Tasmota/tasmota/tasmota.ino

600 lines
26 KiB
Arduino
Raw Normal View History

2020-05-23 12:09:16 +01:00
/*
tasmota.ino - Tasmota firmware for iTead Sonoff, Wemos, NodeMCU, ESP8266 and ESP32 hardwares
2021-01-01 12:44:04 +00:00
Copyright (C) 2021 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
// Location specific includes
2020-11-01 14:24:12 +00:00
#ifndef ESP32_STAGE // ESP32 Stage has no core_version.h file. Disable include via PlatformIO Option
#include <core_version.h> // Arduino_Esp8266 version information (ARDUINO_ESP8266_RELEASE and ARDUINO_ESP8266_RELEASE_2_7_1)
2020-11-01 14:24:12 +00:00
#endif
#include "tasmota_compat.h"
2019-10-27 11:04:08 +00:00
#include "tasmota_version.h" // Tasmota version information
#include "tasmota.h" // Enumeration used in my_user_config.h
#include "my_user_config.h" // Fixed user configurable options
#ifdef USE_TLS
2020-04-10 09:52:22 +01:00
#include <t_bearssl.h> // We need to include before "tasmota_globals.h" to take precedence over the BearSSL version in Arduino
#endif // USE_TLS
2020-04-09 14:32:23 +01:00
#include "tasmota_globals.h" // Function prototypes and global configuration
#include "i18n.h" // Language support configured by my_user_config.h
2019-10-27 11:04:08 +00:00
#include "tasmota_template.h" // Hardware configuration
// Libraries
2018-11-20 14:00:24 +00:00
#include <ESP8266HTTPClient.h> // Ota
2017-01-28 13:41:01 +00:00
#include <ESP8266httpUpdate.h> // Ota
2021-11-23 21:15:08 +00:00
#ifdef ESP32
#include "HTTPUpdateLight.h" // Ota over HTTPS for ESP32
#endif
#include <StreamString.h> // Webserver, Updater
#include <ext_printf.h>
2021-01-25 15:02:56 +00:00
#include <SBuffer.hpp>
2021-11-06 08:37:40 +00:00
#include <LList.h>
2020-09-24 07:51:43 +01:00
#include <JsonParser.h>
#include <JsonGenerator.h>
#ifdef USE_ARDUINO_OTA
#include <ArduinoOTA.h> // Arduino OTA
#ifndef USE_DISCOVERY
#define USE_DISCOVERY
#endif
#endif // USE_ARDUINO_OTA
2017-01-28 13:41:01 +00:00
#ifdef USE_DISCOVERY
#include <ESP8266mDNS.h> // MQTT, Webserver, Arduino OTA
2017-01-28 13:41:01 +00:00
#endif // USE_DISCOVERY
//#ifdef USE_I2C
2017-01-28 13:41:01 +00:00
#include <Wire.h> // I2C support library
//#endif // USE_I2C
#ifdef USE_SPI
#include <SPI.h> // SPI support, TFT, SDcard
#endif // USE_SPI
2021-01-20 14:43:26 +00:00
#ifdef USE_UFILESYS
#ifdef ESP8266
#include <LittleFS.h>
#include <SPI.h>
#ifdef USE_SDCARD
#include <SD.h>
#include <SdFat.h>
2021-01-20 14:43:26 +00:00
#endif // USE_SDCARD
#endif // ESP8266
#ifdef ESP32
2021-07-18 22:14:10 +01:00
#include <LittleFS.h>
2021-01-20 14:43:26 +00:00
#ifdef USE_SDCARD
#include <SD.h>
#endif // USE_SDCARD
#include "FFat.h"
#include "FS.h"
#endif // ESP32
#endif // USE_UFILESYS
// Structs
#include "settings.h"
2017-01-28 13:41:01 +00:00
#ifdef CONFIG_IDF_TARGET_ESP32
#include "soc/efuse_reg.h"
#endif
2019-12-02 09:44:27 +00:00
/*********************************************************************************************\
* Global variables
\*********************************************************************************************/
const uint32_t VERSION_MARKER[] PROGMEM = { 0x5AA55AA5, 0xFFFFFFFF, 0xA55AA55A };
2018-08-27 15:07:23 +01:00
WiFiUDP PortUdp; // UDP Syslog and Alexa
2021-09-30 18:51:40 +01:00
struct TasmotaGlobal_t {
2020-10-29 11:21:24 +00:00
uint32_t global_update; // Timestamp of last global temperature and humidity update
2020-10-28 16:32:07 +00:00
uint32_t baudrate; // Current Serial baudrate
uint32_t pulse_timer[MAX_PULSETIMERS]; // Power off timer
uint32_t blink_timer; // Power cycle timer
2020-11-27 13:43:45 +00:00
uint32_t backlog_timer; // Timer for next command in backlog
2020-10-28 16:32:07 +00:00
uint32_t loop_load_avg; // Indicative loop load average
2020-12-18 15:30:37 +00:00
uint32_t log_buffer_pointer; // Index in log buffer
2020-10-28 16:32:07 +00:00
uint32_t uptime; // Counting every second until 4294967295 = 130 year
uint32_t zc_time; // Zero-cross moment (microseconds)
uint32_t zc_offset; // Zero cross moment offset due to monitoring chip processing (microseconds)
uint32_t zc_code_offset; // Zero cross moment offset due to executing power code (microseconds)
uint32_t zc_interval; // Zero cross interval around 8333 (60Hz) or 10000 (50Hz) (microseconds)
GpioOptionABits gpio_optiona; // GPIO Option_A flags
2021-01-01 16:04:36 +00:00
void *log_buffer_mutex; // Control access to log buffer
2020-10-28 16:32:07 +00:00
2021-06-11 17:14:12 +01:00
power_t power; // Current copy of Settings->power
2020-10-28 18:03:39 +00:00
power_t rel_inverted; // Relay inverted flag (1 = (0 = On, 1 = Off))
power_t last_power; // Last power set state
power_t blink_power; // Blink power state
power_t blink_powersave; // Blink start power save state
power_t blink_mask; // Blink relay active mask
