.com/sandboxie-plus/Sandboxie/pull/549)
- FIXED SECURITY ISSUE: "\RPC Control\samss lpc" is now filtered by the driver (thanks hg421) [#553](https://github.com/sandboxie-plus/Sandboxie/issues/553)
-- this allowed elevated processes to change passwords, delete users and alike; to disable filtering use "OpenSamEndpoint=y"
- FIXED SECURITY ISSUE: "\Device\DeviceApi\CMApi" is now filtered by the driver (thanks hg421) [#552](https://github.com/sandboxie-plus/Sandboxie/issues/552)
-- this allowed elevated processes to change hardware configuration; to disable filtering use "OpenDevCMApi=y"
## [0.6.7 / 5.47.1] - 2021-02-01
### Added
- added UI language auto-detection
### Fixed
- fixed Brave.exe now being properly recognized as Chrome-, not Firefox-based
- fixed issue introduced in 0.6.5 with recent Edge builds
-- the 0.6.5 behaviour can be set on a per-process basis using "RpcMgmtSetComTimeout=POPPeeper.exe,n"
- fixed grouping issues [#445](https://github.com/sandboxie-plus/Sandboxie/issues/445)
- fixed main window restore state from tray [#288](https://github.com/sandboxie-plus/Sandboxie/issues/288)
## [0.6.5 / 5.47.0] - 2021-01-31
### Added
- added detection for Waterfox.exe, Palemoon.exe and Basilisk.exe Firefox forks as well as Brave.exe [#468](https://github.com/sandboxie-plus/Sandboxie/issues/468)
- added Bluetooth API support, IPC port can be opened with "OpenBluetooth=y" [#319](https://github.com/sandboxie-plus/Sandboxie/issues/319)
-- this should resolve issues with many Unity games hanging on startup for a long time
- added enhanced RPC/IPC interface tracing
- when DefaultBox is not found by the SandMan UI, it will be recreated
- "Disable Forced Programs" time is now saved and reloaded
### Changed
- reduced SandMan CPU usage
- Sandboxie.ini and Templates.ini can now be UTF8 encoded [#461](https://github.com/sandboxie-plus/Sandboxie/issues/461) [#197](https://github.com/sandboxie-plus/Sandboxie/issues/197)
-- this feature is experimental, files without a UTF-8 Signature should be recognized also
-- "ByteOrderMark=yes" is obsolete, Sandboxie.ini is now always saved with a BOM/Signature
- legacy language files can now be UTF8 encoded
- reworked file migration behaviour, removed hardcoded lists in favour of templates [#441](https://github.com/sandboxie-plus/Sandboxie/issues/441)
-- you can now use "CopyAlways=", "DontCopy=" and "CopyEmpty=" that support the same syntax as "OpenFilePath="
-- "CopyBlockDenyWrite=program.exe,y" makes a write open call to a file that won't be copied fail instead of turning it read-only
- removed hardcoded SkipHook list in favour of templates
### Fixed
- fixed old memory pool leak in the Sbie driver [#444](https://github.com/sandboxie-plus/Sandboxie/issues/444)
- fixed issue with item selection in the access restrictions UI
- fixed updater crash in SbieCtrl.exe [#450](https://github.com/sandboxie-plus/Sandboxie/issues/450)
- fixed issues with RPC calls introduced in Sbie 5.33.1
- fixed recently broken 'terminate all' command
- fixed a couple minor UI issues with SandMan UI
- fixed IPC issue with Windows 7 and 8 resulting in process termination
- fixed "recover to" functionality
## [0.6.0 / 5.46.5] - 2021-01-25
### Added
- added confirmation prompts to terminate all commands
- added window title to boxed process info [#360](https://github.com/sandboxie-plus/Sandboxie/issues/360)
- added WinSpy based sandboxed window finder [#351](https://github.com/sandboxie-plus/Sandboxie/issues/351)
- added option to view disabled boxes and double click on box to enable it
### Changed
- "Reset Columns" now resizes them to fit the content, and it can now be localized [#426](https://github.com/sandboxie-plus/Sandboxie/issues/426)
- modal windows are now centered to the parent [#417](https://github.com/sandboxie-plus/Sandboxie/issues/417)
