2019-12-17 02:09:34 +00:00
/*
cs - CZ . h - localization for Czech with diacritics - Czech for Tasmota
2021-01-01 12:44:04 +00:00
Copyright ( C ) 2021 Vladimír Synek
2019-12-17 02:09:34 +00:00
This program is free software : you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation , either version 3 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
# ifndef _LANGUAGE_CS_CZ_H_
# define _LANGUAGE_CS_CZ_H_
/*************************** ATTENTION *******************************\
*
* Due to memory constraints only UTF - 8 is supported .
* To save code space keep text as short as possible .
* Time and Date provided by SDK can not be localized ( yet ) .
* Use online command StateText to translate ON , OFF , HOLD and TOGGLE .
* Use online command Prefix to translate cmnd , stat and tele .
*
* Updated until v6 .5 .0 .9
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
//#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
# define LANGUAGE_LCID 1029
// HTML (ISO 639-1) Language Code
# define D_HTML_LANGUAGE "cs"
// "2017-03-07T11:08:02" - ISO8601:2004
# define D_YEAR_MONTH_SEPARATOR "-"
# define D_MONTH_DAY_SEPARATOR "-"
# define D_DATE_TIME_SEPARATOR "T"
# define D_HOUR_MINUTE_SEPARATOR ":"
# define D_MINUTE_SECOND_SEPARATOR ":"
# define D_DAY3LIST "Ne Po Út St Čt Pá So "
# define D_MONTH3LIST "LedÚnoBřeDubKvěČvnČvcSrpZářŘíjLisPro"
// Non JSON decimal separator
# define D_DECIMAL_SEPARATOR ","
// Common
# define D_ADMIN "Admin"
# define D_AIR_QUALITY "Kvalita vzduchu"
# define D_AP "AP" // Access Point
# define D_AS "jako"
# define D_AUTO "AUTO"
2020-06-29 10:53:31 +01:00
# define D_BATT "Batt" // Short for Battery
2019-12-17 02:09:34 +00:00
# define D_BLINK "Blikání"
# define D_BLINKOFF "BlikáníVyp"
# define D_BOOT_COUNT "Počítadlo spuštění"
# define D_BRIGHTLIGHT "Světlý"
# define D_BSSID "BSSId"
# define D_BUTTON "Tlačítko"
# define D_BY "by" // Written by me
# define D_BYTES "Bytů"
# define D_CELSIUS "°C"
# define D_CHANNEL "Channel"
# define D_CO2 "CO2"
# define D_CODE "kód" // Button code
# define D_COLDLIGHT "Studené světlo"
# define D_COMMAND "Příkaz"
# define D_CONNECTED "...připojeno"
# define D_CORS_DOMAIN "CORS Domain"
# define D_COUNT "Počítej"
# define D_COUNTER "Počítadlo"
2019-12-30 15:42:53 +00:00
# define D_CT_POWER "CT Power"
2019-12-17 02:09:34 +00:00
# define D_CURRENT "Proud" // As in Voltage and Current
# define D_DATA "Data"
# define D_DARKLIGHT "Tmavý"
# define D_DEBUG "Debug"
2020-03-16 15:52:22 +00:00
# define D_DEWPOINT "Dew point"
2019-12-17 02:09:34 +00:00
# define D_DISABLED "Zablokováno"
# define D_DISTANCE "Distance"
# define D_DNS_SERVER "Server DNS"
2020-11-02 08:26:35 +00:00
# define D_DO "Disolved Oxygen"
2019-12-17 02:09:34 +00:00