2020-10-29 11:21:24 +00:00
int serial_in_byte_counter; // Index in receive buffer
2020-10-28 18:03:39 +00:00
float temperature_celsius; // Provide a global temperature to be used by some sensors
float humidity; // Provide a global humidity to be used by some sensors
float pressure_hpa; // Provide a global pressure to be used by some sensors
2020-10-29 12:58:50 +00:00
uint16_t gpio_pin[MAX_GPIO_PIN]; // GPIO functions indexed by pin number
2020-10-30 11:29:48 +00:00
myio my_module; // Active copy of Module GPIOs (17 x 16 bits)
2020-10-29 12:37:09 +00:00
uint16_t blink_counter; // Number of blink cycles
uint16_t seriallog_timer; // Timer to disable Seriallog
uint16_t syslog_timer; // Timer to re-enable syslog_level
uint16_t tele_period; // Tele period timer
2020-10-29 12:58:50 +00:00
int16_t save_data_counter; // Counter and flag for config save to Flash
RulesBitfield rules_flag; // Rule state flags (16 bits)
2020-10-29 12:37:09 +00:00
2020-10-30 11:29:48 +00:00
bool serial_local; // Handle serial locally
bool fallback_topic_flag; // Use Topic or FallbackTopic
bool backlog_nodelay; // Execute all backlog commands with no delay
2020-10-30 11:29:48 +00:00
bool backlog_mutex; // Command backlog pending
bool stop_flash_rotate; // Allow flash configuration rotation
bool blinkstate; // LED state
bool pwm_present; // Any PWM channel configured with SetOption15 0
bool i2c_enabled; // I2C configured
#ifdef ESP32
bool i2c_enabled_2; // I2C configured, second controller on ESP32, Wire1
#endif
2020-10-30 11:29:48 +00:00
bool ntp_force_sync; // Force NTP sync
bool skip_light_fade; // Temporarily skip light fading
bool restart_halt; // Do not restart but stay in wait loop
2020-11-01 11:12:27 +00:00
bool module_changed; // Indicate module changed since last restart
bool wifi_stay_asleep; // Allow sleep only incase of ESP32 BLE
2021-02-15 15:51:13 +00:00
bool no_autoexec; // Disable autoexec
bool enable_logging; // Enable logging
2020-10-30 11:29:48 +00:00
StateBitfield global_state; // Global states (currently Wifi and Mqtt) (8 bits)
2021-11-03 10:58:05 +00:00
uint8_t init_state; // Tasmota init state
uint8_t heartbeat_inverted; // Heartbeat pulse inverted flag
uint8_t spi_enabled; // SPI configured
uint8_t soft_spi_enabled; // Software SPI configured
2020-10-29 11:39:44 +00:00
uint8_t blinks; // Number of LED blinks
uint8_t restart_flag; // Tasmota restart flag
2020-10-29 11:58:22 +00:00
uint8_t ota_state_flag; // OTA state flag
2020-10-29 11:39:44 +00:00
uint8_t wifi_state_flag; // Wifi state flag
2020-10-29 12:58:50 +00:00
uint8_t mqtt_cmnd_blocked; // Ignore flag for publish command
uint8_t mqtt_cmnd_blocked_reset; // Count down to reset if needed
uint8_t state_250mS; // State 250msecond per second flag
uint8_t latching_relay_pulse; // Latching relay pulse timer
uint8_t active_device; // Active device in ExecuteCommandPower
2021-06-11 17:14:12 +01:00
uint8_t sleep; // Current copy of Settings->sleep
2020-10-30 11:29:48 +00:00
uint8_t leds_present; // Max number of LED supported
uint8_t led_inverted; // LED inverted flag (1 = (0 = On, 1 = Off))
uint8_t led_power; // LED power state
uint8_t ledlnk_inverted; // Link LED inverted flag (1 = (0 = On, 1 = Off))
uint8_t pwm_inverted; // PWM inverted flag (1 = inverted)
uint8_t energy_driver; // Energy monitor configured
uint8_t light_driver; // Light module configured
uint8_t light_type; // Light types
uint8_t serial_in_byte; // Received byte
uint8_t devices_present; // Max number of devices supported
uint8_t masterlog_level; // Master log level used to override set log level
2021-06-11 17:14:12 +01:00
uint8_t seriallog_level; // Current copy of Settings->seriallog_level
uint8_t syslog_level; // Current copy of Settings->syslog_level
2020-12-22 14:26:07 +00:00
uint8_t templog_level; // Temporary log level to be used by HTTP cm and Telegram
2021-06-11 17:14:12 +01:00
uint8_t module_type; // Current copy of Settings->module or user template type
2020-10-30 11:29:48 +00:00
uint8_t last_source; // Last command source
uint8_t shutters_present; // Number of actual define shutters
uint8_t discovery_counter; // Delayed discovery counter
#ifdef USE_PWM_DIMMER
uint8_t restore_powered_off_led_counter; // Seconds before powered-off LED (LEDLink) is restored
#endif // USE_PWM_DIMMER
2020-10-30 11:29:48 +00:00
#ifndef SUPPORT_IF_STATEMENT
uint8_t backlog_index; // Command backlog index
uint8_t backlog_pointer; // Command backlog pointer
String backlog[MAX_BACKLOG]; // Command backlog buffer
#endif
2020-10-29 11:21:24 +00:00
#ifdef MQTT_DATA_STRING
String mqtt_data; // Buffer filled by Response functions
#else
char mqtt_data[MESSZ]; // MQTT publish buffer
#endif
2020-10-30 11:29:48 +00:00
char version[16]; // Composed version string like 255.255.255.255