- improved new box window [#417](https://github.com/sandboxie-plus/Sandboxie/issues/417)
### Fixed
- fixed issues with window modality [#409](https://github.com/sandboxie-plus/Sandboxie/issues/409)
- fixed issues when main window was set to be always on top [#417](https://github.com/sandboxie-plus/Sandboxie/issues/417)
- fixed a driver issue with Windows 10 insider build 21286
- fixed issues with snapshot dialog [#416](https://github.com/sandboxie-plus/Sandboxie/issues/416)
- fixed an issue when writing to a path that already exists in the snapshot but not outside [#415](https://github.com/sandboxie-plus/Sandboxie/issues/415)
## [0.5.5 / 5.46.4] - 2021-01-17
### Added
- added "SandboxService=..." to force selected services to be started in the sandbox
- added template clean-up functionality to Plus UI
- added internet prompt to now also allow internet access permanently
- added browse button for box root folder in the SandMan UI [#382](https://github.com/sandboxie-plus/Sandboxie/issues/382)
- added explorer info message [#352](https://github.com/sandboxie-plus/Sandboxie/issues/352)
- added option to keep the SandMan UI always on top
- allow drag and drop file onto SandMan.exe to run it sandboxed [#355](https://github.com/sandboxie-plus/Sandboxie/issues/355)
- added start SandMan UI when a sandboxed application starts [#367](https://github.com/sandboxie-plus/Sandboxie/issues/367)
- recovery window can now list all files
- added file counter to recovery window
- when "NoAddProcessToJob=y" is specified, Chrome and related browsers now can fully use the job system
-- Note: "NoAddProcessToJob=y" reduces the box isolation, but the affected functions are mostly covered by UIPI anyway
- added optimized default column widths to Sbie view
- added template support for Yandex and Ungoogled Chromium browsers (by isaak654)
### Changed
- updated templates with multiple browsers fixes (thanks isaak654)
- when trying to take a snapshot of an empty sandbox a proper error message is displayed [#381](https://github.com/sandboxie-plus/Sandboxie/issues/381)
- new layout for the recovery window
- Sbie view sorting is now case insensitive
### Fixed
- fixed issue child window closing terminating application when main was hidden [#349](https://github.com/sandboxie-plus/Sandboxie/issues/349)
- fixed issues with non modal windows [#349](https://github.com/sandboxie-plus/Sandboxie/issues/349)
- fixed issues connecting to driver in portable mode
- fixed minor issues with snapshot window
- fixed missing error message when attempting to create an already existing sandbox [#359](https://github.com/sandboxie-plus/Sandboxie/issues/359)
- fixed issue allowing to save setting when a sandbox was already deleted [#359](https://github.com/sandboxie-plus/Sandboxie/issues/359)
- fixed issues with disabled items in dark mode [#359](https://github.com/sandboxie-plus/Sandboxie/issues/359)
- fixed some dialogs not closing when pressing Esc [#359](https://github.com/sandboxie-plus/Sandboxie/issues/359)
- fixed tab stops on many windows
## [0.5.4d / 5.46.3] - 2021-01-11
### Changed
- improved access tracing, removed redundant entries
- OpenIpcPath=\BaseNamedObjects\[CoreUI]-* is now hardcoded in the driver no need for the template entry
- WindowsFontCache is now open by default
- refactored some IPC code in the driver
### Fixed
- FIXED SECURITY ISSUE: the registry isolation could be bypassed, present since Windows 10 Creators Update
- fixed creation time not always being properly updated in the SandMan UI
## [0.5.4c / 5.46.2] - 2021-01-10
### Added
- added "CallTrace=*" to log all system calls to the access log
### Changed
- improved IPC logging code
- improved MSG_2101 logging
### Fixed
- fixed more issues with IPC tracing
- fixed SBIE2101 issue with Chrome and derivatives
## [0.5.4b / 5.46.1] - 2021-01-08
### Added
- added "RunServiceAsSystem=..." allows specific named services to be run as system