# define D_DONE "Provedeno"
# define D_DST_TIME "DST"
2020-10-24 08:54:25 +01:00
# define D_EC "EC"
2019-12-30 17:44:08 +00:00
# define D_ECO2 "eCO₂"
2019-12-17 02:09:34 +00:00
# define D_EMULATION "Emulace"
# define D_ENABLED "Otevřený"
# define D_ERASE "Smaž"
# define D_ERROR "Chyba"
# define D_FAHRENHEIT "Fahrenheita"
# define D_FAILED "chyba"
# define D_FALLBACK "Záložní"
# define D_FALLBACK_TOPIC "Záložní topic"
# define D_FALSE "Nepravda"
# define D_FILE "Soubor"
# define D_FLOW_RATE "Flow rate"
# define D_FREE_MEMORY "Volná paměť"
2020-05-12 13:19:10 +01:00
# define D_PSR_MAX_MEMORY "PS-RAM Memory"
# define D_PSR_FREE_MEMORY "PS-RAM free Memory"
2019-12-17 02:09:34 +00:00
# define D_FREQUENCY "Kmitočet"
# define D_GAS "Plyn"
# define D_GATEWAY "Výchozí brána"
# define D_GROUP "Skupina"
# define D_HOST "Server"
# define D_HOSTNAME "Název serveru"
# define D_HUMIDITY "Vlhkost"
# define D_ILLUMINANCE "Osvětlení"
# define D_IMMEDIATE "Okamžité" // Button immediate
# define D_INDEX "Index"
# define D_INFO "Informace"
# define D_INFRARED "Infrared"
# define D_INITIALIZED "Inicializovaný"
# define D_IP_ADDRESS "Adresa IP"
# define D_LIGHT "Světlo"
# define D_LWT "LWT"
2020-06-29 10:53:31 +01:00
# define D_LQI "LQI" // Zigbee Link Quality Index
2019-12-17 02:09:34 +00:00
# define D_MODULE "Modul"
2019-12-24 01:22:29 +00:00
# define D_MOISTURE "Moisture"
2019-12-17 02:09:34 +00:00
# define D_MQTT "MQTT"
# define D_MULTI_PRESS "několikeré-stisknutí"
# define D_NOISE "Hluk"
# define D_NONE "Žádný"
2020-10-27 10:38:54 +00:00
# define D_O2 "Oxygen"
2019-12-17 02:09:34 +00:00
# define D_OFF "Vyp."
2020-09-26 16:41:13 +01:00
# define D_OFFLINE "Offline" // Don't translate, LWT message! Nepředkládat, LWT zpráva!
2019-12-17 02:09:34 +00:00
# define D_OK "OK"
# define D_ON "Zap."
2020-09-26 16:41:13 +01:00
# define D_ONLINE "Online" // Don't translate, LWT message! Nepředkládat, LWT zpráva!
2020-10-18 13:43:40 +01:00
# define D_ORP "ORP"
2019-12-17 02:09:34 +00:00
# define D_PASSWORD "Heslo"
2020-10-18 13:43:40 +01:00
# define D_PH "pH"
2019-12-17 02:09:34 +00:00
# define D_PORT "Port"
# define D_POWER_FACTOR "Účiník"
# define D_POWERUSAGE "Příkon"
# define D_POWERUSAGE_ACTIVE "Činný příkon"
# define D_POWERUSAGE_APPARENT "Zdánlivý příkon"
# define D_POWERUSAGE_REACTIVE "Jalový příkon"
# define D_PRESSURE "Tlak"
# define D_PRESSUREATSEALEVEL "Tlak na hladině moře"
# define D_PROGRAM_FLASH_SIZE "Velikost paměti flash"
# define D_PROGRAM_SIZE "Velikost programu"
# define D_PROJECT "Projekt"
# define D_RAIN "Rain"
2020-01-23 22:17:15 +00:00
# define D_RANGE "Range"
2019-12-17 02:09:34 +00:00