char image_name[33]; // Code image and/or commit
char hostname[33]; // Composed Wifi hostname
char serial_in_buffer[INPUT_BUFFER_SIZE]; // Receive buffer
char mqtt_client[99]; // Composed MQTT Clientname
char mqtt_topic[TOPSZ]; // Composed MQTT topic
#ifdef PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED
2021-06-11 17:14:12 +01:00
char* log_buffer = nullptr; // Log buffer in IRAM
#else
char log_buffer[LOG_BUFFER_SIZE]; // Log buffer in DRAM
#endif // PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED
2020-10-28 16:32:07 +00:00
} TasmotaGlobal;
2021-06-11 17:14:12 +01:00
TSettings* Settings = nullptr;
Support If in Rules The major features of IF statement are: - Support IF, ELSEIF, ELSE - Support not only comparison but also using logical expression as condition - Support run multiple commands - Support nested IF statement - All the commands run by IF statement will go to the BACKLOG! - No limit for logical operators, parenthesis and nested IF statement. Depends on your RAM! Extended Backus-Naur Form of IF statement: <if-statement> ::= IF "(" <logical-expression> ")" <statement-list> {ELSEIF "(" <logical-expression> ")" <statement-list>} [ELSE <statement-list>] ENDIF <logical-expression> := <comparison-expression> | (<comparison-expression> | <logical-expression>) {(AND | OR) <logical-expression>} | "(" <logical-expression ")" {(AND | OR) <logical expression>} <comparison-expression> ::= <math-expression> ("=" | "<" | ">" | "|" | "==" | "<=" | ">=" | "!=") <math-expression> <statement-list> ::= <statement> {";" <statement>} <statement> ::= <Sonoff-Tasmota-command> | <if-statement> In English: If statement support 3 format: 1. IF (<condition>) <statement-list> ENDIF 2. IF (<condition>) <statement-list> ELSE <statement-list> ENDIF 3. IF (<condition>) <statement-list> [ELSEIF (<condition>) <statement-list> ]* ELSE <statement-list> ENDIF <condition> is a logical expression which can be: 1. A comparison expression for example: VAR1 >= 10 2. Multiple comparison expression with logical operator "AND" or "OR" between them. "AND" has higher priority than "OR". Fox example: UPTIME > 100 AND MEM1 == 1 OR MEM2 == 1 3. Parenthesis can be used to change the priority of logical expression. For example: UPTIME > 100 AND (MEM1 == 1 OR MEM2 == 1) <statement-list> can be: 1. A Sonoff-Tasmota command. For example: ledpower on 2. A IF statement ("IF .... ENDIF") 3. Multiple Sonoff-Tasmota command or IF statement split with ";". For example: Power1 off; Ledpower on; if (mem1 == 0) Var1 Var1+1; mem1==1 endif; Delay 10; POWER1 on 4. Do not need to lead with "BACKLOG" for multiple commands.
2019-09-09 16:24:27 +01:00
#ifdef SUPPORT_IF_STATEMENT
#include <LinkedList.h>
LinkedList<String> backlog; // Command backlog implemented with LinkedList
Support If in Rules The major features of IF statement are: - Support IF, ELSEIF, ELSE - Support not only comparison but also using logical expression as condition - Support run multiple commands - Support nested IF statement - All the commands run by IF statement will go to the BACKLOG! - No limit for logical operators, parenthesis and nested IF statement. Depends on your RAM! Extended Backus-Naur Form of IF statement: <if-statement> ::= IF "(" <logical-expression> ")" <statement-list> {ELSEIF "(" <logical-expression> ")" <statement-list>} [ELSE <statement-list>] ENDIF <logical-expression> := <comparison-expression> | (<comparison-expression> | <logical-expression>) {(AND | OR) <logical-expression>} | "(" <logical-expression ")" {(AND | OR) <logical expression>} <comparison-expression> ::= <math-expression> ("=" | "<" | ">" | "|" | "==" | "<=" | ">=" | "!=") <math-expression> <statement-list> ::= <statement> {";" <statement>} <statement> ::= <Sonoff-Tasmota-command> | <if-statement> In English: If statement support 3 format: 1. IF (<condition>) <statement-list> ENDIF 2. IF (<condition>) <statement-list> ELSE <statement-list> ENDIF 3. IF (<condition>) <statement-list> [ELSEIF (<condition>) <statement-list> ]* ELSE <statement-list> ENDIF <condition> is a logical expression which can be: 1. A comparison expression for example: VAR1 >= 10 2. Multiple comparison expression with logical operator "AND" or "OR" between them. "AND" has higher priority than "OR". Fox example: UPTIME > 100 AND MEM1 == 1 OR MEM2 == 1 3. Parenthesis can be used to change the priority of logical expression. For example: UPTIME > 100 AND (MEM1 == 1 OR MEM2 == 1) <statement-list> can be: 1. A Sonoff-Tasmota command. For example: ledpower on 2. A IF statement ("IF .... ENDIF") 3. Multiple Sonoff-Tasmota command or IF statement split with ";". For example: Power1 off; Ledpower on; if (mem1 == 0) Var1 Var1+1; mem1==1 endif; Delay 10; POWER1 on 4. Do not need to lead with "BACKLOG" for multiple commands.