### Changed
- refactored some code around SCM access
### Fixed
- fixed a crash issue in SbieSvc.exe introduced with the last build
- fixed issue with SandMan UI update check
- FIXED SECURITY ISSUE: a Sandboxed process could start sandboxed as system even with DropAdminRights in place
### Removed
- removed "ProtectRpcSs=y" due to incompatibility with new isolation defaults
## [0.5.4 / 5.46.0] - 2021-01-06
### Added
- FIXED SECURITY ISSUE: Sandboxie now strips particularly problematic privileges from sandboxed system tokens
-- with those a process could attempt to bypass the sandbox isolation (thanks Diversenok)
-- old legacy behaviour can be enabled with "StripSystemPrivileges=n" (absolutely NOT Recommended)
- added new isolation options "ClosePrintSpooler=y" and "OpenSmartCard=n"
-- those resources are open by default, but for a hardened box it is desired to close them
- FIXED SECURITY ISSUE: added print spooler filter to prevent printers from being set up outside the sandbox
-- the filter can be disabled with "OpenPrintSpooler=y"
- added overwrite prompt when recovering an already existing file
- added "StartProgram=", "StartService=" and "AutoExec=" options to the SandMan UI
- added more compatibility templates (thanks isaak654) [#294](https://github.com/sandboxie-plus/Sandboxie/pull/294)
### Changed
- Changed Emulated SCM behaviour, boxed services are no longer by default started as boxed system
-- use "RunServicesAsSystem=y" to enable the old legacy behaviour
-- Note: sandboxed services with a system token are still sandboxed and restricted
-- However not granting them a system token in the first place removes possible exploit vectors
-- Note: this option is not compatible with "ProtectRpcSs=y" and takes precedence!
- reworked dynamic IPC port handling
- improved Resource Monitor status strings
### Fixed
- FIXED SECURITY ISSUE: processes could spawn processes outside the sandbox (thanks Diversenok)
- FIXED SECURITY ISSUE: bug in the dynamic IPC port handling allowed to bypass IPC isolation
- fixed issue with IPC tracing
- FIXED SECURITY ISSUE: CVE-2019-13502 "\RPC Control\LSARPC_ENDPOINT" is now filtered by the driver (thanks Diversenok)
-- this allowed some system options to be changed, to disable filtering use "OpenLsaEndpoint=y"
- fixed hooking issues SBIE2303 with Chrome, Edge and possibly others [#68](https://github.com/sandboxie-plus/Sandboxie/issues/68) [#166](https://github.com/sandboxie-plus/Sandboxie/issues/166)
- fixed failed check for running processes when performing snapshot operations
- fixed some box option checkboxes were not properly initialized
- fixed unavailable options are not properly disabled when SandMan is not connected to the driver
- fixed MSI installer issue, not being able to create "C:\Config.msi" folder on Windows 20H2 [#219](https://github.com/sandboxie-plus/Sandboxie/issues/219)
- added missing localization to generic list commands
- fixed issue with "iconcache_*" when running sandboxed explorer
- fixed more issues with groups
## [0.5.3b / 5.45.2] - 2021-01-02
### Added
- added settings for the portable boxed root folder option
- added process name to resource log
- added command line column to the process view in the SandMan UI
### Fixed
- fixed a few issues with group handling [#262](https://github.com/sandboxie-plus/Sandboxie/issues/262)
- fixed issue with GetRawInputDeviceInfo when running a 32 bit program on a 64 bit system
- fixed issue when pressing apply in the "Resource Access" tab; the last edited value was not always applied
- fixed issue merging entries in Resource Access Monitor
## [0.5.3a / 5.45.2] - 2020-12-29
### Added
- added prompt to choose if links in the SandMan UI should be opened in a sandboxed or unsandboxed browser [#273](https://github.com/sandboxie-plus/Sandboxie/issues/273)
- added more recovery options
