Tasmota/tasmota/language/ru_RU.h

906 lines
38 KiB
C
Raw Normal View History

/*
ru-RU.h - localization for Russian - Rissia for Tasmota
2019-12-31 13:23:34 +00:00
Copyright (C) 2020 Theo Arends / roman-vn
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _LANGUAGE_RU_RU_H_
#define _LANGUAGE_RU_RU_H_
/*************************** ATTENTION *******************************\
*
* Due to memory constraints only UTF-8 is supported.
* To save code space keep text as short as possible.
* Time and Date provided by SDK can not be localized (yet).
* Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
* Use online command Prefix to translate cmnd, stat and tele.
*
* Updated until v5.12.0b
\*********************************************************************/
//#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
#define LANGUAGE_LCID 1049
// HTML (ISO 639-1) Language Code
#define D_HTML_LANGUAGE "ru"
// "2017-03-07T11:08:02" - ISO8601:2004
#define D_YEAR_MONTH_SEPARATOR "-"
#define D_MONTH_DAY_SEPARATOR "-"
#define D_DATE_TIME_SEPARATOR "T"
#define D_HOUR_MINUTE_SEPARATOR ":"
#define D_MINUTE_SECOND_SEPARATOR ":"
#define D_DAY3LIST "ВскПонВтрСрдЧетПятСуб"
#define D_MONTH3LIST "ЯнвФевМарАпрМайИюнИюлАвгСенОктНояДек"
// Non JSON decimal separator
#define D_DECIMAL_SEPARATOR ","
// Common
#define D_ADMIN "Admin"
#define D_AIR_QUALITY "Качество воздуха"
#define D_AP "AP" // Access Point
#define D_AS "как"
#define D_AUTO "АВТО"
#define D_BATT "Batt" // Short for Battery
#define D_BLINK "Мигать"
#define D_BLINKOFF "Не Мигать"
#define D_BOOT_COUNT "Количество загрузок"
#define D_BRIGHTLIGHT "Яркость"
#define D_BSSID "BSSId"
#define D_BUTTON "Кнопка"
#define D_BY "by" // Written by me
#define D_BYTES "Байт"
#define D_CELSIUS "Цельсия"
#define D_CHANNEL "Channel"
#define D_CO2 "Углекислый газ"
#define D_CODE "код" // Button code
#define D_COLDLIGHT "Холодный"
#define D_COMMAND "Команда"
#define D_CONNECTED "Соединен"
#define D_CORS_DOMAIN "CORS Domain"
#define D_COUNT "Подсчет"
#define D_COUNTER "Счетчик"
#define D_CT_POWER "CT Power"
#define D_CURRENT "Ток" // As in Voltage and Current
#define D_DATA "Данные"
#define D_DARKLIGHT "Темный"
#define D_DEBUG "Отладка"
#define D_DEWPOINT "Dew point"
#define D_DISABLED "Блокирован"
#define D_DISTANCE "Distance"
#define D_DNS_SERVER "DNS Сервер"
#define D_DO "Disolved Oxygen"
#define D_DONE "Выполнено"
#define D_DST_TIME "DST"
#define D_EC "EC"
#define D_ECO2 "eCO₂"
#define D_EMULATION "Эмуляция"
#define D_ENABLED "Активно"
#define D_ERASE "Стирать"
#define D_ERROR "Ошибка"
#define D_FAHRENHEIT "Фаренгейт"
#define D_FAILED "Неудачно"
#define D_FALLBACK "Обратная связь"
#define D_FALLBACK_TOPIC "Топик обратной связи"
#define D_FALSE "Ложно"
#define D_FILE "Файл"
#define D_FLOW_RATE "Flow rate"
#define D_FREE_MEMORY "Свободная память"
2020-05-12 13:19:10 +01:00
#define D_PSR_MAX_MEMORY "PS-RAM Memory"
#define D_PSR_FREE_MEMORY "PS-RAM free Memory"
#define D_FREQUENCY "Frequency"
#define D_GAS "Газ"
#define D_GATEWAY "Шлюз"
#define D_GROUP "Группа"
#define D_HOST "Хост"
#define D_HOSTNAME "Имя Хоста"
#define D_HUMIDITY "Влажность"
#define D_ILLUMINANCE "Освещенность"
#define D_IMMEDIATE "немедленно" // Button immediate
#define D_INDEX "Индекс"
#define D_INFO "Инфо"
#define D_INFRARED "Infrared"
#define D_INITIALIZED "Инициализировано"
#define D_IP_ADDRESS "IP Адрес"
#define D_LIGHT "Свет"
#define D_LWT "LWT"
#define D_LQI "LQI" // Zigbee Link Quality Index
#define D_MODULE "Модуль"
2019-12-24 01:22:29 +00:00
#define D_MOISTURE "Moisture"
#define D_MQTT "MQTT"
#define D_MULTI_PRESS "многократное нажатие"
#define D_NOISE "Шум"
#define D_NONE "Нет"
#define D_O2 "Oxygen"
#define D_OFF "Выкл"
#define D_OFFLINE "Офф-лайн"
#define D_OK "Ок"
#define D_ON "Вкл"
#define D_ONLINE "Он-лайн"
#define D_ORP "ORP"
#define D_PASSWORD "Пароль"
#define D_PH "pH"
#define D_PORT "Порт"
#define D_POWER_FACTOR "Коэффициент Мощности"
#define D_POWERUSAGE "Мощность"
#define D_POWERUSAGE_ACTIVE "Active Power"
#define D_POWERUSAGE_APPARENT "Apparent Power"
#define D_POWERUSAGE_REACTIVE "Reactive Power"
#define D_PRESSURE "Давление"
#define D_PRESSUREATSEALEVEL "Давление на уровне моря"
#define D_PROGRAM_FLASH_SIZE "Размер Flash для программ"
#define D_PROGRAM_SIZE "Размер программы "
#define D_PROJECT "Проект"
#define D_RAIN "Rain"
2020-01-23 22:17:15 +00:00
#define D_RANGE "Range"
#define D_RECEIVED "Получено"
#define D_RESTART "Перезапуск"
#define D_RESTARTING "Перезапуск"
#define D_RESTART_REASON "Причина перезагрузки"
#define D_RESTORE "восстановление"
#define D_RETAINED "нераспред."
