2017-05-13 12:02:10 +01:00
/*
user_config . h - user specific configuration for Sonoff - Tasmota
2017-12-22 13:55:24 +00:00
Copyright ( C ) 2018 Theo Arends
2017-05-13 12:02:10 +01:00
This program is free software : you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation , either version 3 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
2017-10-18 17:22:34 +01:00
# ifndef _USER_CONFIG_H_
# define _USER_CONFIG_H_
2017-01-28 13:41:01 +00:00
/*********************************************************************************************\
2018-04-05 14:26:16 +01:00
* This file consists of TWO sections .
2017-01-28 13:41:01 +00:00
*
2018-04-05 14:26:16 +01:00
* SECTION 1 :
* The first section contains PARAMETERS overriding flash settings if define CFG_HOLDER is CHANGED .
* All parameters can be persistent changed online using commands via MQTT , WebConsole or Serial .
* Corresponding MQTT / Serial / Console commands are shown in [ brackets ]
*
* SECTION 2 :
* The second section contains Enabled and Disabled FEATURES allowing different program size .
* Changes in this section do NOT need a change of define CFG_HOLDER .
*
* ATTENTION :
2018-04-05 15:13:17 +01:00
* Users are advised to use the user_config_override . h file for most changes .
2017-01-28 13:41:01 +00:00
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2018-04-05 14:26:16 +01:00
//#define USE_CONFIG_OVERRIDE // Uncomment to use user_config_override.h file. See README.md
2017-09-02 13:37:02 +01:00
2018-04-05 14:26:16 +01:00
/*********************************************************************************************\
* SECTION 1
2018-04-05 15:13:17 +01:00
* - After initial load any change here only take effect if CFG_HOLDER is changed too
2018-04-05 14:26:16 +01:00
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2017-01-28 13:41:01 +00:00
2018-04-05 14:26:16 +01:00
// -- Master parameter control --------------------
2018-07-06 17:00:50 +01:00
# define CFG_HOLDER 4617 // [Reset 1] Change this value (max 32000) to load SECTION1 configuration parameters to flash
2018-04-02 10:24:36 +01:00
2018-04-05 14:26:16 +01:00
// -- Project -------------------------------------
# define PROJECT "sonoff" // PROJECT is used as the default topic delimiter
2018-06-05 22:54:35 +01:00
# define MODULE SONOFF_BASIC // [Module] Select default model from sonoff_template.h (Should not be changed)
2018-04-02 10:24:36 +01:00
2017-01-28 13:41:01 +00:00
# define SAVE_DATA 1 // [SaveData] Save changed parameters to Flash (0 = disable, 1 - 3600 seconds)
2017-07-30 16:55:37 +01:00
# define SAVE_STATE 1 // [SetOption0] Save changed power state to Flash (0 = disable, 1 = enable)
2017-01-28 13:41:01 +00:00
// -- Wifi ----------------------------------------
2017-03-29 17:42:05 +01:00
# define WIFI_IP_ADDRESS "0.0.0.0" // [IpAddress1] Set to 0.0.0.0 for using DHCP or IP address
2018-06-05 22:54:35 +01:00
# define WIFI_GATEWAY "192.168.2.254" // [IpAddress2] If not using DHCP set Gateway IP address
2017-03-29 17:42:05 +01:00
# define WIFI_SUBNETMASK "255.255.255.0" // [IpAddress3] If not using DHCP set Network mask
2018-06-05 22:54:35 +01:00
# define WIFI_DNS "192.168.2.27" // [IpAddress4] If not using DHCP set DNS IP address (might be equal to WIFI_GATEWAY)
2017-03-25 16:24:11 +00:00
2018-02-10 14:13:27 +00:00
# define STA_SSID1 "" // [Ssid1] Wifi SSID
# define STA_PASS1 "" // [Password1] Wifi password
# define STA_SSID2 "" // [Ssid2] Optional alternate AP Wifi SSID
# define STA_PASS2 "" // [Password2] Optional alternate AP Wifi password
2018-07-15 14:21:48 +01:00