- added "ClosedClsid=" to block COM objects from being used when they cause compatibility issues
- added "ClsidTrace=*" option to trace COM usage
- added "ClosedRT=" option to block access to problematic Windows RT interfaces
- added option to make a link for any selected process to SandMan UI
- added option to reset all hidden messages
- added more process presets "force program" and "allow internet access"
- added "SpecialImage=chrome,some_electron_app.exe" option to Sandboxie.ini, valid image types "chrome", "firefox"
-- with this option you can enable special hardcoded workarounds to new obscure forks of those browsers
- added German translation (thanks bastik-1001) to the SandMan UI
- added Russian translation (thanks lufog) to the SandMan UI
- added Portuguese translation (thanks JNylson ) to the SandMan UI
### Changed
- changed docs and update URLs to the new sandboxie-plus.com domain
- greatly improved the setup script (thanks mpheath)
- "OpenClsid=" and "ClosedClsid=" now support specifying a program or group name
- by default, when started in portable mode, the sandbox folder will be located in the parent directory of the Sandboxie instance
### Fixed
- grouping menu not fully working in the new SandMan UI [#277](https://github.com/sandboxie-plus/Sandboxie/issues/277)
- fixed not being able to set quick recovery in SandMan UI
- fixed resource leak when loading process icons in SandMan UI
- fixed issue with OpenToken debug options
- fixed Chrome crashing on websites that cause the invocation of "FindAppUriHandlersAsync" [#198](https://github.com/sandboxie-plus/Sandboxie/issues/198)
- fixed issue connecting to the driver when starting in portable mode
- fixed missing template setup when creating new boxes
### removed
- removed obsolete "OpenDefaultClsid=n" use "ClosedClsid=" with the appropriate values instead
- removed suspend/resume menu entry, pooling that state wastes substantial CPU cycles; use task explorer for that functionality
## [0.5.2a / 5.45.1] - 2020-12-23
### Fixed
- fixed translation support in the SandMan UI
- fixed sandboxed explorer issue [#289](https://github.com/sandboxie-plus/Sandboxie/issues/289)
- fixed simplified Chinese localization
## [0.5.2 / 5.45.1] - 2020-12-23
### Added
- added advanced new box creation dialog to SandMan UI
- added show/hide tray context menu entry
- added refresh button to file recovery dialog
- added mechanism to load icons from {install-dir}/Icons/{icon}.png for UI customization
- added tray indicator to show disabled forced program status in the SandMan UI
- added program name suggestions to box options in SandMan UI
- added saving of column sizes in the options window
### Changed
- reorganized the advanced box options a bit
- changed icons (thanks Valinwolf for picking the new ones) [#235](https://github.com/sandboxie-plus/Sandboxie/issues/235)
- updated Templates.ini (thanks isaak654) [#256](https://github.com/sandboxie-plus/Sandboxie/pull/256) [#258](https://github.com/sandboxie-plus/Sandboxie/pull/258)
- increased max value for disable forced process time in SandMan UI
### Fixed
- fixed BSOD introduced in 5.45.0 when using Windows 10 "core isolation" [#221](https://github.com/sandboxie-plus/Sandboxie/issues/221)
- fixed minor issue with lingering/leader processes
- fixed menu issue in SandMan UI
- fixed issue with stop behaviour page in SandMan UI
- fixed issue with Plus installer not displaying KmdUtil window
- fixed SandMan UI saving UI settings on Windows shutdown
- fixed issue with Plus installer autorun [#247](https://github.com/sandboxie-plus/Sandboxie/issues/247)
- fixed issue with legacy installer not removing all files
- fixed a driver compatibility issue with Windows 20H1 and later [#228](https://github.com/sandboxie-plus/Sandboxie/issues/228)
-- this solves "stop pending", LINE messenger hanging and other issues...