#define D_RULE "Rule"
#define D_SAVE "Сохранить"
#define D_SENSOR "Датчик"
#define D_SSID "SSId"
#define D_START "Старт"
#define D_STD_TIME "STD"
#define D_STOP "Стоп"
#define D_SUBNET_MASK "Маска Подсети"
#define D_SUBSCRIBE_TO "Подписаться на"
#define D_UNSUBSCRIBE_FROM "Unsubscribe from"
#define D_SUCCESSFUL "Успешно"
#define D_SUNRISE "Sunrise"
#define D_SUNSET "Sunset"
#define D_TEMPERATURE "Температура"
#define D_TO "до"
#define D_TOGGLE "Переключить"
#define D_TOPIC "Топик"
#define D_TOTAL_USAGE "Total Usage"
#define D_TRANSMIT "Передать"
#define D_TRUE "Истина"
#define D_TVOC "TVOC"
#define D_UPGRADE "обновление"
#define D_UPLOAD "Загрузить"
#define D_UPTIME "Uptime"
#define D_USER "Пользователь"
#define D_UTC_TIME "UTC"
#define D_UV_INDEX "UV Index"
#define D_UV_INDEX_1 "Low"
#define D_UV_INDEX_2 "Mid"
#define D_UV_INDEX_3 "High"
#define D_UV_INDEX_4 "Danger"
#define D_UV_INDEX_5 "BurnL1/2"
#define D_UV_INDEX_6 "BurnL3"
#define D_UV_INDEX_7 "OoR"
#define D_UV_LEVEL "УФ уровень"
#define D_UV_POWER "UV Power"
#define D_VERSION "Версия"
#define D_VOLTAGE "Напряжение"
#define D_VOLUME "Volume"
#define D_WEIGHT "Weight"
#define D_WARMLIGHT "Тепло"
#define D_WEB_SERVER "Web сервер"
// tasmota.ino
#define D_WARNING_MINIMAL_VERSION "ПРЕДУПРЕЖДЕНИЕ Эта версия не поддерживает персистентные настройки"
#define D_LEVEL_10 "уровень 1-0"
#define D_LEVEL_01 "уровень 0-1"
#define D_SERIAL_LOGGING_DISABLED "Serial logging отключен"
#define D_SYSLOG_LOGGING_REENABLED "Syslog logging включен"
#define D_SET_BAUDRATE_TO "Установить скорость передачи (Baudrate)"
#define D_RECEIVED_TOPIC "Полученный Топик"
#define D_DATA_SIZE "Размер данных"
#define D_ANALOG_INPUT "Аналоговый вход"
// support.ino
#define D_OSWATCH "osWatch"
#define D_BLOCKED_LOOP "Блокирующий цикл"
#define D_WPS_FAILED_WITH_STATUS "WPS конфигурация НЕУДАЧНА со статусом"
#define D_ACTIVE_FOR_3_MINUTES "активен в течение 3 минут"
#define D_FAILED_TO_START "не удалось запустить"
#define D_PATCH_ISSUE_2186 "Проблема с исправлением 2186"
#define D_CONNECTING_TO_AP "Подключение к AP"
#define D_IN_MODE "в режиме"
#define D_CONNECT_FAILED_NO_IP_ADDRESS "Ошибка подключения, IP-адрес не получен"
#define D_CONNECT_FAILED_AP_NOT_REACHED "Ошибка соединения, AP не может быть достигнута"
#define D_CONNECT_FAILED_WRONG_PASSWORD "Ошибка соединения"
#define D_CONNECT_FAILED_AP_TIMEOUT "Ошибка соединения с AP по тайм-ауту"
#define D_ATTEMPTING_CONNECTION "Попытка подключения..."
#define D_CHECKING_CONNECTION "Проверка соединения..."
#define D_QUERY_DONE "Запрос выполнен. Обнаружены службы MQTT"
#define D_MQTT_SERVICE_FOUND "MQTT сервис service найдено"
#define D_FOUND_AT "найдено в"
#define D_SYSLOG_HOST_NOT_FOUND "System лог хост не найден"
// settings.ino
#define D_SAVED_TO_FLASH_AT "Сохранено во флэш-память"
#define D_LOADED_FROM_FLASH_AT "Загружено из флэш-памяти"
#define D_USE_DEFAULTS "Использовать значение по умолчанию"
#define D_ERASED_SECTOR "Стереть сектор"
// xdrv_02_webserver.ino
#define D_NOSCRIPT "To use Tasmota, please enable JavaScript"
#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Прошивка MINIMAL<br>пожалуйста обновите"
#define D_WEBSERVER_ACTIVE_ON "Веб-сервер активен"
#define D_WITH_IP_ADDRESS "с IP-адресом"
#define D_WEBSERVER_STOPPED "Веб-сервер остановлен"
#define D_FILE_NOT_FOUND "Файл не найден"
#define D_REDIRECTED "Перенаправлено на адаптивный портал"
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifi менеджер устанавливает Точку Доступа и сохраняет станцию"
#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifi менеджер установил Точку Доступа"
#define D_TRYING_TO_CONNECT "Попытка подключения устройства к сети"
#define D_RESTART_IN "Перезапуск"
#define D_SECONDS "секунд"
#define D_DEVICE_WILL_RESTART "Устройство будет перезапущено через несколько секунд"
#define D_BUTTON_TOGGLE "Переключить"
#define D_CONFIGURATION "Конфигурация"
#define D_INFORMATION "Информация"
#define D_FIRMWARE_UPGRADE "Обновление прошивки"
#define D_CONSOLE "Консоль"
#define D_CONFIRM_RESTART "Подтвердить перезагрузку"
#define D_CONFIGURE_MODULE "Конфигурация Модуля"
#define D_CONFIGURE_WIFI "Конфигурация WiFi"
#define D_CONFIGURE_MQTT "Конфигурация MQTT"
#define D_CONFIGURE_DOMOTICZ "Конфигурация Domoticz"
#define D_CONFIGURE_LOGGING "Конфигурация Logging"
#define D_CONFIGURE_OTHER "Конфигурация прочее"
#define D_CONFIRM_RESET_CONFIGURATION "Подтвердить Сброс Конфигурации"
#define D_RESET_CONFIGURATION "Сброс Конфигурации"
#define D_BACKUP_CONFIGURATION "Резервное копирование Конфигурации"
#define D_RESTORE_CONFIGURATION "Восстановление Конфигурации"