# define WIFI_CONFIG_TOOL WIFI_WAIT // [WifiConfig] Default tool if wifi fails to connect
// (WIFI_RESTART, WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_RETRY, WIFI_WAIT, WIFI_SERIAL)
2018-07-15 16:30:38 +01:00
# define WIFI_CONFIG_NO_SSID WIFI_WPSCONFIG // Default tool if wifi fails to connect and no SSID is configured
2018-07-15 14:21:48 +01:00
// (WIFI_SMARTCONFIG, WIFI_MANAGER, WIFI_WPSCONFIG, WIFI_SERIAL)
2018-07-14 14:35:56 +01:00
// *** NOTE: When WPS is disabled by USE_WPS below, WIFI_WPSCONFIG will execute WIFI_MANAGER ***
2018-07-15 14:21:48 +01:00
// *** NOTE: When WIFI_MANAGER is disabled by USE_WEBSERVER below, WIFI_MANAGER will execute WIFI_SMARTCONFIG ***
// *** NOTE: When WIFI_SMARTCONFIG is disabled by USE_SMARTCONFIG below, WIFI_SMARTCONFIG will execute WIFI_SERIAL ***
2017-09-02 13:37:02 +01:00
2017-01-28 13:41:01 +00:00
// -- Syslog --------------------------------------
2018-02-10 14:13:27 +00:00
# define SYS_LOG_HOST "" // [LogHost] (Linux) syslog host
2017-01-28 13:41:01 +00:00
# define SYS_LOG_PORT 514 // [LogPort] default syslog UDP port
2018-04-12 13:01:43 +01:00
# define SYS_LOG_LEVEL LOG_LEVEL_NONE // [SysLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)
# define SERIAL_LOG_LEVEL LOG_LEVEL_INFO // [SerialLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)
# define WEB_LOG_LEVEL LOG_LEVEL_INFO // [WebLog] (LOG_LEVEL_NONE, LOG_LEVEL_ERROR, LOG_LEVEL_INFO, LOG_LEVEL_DEBUG, LOG_LEVEL_DEBUG_MORE)
2017-01-28 13:41:01 +00:00
// -- Ota -----------------------------------------
2018-05-02 09:15:50 +01:00
# define OTA_URL "http: //sonoff.maddox.co.uk/tasmota/sonoff.bin" // [OtaUrl]
2018-03-02 14:38:37 +00:00
2017-01-28 13:41:01 +00:00
// -- MQTT ----------------------------------------
2017-07-30 16:55:37 +01:00
# define MQTT_USE 1 // [SetOption3] Select default MQTT use (0 = Off, 1 = On)
2018-03-02 14:38:37 +00:00
2018-04-05 14:26:16 +01:00
# define MQTT_HOST "" // [MqttHost]
# define MQTT_FINGERPRINT1 "A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07" // [MqttFingerprint1]
# define MQTT_FINGERPRINT2 "A5 02 FF 13 99 9F 8B 39 8E F1 83 4F 11 23 65 0B 32 36 FC 07" // [MqttFingerprint2]
# define MQTT_PORT 1883 // [MqttPort] MQTT port (10123 on CloudMQTT)
# define MQTT_USER "DVES_USER" // [MqttUser] MQTT user
# define MQTT_PASS "DVES_PASS" // [MqttPassword] MQTT password
2017-01-28 13:41:01 +00:00
# define MQTT_BUTTON_RETAIN 0 // [ButtonRetain] Button may send retain flag (0 = off, 1 = on)
# define MQTT_POWER_RETAIN 0 // [PowerRetain] Power status message may send retain flag (0 = off, 1 = on)
# define MQTT_SWITCH_RETAIN 0 // [SwitchRetain] Switch may send retain flag (0 = off, 1 = on)
2017-03-29 17:42:05 +01:00
# define MQTT_STATUS_OFF "OFF" // [StateText1] Command or Status result when turned off (needs to be a string like "0" or "Off")
# define MQTT_STATUS_ON "ON" // [StateText2] Command or Status result when turned on (needs to be a string like "1" or "On")
# define MQTT_CMND_TOGGLE "TOGGLE" // [StateText3] Command to send when toggling (needs to be a string like "2" or "Toggle")
2017-06-06 22:23:23 +01:00
# define MQTT_CMND_HOLD "HOLD" // [StateText4] Command to send when button is kept down for over KEY_HOLD_TIME * 0.1 seconds (needs to be a string like "HOLD")
2017-01-28 13:41:01 +00:00
2017-05-08 12:21:45 +01:00
// -- MQTT topics ---------------------------------
2018-04-05 14:26:16 +01:00
// Example "tasmota/bedroom/%topic%/%prefix%/" up to 80 characers
2017-05-08 12:21:45 +01:00
# define MQTT_FULLTOPIC "%prefix% / %topic% / " // [FullTopic] Subscribe and Publish full topic name - Legacy topic
// %prefix% token options