- fixed quick recovery issue in SbieCtrl.exe introduced in 5.45.0 [#224](https://github.com/sandboxie-plus/Sandboxie/issues/224)
- fixed issue advanced hide process settings not saving
- fixed some typos in the UI (thanks isaak654) [#252](https://github.com/sandboxie-plus/Sandboxie/pull/252) [#253](https://github.com/sandboxie-plus/Sandboxie/pull/253) [#254](https://github.com/sandboxie-plus/Sandboxie/pull/254)
- fixed issue with GetRawInputDeviceInfo failing when boxed processes are put in a job object [#176](https://github.com/sandboxie-plus/Sandboxie/issues/176) [#233](https://github.com/sandboxie-plus/Sandboxie/issues/233)
-- this fix resolves issues with CP2077 and other games not getting keyboard input (thanks Rostok)
- fixed failing ClipCursor won't longer span the message log
- fixed issue with adding recovery folders in SandMan UI
- fixed issue with Office 2019 template when using a non-default Sbie install location
- fixed issue setting last access attribute on sandboxed folders [#218](https://github.com/sandboxie-plus/Sandboxie/issues/218)
- fixed issue with process start signal
## [0.5.1 / 5.45.0] - 2020-12-12
### Added
- added simple view mode
### Changed
- updated SandMan UI to use Qt5.15.1
### Fixed
- fixed crash issue with progress dialog
- fixed progress dialog cancel button not working for update checker
- fixed issue around NtQueryDirectoryFile when deleting sandbox content
- fixed dark theme in the notification window
- fixed issue with disable force programs tray menu
## [0.5.0 / 5.45.0] - 2020-12-06
### Added
- added new notification window
- added user interactive control mechanism when using the new SandMan UI
-- when a file exceeds the copy limit instead of failing, the user is prompted if the file should be copied or not
-- when internet access is blocked it now can be exempted in real time by the user
- added missing file recovery and auto/quick recovery functionality [#188](https://github.com/sandboxie-plus/Sandboxie/issues/188) [#178](https://github.com/sandboxie-plus/Sandboxie/issues/178)
- added silent MSG_1399 boxed process start notification to keep track of short lived boxed processes
- added ability to prevent system wide process starts, Sandboxie can now instead of just alerting also block processed on the alert list
-- set "StartRunAlertDenied=y" to enable process blocking
- the process start alert/block mechanism can now also handle folders use "AlertFolder=..."
- added ability to merge snapshots [#151](https://github.com/sandboxie-plus/Sandboxie/issues/151)
- added icons to the sandbox context menu in the new UI
- added more advanced options to the sandbox options window
- added file migration progress indicator
- added more run commands and custom run commands per sandbox
-- the box settings users can now specify programs to be available from the box run menu
-- also processes can be pinned to that list from the presets menu
- added more Windows 10 specific template presets
- added ability to create desktop shortcuts to sandboxed items
- added icons to box option tabs
- added box grouping
- added new debug option "DebugTrace=y" to log debug output to the trace log
- added check for updates to the new SandMan UI
- added check for updates to the legacy SbieCtrl UI
### Changed
- File migration limit can now be disabled by specifying "CopyLimitKb=-1" [#526](https://github.com/sandboxie-plus/Sandboxie/issues/526)
- improved and refactored message logging mechanism, reducing memory usage by factor of 2
- terminated boxed processes are now kept listed for a couple of seconds
- reworked sandbox deletion mechanism of the new UI
- restructured sandbox options window
- SbieDLL.dll can now be compiled with an up to date ntdll.lib (Thanks to TechLord from Team-IRA for help)
- improved automated driver self repair