2019-09-09 16:24:27 +01:00
#define BACKLOG_EMPTY (backlog.size() == 0)
#else
2020-10-30 11:29:48 +00:00
#define BACKLOG_EMPTY (TasmotaGlobal.backlog_pointer == TasmotaGlobal.backlog_index)
Support If in Rules The major features of IF statement are: - Support IF, ELSEIF, ELSE - Support not only comparison but also using logical expression as condition - Support run multiple commands - Support nested IF statement - All the commands run by IF statement will go to the BACKLOG! - No limit for logical operators, parenthesis and nested IF statement. Depends on your RAM! Extended Backus-Naur Form of IF statement: <if-statement> ::= IF "(" <logical-expression> ")" <statement-list> {ELSEIF "(" <logical-expression> ")" <statement-list>} [ELSE <statement-list>] ENDIF <logical-expression> := <comparison-expression> | (<comparison-expression> | <logical-expression>) {(AND | OR) <logical-expression>} | "(" <logical-expression ")" {(AND | OR) <logical expression>} <comparison-expression> ::= <math-expression> ("=" | "<" | ">" | "|" | "==" | "<=" | ">=" | "!=") <math-expression> <statement-list> ::= <statement> {";" <statement>} <statement> ::= <Sonoff-Tasmota-command> | <if-statement> In English: If statement support 3 format: 1. IF (<condition>) <statement-list> ENDIF 2. IF (<condition>) <statement-list> ELSE <statement-list> ENDIF 3. IF (<condition>) <statement-list> [ELSEIF (<condition>) <statement-list> ]* ELSE <statement-list> ENDIF <condition> is a logical expression which can be: 1. A comparison expression for example: VAR1 >= 10 2. Multiple comparison expression with logical operator "AND" or "OR" between them. "AND" has higher priority than "OR". Fox example: UPTIME > 100 AND MEM1 == 1 OR MEM2 == 1 3. Parenthesis can be used to change the priority of logical expression. For example: UPTIME > 100 AND (MEM1 == 1 OR MEM2 == 1) <statement-list> can be: 1. A Sonoff-Tasmota command. For example: ledpower on 2. A IF statement ("IF .... ENDIF") 3. Multiple Sonoff-Tasmota command or IF statement split with ";". For example: Power1 off; Ledpower on; if (mem1 == 0) Var1 Var1+1; mem1==1 endif; Delay 10; POWER1 on 4. Do not need to lead with "BACKLOG" for multiple commands.
2019-09-09 16:24:27 +01:00
#endif
2018-11-24 16:16:27 +00:00
/*********************************************************************************************\
2019-12-02 09:44:27 +00:00
* Main
\*********************************************************************************************/
void setup(void) {
#ifdef ESP32
2020-04-18 15:34:29 +01:00
#ifdef DISABLE_ESP32_BROWNOUT
DisableBrownout(); // Workaround possible weak LDO resulting in brownout detection during Wifi connection
#endif // DISABLE_ESP32_BROWNOUT
#ifdef CONFIG_IDF_TARGET_ESP32
// restore GPIO16/17 if no PSRAM is found
if (!FoundPSRAM()) {
// test if the CPU is not pico
uint32_t chip_ver = REG_GET_FIELD(EFUSE_BLK0_RDATA3_REG, EFUSE_RD_CHIP_VER_PKG);
uint32_t pkg_version = chip_ver & 0x7;
if (pkg_version <= 3) { // D0WD, S0WD, D2WD
gpio_reset_pin(GPIO_NUM_16);
gpio_reset_pin(GPIO_NUM_17);
}
}
#endif // CONFIG_IDF_TARGET_ESP32
#endif // ESP32
2020-12-17 15:41:04 +00:00
RtcPreInit();
SettingsInit();
2020-12-17 15:41:04 +00:00
#ifdef USE_EMERGENCY_RESET
EmergencyReset();
#endif // USE_EMERGENCY_RESET
2020-10-28 16:32:07 +00:00
memset(&TasmotaGlobal, 0, sizeof(TasmotaGlobal));
TasmotaGlobal.baudrate = APP_BAUDRATE;
2020-12-07 16:03:22 +00:00
TasmotaGlobal.seriallog_timer = SERIALLOG_TIMER;
2020-10-28 18:03:39 +00:00
TasmotaGlobal.temperature_celsius = NAN;
2020-10-29 11:39:44 +00:00
TasmotaGlobal.blinks = 201;
TasmotaGlobal.wifi_state_flag = WIFI_RESTART;