# define D_RECEIVED "Přijatý"
# define D_RESTART "Restart"
# define D_RESTARTING "Restartování"
# define D_RESTART_REASON "Příčina restartu"
# define D_RESTORE "Obnovit"
# define D_RETAINED "Zachováno"
# define D_RULE "Rule"
# define D_SAVE "Ulož"
# define D_SENSOR "Sensor"
# define D_SSID "SSID"
# define D_START "Start"
# define D_STD_TIME "STD"
# define D_STOP "Stop"
# define D_SUBNET_MASK "Maska podsítě"
# define D_SUBSCRIBE_TO "Přihlaš se do"
# define D_UNSUBSCRIBE_FROM "Unsubscribe from"
# define D_SUCCESSFUL "úspěšné."
# define D_SUNRISE "Svítání"
# define D_SUNSET "Soumrak"
# define D_TEMPERATURE "Teplota"
# define D_TO "do"
# define D_TOGGLE "Přepni"
# define D_TOPIC "Topic"
# define D_TOTAL_USAGE "Total Usage"
# define D_TRANSMIT "Odešli"
# define D_TRUE "Pravda"
# define D_TVOC "TVOC"
# define D_UPGRADE "aktualizace"
# define D_UPLOAD "Nahrání..."
# define D_UPTIME "Uptime"
# define D_USER "Uživatel"
# define D_UTC_TIME "UTC"
# define D_UV_INDEX "UV Index"
# define D_UV_INDEX_1 "Nízký"
# define D_UV_INDEX_2 "Střední"
# define D_UV_INDEX_3 "Vysoký"
# define D_UV_INDEX_4 "Nebezpečný"
# define D_UV_INDEX_5 "Popál1 / 2"
# define D_UV_INDEX_6 "Popál3"
# define D_UV_INDEX_7 "MimoRozsah"
# define D_UV_LEVEL "úroveň UV"
# define D_UV_POWER "UV Power"
# define D_VERSION "Verze"
# define D_VOLTAGE "Napětí"
2020-11-01 09:28:43 +00:00
# define D_VOLUME "Volume"
2019-12-17 02:09:34 +00:00
# define D_WEIGHT "Hmotnost"
# define D_WARMLIGHT "Teplé světlo"
# define D_WEB_SERVER "Web Server"
// tasmota.ino
# define D_WARNING_MINIMAL_VERSION "UPOZORNĚNÍ Tato verze nepodporuje trvalé nastavení"
# define D_LEVEL_10 "úroveň 1-0"
# define D_LEVEL_01 "úroveň 0-1"
# define D_SERIAL_LOGGING_DISABLED "Logování na sériovém portu ukončeno"
# define D_SYSLOG_LOGGING_REENABLED "Obnoven zápis do Syslog"
# define D_SET_BAUDRATE_TO "Nastavení rychlosti přenosu na"
# define D_RECEIVED_TOPIC "Přijatý topic"
# define D_DATA_SIZE "Velikost dat"
# define D_ANALOG_INPUT "Analogový vstup"
// support.ino
# define D_OSWATCH "osWatch"
# define D_BLOCKED_LOOP "Zablokování smyčky"
# define D_WPS_FAILED_WITH_STATUS "Chyba WPSconfig se statusem"
# define D_ACTIVE_FOR_3_MINUTES "aktivní 3 minuty"
# define D_FAILED_TO_START "nepodařilo se spustit"
# define D_PATCH_ISSUE_2186 "Chyba 2186"
# define D_CONNECTING_TO_AP "Připojování k AP"
# define D_IN_MODE "v módu"
# define D_CONNECT_FAILED_NO_IP_ADDRESS "Chyba připojení, nebyla obdržena IP adresa"
# define D_CONNECT_FAILED_AP_NOT_REACHED "Chyba připojení, nedostupný AP"
2020-04-07 15:31:22 +01:00
# define D_CONNECT_FAILED_WRONG_PASSWORD "Chyba připojení"
2019-12-17 02:09:34 +00:00
# define D_CONNECT_FAILED_AP_TIMEOUT "Chyba připojení, uplynul AP timeout"
# define D_ATTEMPTING_CONNECTION "Připojování..."
# define D_CHECKING_CONNECTION "Zkouška spojení..."
# define D_QUERY_DONE "Vyslání dotazu. Nalezena služba MQTT"
# define D_MQTT_SERVICE_FOUND "Služba MQTT byla nalezena"
# define D_FOUND_AT "znalezeno v"
# define D_SYSLOG_HOST_NOT_FOUND "Syslog Host nebyl nalezen"
// settings.ino