### Fixed
- fixed issues migrating files > 4GB
- fixed an issue that would allow a malicious application to bypass the internet blockade
- fixed issue when logging messages from a non-sandboxed process, added process_id parameter to API_LOG_MESSAGE_ARGS
- fixed issues with localization
- fixed issue using file recovery in legacy UI SbieCtrl.exe when "SeparateUserFolders=n" is set
- when a program is blocked from starting due to restrictions no redundant messages are issues anymore
- fixed UI not properly displaying async errors
- fixed issues when a snapshot operation failed
- fixed some special cases of IpcPath and WinClass in the new UI
- fixed driver issues with WHQL passing compatibility testing
- fixed issues with Classic installer
## [0.4.5 / 5.44.1] - 2020-11-16
### Added
- added "Terminate all processes" and "disable forced programs" commands to tray menu in SandMan UI
- program start restrictions settings now can be switched between a white list and a black list
-- programs can be terminated and blacklisted from the context menu
- added additional process context menu options, lingering and leader process can be now set from menu
- added option to view template presets for any given box
- added text filter to template view
- added new compatibility templates:
-- Windows 10 core UI component: OpenIpcPath=\BaseNamedObjects\[CoreUI]-* solving issues with Chinese Input and Emojis [#120](https://github.com/sandboxie-plus/Sandboxie/issues/120) [#88](https://github.com/sandboxie-plus/Sandboxie/issues/88)
-- Firefox Quantum, access to Windows FontCachePort for compatibility with Windows 7
- added experimental debug option "OriginalToken=y" which lets sandboxed processes retain their original unrestricted token
-- This option is comparable with "OpenToken=y" and is intended only for testing and debugging, it BREAKS most SECURITY guarantees (!)
- added debug option "NoSandboxieDesktop=y" it disables the desktop proxy mechanism
-- Note: without an unrestricted token with this option applications won't be able to start
- added debug option "NoSysCallHooks=y" it disables the sys call processing by the driver
-- Note: without an unrestricted token with this option applications won't be able to start
- added ability to record verbose access traces to the Resource Monitor
-- use ini options "FileTrace=*", "PipeTrace=*", "KeyTrace=*", "IpcTrace=*", "GuiTrace=*" to record all events
-- replace "*" to log only: "A" - allowed, "D" - denied, or "I" - ignore events
- added ability to record debug output strings to the Resource Monitor
-- use ini option DebugTrace=y to enable
### Changed
- AppUserModelID sting no longer contains Sandboxie version string
- now by default Sbie's application manifest hack is disabled, as it causes problems with version checking on Windows 10
-- to enable old behaviour add "PreferExternalManifest=y" to the global or the box specific ini section
- the resource log mechanism can now handle multiple strings to reduce on string copy operations
### Fixed
- fixed issue with disabling some restriction settings failed
- fixed disabling of internet block from the presets menu sometimes failed
- the software compatibility list in the SandMan UI now shows the proper template names
- fixed use of freed memory in the driver
- replaced swprintf with snwprintf to prevent potential buffer overflow in SbieDll.dll
- fixed bad list performance with resource log and API log in SandMan UI
## [0.4.4 / 5.44.0] - 2020-11-03
### Added
- added SbieLdr (experimental)
### Changed
- moved code injection mechanism from SbieSvc to SbieDll
- moved function hooking mechanism from SbieDrv to SbieDll
- introduced a new driverless method to resolve wow64 ntdll base address
### removed
- removed support for Windows Vista x64
## [0.4.3 / 5.43.7] - 2020-11-03
### Added
- added disable forced programs menu command to the SandMan UI