2020-10-29 12:37:09 +00:00
TasmotaGlobal.tele_period = 9999;
2020-10-29 12:58:50 +00:00
TasmotaGlobal.active_device = 1;
2020-10-30 11:29:48 +00:00
TasmotaGlobal.global_state.data = 0xF; // Init global state (wifi_down, mqtt_down) to solve possible network issues
TasmotaGlobal.enable_logging = 1;
2020-04-18 15:34:29 +01:00
RtcRebootLoad();
if (!RtcRebootValid()) {
RtcReboot.fast_reboot_count = 0;
}
2020-07-15 15:09:32 +01:00
#ifdef FIRMWARE_MINIMAL
RtcReboot.fast_reboot_count = 0; // Disable fast reboot and quick power cycle detection
2020-07-15 15:09:32 +01:00
#else
if (ResetReason() == REASON_DEEP_SLEEP_AWAKE) {
RtcReboot.fast_reboot_count = 0; // Disable fast reboot and quick power cycle detection
} else {
RtcReboot.fast_reboot_count++;
}
2020-07-15 15:09:32 +01:00
#endif
RtcRebootSave();
2021-01-05 10:49:13 +00:00
if (RtcSettingsLoad(0)) {
uint32_t baudrate = (RtcSettings.baudrate / 300) * 300; // Make it a valid baudrate
if (baudrate) { TasmotaGlobal.baudrate = baudrate; }
}
2020-10-28 16:32:07 +00:00
Serial.begin(TasmotaGlobal.baudrate);
Serial.println();
// Serial.setRxBufferSize(INPUT_BUFFER_SIZE); // Default is 256 chars
2020-10-30 11:29:48 +00:00
TasmotaGlobal.seriallog_level = LOG_LEVEL_INFO; // Allow specific serial messages until config loaded
2017-01-28 13:41:01 +00:00
#ifdef PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED
ESP.setIramHeap();
2021-06-11 17:14:12 +01:00
Settings = (TSettings*)malloc(sizeof(TSettings)); // Allocate in "new" 16k heap space
TasmotaGlobal.log_buffer = (char*)malloc(LOG_BUFFER_SIZE); // Allocate in "new" 16k heap space
ESP.resetHeap();
if (TasmotaGlobal.log_buffer == nullptr) {
TasmotaGlobal.log_buffer = (char*)malloc(LOG_BUFFER_SIZE); // Allocate in "old" heap space as fallback
}
if (TasmotaGlobal.log_buffer != nullptr) {
TasmotaGlobal.log_buffer[0] = '\0';
}
#endif // PIO_FRAMEWORK_ARDUINO_MMU_CACHE16_IRAM48_SECHEAP_SHARED
2021-06-11 17:14:12 +01:00
if (Settings == nullptr) {
Settings = (TSettings*)malloc(sizeof(TSettings));
}
// AddLog(LOG_LEVEL_INFO, PSTR("ADR: Settings %p, Log %p"), Settings, TasmotaGlobal.log_buffer);
2021-09-01 22:06:39 +01:00
#ifdef ESP32
AddLog(LOG_LEVEL_INFO, PSTR("HDW: %s %s"), GetDeviceHardware().c_str(),
FoundPSRAM() ? (CanUsePSRAM() ? "(PSRAM)" : "(PSRAM disabled)") : "" );
AddLog(LOG_LEVEL_DEBUG, PSTR("HDW: FoundPSRAM=%i CanUsePSRAM=%i"), FoundPSRAM(), CanUsePSRAM());
2021-09-01 22:06:39 +01:00
#if !defined(HAS_PSRAM_FIX)
if (FoundPSRAM() && !CanUsePSRAM()) {
AddLog(LOG_LEVEL_INFO, PSTR("HDW: PSRAM is disabled, requires specific compilation on this hardware (see doc)"));
}
2021-09-01 22:06:39 +01:00
#endif
#else // ESP32
AddLog(LOG_LEVEL_INFO, PSTR("HDW: %s"), GetDeviceHardware().c_str());
#endif // ESP32
2021-04-21 10:55:52 +01:00
#ifdef USE_UFILESYS
UfsInit(); // xdrv_50_filesystem.ino
#endif
SettingsLoad();
SettingsDelta();
2017-01-28 13:41:01 +00:00
OsWatchInit();
2021-06-11 17:14:12 +01:00
TasmotaGlobal.seriallog_level = Settings->seriallog_level;
TasmotaGlobal.syslog_level = Settings->syslog_level;
2020-12-07 16:03:22 +00:00
2021-06-11 17:14:12 +01:00
TasmotaGlobal.module_changed = (Settings->module != Settings->last_module);
if (TasmotaGlobal.module_changed) {
2021-06-11 17:14:12 +01:00
Settings->baudrate = APP_BAUDRATE / 300;
Settings->serial_config = TS_SERIAL_8N1;
}
SetSerialBaudrate(Settings->baudrate * 300); // Reset serial interface if current baudrate is different from requested baudrate
2020-12-07 16:03:22 +00:00
if (1 == RtcReboot.fast_reboot_count) { // Allow setting override only when all is well
UpdateQuickPowerCycle(true);
}
if (ResetReason() != REASON_DEEP_SLEEP_AWAKE) {