# define SUB_PREFIX "cmnd" // [Prefix1] Sonoff devices subscribe to %prefix%/%topic% being SUB_PREFIX/MQTT_TOPIC and SUB_PREFIX/MQTT_GRPTOPIC
# define PUB_PREFIX "stat" // [Prefix2] Sonoff devices publish to %prefix%/%topic% being PUB_PREFIX/MQTT_TOPIC
# define PUB_PREFIX2 "tele" // [Prefix3] Sonoff devices publish telemetry data to %prefix%/%topic% being PUB_PREFIX2/MQTT_TOPIC/UPTIME, POWER and TIME
// May be named the same as PUB_PREFIX
// %topic% token options (also ButtonTopic and SwitchTopic)
2018-08-05 19:01:50 +01:00
# define MQTT_TOPIC PROJECT // [Topic] (unique) MQTT device topic, set to 'PROJECT "_%06X"' for unique topic including device MAC address
2017-05-08 12:21:45 +01:00
# define MQTT_GRPTOPIC "sonoffs" // [GroupTopic] MQTT Group topic
2018-08-05 19:01:50 +01:00
# define MQTT_BUTTON_TOPIC "0" // [ButtonTopic] MQTT button topic, "0" = same as MQTT_TOPIC, set to 'PROJECT "_BTN_%06X"' for unique topic including device MAC address
# define MQTT_SWITCH_TOPIC "0" // [SwitchTopic] MQTT button topic, "0" = same as MQTT_TOPIC, set to 'PROJECT "_SW_%06X"' for unique topic including device MAC address
2017-05-08 12:21:45 +01:00
# define MQTT_CLIENT_ID "DVES_%06X" // [MqttClient] Also fall back topic using Chip Id = last 6 characters of MAC address
2017-01-28 13:41:01 +00:00
// -- MQTT - Telemetry ----------------------------
# define TELE_PERIOD 300 // [TelePeriod] Telemetry (0 = disable, 10 - 3600 seconds)
// -- MQTT - Domoticz -----------------------------
2018-04-05 14:26:16 +01:00
# define DOMOTICZ_UPDATE_TIMER 0 // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds)
2017-01-28 13:41:01 +00:00
2018-01-18 15:19:28 +00:00
// -- MQTT - Home Assistant Discovery -------------
2018-04-05 14:26:16 +01:00
# define HOME_ASSISTANT_DISCOVERY_ENABLE 0 // [SetOption19] Home Assistant Discovery (0 = Disable, 1 = Enable)
2018-01-18 15:19:28 +00:00
2017-01-28 13:41:01 +00:00
// -- HTTP ----------------------------------------
2018-04-05 14:26:16 +01:00
# define WEB_SERVER 2 // [WebServer] Web server (0 = Off, 1 = Start as User, 2 = Start as Admin)
# define WEB_PASSWORD "" // [WebPassword] Web server Admin mode Password for WEB_USERNAME (empty string = Disable)
# define FRIENDLY_NAME "Sonoff" // [FriendlyName] Friendlyname up to 32 characters used by webpages and Alexa
# define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)
2017-01-28 13:41:01 +00:00
// -- Time - Up to three NTP servers in your region
2017-03-12 17:36:33 +00:00
# define NTP_SERVER1 "pool.ntp.org" // [NtpServer1] Select first NTP server by name or IP address (129.250.35.250)
# define NTP_SERVER2 "nl.pool.ntp.org" // [NtpServer2] Select second NTP server by name or IP address (5.39.184.5)
# define NTP_SERVER3 "0.nl.pool.ntp.org" // [NtpServer3] Select third NTP server by name or IP address (93.94.224.67)
2017-01-28 13:41:01 +00:00
2018-05-13 18:43:48 +01:00
// -- Time - Start Daylight Saving Time and timezone offset from UTC in minutes
2018-05-15 11:32:53 +01:00
# define TIME_DST_HEMISPHERE North // [TimeDst] Hemisphere (0 or North, 1 or South)
# define TIME_DST_WEEK Last // Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth)
# define TIME_DST_DAY Sun // Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat)
# define TIME_DST_MONTH Mar // Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec)
# define TIME_DST_HOUR 2 // Hour (0 to 23)
# define TIME_DST_OFFSET +120 // Offset from UTC in minutes (-780 to +780)
2018-05-13 18:43:48 +01:00
// -- Time - Start Standard Time and timezone offset from UTC in minutes
2018-05-15 11:32:53 +01:00