#define D_MAIN_MENU "Главное Меню"
#define D_MODULE_PARAMETERS "Параметры модуля"
#define D_MODULE_TYPE "Тип модуля"
#define D_PULLUP_ENABLE "No Button/Switch pull-up"
#define D_ADC "ADC"
#define D_GPIO "GPIO"
#define D_SERIAL_IN "Serial вход"
#define D_SERIAL_OUT "Serial выход"
#define D_WIFI_PARAMETERS "Параметры Wifi"
#define D_SCAN_FOR_WIFI_NETWORKS "Сканирование беспроводных сетей Wifi"
#define D_SCAN_DONE "Сканирование завершено"
#define D_NO_NETWORKS_FOUND "Не найдено сетей"
#define D_REFRESH_TO_SCAN_AGAIN "Обновить для повторного сканирования"
#define D_DUPLICATE_ACCESSPOINT "Дублировать Точку Доступа (AP)"
#define D_SKIPPING_LOW_QUALITY "Пропущено из-за низкого качества"
#define D_RSSI "RSSI"
#define D_WEP "WEP"
#define D_WPA_PSK "WPA PSK"
#define D_WPA2_PSK "WPA2 PSK"
#define D_AP1_SSID "AP1 SSId"
#define D_AP1_PASSWORD "AP1 Пароль"
#define D_AP2_SSID "AP2 SSId"
#define D_AP2_PASSWORD "AP2 Пароль"
#define D_MQTT_PARAMETERS "Параметры MQTT"
#define D_CLIENT "Клиент"
#define D_FULL_TOPIC "Полный Топик"
#define D_LOGGING_PARAMETERS "Параметры Logging"
#define D_SERIAL_LOG_LEVEL "Serial лог уровень"
#define D_MQTT_LOG_LEVEL "Mqtt log level"
#define D_WEB_LOG_LEVEL "Web лог уровень"
#define D_SYS_LOG_LEVEL "System лог уровень"
#define D_MORE_DEBUG "Дополнительная информация для отладки"
#define D_SYSLOG_HOST "System лог хост"
#define D_SYSLOG_PORT "System лог порт"
#define D_TELEMETRY_PERIOD "Период телеметрии"
#define D_OTHER_PARAMETERS "Параметры Прочие"
#define D_TEMPLATE "Template"
#define D_ACTIVATE "Activate"
#define D_DEVICE_NAME "Device Name"
#define D_WEB_ADMIN_PASSWORD "Пароль Web администратора"
#define D_MQTT_ENABLE "MQTT активен"
#define D_MQTT_TLS_ENABLE "MQTT TLS"
#define D_FRIENDLY_NAME "Дружественное Имя"
#define D_BELKIN_WEMO "Belkin WeMo"
#define D_HUE_BRIDGE "Hue Bridge"
#define D_SINGLE_DEVICE "одиночное"
#define D_MULTI_DEVICE "мульти"
#define D_CONFIGURE_TEMPLATE "Конфигурация Template"
#define D_TEMPLATE_PARAMETERS "Параметры Template"
#define D_TEMPLATE_NAME "Name"
#define D_BASE_TYPE "Based on"
#define D_TEMPLATE_FLAGS "Options"
#define D_SAVE_CONFIGURATION "Сохранить конфигурацию"
#define D_CONFIGURATION_SAVED "Конфигурация сохранена "
#define D_CONFIGURATION_RESET "Конфигурация сброшена"
#define D_PROGRAM_VERSION "Версия программы"
#define D_BUILD_DATE_AND_TIME "Дата & Время сборки"
#define D_CORE_AND_SDK_VERSION "Версия Core/SDK"
#define D_FLASH_WRITE_COUNT "Кол-во записей Flash"
#define D_MAC_ADDRESS "MAC Адрес"
#define D_MQTT_HOST "MQTT Хост"
#define D_MQTT_PORT "MQTT Порт"
#define D_MQTT_CLIENT "MQTT Клиент ID"
#define D_MQTT_USER "MQTT Пользователь"
#define D_MQTT_TOPIC "MQTT Топик"
#define D_MQTT_GROUP_TOPIC "MQTT Топик группы"
#define D_MQTT_FULL_TOPIC "MQTT Топик полный"
#define D_MQTT_NO_RETAIN "MQTT No Retain"
#define D_MDNS_DISCOVERY "mDNS Обнаружение"
#define D_MDNS_ADVERTISE "mDNS Транcляция"
#define D_ESP_CHIP_ID "ID чипа ESP"
#define D_FLASH_CHIP_ID "ID чипа Flash памяти"
#define D_FLASH_CHIP_SIZE "Размер Flash памяти"
#define D_FREE_PROGRAM_SPACE "Свободное пространство программ"
#define D_UPGRADE_BY_WEBSERVER "Обновление через Веб-сервер"
#define D_OTA_URL "OTA Url"
#define D_START_UPGRADE "Начать обновление"
#define D_UPGRADE_BY_FILE_UPLOAD "Обновление путем загрузки файлов"
#define D_UPLOAD_STARTED "Загрузка началась"
#define D_UPGRADE_STARTED "Обновление началось"
#define D_UPLOAD_DONE "Загрузка завершена"
#define D_UPLOAD_TRANSFER "Upload transfer"
#define D_TRANSFER_STARTED "Transfer started"
#define D_UPLOAD_ERR_1 "Файл не выбран"
#define D_UPLOAD_ERR_2 "Недостаточно места"
2020-11-19 14:43:47 +00:00
#define D_UPLOAD_ERR_3 "Invalid file signature"
#define D_UPLOAD_ERR_4 "Размер прошивки больше, чем реальный размер флеш памяти"
#define D_UPLOAD_ERR_5 "Ошибка загрузки буфера"
#define D_UPLOAD_ERR_6 "Ошибка загрузки. Включено лог уровня 3"
#define D_UPLOAD_ERR_7 "Загрузка прервана"
#define D_UPLOAD_ERR_8 "Файл неверный"
#define D_UPLOAD_ERR_9 "Слишком большой файл"
#define D_UPLOAD_ERR_10 "Failed to init RF chip"
#define D_UPLOAD_ERR_11 "Failed to erase RF chip"
#define D_UPLOAD_ERR_12 "Failed to write to RF chip"
#define D_UPLOAD_ERR_13 "Failed to decode RF firmware"
#define D_UPLOAD_ERR_14 "Not compatible"
#define D_UPLOAD_ERROR_CODE "Код ошибки загрузки"
#define D_ENTER_COMMAND "Введите команду"
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Включить Веб лог уровня 2 если ожидается ответ"
#define D_NEED_USER_AND_PASSWORD "Ожидается user=<username>&password=<password>"
// xdrv_01_mqtt.ino
#define D_FINGERPRINT "Проверка TLS Fingerprint..."