# define D_SAVED_TO_FLASH_AT "Uloženo do paměti flash v"
# define D_LOADED_FROM_FLASH_AT "Staženo z paměti flash z"
# define D_USE_DEFAULTS "Použij defaultní hodnoty"
# define D_ERASED_SECTOR "Smazaný sektor"
// xdrv_02_webserver.ino
# define D_NOSCRIPT "Pro používání prostředí Tasmota povolte JavaScript"
# define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Firmware MINIMÁLNÍ<br>prosím zaktualizujte"
# define D_WEBSERVER_ACTIVE_ON "Aktivní Web server"
# define D_WITH_IP_ADDRESS "na IP adrese"
# define D_WEBSERVER_STOPPED "Web server zastaven"
# define D_FILE_NOT_FOUND "Soubor nebyl nalezen"
# define D_REDIRECTED "Přesměrování na vlastní portál"
# define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wi-Fi manager nastaví AP a zachová STA"
# define D_WIFIMANAGER_SET_ACCESSPOINT "Wi-Fi manager nastaví Access Point"
# define D_TRYING_TO_CONNECT "Zkouším připojit zařízení k síti"
# define D_RESTART_IN "Restart"
# define D_SECONDS "sekund"
# define D_DEVICE_WILL_RESTART "Zařízení bude zrestartováno během několika sekund"
# define D_BUTTON_TOGGLE "Přepínač"
# define D_CONFIGURATION "Nastavení"
# define D_INFORMATION "Informace"
# define D_FIRMWARE_UPGRADE "Aktualizace firmware"
# define D_CONSOLE "Konzole"
# define D_CONFIRM_RESTART "Potvrzení restartu"
# define D_CONFIGURE_MODULE "Nastavení modulu"
# define D_CONFIGURE_WIFI "Nastavení WiFi"
# define D_CONFIGURE_MQTT "Nastavení MQTT"
# define D_CONFIGURE_DOMOTICZ "Nastavení Domoticz"
# define D_CONFIGURE_LOGGING "Nastavení logování"
# define D_CONFIGURE_OTHER "Jiná nastavení"
# define D_CONFIRM_RESET_CONFIGURATION "Potvrzení resetu nastavení"
# define D_RESET_CONFIGURATION "Reset nastavení"
# define D_BACKUP_CONFIGURATION "Záloha nastavení"
# define D_RESTORE_CONFIGURATION "Obnovení nastavení"
# define D_MAIN_MENU "Hlavní menu"
# define D_MODULE_PARAMETERS "Nastavení modulu"
# define D_MODULE_TYPE "Typ modulu"
# define D_PULLUP_ENABLE "Tlačítko / Spínač bez pull-up"
# define D_ADC "ADC"
# define D_GPIO "GPIO"
# define D_SERIAL_IN "Serial In"
# define D_SERIAL_OUT "Serial Out"
# define D_WIFI_PARAMETERS "Nastavení WiFi"
# define D_SCAN_FOR_WIFI_NETWORKS "Scan sítí WiFi"
# define D_SCAN_DONE "Scan dokončen"
# define D_NO_NETWORKS_FOUND "Síť nebyla nalezena"
# define D_REFRESH_TO_SCAN_AGAIN "Zopakovat scan"
# define D_DUPLICATE_ACCESSPOINT "Kopie AP"
# define D_SKIPPING_LOW_QUALITY "Přeskočení z důvodu kvality signálu"
# define D_RSSI "RSSI"
# define D_WEP "WEP"
# define D_WPA_PSK "WPA PSK"
# define D_WPA2_PSK "WPA2 PSK"
# define D_AP1_SSID "AP1 SSID"
# define D_AP1_PASSWORD "Heslo AP1"
# define