# define TIME_STD_HEMISPHERE North // [TimeStd] Hemisphere (0 or North, 1 or South)
# define TIME_STD_WEEK Last // Week of month (0 or Last, 1 or First, 2 or Second, 3 or Third, 4 or Fourth)
# define TIME_STD_DAY Sun // Day of week (1 or Sun, 2 or Mon, 3 or Tue, 4 or Wed, 5 or Thu, 6 or Fri, 7 or Sat)
# define TIME_STD_MONTH Oct // Month (1 or Jan, 2 or Feb, 3 or Mar, 4 or Apr, 5 or May, 6 or Jun, 7 or Jul, 8 or Aug, 9 or Sep, 10 or Oct, 11 or Nov, 12 or Dec)
# define TIME_STD_HOUR 3 // Hour (0 to 23)
# define TIME_STD_OFFSET +60 // Offset from UTC in minutes (-780 to +780)
2018-05-13 18:43:48 +01:00
2018-04-05 14:26:16 +01:00
// -- Location ------------------------------------
# define LATITUDE 48.858360 // [Latitude] Your location to be used with sunrise and sunset
# define LONGITUDE 2.294442 // [Longitude] Your location to be used with sunrise and sunset
2017-01-28 13:41:01 +00:00
// -- Application ---------------------------------
2018-04-05 14:26:16 +01:00
# define APP_TIMEZONE 1 // [Timezone] +1 hour (Amsterdam) (-13 .. 14 = hours from UTC, 99 = use TIME_DST/TIME_STD)
# define APP_LEDSTATE LED_POWER // [LedState] Function of led
// (LED_OFF, LED_POWER, LED_MQTTSUB, LED_POWER_MQTTSUB, LED_MQTTPUB, LED_POWER_MQTTPUB, LED_MQTT, LED_POWER_MQTT)
2017-01-28 13:41:01 +00:00
# define APP_PULSETIME 0 // [PulseTime] Time in 0.1 Sec to turn off power for relay 1 (0 = disabled)
2018-04-05 14:26:16 +01:00
# define APP_POWERON_STATE POWER_ALL_SAVED // [PowerOnState] Power On Relay state
// (POWER_ALL_OFF, POWER_ALL_ON, POWER_ALL_SAVED_TOGGLE, POWER_ALL_SAVED, POWER_ALL_ALWAYS_ON, POWER_ALL_OFF_PULSETIME_ON)
2017-01-28 13:41:01 +00:00
# define APP_BLINKTIME 10 // [BlinkTime] Time in 0.1 Sec to blink/toggle power for relay 1
# define APP_BLINKCOUNT 10 // [BlinkCount] Number of blinks (0 = 32000)
2017-02-13 16:25:46 +00:00
# define APP_SLEEP 0 // [Sleep] Sleep time to lower energy consumption (0 = Off, 1 - 250 mSec)
2017-01-28 13:41:01 +00:00
2018-08-27 11:01:20 +01:00
# define KEY_DEBOUNCE_TIME 50 // [ButtonDebounce] Number of mSeconds button press debounce time
2017-06-16 13:33:49 +01:00
# define KEY_HOLD_TIME 40 // [SetOption32] Number of 0.1 seconds to hold Button or external Pushbutton before sending HOLD message
2018-08-27 11:01:20 +01:00
# define SWITCH_DEBOUNCE_TIME 50 // [SwitchDebounce] Number of mSeconds switch press debounce time
2018-04-05 14:26:16 +01:00
# define SWITCH_MODE TOGGLE // [SwitchMode] TOGGLE, FOLLOW, FOLLOW_INV, PUSHBUTTON, PUSHBUTTON_INV, PUSHBUTTONHOLD, PUSHBUTTONHOLD_INV, PUSHBUTTON_TOGGLE (the wall switch state)
# define WS2812_LEDS 30 // [Pixels] Number of WS2812 LEDs to start with (max is 512)
2017-01-28 13:41:01 +00:00
2017-07-30 16:55:37 +01:00
# define TEMP_CONVERSION 0 // [SetOption8] Return temperature in (0 = Celsius or 1 = Fahrenheit)
2017-05-03 17:19:13 +01:00
# define TEMP_RESOLUTION 1 // [TempRes] Maximum number of decimals (0 - 3) showing sensor Temperature
# define HUMIDITY_RESOLUTION 1 // [HumRes] Maximum number of decimals (0 - 3) showing sensor Humidity
# define PRESSURE_RESOLUTION 1 // [PressRes] Maximum number of decimals (0 - 3) showing sensor Pressure
# define ENERGY_RESOLUTION 3 // [EnergyRes] Maximum number of decimals (0 - 5) showing energy usage in kWh
2017-01-28 13:41:01 +00:00
2018-04-05 14:26:16 +01:00
/*********************************************************************************************\
* END OF SECTION 1
*
* SECTION 2
* - Enable a feature by removing both // in front of it
* - Disable a feature by preceding it with //
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