#define D_TLS_CONNECT_FAILED_TO "Сбой подключения TLS к"
#define D_RETRY_IN "Повторить"
#define D_VERIFIED "Проверено Fingerprint"
#define D_INSECURE "Небезопасное соединение, недействительный Fingerprint"
#define D_CONNECT_FAILED_TO "Ошибка подключения к"
// xplg_wemohue.ino
#define D_MULTICAST_DISABLED "Multicast отключен"
#define D_MULTICAST_REJOINED "Multicast (ре)соединился"
#define D_MULTICAST_JOIN_FAILED "Multicast ошибка соединения"
#define D_FAILED_TO_SEND_RESPONSE "Не удалось отправить ответ"
#define D_WEMO "WeMo"
#define D_WEMO_BASIC_EVENT "WeMo основное событие"
#define D_WEMO_EVENT_SERVICE "WeMo служба событий"
#define D_WEMO_META_SERVICE "WeMo мета-сервис"
#define D_WEMO_SETUP "WeMo настройка"
#define D_RESPONSE_SENT "Ответ отправлен"
#define D_HUE "Hue"
#define D_HUE_BRIDGE_SETUP "Hue настройка"
#define D_HUE_API_NOT_IMPLEMENTED "Hue API не реализовано"
#define D_HUE_API "Hue API"
#define D_HUE_POST_ARGS "Hue POST args"
#define D_3_RESPONSE_PACKETS_SENT "3 ответных пакета получено"
// xdrv_07_domoticz.ino
#define D_DOMOTICZ_PARAMETERS "Параметры Domoticz"
#define D_DOMOTICZ_IDX "Idx"
#define D_DOMOTICZ_KEY_IDX "Key idx"
#define D_DOMOTICZ_SWITCH_IDX "Switch idx"
#define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
#define D_DOMOTICZ_TEMP "Temp"
#define D_DOMOTICZ_TEMP_HUM "Temp,Hum"
#define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
#define D_DOMOTICZ_POWER_ENERGY "Power,Energy"
#define D_DOMOTICZ_ILLUMINANCE "Illuminance"
#define D_DOMOTICZ_COUNT "Count/PM1"
#define D_DOMOTICZ_VOLTAGE "Voltage/PM2,5"
#define D_DOMOTICZ_CURRENT "Current/PM10"
#define D_DOMOTICZ_AIRQUALITY "AirQuality"
#define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter"
#define D_DOMOTICZ_UPDATE_TIMER "Update timer"
// xdrv_09_timers.ino
#define D_CONFIGURE_TIMER "Конфигурация Timer"
#define D_TIMER_PARAMETERS "Параметры Timer"
#define D_TIMER_ENABLE "Enable Timers"
#define D_TIMER_ARM "Arm"
#define D_TIMER_TIME "Time"
#define D_TIMER_DAYS "Days"
#define D_TIMER_REPEAT "Repeat"
#define D_TIMER_OUTPUT "Output"
#define D_TIMER_ACTION "Action"
// xdrv_10_knx.ino
#define D_CONFIGURE_KNX "Конфигурация KNX"
#define D_KNX_PARAMETERS "Параметры KNX"
#define D_KNX_GENERAL_CONFIG "General"
#define D_KNX_PHYSICAL_ADDRESS "Physical Address"
#define D_KNX_PHYSICAL_ADDRESS_NOTE "( Must be unique on the KNX network )"
#define D_KNX_ENABLE "Enable KNX"
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Data to Send to Group Addresses"
#define D_ADD "Add"
#define D_DELETE "Delete"
#define D_REPLY "Reply"
#define D_KNX_GROUP_ADDRESS_TO_READ "Group Addresses to Receive Data from"
#define D_RECEIVED_FROM "Received from"
#define D_KNX_COMMAND_WRITE "Write"
#define D_KNX_COMMAND_READ "Read"
#define D_KNX_COMMAND_OTHER "Other"
#define D_SENT_TO "sent to"
#define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
#define D_KNX_ENHANCEMENT "Communication Enhancement"
#define D_KNX_TX_SLOT "KNX TX"
#define D_KNX_RX_SLOT "KNX RX"
2020-06-18 19:25:59 +01:00
#define D_KNX_TX_SCENE "KNX SCENE TX"
#define D_KNX_RX_SCENE "KNX SCENE RX"
// xdrv_03_energy.ino
#define D_ENERGY_TODAY "Энергия Сегодня"
#define D_ENERGY_YESTERDAY "Энергия Вчера"
#define D_ENERGY_TOTAL "Энергия Всего"
// xdrv_27_shutter.ino
#define D_OPEN "Open"
#define D_CLOSE "Close"
#define D_DOMOTICZ_SHUTTER "Shutter"
// xdrv_28_pcf8574.ino
#define D_CONFIGURE_PCF8574 "Configure PCF8574"
#define D_PCF8574_PARAMETERS "PCF8574 parameters"
#define D_INVERT_PORTS "Invert Ports"
#define D_DEVICE "Device"
#define D_DEVICE_INPUT "Input"
#define D_DEVICE_OUTPUT "Output"
// xsns_05_ds18b20.ino
#define D_SENSOR_BUSY "Датчик DS18x20 занят"
#define D_SENSOR_CRC_ERROR "Датчик DS18x20 - ошибка CRC"
#define D_SENSORS_FOUND "Датчик DS18x20 найден"
// xsns_06_dht.ino
#define D_TIMEOUT_WAITING_FOR "Тайм-аут, в ожидании"
#define D_START_SIGNAL_LOW "сигнал старт низкий"
#define D_START_SIGNAL_HIGH "сигнал старт высокий"
#define D_PULSE "пульс"
#define D_CHECKSUM_FAILURE "Ошибка контрольной суммы"
// xsns_07_sht1x.ino