#ifdef ESP8266
2021-06-11 17:14:12 +01:00
Settings->flag4.network_wifi = 1; // Make sure we're in control
#endif
#ifdef ESP32
2021-06-11 17:14:12 +01:00
if (!Settings->flag4.network_ethernet) {
Settings->flag4.network_wifi = 1; // Make sure we're in control
}
#endif
}
2021-06-11 17:14:12 +01:00
TasmotaGlobal.stop_flash_rotate = Settings->flag.stop_flash_rotate; // SetOption12 - Switch between dynamic or fixed slot flash save location
TasmotaGlobal.save_data_counter = Settings->save_data;
TasmotaGlobal.sleep = Settings->sleep;
#ifndef USE_EMULATION
2021-06-11 17:14:12 +01:00
Settings->flag2.emulation = 0;
#else
#ifndef USE_EMULATION_WEMO
2021-06-11 17:14:12 +01:00
if (EMUL_WEMO == Settings->flag2.emulation) { Settings->flag2.emulation = 0; }
#endif
#ifndef USE_EMULATION_HUE
2021-06-11 17:14:12 +01:00
if (EMUL_HUE == Settings->flag2.emulation) { Settings->flag2.emulation = 0; }
#endif
#endif // USE_EMULATION
2017-01-28 13:41:01 +00:00
2020-10-28 16:32:07 +00:00
// AddLogBuffer(LOG_LEVEL_DEBUG, (uint8_t*)&TasmotaGlobal, sizeof(TasmotaGlobal));
2021-06-11 17:14:12 +01:00
if (Settings->param[P_BOOT_LOOP_OFFSET]) { // SetOption36
// Disable functionality as possible cause of fast restart within BOOT_LOOP_TIME seconds (Exception, WDT or restarts)
2021-06-11 17:14:12 +01:00
if (RtcReboot.fast_reboot_count > Settings->param[P_BOOT_LOOP_OFFSET]) { // Restart twice
Settings->flag3.user_esp8285_enable = 0; // SetOption51 - Enable ESP8285 user GPIO's - Disable ESP8285 Generic GPIOs interfering with flash SPI
if (RtcReboot.fast_reboot_count > Settings->param[P_BOOT_LOOP_OFFSET] +1) { // Restart 3 times
for (uint32_t i = 0; i < MAX_RULE_SETS; i++) {
2021-06-11 17:14:12 +01:00
if (bitRead(Settings->rule_stop, i)) {
bitWrite(Settings->rule_enabled, i, 0); // Disable rules causing boot loop
}
}
}
2021-06-11 17:14:12 +01:00
if (RtcReboot.fast_reboot_count > Settings->param[P_BOOT_LOOP_OFFSET] +2) { // Restarted 4 times
Settings->rule_enabled = 0; // Disable all rules
2021-02-15 15:51:13 +00:00
TasmotaGlobal.no_autoexec = true;
}
2021-06-11 17:14:12 +01:00
if (RtcReboot.fast_reboot_count > Settings->param[P_BOOT_LOOP_OFFSET] +3) { // Restarted 5 times
for (uint32_t i = 0; i < nitems(Settings->my_gp.io); i++) {
Settings->my_gp.io[i] = GPIO_NONE; // Reset user defined GPIO disabling sensors
}
}
2021-06-11 17:14:12 +01:00
if (RtcReboot.fast_reboot_count > Settings->param[P_BOOT_LOOP_OFFSET] +4) { // Restarted 6 times
Settings->module = Settings->fallback_module; // Reset module to fallback module
// Settings->last_module = Settings->fallback_module;
}
2021-01-23 15:26:23 +00:00
AddLog(LOG_LEVEL_INFO, PSTR("FRC: " D_LOG_SOME_SETTINGS_RESET " (%d)"), RtcReboot.fast_reboot_count);
}
}
2021-05-23 15:50:17 +01:00
memcpy_P(TasmotaGlobal.version, VERSION_MARKER, 1); // Dummy for compiler saving VERSION_MARKER
snprintf_P(TasmotaGlobal.version, sizeof(TasmotaGlobal.version), PSTR("%d.%d.%d"), VERSION >> 24 & 0xff, VERSION >> 16 & 0xff, VERSION >> 8 & 0xff); // Release version 6.3.0
if (VERSION & 0xff) { // Development or patched version 6.3.0.10
snprintf_P(TasmotaGlobal.version, sizeof(TasmotaGlobal.version), PSTR("%s.%d"), TasmotaGlobal.version, VERSION & 0xff);
}
// Thehackbox inserts "release" or "commit number" before compiling using sed -i -e 's/PSTR("(%s)")/PSTR("(85cff52-%s)")/g' tasmota.ino
2021-01-18 20:48:04 +00:00
snprintf_P(TasmotaGlobal.image_name, sizeof(TasmotaGlobal.image_name), PSTR("(%s)"), PSTR(CODE_IMAGE_STR)); // Results in (85cff52-tasmota) or (release-tasmota)
2020-10-30 11:29:48 +00:00
Format(TasmotaGlobal.mqtt_client, SettingsText(SET_MQTT_CLIENT), sizeof(TasmotaGlobal.mqtt_client));