// -- Localization --------------------------------
// If non selected the default en-GB will be used
2018-04-20 15:07:06 +01:00
//#define MY_LANGUAGE bg-BG // Bulgarian in Bulgaria
2018-04-05 14:26:16 +01:00
//#define MY_LANGUAGE cs-CZ // Czech in Czech
//#define MY_LANGUAGE de-DE // German in Germany
2018-04-19 20:57:14 +01:00
//#define MY_LANGUAGE el-GR // Greek in Greece
2018-04-05 14:26:16 +01:00
//#define MY_LANGUAGE en-GB // English in Great Britain. Enabled by Default
//#define MY_LANGUAGE es-AR // Spanish in Argentina
//#define MY_LANGUAGE fr-FR // French in France
//#define MY_LANGUAGE hu-HU // Hungarian in Hungary
//#define MY_LANGUAGE it-IT // Italian in Italy
//#define MY_LANGUAGE nl-NL // Dutch in the Netherlands
//#define MY_LANGUAGE pl-PL // Polish in Poland
2018-05-04 14:39:18 +01:00
//#define MY_LANGUAGE pt-BR // Portuguese in Brazil
2018-04-05 14:26:16 +01:00
//#define MY_LANGUAGE pt-PT // Portuguese in Portugal
//#define MY_LANGUAGE ru-RU // Russian in Russia
2018-07-26 09:57:59 +01:00
//#define MY_LANGUAGE tr-TR // Turkish in Turkey
2018-05-29 13:47:53 +01:00
//#define MY_LANGUAGE uk-UK // Ukrainian in Ukrain
2018-04-05 14:26:16 +01:00
//#define MY_LANGUAGE zh-CN // Chinese (Simplified) in China
//#define MY_LANGUAGE zh-TW // Chinese (Traditional) in Taiwan
2018-07-15 16:30:38 +01:00
// -- Wifi Config tools ---------------------------
2018-07-14 14:35:56 +01:00
//#define USE_WPS // Add support for WPS as initial wifi configuration tool (+33k code, 1k mem (5k mem with core v2.4.2+))
2018-07-15 14:21:48 +01:00
//#define USE_SMARTCONFIG // Add support for Wifi SmartConfig as initial wifi configuration tool (+23k code, +0.6k mem)
2018-07-14 14:35:56 +01:00
// -- OTA -----------------------------------------
//#define USE_ARDUINO_OTA // Add optional support for Arduino OTA (+13k code)
2018-04-05 14:26:16 +01:00
/*-------------------------------------------------------------------------------------------*\
* Select ONE of possible three MQTT library types below
\ * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
// Default MQTT driver for both non-TLS and TLS connections. Blocks network if MQTT server is unavailable.
2018-06-05 22:54:35 +01:00
# define MQTT_LIBRARY_TYPE MQTT_PUBSUBCLIENT // Use PubSubClient library
2018-04-05 14:26:16 +01:00
// Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support
2018-06-05 22:54:35 +01:00
//#define MQTT_LIBRARY_TYPE MQTT_TASMOTAMQTT // Use TasmotaMqtt library (+4k4 code, +4k mem) - non-TLS only
2018-04-05 14:26:16 +01:00
// Alternative MQTT driver does not block network when MQTT server is unavailable. No TLS support
//#define MQTT_LIBRARY_TYPE MQTT_ESPMQTTARDUINO // Use (patched) esp-mqtt-arduino library (+4k8 code, +4k mem) - non-TLS only
2018-04-25 11:06:53 +01:00
// -- MQTT ----------------------------------------
# define MQTT_TELE_RETAIN 0 // Tele messages may send retain flag (0 = off, 1 = on)
2018-04-05 14:26:16 +01:00
// -- MQTT - Domoticz -----------------------------
# define USE_DOMOTICZ // Enable Domoticz (+6k code, +0.3k mem)
# define DOMOTICZ_IN_TOPIC "domoticz / in" // Domoticz Input Topic
# define DOMOTICZ_OUT_TOPIC "domoticz / out" // Domoticz Output Topic
// -- MQTT - Home Assistant Discovery -------------
2018-06-05 22:54:35 +01:00
# define USE_HOME_ASSISTANT // Enable Home Assistant Discovery Support (+2k code)
2018-04-05 14:26:16 +01:00
# define HOME_ASSISTANT_DISCOVERY_PREFIX "homeassistant" // Home Assistant discovery prefix
// -- MQTT - TLS ----------------------------------
// !!! TLS uses a LOT OF MEMORY so be careful to enable other options at the same time !!!