#define D_SENSOR_DID_NOT_ACK_COMMAND "Датчик не получил команду ACK"
#define D_SHT1X_FOUND "SHT1X найден"
// xsns_18_pms5003.ino
#define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter
#define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter
#define D_PARTICALS_BEYOND "Particals"
// xsns_27_apds9960.ino
#define D_GESTURE "Gesture"
#define D_COLOR_RED "Red"
#define D_COLOR_GREEN "Green"
#define D_COLOR_BLUE "Blue"
#define D_CCT "CCT"
#define D_PROXIMITY "Proximity"
// xsns_32_mpu6050.ino
#define D_AX_AXIS "Accel. X-Axis"
#define D_AY_AXIS "Accel. Y-Axis"
#define D_AZ_AXIS "Accel. Z-Axis"
#define D_GX_AXIS "Gyro X-Axis"
#define D_GY_AXIS "Gyro Y-Axis"
#define D_GZ_AXIS "Gyro Z-Axis"
// xsns_34_hx711.ino
#define D_HX_CAL_REMOVE "Remove weigth"
#define D_HX_CAL_REFERENCE "Load reference weigth"
#define D_HX_CAL_DONE "Calibrated"
#define D_HX_CAL_FAIL "Calibration failed"
#define D_RESET_HX711 "Reset Scale"
#define D_CONFIGURE_HX711 "Configure Scale"
#define D_HX711_PARAMETERS "Scale parameters"
#define D_ITEM_WEIGHT "Item weight"
#define D_REFERENCE_WEIGHT "Reference weigth"
#define D_CALIBRATE "Calibrate"
#define D_CALIBRATION "Calibration"
//xsns_35_tx20.ino
#define D_TX20_WIND_DIRECTION "Wind Direction"
#define D_TX20_WIND_SPEED "Wind Speed"
#define D_TX20_WIND_SPEED_MIN "Wind Speed Min"
#define D_TX20_WIND_SPEED_MAX "Wind Speed Max"
#define D_TX20_NORTH "N"
#define D_TX20_EAST "E"
#define D_TX20_SOUTH "S"
#define D_TX20_WEST "W"
// xsns_53_sml.ino
2020-03-15 12:00:31 +00:00
#define D_TPWRIN "Energy Total-In"
#define D_TPWROUT "Energy Total-Out"
#define D_TPWRCURR "Active Power-In/Out"
#define D_TPWRCURR1 "Active Power-In p1"
#define D_TPWRCURR2 "Active Power-In p2"
#define D_TPWRCURR3 "Active Power-In p3"
2020-03-14 18:32:27 +00:00
#define D_Strom_L1 "Current L1"
#define D_Strom_L2 "Current L2"
#define D_Strom_L3 "Current L3"
#define D_Spannung_L1 "Voltage L1"
#define D_Spannung_L2 "Voltage L2"
#define D_Spannung_L3 "Voltage L3"
#define D_METERNR "Meter_number"
#define D_METERSID "Service ID"
#define D_GasIN "Counter"
#define D_H2oIN "Counter"
#define D_StL1L2L3 "Current L1+L2+L3"
#define D_SpL1L2L3 "Voltage L1+L2+L3/3"
// tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
#define D_SENSOR_NONE "-нет-"
#define D_SENSOR_USER "User"
#define D_SENSOR_DHT11 "DHT11"
#define D_SENSOR_AM2301 "AM2301"
#define D_SENSOR_SI7021 "SI7021"
#define D_SENSOR_DS18X20 "DS18x20"
#define D_SENSOR_I2C_SCL "I2C SCL"
#define D_SENSOR_I2C_SDA "I2C SDA"
#define D_SENSOR_WS2812 "WS2812"
#define D_SENSOR_DFR562 "MP3 Player"
#define D_SENSOR_IRSEND "IRsend"
#define D_SENSOR_SWITCH "Свич" // Suffix "1"
#define D_SENSOR_BUTTON "Кнопка" // Suffix "1"
#define D_SENSOR_RELAY "Реле" // Suffix "1i"
#define D_SENSOR_LED "Led" // Suffix "1i"
#define D_SENSOR_LED_LINK "LedLink" // Suffix "i"
#define D_SENSOR_PWM "PWM" // Suffix "1"
#define D_SENSOR_COUNTER "Счетчик" // Suffix "1"
#define D_SENSOR_IRRECV "IRrecv"
#define D_SENSOR_MHZ_RX "MHZ Rx"
#define D_SENSOR_MHZ_TX "MHZ Tx"
#define D_SENSOR_PZEM004_RX "PZEM004 Rx"
#define D_SENSOR_PZEM016_RX "PZEM016 Rx"
#define D_SENSOR_PZEM017_RX "PZEM017 Rx"
#define D_SENSOR_PZEM0XX_TX "PZEM0XX Tx"
#define D_SENSOR_SAIR_RX "SAir Rx"
#define D_SENSOR_SAIR_TX "SAir Tx"
#define D_SENSOR_SPI_CS "SPI CS"
#define D_SENSOR_SPI_DC "SPI DC"
#define D_SENSOR_SPI_MISO "SPI MISO"
#define D_SENSOR_SPI_MOSI "SPI MOSI"
#define D_SENSOR_SPI_CLK "SPI CLK"
#define D_SENSOR_BACKLIGHT "Backlight"
#define D_SENSOR_PMS5003_TX "PMS5003 Tx"
#define D_SENSOR_PMS5003_RX "PMS5003 Rx"
#define D_SENSOR_SDS0X1_RX "SDS0X1 Rx"
#define D_SENSOR_SDS0X1_TX "SDS0X1 Tx"
#define D_SENSOR_HPMA_RX "HPMA Rx"
#define D_SENSOR_HPMA_TX "HPMA Tx"
#define D_SENSOR_SBR_RX "SerBr Rx"
#define D_SENSOR_SBR_TX "SerBr Tx"
#define D_SENSOR_SR04_TRIG "SR04 Tri/TX"
#define D_SENSOR_SR04_ECHO "SR04 Ech/RX"
#define D_SENSOR_SDM120_TX "SDMx20 Tx"
#define D_SENSOR_SDM120_RX "SDMx20 Rx"
#define D_SENSOR_SDM630_TX "SDM630 Tx"
#define D_SENSOR_SDM630_RX "SDM630 Rx"
#define D_SENSOR_WE517_TX "WE517 Tx"
#define D_SENSOR_WE517_RX "WE517 Rx"