D_AP2_SSID "AP2 SSID"
# define D_AP2_PASSWORD "Heslo AP2"
# define D_MQTT_PARAMETERS "Nastavení MQTT"
# define D_CLIENT "Klient"
# define D_FULL_TOPIC "Celý topic"
# define D_LOGGING_PARAMETERS "Volba logování"
# define D_SERIAL_LOG_LEVEL "Seriová úroveň logu"
# define D_MQTT_LOG_LEVEL "Mqtt log level"
# define D_WEB_LOG_LEVEL "Webová úroveň logu"
# define D_SYS_LOG_LEVEL "Systemová úroveň logu"
# define D_MORE_DEBUG "Více debug informací"
# define D_SYSLOG_HOST "Syslog host"
# define D_SYSLOG_PORT "Syslog port"
# define D_TELEMETRY_PERIOD "Interval telemetrie"
# define D_OTHER_PARAMETERS "Další nastavení"
# define D_TEMPLATE "Šablona"
# define D_ACTIVATE "Aktivovat"
2020-05-17 16:10:17 +01:00
# define D_DEVICE_NAME "Device Name"
2019-12-17 02:09:34 +00:00
# define D_WEB_ADMIN_PASSWORD "Heslo Web administrátora"
# define D_MQTT_ENABLE "MQTT aktivní"
2020-08-12 16:20:37 +01:00
# define D_MQTT_TLS_ENABLE "MQTT TLS"
2019-12-17 02:09:34 +00:00
# define D_FRIENDLY_NAME "Friendly Name"
# define D_BELKIN_WEMO "Belkin WeMo"
# define D_HUE_BRIDGE "Hue Bridge"
# define D_SINGLE_DEVICE "single device"
# define D_MULTI_DEVICE "multi device"
# define D_CONFIGURE_TEMPLATE "Nastavení šablony"
# define D_TEMPLATE_PARAMETERS "Parametry šablony"
# define D_TEMPLATE_NAME "Název"
# define D_BASE_TYPE "Vzor z"
# define D_TEMPLATE_FLAGS "Volby"
# define D_SAVE_CONFIGURATION "Ulož nastavení"
# define D_CONFIGURATION_SAVED "Nastavení uloženo"
# define D_CONFIGURATION_RESET "Nastavení resetováno"
# define D_PROGRAM_VERSION "Verze programu"
# define D_BUILD_DATE_AND_TIME "Datum a čas kompilace"
# define D_CORE_AND_SDK_VERSION "Verze Core / SDK"
# define D_FLASH_WRITE_COUNT "Počet zápisů do paměti"
# define D_MAC_ADDRESS "Adresa MAC"
# define D_MQTT_HOST "Host MQTT"
# define D_MQTT_PORT "Port MQTT"
# define D_MQTT_CLIENT "Klient MQTT"
# define D_MQTT_USER "Uživatel MQTT"
# define D_MQTT_TOPIC "Topic MQTT"
# define D_MQTT_GROUP_TOPIC "Topic skupiny MQTT"
# define D_MQTT_FULL_TOPIC "Celý topic MQTT"
2020-08-12 16:20:37 +01:00
# define D_MQTT_NO_RETAIN "MQTT No Retain"
2019-12-17 02:09:34 +00:00
# define D_MDNS_DISCOVERY "Získávání mDNS"
# define D_MDNS_ADVERTISE "Rozesílání mDNS"
# define D_ESP_CHIP_ID "ID systému ESP"
# define D_FLASH_CHIP_ID "ID systému paměti flash"
# define D_FLASH_CHIP_SIZE "Velikost flash"
# define D_FREE_PROGRAM_SPACE "Volné místo pro program"
# define D_UPGRADE_BY_WEBSERVER "Aktualizace z Web serveru"
# define D_OTA_URL "URL OTA"
# define D_START_UPGRADE "Start aktualizace"
# define D_UPGRADE_BY_FILE_UPLOAD "Aktualizace nahráním souboru"
# define D_UPLOAD_STARTED "Nahrávání zahájeno"
# define D_UPGRADE_STARTED "Zahájení aktualizace"
# define D_UPLOAD_DONE "Nahrávání ukončeno"
2020-09-01 12:05:46 +01:00