//#define USE_MQTT_TLS // Use TLS for MQTT connection (+53k code, +15k mem)
2018-04-18 16:28:45 +01:00
// -- KNX IP Protocol -----------------------------
2018-07-23 04:54:25 +01:00
//#define USE_KNX // Enable KNX IP Protocol Support (+9.4k code, +3k7 mem)
# define USE_KNX_WEB_MENU // Enable KNX WEB MENU (+8.3k code, +144 mem)
2018-04-18 16:28:45 +01:00
2018-04-05 14:26:16 +01:00
// -- HTTP ----------------------------------------
2018-07-15 14:21:48 +01:00
# define USE_WEBSERVER // Enable web server and Wifi Manager (+66k code, +8k mem)
2018-04-05 14:26:16 +01:00
# define WEB_PORT 80 // Web server Port for User and Admin mode
# define WEB_USERNAME "admin" // Web server Admin mode user name
# define USE_EMULATION // Enable Belkin WeMo and Hue Bridge emulation for Alexa (+16k code, +2k mem)
// -- mDNS ----------------------------------------
2018-06-05 22:54:35 +01:00
# define USE_DISCOVERY // Enable mDNS for the following services (+8k code, +0.3k mem)
2018-04-05 14:26:16 +01:00
# define WEBSERVER_ADVERTISE // Provide access to webserver by name <Hostname>.local/
# define MQTT_HOST_DISCOVERY // Find MQTT host server (overrides MQTT_HOST if found)
// -- Time ----------------------------------------
# define USE_TIMERS // Add support for up to 16 timers (+2k2 code)
# define USE_TIMERS_WEB // Add timer webpage support (+4k5 code)
# define USE_SUNRISE // Add support for Sunrise and sunset tools (+16k)
2018-04-23 10:37:46 +01:00
# define SUNRISE_DAWN_ANGLE DAWN_NORMAL // Select desired Dawn Angle from (DAWN_NORMAL, DAWN_CIVIL, DAWN_NAUTIC, DAWN_ASTRONOMIC)
2018-04-05 14:26:16 +01:00
2018-04-13 16:42:11 +01:00
// -- Rules ---------------------------------------
# define USE_RULES // Add support for rules (+4k4 code)
2018-02-07 16:50:02 +00:00
// -- Internal Analog input -----------------------
2017-03-14 17:03:25 +00:00
# define USE_ADC_VCC // Display Vcc in Power status. Disable for use as Analog input on selected devices
2018-02-07 16:50:02 +00:00
// -- One wire sensors ----------------------------
2017-12-01 14:59:53 +00:00
// WARNING: Select none for default one DS18B20 sensor or enable one of the following two options for multiple sensors
2017-12-05 16:46:26 +00:00
//#define USE_DS18x20 // Optional for more than one DS18x20 sensors with id sort, single scan and read retry (+1k3 code)
//#define USE_DS18x20_LEGACY // Optional for more than one DS18x20 sensors with dynamic scan using library OneWire (+1k5 code)
2017-01-28 13:41:01 +00:00
2017-12-27 13:10:55 +00:00
// -- I2C sensors ---------------------------------
2017-12-08 13:14:10 +00:00
# define USE_I2C // I2C using library wire (+10k code, 0k2 mem, 124 iram)
2018-08-18 17:11:22 +01:00
2018-01-05 11:26:19 +00:00
# ifdef USE_I2C
2018-07-17 11:51:55 +01:00
# define USE_SHT // Enable SHT1X sensor (+1k4 code)
# define USE_HTU // Enable HTU21/SI7013/SI7020/SI7021 sensor (I2C address 0x40) (+1k5 code)
# define USE_BMP // Enable BMP085/BMP180/BMP280/BME280 sensor (I2C address 0x76 or 0x77) (+4k code)
2018-07-26 09:57:59 +01:00
// #define USE_BME680 // Enable support for BME680 sensor using Bosch BME680 library (+4k code)
2018-07-17 11:51:55 +01:00
# define USE_BH1750 // Enable BH1750 sensor (I2C address 0x23 or 0x5C) (+0k5 code)
// #define USE_VEML6070 // Enable VEML6070 sensor (I2C addresses 0x38 and 0x39) (+0k5 code)
// #define USE_ADS1115 // Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) based on Adafruit ADS1x15 library (no library needed) (+0k7 code)
// #define USE_ADS1115_I2CDEV // Enable ADS1115 16 bit A/D converter (I2C address 0x48, 0x49, 0x4A or 0x4B) using library i2cdevlib-Core and i2cdevlib-ADS1115 (+2k code)
// #define USE_INA219 // Enable INA219 (I2C address 0x40, 0x41 0x44 or 0x45) Low voltage and current sensor (+1k code)
# define USE_SHT3X // Enable SHT3x (I2C address 0x44 or 0x45) or SHTC3 (I2C address 0x70) sensor (+0k7 code)
// #define USE_TSL2561 // Enable TSL2561 sensor (I2C address 0x29, 0x39 or 0x49) using library Joba_Tsl2561 (+2k3 code)
// #define USE_MGS // Enable Xadow and Grove Mutichannel Gas sensor using library Multichannel_Gas_Sensor (+10k code)
2018-02-18 17:39:28 +00:00
# define MGS_SENSOR_ADDR 0x04 // Default Mutichannel Gas sensor i2c address
2018-07-17 11:51:55 +01:00