Format(TasmotaGlobal.mqtt_topic, SettingsText(SET_MQTT_TOPIC), sizeof(TasmotaGlobal.mqtt_topic));
if (strchr(SettingsText(SET_HOSTNAME), '%') != nullptr) {
SettingsUpdateText(SET_HOSTNAME, WIFI_HOSTNAME);
2020-10-30 11:29:48 +00:00
snprintf_P(TasmotaGlobal.hostname, sizeof(TasmotaGlobal.hostname)-1, SettingsText(SET_HOSTNAME), TasmotaGlobal.mqtt_topic, ESP_getChipId() & 0x1FFF);
2017-01-28 13:41:01 +00:00
} else {
2020-10-30 11:29:48 +00:00
snprintf_P(TasmotaGlobal.hostname, sizeof(TasmotaGlobal.hostname)-1, SettingsText(SET_HOSTNAME));
2017-01-28 13:41:01 +00:00
}
char *s = TasmotaGlobal.hostname;
while (*s) {
2021-07-26 14:10:47 +01:00
if (!(isalnum(*s) || ('.' == *s))) { *s = '-'; } // Valid hostname chars are A..Z, a..z, 0..9, . and -
if ((s == TasmotaGlobal.hostname) && ('-' == *s)) { *s = 'x'; } // First char cannot be a dash so replace by an x
s++;
}
snprintf_P(TasmotaGlobal.mqtt_topic, sizeof(TasmotaGlobal.mqtt_topic), ResolveToken(TasmotaGlobal.mqtt_topic).c_str());
2021-03-15 14:51:31 +00:00
RtcInit();
GpioInit();
2021-04-06 14:23:07 +01:00
ButtonInit();
SwitchInit();
#ifdef ROTARY_V1
RotaryInit();
#endif // ROTARY_V1
2021-05-25 17:53:10 +01:00
#ifdef USE_BERRY
BerryInit();
#endif // USE_BERRY
2021-04-06 14:23:07 +01:00
XdrvCall(FUNC_PRE_INIT);
XsnsCall(FUNC_PRE_INIT);
2021-11-03 10:58:05 +00:00
TasmotaGlobal.init_state = INIT_GPIOS;
2021-04-06 14:23:07 +01:00
SetPowerOnState();
WifiConnect();
2017-01-28 13:41:01 +00:00
AddLog(LOG_LEVEL_INFO, PSTR(D_PROJECT " %s - %s " D_VERSION " %s%s-" ARDUINO_CORE_RELEASE "(%s)"),
2021-01-18 20:48:04 +00:00
PSTR(PROJECT), SettingsText(SET_DEVICENAME), TasmotaGlobal.version, TasmotaGlobal.image_name, GetBuildDateAndTime().c_str());
#ifdef FIRMWARE_MINIMAL
2021-01-23 15:26:23 +00:00
AddLog(LOG_LEVEL_INFO, PSTR(D_WARNING_MINIMAL_VERSION));
#endif // FIRMWARE_MINIMAL
#ifdef USE_ARDUINO_OTA
ArduinoOTAInit();
#endif // USE_ARDUINO_OTA
XdrvCall(FUNC_INIT);
XsnsCall(FUNC_INIT);
2020-06-16 09:36:16 +01:00
#ifdef USE_SCRIPT
2021-06-11 17:14:12 +01:00
if (bitRead(Settings->rule_enabled, 0)) Run_Scripter(">BS",3,0);
2020-06-16 09:36:16 +01:00
#endif
2020-10-29 12:58:50 +00:00
TasmotaGlobal.rules_flag.system_init = 1;
2017-01-28 13:41:01 +00:00
}
void BacklogLoop(void) {
2020-11-27 13:43:45 +00:00
if (TimeReached(TasmotaGlobal.backlog_timer)) {
2020-10-30 11:29:48 +00:00
if (!BACKLOG_EMPTY && !TasmotaGlobal.backlog_mutex) {
TasmotaGlobal.backlog_mutex = true;
bool nodelay = false;
bool nodelay_detected = false;
String cmd;
do {
#ifdef SUPPORT_IF_STATEMENT
cmd = backlog.shift();
#else
2020-10-30 11:29:48 +00:00
cmd = TasmotaGlobal.backlog[TasmotaGlobal.backlog_pointer];
TasmotaGlobal.backlog[TasmotaGlobal.backlog_pointer] = (const char*) nullptr; // Force deallocation of the String internal memory
TasmotaGlobal.backlog_pointer++;
if (TasmotaGlobal.backlog_pointer >= MAX_BACKLOG) { TasmotaGlobal.backlog_pointer = 0; }
#endif
nodelay_detected = !strncasecmp_P(cmd.c_str(), PSTR(D_CMND_NODELAY), strlen(D_CMND_NODELAY));
if (nodelay_detected) { nodelay = true; }
2020-10-15 14:33:17 +01:00
} while (!BACKLOG_EMPTY && nodelay_detected);
2020-10-28 16:32:07 +00:00
if (!nodelay_detected) {
ExecuteCommand((char*)cmd.c_str(), SRC_BACKLOG);
}
if (nodelay || TasmotaGlobal.backlog_nodelay) {
2020-11-27 13:43:45 +00:00
TasmotaGlobal.backlog_timer = millis(); // Reset backlog_timer which has been set by ExecuteCommand (CommandHandler)
2020-10-28 16:32:07 +00:00
}
2020-10-30 11:29:48 +00:00
TasmotaGlobal.backlog_mutex = false;
}
if (BACKLOG_EMPTY) {
TasmotaGlobal.backlog_nodelay = false;
}
}
}
void SleepDelay(uint32_t mseconds) {