# define D_UPLOAD_TRANSFER "Upload transfer"
2020-08-08 12:18:39 +01:00
# define D_TRANSFER_STARTED "Transfer started"
2019-12-17 02:09:34 +00:00
# define D_UPLOAD_ERR_1 "Soubor nebyl vybrán"
# define D_UPLOAD_ERR_2 "Málo místa"
2020-11-19 14:43:47 +00:00
# define D_UPLOAD_ERR_3 "Invalid file signature"
2019-12-17 02:09:34 +00:00
# define D_UPLOAD_ERR_4 "Velikost programu je větší než skutečná velikost paměti flash"
# define D_UPLOAD_ERR_5 "Chyba nahrávání, nesouhlasí porovnávané bity"
# define D_UPLOAD_ERR_6 "Chyba nahrávání. Spuštěn zápis do logu na úrovni 3"
# define D_UPLOAD_ERR_7 "Nahrávání přerušeno"
# define D_UPLOAD_ERR_8 "Špatný soubor"
# define D_UPLOAD_ERR_9 "Soubor je příliš velký"
# define D_UPLOAD_ERR_10 "Chyba inicializace RF chipu"
# define D_UPLOAD_ERR_11 "Chyba smazání RF chipu"
# define D_UPLOAD_ERR_12 "Chyba při zápisu do RF chipu"
# define D_UPLOAD_ERR_13 "Chyba dekódování RF firmwaru"
2019-12-20 14:12:44 +00:00
# define D_UPLOAD_ERR_14 "Not compatible"
2019-12-17 02:09:34 +00:00
# define D_UPLOAD_ERROR_CODE "Chyba nahrávání"
# define D_ENTER_COMMAND "Vlož příkaz"
# define D_ENABLE_WEBLOG_FOR_RESPONSE "Zapni úroveň 2 zápisu Weblog, pokud je očekávána odpověď"
# define D_NEED_USER_AND_PASSWORD "Vyžadován uživatel=<username>&heslo=<password>"
// xdrv_01_mqtt.ino
# define D_FINGERPRINT "Verifikuj otisk TLS..."
# define D_TLS_CONNECT_FAILED_TO "Nepřipojeno TLS do"
# define D_RETRY_IN "Zopakuji za"
# define D_VERIFIED "Ověřeno otisk "
# define D_INSECURE "Nesprávné připojení z důvodu chybného otisku TLS"
# define D_CONNECT_FAILED_TO "Spojení se nepodařilo navázat"
// xplg_wemohue.ino
# define D_MULTICAST_DISABLED "Multicast je vypnutý"
# define D_MULTICAST_REJOINED "Multicast opět připojený"
# define D_MULTICAST_JOIN_FAILED "Multicast neúspěšný"
# define D_FAILED_TO_SEND_RESPONSE "Nepodařilo se odeslat odpověď"
# define D_WEMO "WeMo"
# define D_WEMO_BASIC_EVENT "WeMo základní událost"
# define D_WEMO_EVENT_SERVICE "WeMo servisní událost"
# define D_WEMO_META_SERVICE "WeMo meta událost"
# define D_WEMO_SETUP "WeMo setup"
# define D_RESPONSE_SENT "Odpověď odeslána"
# define D_HUE "Hue"
# define D_HUE_BRIDGE_SETUP "Hue setup"
# define D_HUE_API_NOT_IMPLEMENTED "Hue API není implementováno"
# define D_HUE_API "Hue API"
# define D_HUE_POST_ARGS "Hue POST args"
# define D_3_RESPONSE_PACKETS_SENT "3 pakety odpovědi odeslány"
// xdrv_07_domoticz.ino