#define D_SENSOR_TM1638_CLK "TM16 CLK"
#define D_SENSOR_TM1638_DIO "TM16 DIO"
#define D_SENSOR_TM1638_STB "TM16 STB"
#define D_SENSOR_HX711_SCK "HX711 SCK"
#define D_SENSOR_HX711_DAT "HX711 DAT"
#define D_SENSOR_TX2X_TX "TX2x"
#define D_SENSOR_RFSEND "RFSend"
#define D_SENSOR_RFRECV "RFrecv"
#define D_SENSOR_TUYA_TX "Tuya Tx"
#define D_SENSOR_TUYA_RX "Tuya Rx"
#define D_SENSOR_MGC3130_XFER "MGC3130 Xfr"
#define D_SENSOR_MGC3130_RESET "MGC3130 Rst"
#define D_SENSOR_SSPI_MISO "SSPI MISO"
#define D_SENSOR_SSPI_MOSI "SSPI MOSI"
#define D_SENSOR_SSPI_SCLK "SSPI SCLK"
#define D_SENSOR_SSPI_CS "SSPI CS"
#define D_SENSOR_SSPI_DC "SSPI DC"
#define D_SENSOR_RF_SENSOR "RF Sensor"
#define D_SENSOR_AZ_RX "AZ Rx"
#define D_SENSOR_AZ_TX "AZ Tx"
#define D_SENSOR_MAX31855_CS "MX31855 CS"
#define D_SENSOR_MAX31855_CLK "MX31855 CLK"
#define D_SENSOR_MAX31855_DO "MX31855 DO"
2020-08-23 11:24:35 +01:00
#define D_SENSOR_MAX31865_CS "MX31865 CS"
#define D_SENSOR_NRG_SEL "HLWBL SEL" // Suffix "i"
#define D_SENSOR_NRG_CF1 "HLWBL CF1"
#define D_SENSOR_HLW_CF "HLW8012 CF"
#define D_SENSOR_HJL_CF "BL0937 CF"
#define D_SENSOR_MCP39F5_TX "MCP39F5 Tx"
#define D_SENSOR_MCP39F5_RX "MCP39F5 Rx"
#define D_SENSOR_MCP39F5_RST "MCP39F5 Rst"
#define D_SENSOR_CSE7766_TX "CSE7766 Tx"
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
#define D_SENSOR_PN532_TX "PN532 Tx"
#define D_SENSOR_PN532_RX "PN532 Rx"
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
#define D_SENSOR_P9813_CLK "P9813 Clk"
#define D_SENSOR_P9813_DAT "P9813 Dat"
#define D_SENSOR_MY92X1_DI "MY92x1 DI"
#define D_SENSOR_MY92X1_DCKI "MY92x1 DCKI"
#define D_SENSOR_ARIRFRCV "ALux IrRcv"
#define D_SENSOR_ARIRFSEL "ALux IrSel"
#define D_SENSOR_TXD "Serial Tx"
#define D_SENSOR_RXD "Serial Rx"
#define D_SENSOR_ROTARY "Rotary" // Suffix "1A"
#define D_SENSOR_HRE_CLOCK "HRE Clock"
#define D_SENSOR_HRE_DATA "HRE Data"
#define D_SENSOR_ADE7953_IRQ "ADE7953 IRQ"
#define D_SENSOR_BUZZER "Buzzer"
#define D_SENSOR_OLED_RESET "OLED Reset"
#define D_SENSOR_ZIGBEE_TXD "Zigbee Tx"
#define D_SENSOR_ZIGBEE_RXD "Zigbee Rx"
2020-07-22 09:07:07 +01:00
#define D_SENSOR_ZIGBEE_RST "Zigbee Rst"
#define D_SENSOR_SOLAXX1_TX "SolaxX1 Tx"
#define D_SENSOR_SOLAXX1_RX "SolaxX1 Rx"
#define D_SENSOR_IBEACON_TX "iBeacon TX"
#define D_SENSOR_IBEACON_RX "iBeacon RX"
#define D_SENSOR_RDM6300_RX "RDM6300 RX"
#define D_SENSOR_CC1101_CS "CC1101 CS"
#define D_SENSOR_A4988_DIR "A4988 DIR"
#define D_SENSOR_A4988_STP "A4988 STP"
#define D_SENSOR_A4988_ENA "A4988 ENA"
#define D_SENSOR_A4988_MS1 "A4988 MS1"
#define D_SENSOR_OUTPUT_HI "Output Hi"
#define D_SENSOR_OUTPUT_LO "Output Lo"
#define D_SENSOR_AS608_TX "AS608 Tx"
#define D_SENSOR_AS608_RX "AS608 Rx"
#define D_SENSOR_DDS2382_TX "DDS238-2 Tx"
#define D_SENSOR_DDS2382_RX "DDS238-2 Rx"
#define D_SENSOR_DDSU666_TX "DDSU666 Tx"
#define D_SENSOR_DDSU666_RX "DDSU666 Rx"
#define D_SENSOR_SM2135_CLK "SM2135 Clk"
#define D_SENSOR_SM2135_DAT "SM2135 Dat"
#define D_SENSOR_DEEPSLEEP "DeepSleep"
#define D_SENSOR_EXS_ENABLE "EXS Enable"
#define D_SENSOR_CLIENT_TX "Client TX"
#define D_SENSOR_CLIENT_RX "Client RX"
#define D_SENSOR_CLIENT_RESET "Client RST"
2019-12-17 02:16:25 +00:00
#define D_SENSOR_GPS_RX "GPS RX"
#define D_SENSOR_GPS_TX "GPS TX"
2020-02-06 16:05:37 +00:00
#define D_SENSOR_HM10_RX "HM10 RX"
#define D_SENSOR_HM10_TX "HM10 TX"
#define D_SENSOR_LE01MR_RX "LE-01MR Rx"
#define D_SENSOR_LE01MR_TX "LE-01MR Tx"
#define D_SENSOR_BL0940_RX "BL0940 Rx"
2020-02-27 20:31:19 +00:00
#define D_SENSOR_CC1101_GDO0 "CC1101 GDO0"
#define D_SENSOR_CC1101_GDO2 "CC1101 GDO2"
#define D_SENSOR_HRXL_RX "HRXL Rx"
#define D_SENSOR_DYP_RX "DYP Rx"
2020-03-18 10:24:56 +00:00
#define D_SENSOR_ELECTRIQ_MOODL "MOODL Tx"
2020-05-05 17:36:12 +01:00
#define D_SENSOR_AS3935 "AS3935"
#define D_SENSOR_WINDMETER_SPEED "WindMeter Spd"
#define D_SENSOR_TELEINFO_RX "TInfo Rx"
#define D_SENSOR_TELEINFO_ENABLE "TInfo EN"
#define D_SENSOR_LMT01_PULSE "LMT01 Pulse"
#define D_SENSOR_ADC_INPUT "ADC Input"
#define D_SENSOR_ADC_TEMP "ADC Temp"