### Fixed
- fixed file rename bug introduced with an earlier Driver Verifier fix [#174](https://github.com/sandboxie-plus/Sandboxie/issues/174) [#153](https://github.com/sandboxie-plus/Sandboxie/issues/153)
- fixed issue saving access lists
- fixed issue with program groups parsing in the SandMan UI
- fixed issue with internet access restriction options [#177](https://github.com/sandboxie-plus/Sandboxie/issues/177) [#185](https://github.com/sandboxie-plus/Sandboxie/issues/185)
- fixed issue deleting sandbox when located on a drive directly [#139](https://github.com/sandboxie-plus/Sandboxie/issues/139)
## [0.4.2 / 5.43.6] - 2020-10-10
### Added
- added explore box content menu option
### Fixed
- fixed thread handle leak in SbieSvc and other components [#144](https://github.com/sandboxie-plus/Sandboxie/issues/144)
- msedge.exe is now categorized as a Chromium derivate
- fixed Chrome 86+ compatibility bug with Chrome's own sandbox [#149](https://github.com/sandboxie-plus/Sandboxie/issues/149)
## [0.4.1 / 5.43.5] - 2020-09-12
### Added
- added core version compatibility check to SandMan UI
- added shell integration options to SbiePlus
### Changed
- SbieCtrl does not longer auto show the tutorial on first start
- when hooking to the trampoline, the migrated section of the original function is no longer noped out
-- it caused issues with unity games, will be investigated and re-enabled later
### Fixed
- fixed colour issue with vertical tabs in dark mode
- fixed wrong path separators when adding new forced folders
- fixed directory listing bug introduced in 5.43
- fixed issues with settings window when not being connected to driver
- fixed issue when starting SandMan UI as admin
- fixed auto content delete not working with SandMan UI
## [0.4.0 / 5.43] - 2020-09-05
### Added
- added a proper custom installer to the Plus release
- added sandbox snapshot functionality to Sbie core
-- filesystem is saved incrementally, the snapshots built upon each other
-- each snapshot gets a full copy of the box registry for now
-- each snapshot can have multiple children snapshots
- added access status to Resource Monitor
- added setting to change border width [#113](https://github.com/sandboxie-plus/Sandboxie/issues/113)
- added snapshot manager UI to SandMan
- added template to enable authentication with an Yubikey or comparable 2FA device
- added UI for program alert
- added software compatibility options to the UI
### Changed
- SandMan UI now handles deletion of sandbox content on its own
- no longer adding redundant resource accesses as new events
### Fixed
- fixed issues when hooking functions from delay loaded libraries
- fixed issues when hooking an already hooked function
- fixed issues with the new box settings editor
### Removed
- removes deprecated workaround in the hooking mechanism for an obsolete anti-malware product
## [0.3.5 / 5.42.1] - 2020-07-19
### Added
- added settings window
- added translation support
- added dark theme
- added auto start option
- added sandbox options
- added debug option "NoAddProcessToJob=y"
### Changed
- improved empty sandbox tray icon
- improved message parsing
- updated homepage links
### Fixed
- fixed ini issue with SandMan.exe when renaming sandboxes
- fixed ini auto reload bug introduced in the last build
- fixed issue when hooking delayed loaded libraries
## [0.3 / 5.42] - 2020-07-04
### Added
- API_QUERY_PROCESS_INFO can be now used to get the original process token of sandboxed processes
-- Note: this capability is used by TaskExplorer to allow inspecting sandbox internal tokens
- added option "KeepTokenIntegrity=y" to make the Sbie token keep its initial integrity level (debug option)
-- Note: Do NOT USE Debug Options if you don't know their security implications (!)