if (!TasmotaGlobal.backlog_nodelay && mseconds) {
uint32_t wait = millis() + mseconds;
2021-01-04 11:47:00 +00:00
while (!TimeReached(wait) && !Serial.available()) { // We need to service serial buffer ASAP as otherwise we get uart buffer overrun
2021-01-04 11:31:05 +00:00
delay(1);
}
} else {
delay(0);
}
}
2021-01-10 16:46:30 +00:00
void Scheduler(void) {
XdrvCall(FUNC_LOOP);
XsnsCall(FUNC_LOOP);
2021-01-10 16:46:30 +00:00
// check LEAmDNS.h
// MDNS.update() needs to be called in main loop
#ifdef ESP8266 // Not needed with esp32 mdns
#ifdef USE_DISCOVERY
#ifdef USE_WEBSERVER
#ifdef WEBSERVER_ADVERTISE
MdnsUpdate();
#endif // WEBSERVER_ADVERTISE
#endif // USE_WEBSERVER
#endif // USE_DISCOVERY
#endif // ESP8266
OsWatchLoop();
ButtonLoop();
SwitchLoop();
#ifdef USE_DEVICE_GROUPS
DeviceGroupsLoop();
#endif // USE_DEVICE_GROUPS
BacklogLoop();
static uint32_t state_50msecond = 0; // State 50msecond timer
if (TimeReached(state_50msecond)) {
SetNextTimeInterval(state_50msecond, 50);
2020-07-01 09:22:20 +01:00
#ifdef ROTARY_V1
RotaryHandler();
2020-07-01 09:24:46 +01:00
#endif // ROTARY_V1
XdrvCall(FUNC_EVERY_50_MSECOND);
XsnsCall(FUNC_EVERY_50_MSECOND);
}
2020-10-28 11:40:52 +00:00
static uint32_t state_100msecond = 0; // State 100msecond timer
if (TimeReached(state_100msecond)) {
SetNextTimeInterval(state_100msecond, 100);
Every100mSeconds();
XdrvCall(FUNC_EVERY_100_MSECOND);
XsnsCall(FUNC_EVERY_100_MSECOND);
}
2020-10-28 11:40:52 +00:00
static uint32_t state_250msecond = 0; // State 250msecond timer
if (TimeReached(state_250msecond)) {
SetNextTimeInterval(state_250msecond, 250);
Every250mSeconds();
XdrvCall(FUNC_EVERY_250_MSECOND);
XsnsCall(FUNC_EVERY_250_MSECOND);
2019-10-18 11:47:22 +01:00
}
2020-10-28 11:40:52 +00:00
static uint32_t state_second = 0; // State second timer
2019-10-18 11:47:22 +01:00
if (TimeReached(state_second)) {
SetNextTimeInterval(state_second, 1000);
PerformEverySecond();
XdrvCall(FUNC_EVERY_SECOND);
XsnsCall(FUNC_EVERY_SECOND);
}
2020-10-30 11:29:48 +00:00
if (!TasmotaGlobal.serial_local) { SerialInput(); }
2017-01-28 13:41:01 +00:00
#ifdef USE_ARDUINO_OTA
ArduinoOtaLoop();
#endif // USE_ARDUINO_OTA
2021-01-10 16:46:30 +00:00
}
void loop(void) {
uint32_t my_sleep = millis();
Scheduler();
uint32_t my_activity = millis() - my_sleep;
2021-06-11 17:14:12 +01:00
if (Settings->flag3.sleep_normal) { // SetOption60 - Enable normal sleep instead of dynamic sleep
// yield(); // yield == delay(0), delay contains yield, auto yield in loop
SleepDelay(TasmotaGlobal.sleep); // https://github.com/esp8266/Arduino/issues/2021
} else {
2020-10-29 15:16:34 +00:00
if (my_activity < (uint32_t)TasmotaGlobal.sleep) {
SleepDelay((uint32_t)TasmotaGlobal.sleep - my_activity); // Provide time for background tasks like wifi
2018-12-01 16:47:25 +00:00
} else {
2020-10-30 11:29:48 +00:00
if (TasmotaGlobal.global_state.network_down) {
SleepDelay(my_activity /2); // If wifi down and my_activity > setoption36 then force loop delay to 1/2 of my_activity period
2018-12-01 16:47:25 +00:00
}
}
}
if (!my_activity) { my_activity++; } // We cannot divide by 0
2020-10-29 15:16:34 +00:00
uint32_t loop_delay = TasmotaGlobal.sleep;
if (!loop_delay) { loop_delay++; } // We cannot divide by 0
uint32_t loops_per_second = 1000 / loop_delay; // We need to keep track of this many loops per second
uint32_t this_cycle_ratio = 100 * my_activity / loop_delay;
2020-10-28 16:32:07 +00:00
TasmotaGlobal.loop_load_avg = TasmotaGlobal.loop_load_avg - (TasmotaGlobal.loop_load_avg / loops_per_second) + (this_cycle_ratio / loops_per_second); // Take away one loop average away and add the new one
2017-08-08 15:08:08 +01:00
}