#define D_SENSOR_ADC_LIGHT "ADC Light"
#define D_SENSOR_ADC_BUTTON "ADC Button"
#define D_SENSOR_ADC_RANGE "ADC Range"
#define D_SENSOR_ADC_CT_POWER "ADC CT Power"
#define D_SENSOR_ADC_JOYSTICK "ADC Joystick"
2020-05-05 17:36:12 +01:00
#define D_GPIO_WEBCAM_PWDN "CAM_PWDN"
#define D_GPIO_WEBCAM_RESET "CAM_RESET"
#define D_GPIO_WEBCAM_XCLK "CAM_XCLK"
#define D_GPIO_WEBCAM_SIOD "CAM_SIOD"
#define D_GPIO_WEBCAM_SIOC "CAM_SIOC"
#define D_GPIO_WEBCAM_DATA "CAM_DATA"
#define D_GPIO_WEBCAM_VSYNC "CAM_VSYNC"
#define D_GPIO_WEBCAM_HREF "CAM_HREF"
#define D_GPIO_WEBCAM_PCLK "CAM_PCLK"
#define D_GPIO_WEBCAM_PSCLK "CAM_PSCLK"
#define D_GPIO_WEBCAM_HSD "CAM_HSD"
#define D_GPIO_WEBCAM_PSRCS "CAM_PSRCS"
#define D_SENSOR_ETH_PHY_POWER "ETH POWER"
#define D_SENSOR_ETH_PHY_MDC "ETH MDC"
#define D_SENSOR_ETH_PHY_MDIO "ETH MDIO"
#define D_SENSOR_TCP_TXD "TCP Tx"
#define D_SENSOR_TCP_RXD "TCP Rx"
#define D_SENSOR_IEM3000_TX "iEM3000 TX"
#define D_SENSOR_IEM3000_RX "iEM3000 RX"
#define D_SENSOR_MIEL_HVAC_TX "MiEl HVAC Tx"
#define D_SENSOR_MIEL_HVAC_RX "MiEl HVAC Rx"
#define D_SENSOR_SHELLY_DIMMER_BOOT0 "SHD Boot 0"
#define D_SENSOR_SHELLY_DIMMER_RST_INV "SHD Reset"
2020-11-30 11:52:59 +00:00
#define D_SENSOR_RC522_RST "RC522 Rst"
// Units
#define D_UNIT_AMPERE "А"
#define D_UNIT_CELSIUS "C"
#define D_UNIT_CENTIMETER "cm"
#define D_UNIT_DEGREE "°"
#define D_UNIT_FAHRENHEIT "F"
#define D_UNIT_HERTZ "Hz"
#define D_UNIT_HOUR "Ч"
#define D_UNIT_GALLONS "gal"
#define D_UNIT_GALLONS_PER_MIN "g/m"
#define D_UNIT_INCREMENTS "inc"
#define D_UNIT_KELVIN "K"
2020-04-11 00:48:37 +01:00
#define D_UNIT_KILOMETER "km"
#define D_UNIT_KILOGRAM "kg"
#define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h"
#define D_UNIT_KILOOHM "кОм"
#define D_UNIT_KILOWATTHOUR "кВт"
#define D_UNIT_LITERS "L"
#define D_UNIT_LITERS_PER_MIN "L/m"
#define D_UNIT_LUX "лк"
#define D_UNIT_MICROGRAM_PER_CUBIC_METER "мкг/м³"
#define D_UNIT_MICROMETER "мкм"
#define D_UNIT_MICROSECOND "мкс"
#define D_UNIT_MICROSIEMENS_PER_CM "µS/cm"
#define D_UNIT_MILLIAMPERE "мА"
#define D_UNIT_MILLILITERS "ml"
#define D_UNIT_MILLIMETER "mm"
#define D_UNIT_MILLIMETER_MERCURY "мм рт.ст."
#define D_UNIT_MILLISECOND "мс"
#define D_UNIT_MILLIVOLT "mV"
#define D_UNIT_MINUTE "мин"
#define D_UNIT_PARTS_PER_BILLION "ppb"
#define D_UNIT_PARTS_PER_DECILITER "ppd"
#define D_UNIT_PARTS_PER_MILLION "ppm"
#define D_UNIT_PERCENT "%%"
#define D_UNIT_PRESSURE "гПа"
#define D_UNIT_SECOND "сек"
#define D_UNIT_SECTORS "секторов"
#define D_UNIT_VA "VA"
#define D_UNIT_VAR "VAr"
#define D_UNIT_VOLT "В"
#define D_UNIT_WATT "Вт"
#define D_UNIT_WATTHOUR "ВтЧ"
#define D_UNIT_WATT_METER_QUADRAT "W/m²"
//SDM220, SDM120, LE01MR
#define D_PHASE_ANGLE "Угол фазы"
#define D_IMPORT_ACTIVE "Импорт активной мощности"
#define D_EXPORT_ACTIVE "Экспорт активной мощности"
#define D_IMPORT_REACTIVE "Импорт реактивной мощности"
#define D_EXPORT_REACTIVE "Экспорт реактивной мощности"
#define D_TOTAL_REACTIVE "Итого реактивная мощность"
#define D_UNIT_KWARH "kVArh"
#define D_UNIT_ANGLE "Град"
#define D_TOTAL_ACTIVE "Total Active"
//SOLAXX1
#define D_PV1_VOLTAGE "PV1 Voltage"
#define D_PV1_CURRENT "PV1 Current"
#define D_PV1_POWER "PV1 Power"
#define D_PV2_VOLTAGE "PV2 Voltage"
#define D_PV2_CURRENT "PV2 Current"
#define D_PV2_POWER "PV2 Power"
#define D_SOLAR_POWER "Solar Power"
#define D_INVERTER_POWER "Inverter Power"
#define D_STATUS "Status"
#define D_WAITING "Waiting"
#define D_CHECKING "Checking"
#define D_WORKING "Working"
#define D_FAILURE "Failure"
#define D_SOLAX_ERROR_0 "No Error Code"
#define D_SOLAX_ERROR_1 "Grid Lost Fault"
#define D_SOLAX_ERROR_2 "Grid Voltage Fault"
#define D_SOLAX_ERROR_3 "Grid Frequency Fault"
#define D_SOLAX_ERROR_4 "Pv Voltage Fault"
#define D_SOLAX_ERROR_5 "Isolation Fault"
#define D_SOLAX_ERROR_6 "Over Temperature Fault"
#define D_SOLAX_ERROR_7 "Fan Fault"
#define D_SOLAX_ERROR_8 "Other Device Fault"
//xdrv_10_scripter.ino
#define D_CONFIGURE_SCRIPT "Edit script"
#define D_SCRIPT "edit script"
#define D_SDCARD_UPLOAD "file upload"
#define D_SDCARD_DIR "sd card directory"