# define USE_SGP30 // Enable SGP30 sensor (I2C address 0x58) (+1k1 code)
// #define USE_SI1145 // Enable SI1145/46/47 sensor (I2C address 0x60) (+1k code)
# define USE_LM75AD // Enable LM75AD sensor (I2C addresses 0x48 - 0x4F) (+0k5 code)
// #define USE_APDS9960 // Enable APDS9960 Proximity Sensor (I2C address 0x39). Disables SHT and VEML6070 (+4k7 code)
2018-08-27 07:12:33 +01:00
// #define USE_MCP230xx // Enable MCP23008/MCP23017 for GP INPUT ONLY (I2C addresses 0x20 - 0x27) providing command Sensor29 for configuration (+4k7 code)
// #define USE_MCP230xx_OUTPUT // Enable MCP23008/MCP23017 OUTPUT support through sensor29 commands (+1k5 code)
2018-08-09 11:02:46 +01:00
// #define USE_MCP230xx_DISPLAYOUTPUT // Enable MCP23008/MCP23017 to display state of OUTPUT pins on Web UI (+0k2 code)
2018-07-17 11:51:55 +01:00
// #define USE_MPR121 // Enable MPR121 controller (I2C addresses 0x5A, 0x5B, 0x5C and 0x5D) in input mode for touch buttons (+1k3 code)
2018-07-23 16:42:12 +01:00
// #define USE_CCS811 // Enable CCS811 sensor (I2C address 0x5A) (+2k2 code)
2018-07-28 15:16:53 +01:00
// #define USE_MPU6050 // Enable MPU6050 sensor (I2C address 0x68 AD0 low or 0x69 AD0 high) (+2k6 code)
2018-08-18 17:11:22 +01:00
// #define USE_DISPLAY // Add I2C Display Support for LCD, Oled and up to eigth Matrices (+19k code)
2018-08-20 17:07:19 +01:00
# define USE_DISPLAY_MODES1TO5 // Enable display mode 1 to 5 in addition to mode 0
# define USE_DISPLAY_LCD // [DisplayModel 1] Enable Lcd display (I2C addresses 0x27 and 0x3F)
# define USE_DISPLAY_SSD1306 // [DisplayModel 2] Enable SSD1306 Oled 128x64 display (I2C addresses 0x3C and 0x3D)
# define USE_DISPLAY_MATRIX // [DisplayModel 3] Enable 8x8 Matrix display (I2C adresseses see below)
# define MTX_ADDRESS1 0x71 // [DisplayAddress1] I2C address of first 8x8 matrix module
# define MTX_ADDRESS2 0x74 // [DisplayAddress2] I2C address of second 8x8 matrix module
# define MTX_ADDRESS3 0x75 // [DisplayAddress3] I2C address of third 8x8 matrix module
# define MTX_ADDRESS4 0x72 // [DisplayAddress4] I2C address of fourth 8x8 matrix module
# define MTX_ADDRESS5 0x73 // [DisplayAddress5] I2C address of fifth 8x8 matrix module
# define MTX_ADDRESS6 0x76 // [DisplayAddress6] I2C address of sixth 8x8 matrix module
# define MTX_ADDRESS7 0x00 // [DisplayAddress7] I2C address of seventh 8x8 matrix module
# define MTX_ADDRESS8 0x00 // [DisplayAddress8] I2C address of eigth 8x8 matrix module
2018-08-18 17:11:22 +01:00
2018-01-05 11:26:19 +00:00
# endif // USE_I2C
2018-04-05 14:26:16 +01:00
// -- SPI sensors ---------------------------------
2018-08-18 17:11:22 +01:00
//#define USE_SPI // SPI using library TasmotaTFT
2018-04-05 14:26:16 +01:00
# ifdef USE_SPI
2018-08-18 17:11:22 +01:00
# ifndef USE_DISPLAY
# define USE_DISPLAY // Add SPI Display support for 320x240 and 480x320 TFT
# endif
2018-08-20 17:07:19 +01:00
# define USE_DISPLAY_ILI9341 // [DisplayModel 4] Enable ILI9341 Tft 480x320 display
// #define USE_DISPLAY_EPAPER // [DisplayModel 5] Enable e-paper display
2018-04-05 14:26:16 +01:00
# endif // USE_SPI
2018-02-07 16:50:02 +00:00
// -- Serial sensors ------------------------------
2018-06-05 22:54:35 +01:00
# define USE_MHZ19 // Add support for MH-Z19 CO2 sensor (+2k code)
# define USE_SENSEAIR // Add support for SenseAir K30, K70 and S8 CO2 sensor (+2k3 code)
2017-12-27 13:10:55 +00:00
# define CO2_LOW 800 // Below this CO2 value show green light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
# define CO2_HIGH 1200 // Above this CO2 value show red light (needs PWM or WS2812 RG(B) led and enable with SetOption18 1)
2018-06-05 22:54:35 +01:00
# define USE_PMS5003 // Add support for PMS5003 and PMS7003 particle concentration sensor (+1k3 code)
# define USE_NOVA_SDS // Add support for SDS011 and SDS021 particle concentration sensor (+0k7 code)
# define USE_PZEM004T // Add support for PZEM004T Energy monitor (+2k code)
2018-03-20 13:31:11 +00:00
# define USE_SERIAL_BRIDGE // Add support for software Serial Bridge (+0k8 code)
2018-08-18 17:11:22 +01:00
//#define USE_SDM120 // Add support for Eastron SDM120-Modbus energy meter (+1k7 code)
2018-05-14 13:04:10 +01:00
# define SDM120_SPEED 9600 // SDM120-Modbus RS485 serial speed (default: 2400 baud)
2018-08-18 17:11:22 +01:00
//#define USE_SDM630 // Add support for Eastron SDM630-Modbus energy meter (+2k code)