- added process id to log messages very useful for debugging
- added finder to resource log
- added option to hide host processes "HideHostProcess=[name]"
-- Note: Sbie hides by default processes from other boxes, this behaviour can now be controlled with "HideOtherBoxes=n"
- Sandboxed RpcSs and DcomLaunch can now be run as system with the option "ProtectRpcSs=y" however this breaks sandboxed explorer and other
- Built In Clsid whitelist can now be disabled with "OpenDefaultClsid=n"
- Processes can be now terminated with the del key, and require a confirmation
- added sandboxed window border display to SandMan.exe
- added notification for Sbie log messages
- added Sandbox Presets sub menu allowing to quickly change some settings
-- Enable/Disable API logging, logapi_dll's are now distributed with SbiePlus
-- And other: Drop admin rights; Block/Allow internet access; Block/Allow access to files on the network
- added more info to the sandbox status column
- added path column to SbieModel
- added info tooltips in SbieView
### Changed
- reworked ApiLog, added PID and PID filter
- auto config reload on in change is now delayed by 500ms to not reload multiple times on incremental changes
- Sandbox names now replace "_" with " " for display allowing to use names that are made of separated words
### Fixed
- added missing PreferExternalManifest initialization to portable mode
- FIXED SECURITY ISSUE: fixed permission issues with sandboxed system processes
-- Note: you can use "ExposeBoxedSystem=y" for the old behaviour (debug option)
- FIXED SECURITY ISSUE: fixed missing SCM access check for sandboxed services (thanks Diversenok)
-- Note: to disable the access check use "UnrestrictedSCM=y" (debug option)
- fixed missing initialization in service server that caused sandboxed programs to crash when querying service status
- fixed many bugs that caused the SbieDrv.sys to BSOD when running with Driver Verifier enabled [#57](https://github.com/sandboxie-plus/Sandboxie/issues/57)
-- 0xF6 in GetThreadTokenOwnerPid and File_Api_Rename
-- missing non optional parameter for FltGetFileNameInformation in File_PreOperation
-- 0xE3 in Key_StoreValue and Key_PreDataInject
## [0.2.2 / 5.41.2] - 2020-06-19
### Added
- added option SeparateUserFolders=n to no longer have the user profile files stored separately in the sandbox
- added SandboxieLogon=y it makes processes run under the SID of the "Sandboxie" user instead of the Anonymous user
-- Note: the global option AllowSandboxieLogon=y must be enabled, the "Sandboxie" user account must be manually created first and the driver reloaded, else process start will fail
- improved debugging around process creation errors in the driver
### Fixed
- fixed some log messages going lost after driver reload
- found a workable fix for the MSI installer issue, see Proc_CreateProcessInternalW_RS5
## [0.2.1 / 5.41.1] - 2020-06-18
### Added
- added different sandbox icons for different types
-- Red LogAPI/BSA enabled
-- more to come :D
- added progress window for async operations that take time
- added DPI awareness [#56](https://github.com/sandboxie-plus/Sandboxie/issues/56)
- the driver file is now obfuscated to avoid false positives
- additional debug options to Sandboxie.ini OpenToken=y that combines UnrestrictedToken=y and UnfilteredToken=y
-- Note: using these options weakens the sandboxing, they are intended for debugging and may be used for better application virtualization later
### Changed
- SbieDll.dll when processing InjectDll now looks in the SbieHome folder for the DLLs if the entered path starts with a backslash
-- i.e. "InjectDll=\LogAPI\i386\logapi32v.dll" or "InjectDll64=\LogAPI\amd64\logapi64v.dll"
### Fixed
- IniWatcher did not work in portable mode
- service path fix broke other services, now properly fixed, maybe
- found workaround for the MSI installer issue
## [0.2 / 5.41.0] - 2020-06-08
### Added
- IniWatcher, no more clicking reload, the ini is now reloaded automatically every time it changes
- added Maintenance menu to the Sandbox menu, allowing to install/uninstall and start/stop Sandboxie driver, service
- SandMan.exe now is packed with Sbie files and when no Sbie is installed acts as a portable installation
- added option to clean up logs
### Changed
- Sbie driver now first checks the home path for the Sbie ini before checking SystemRoot
### Fixed
- FIXED SECURITY ISSUE: sandboxed processes could obtain a write handle on non sandboxed processes (thanks Diversenok)
-- this allowed to inject code in non sandboxed processes
- fixed issue boxed services not starting when the path contained a space
- NtQueryInformationProcess now returns the proper sandboxed path for sandboxed processes
## [0.1 / 5.40.2] - 2020-06-01
### Added
- created a new Qt based UI names SandMan (Sandboxie Manager)
- Resource Monitor now shows the PID
- added basic API call log using updated BSA LogApiDll
### Changed
- reworked Resource Monitor to work with multiple event consumers
- reworked log to work with multiple event consumers
## [5.40.1] - 2020-04-10
### Added
- "Other" type for the Resource Access Monitor
-- added call to StartService to the logged Resources
### Fixed
- fixed "Windows Installer Service could not be accessed" that got introduced with Windows 1903