#define D_UPL_DONE "Done"
#define D_SCRIPT_CHARS_LEFT "chars left"
#define D_SCRIPT_CHARS_NO_MORE "no more chars"
#define D_SCRIPT_DOWNLOAD "Download"
#define D_SCRIPT_ENABLE "script enable"
#define D_SCRIPT_UPLOAD "Upload"
#define D_SCRIPT_UPLOAD_FILES "Upload files"
2020-04-25 23:43:50 +01:00
//xsns_67_as3935.ino
#define D_AS3935_GAIN "gain:"
#define D_AS3935_ENERGY "energy:"
#define D_AS3935_DISTANCE "distance:"
#define D_AS3935_DISTURBER "disturber:"
#define D_AS3935_VRMS "µVrms:"
#define D_AS3935_APRX "aprx.:"
#define D_AS3935_AWAY "away"
#define D_AS3935_LIGHT "lightning"
#define D_AS3935_OUT "lightning out of range"
#define D_AS3935_NOT "distance not determined"
#define D_AS3935_ABOVE "lightning overhead"
#define D_AS3935_NOISE "noise detected"
#define D_AS3935_DISTDET "disturber detected"
#define D_AS3935_INTNOEV "Interrupt with no Event!"
#define D_AS3935_FLICKER "IRQ flicker!"
#define D_AS3935_POWEROFF "Power Off"
2020-04-25 23:43:50 +01:00
#define D_AS3935_NOMESS "listening..."
#define D_AS3935_ON "On"
#define D_AS3935_OFF "Off"
#define D_AS3935_INDOORS "Indoors"
#define D_AS3935_OUTDOORS "Outdoors"
#define D_AS3935_CAL_FAIL "calibration failed"
#define D_AS3935_CAL_OK "calibration set to:"
2020-05-07 09:54:29 +01:00
//xsns_68_opentherm.ino
#define D_SENSOR_BOILER_OT_RX "OpenTherm RX"
#define D_SENSOR_BOILER_OT_TX "OpenTherm TX"
2020-08-10 16:42:31 +01:00
// xnrg_15_teleinfo Denky (Teleinfo)
#define D_CONTRACT "Contract"
#define D_POWER_LOAD "Power load"
#define D_CURRENT_TARIFF "Current Tariff"
#define D_TARIFF "Tariff"
#define D_OVERLOAD "ADPS"
#define D_MAX_POWER "Max Power"
#define D_MAX_CURRENT "Max Current"
// xsns_79_as608.ino
#define D_FP_ENROLL_PLACEFINGER "Place finger"
#define D_FP_ENROLL_REMOVEFINGER "Remove finger"
#define D_FP_ENROLL_PLACESAMEFINGER "Place same finger again"
#define D_FP_ENROLL_RETRY "Error so retry"
#define D_FP_ENROLL_RESTART "Restart"
#define D_FP_ENROLL_ERROR "Error"
#define D_FP_ENROLL_RESET "Reset"
#define D_FP_ENROLL_ACTIVE "Active"
#define D_FP_ENROLL_INACTIVE "Inactive"
// Indexed by Adafruit_Fingerprint.h defines
#define D_FP_PACKETRECIEVEERR "Comms error" // 0x01 Error when receiving data package
#define D_FP_NOFINGER "" // 0x02 No finger on the sensor
#define D_FP_IMAGEFAIL "Imaging error" // 0x03 Failed to enroll the finger
#define D_FP_IMAGEMESS "Image too messy" // 0x06 Failed to generate character file due to overly disorderly fingerprint image
#define D_FP_FEATUREFAIL "Fingerprint too small" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image
#define D_FP_NOMATCH "No match" // 0x08 Finger doesn't match
#define D_FP_NOTFOUND "Did not find a match" // 0x09 Failed to find matching finger
#define D_FP_ENROLLMISMATCH "Fingerprint did not match" // 0x0A Failed to combine the character files
#define D_FP_BADLOCATION "Bad location" // 0x0B Addressed PageID is beyond the finger library
#define D_FP_DBRANGEFAIL "DB range error" // 0x0C Error when reading template from library or invalid template
#define D_FP_UPLOADFEATUREFAIL "Upload feature error" // 0x0D Error when uploading template
#define D_FP_PACKETRESPONSEFAIL "Packet response error" // 0x0E Module failed to receive the following data packages
#define D_FP_UPLOADFAIL "Upload error" // 0x0F Error when uploading image
#define D_FP_DELETEFAIL "Delete error" // 0x10 Failed to delete the template
#define D_FP_DBCLEARFAIL "DB Clear error" // 0x11 Failed to clear finger library
#define D_FP_PASSFAIL "Password error" // 0x13 Find whether the fingerprint passed or failed
#define D_FP_INVALIDIMAGE "Image invalid" // 0x15 Failed to generate image because of lac of valid primary image
#define D_FP_FLASHERR "Flash write error" // 0x18 Error when writing flash
#define D_FP_INVALIDREG "Invalid number" // 0x1A Invalid register number
#define D_FP_ADDRCODE "Address code" // 0x20 Address code
#define D_FP_PASSVERIFY "Password verified" // 0x21 Verify the fingerprint passed
#define D_FP_UNKNOWNERROR "Error" // Any other error
#endif // _LANGUAGE_RU_RU_H_