2018-05-16 09:07:41 +01:00
# define SDM630_SPEED 9600 // SDM630-Modbus RS485 serial speed (default: 9600 baud)
2018-01-27 16:52:48 +00:00
2018-02-07 16:50:02 +00:00
// -- Low level interface devices -----------------
2018-06-05 22:54:35 +01:00
# define USE_IR_REMOTE // Send IR remote commands using library IRremoteESP8266 and ArduinoJson (+4k code, 0k3 mem, 48 iram)
2017-04-03 15:38:15 +01:00
// #define USE_IR_HVAC // Support for HVAC system using IR (+2k code)
2018-06-05 22:54:35 +01:00
# define USE_IR_RECEIVE // Support for IR receiver (+5k5 code, 264 iram)
2017-02-14 13:27:08 +00:00
2017-12-08 13:14:10 +00:00
# define USE_WS2812 // WS2812 Led string using library NeoPixelBus (+5k code, +1k mem, 232 iram) - Disable by //
2018-03-17 14:22:29 +00:00
# define USE_WS2812_CTYPE NEO_GRB // WS2812 Color type (NEO_RGB, NEO_GRB, NEO_BRG, NEO_RBG, NEO_RGBW, NEO_GRBW)
2017-10-18 17:22:34 +01:00
// #define USE_WS2812_DMA // DMA supports only GPIO03 (= Serial RXD) (+1k mem). When USE_WS2812_DMA is enabled expect Exceptions on Pow
2017-01-28 13:41:01 +00:00
2018-06-05 22:54:35 +01:00
# define USE_ARILUX_RF // Add support for Arilux RF remote controller (+0k8 code, 252 iram (non 2.3.0))
2017-11-15 22:07:45 +00:00
2018-06-05 22:54:35 +01:00
# define USE_SR04 // Add support for HC-SR04 ultrasonic devices (+1k code)
2018-04-20 13:31:09 +01:00
2018-08-18 17:11:22 +01:00
//#define USE_TM1638 // Add support for TM1638 switches copying Switch1 .. Switch8 (+1k code)
2018-06-28 16:40:37 +01:00
2018-07-14 14:35:56 +01:00
# define USE_RF_FLASH // Add support for flashing the EFM8BB1 chip on the Sonoff RF Bridge. C2CK must be connected to GPIO4, C2D to GPIO5 on the PCB (+3k code)
2018-06-04 17:10:38 +01:00
2018-06-24 16:50:42 +01:00
/*********************************************************************************************\
* Debug features are only supported in development branch
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
//#define USE_DEBUG_DRIVER // Use xdrv_99_debug.ino providing commands CpuChk, CfgXor, CfgDump, CfgPeek and CfgPoke
2018-04-23 10:37:46 +01:00
/*********************************************************************************************\
* Select features and sensors enabled in previous version saving space
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2018-06-24 16:50:42 +01:00
//#define USE_CLASSIC // Create sonoff-classic (See sonoff_post.h for selected features)
2018-04-23 10:37:46 +01:00
2018-02-10 14:13:27 +00:00
/*********************************************************************************************\
2018-08-28 16:34:51 +01:00
* Select useful sensors - overrides above undefines ! !
2018-02-10 14:13:27 +00:00
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2018-08-28 16:34:51 +01:00
//#define USE_SENSORS // Create sonoff-sensors with useful sensors enabled (See sonoff_post.h for selected sensors)
2018-04-23 10:37:46 +01:00
/*********************************************************************************************\
* Select KNX without Emulation to save space
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2018-06-05 22:54:35 +01:00
//#define USE_KNX_NO_EMULATION // Create sonoff-knx with KNX but without Emulation (See sonoff_post.h)
2018-02-10 14:13:27 +00:00
2017-03-05 14:07:30 +00:00
/*********************************************************************************************\
2017-03-08 15:20:45 +00:00
* Compile a minimal version if upgrade memory gets tight ONLY TO BE USED FOR UPGRADE STEP 1 !
2017-09-02 13:37:02 +01:00
* To be used as step 1 during upgrade .
2017-03-05 14:07:30 +00:00
* Step 2 is re - compile with option BE_MINIMAL commented out .
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
//#define BE_MINIMAL // Minimal version if upgrade memory gets tight (-45k code, -2k mem)
2017-01-28 13:41:01 +00:00
/*********************************************************************************************\
* No user configurable items below
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2017-03-21 15:17:28 +00:00
# if defined(USE_MQTT_TLS) && defined(USE_WEBSERVER)
# error "Select either USE_MQTT_TLS or USE_WEBSERVER as there is just not enough memory to play with"
# endif
2017-11-03 17:07:25 +00:00
# endif // _USER_CONFIG_H_