# define D_DOMOTICZ_PARAMETERS "Nastavení Domoticz"
# define D_DOMOTICZ_IDX "Idx"
# define D_DOMOTICZ_KEY_IDX "Key idx"
# define D_DOMOTICZ_SWITCH_IDX "Spinac idx"
# define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
# define D_DOMOTICZ_TEMP "Temp"
# define D_DOMOTICZ_TEMP_HUM "Temp,Vlhk"
# define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Vlhk,Tlak"
# define D_DOMOTICZ_POWER_ENERGY "Příkon,Energie"
# define D_DOMOTICZ_ILLUMINANCE "Osvětlení"
# define D_DOMOTICZ_COUNT "Počítadlo / PM1"
# define D_DOMOTICZ_VOLTAGE "Napětí / PM2,5"
# define D_DOMOTICZ_CURRENT "Proud / PM10"
# define D_DOMOTICZ_AIRQUALITY "AirQuality"
# define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter"
# define D_DOMOTICZ_UPDATE_TIMER "Aktualizace stopek"
// xdrv_09_timers.ino
# define D_CONFIGURE_TIMER "Nastavení Časovače"
# define D_TIMER_PARAMETERS "Časovač"
# define D_TIMER_ENABLE "Povol časovače"
# define D_TIMER_ARM "Aktivní"
# define D_TIMER_TIME "Čas"
# define D_TIMER_DAYS "Dny"
# define D_TIMER_REPEAT "Opakovat"
# define D_TIMER_OUTPUT "Výstup"
# define D_TIMER_ACTION "Napájení"
// xdrv_10_knx.ino
# define D_CONFIGURE_KNX "Nastavení KNX"
# define D_KNX_PARAMETERS "KNX parametry"
# define D_KNX_GENERAL_CONFIG "Obecné"
# define D_KNX_PHYSICAL_ADDRESS "Fyzická adresa"
# define D_KNX_PHYSICAL_ADDRESS_NOTE "( Musí být jedinečná v síti KNX )"
# define D_KNX_ENABLE "Povol KNX"
# define D_KNX_GROUP_ADDRESS_TO_WRITE "Data k odeslání na skupinové adresy"
# define D_ADD "Přidej"
# define D_DELETE "Smaž"
# define D_REPLY "Odpověď"
# define D_KNX_GROUP_ADDRESS_TO_READ "Skupinové adresy pro příjem dat z"
# define D_RECEIVED_FROM "Přijato z"
# define D_KNX_COMMAND_WRITE "Zapiš"
# define D_KNX_COMMAND_READ "Čti"
# define D_KNX_COMMAND_OTHER "Jiné"
# define D_SENT_TO "pošli"
# define D_KNX_WARNING "Skupinová adresa ( 0 / 0 / 0 ) je rezervována a nemůže být použita."
# define D_KNX_ENHANCEMENT "Communication Enhancement"
# define D_KNX_TX_SLOT "KNX TX"
# define D_KNX_RX_SLOT "KNX RX"
2020-06-18 19:25:59 +01:00
# define D_KNX_TX_SCENE "KNX SCENE TX"
# define D_KNX_RX_SCENE "KNX SCENE RX"
2019-12-17 02:09:34 +00:00
2020-12-21 08:56:04 +00:00
// xdrv_23_zigbee
# define D_ZIGBEE_PERMITJOIN_ACTIVE "Devices allowed to join"
# define D_ZIGBEE_MAPPING_TITLE "Tasmota Zigbee Mapping"
# define D_ZIGBEE_NOT_STARTED "Zigbee not started"
# define D_ZIGBEE_MAPPING_IN_PROGRESS_SEC "Mapping in progress (%d s. remaining)"
# define D_ZIGBEE_MAPPING_NOT_PRESENT "No mapping"
# define D_ZIGBEE_MAP_REFRESH "Zigbee Map Refresh"
# define D_ZIGBEE_MAP "Zigbee Map"
# define D_ZIGBEE_PERMITJOIN "Zigbee Permit Join"
# define D_ZIGBEE_GENERATE_KEY "generating random Zigbee network key"
# define D_ZIGBEE_UNKNOWN_DEVICE "Unknown device"
# define D_ZIGBEE_UNKNOWN_ATTRIBUTE "Unknown attribute"
# define D_ZIGBEE_INVALID_PARAM "Invalid parameter"
# define D_ZIGBEE_MISSING_PARAM "Missing parameters"
# define D_ZIGBEE_UNKNWON_ATTRIBUTE "Unknown attribute name (ignored): %s"
# define D_ZIGBEE_TOO_MANY_CLUSTERS "No more than one cluster id per command"
# define D_ZIGBEE_WRONG_DELIMITER "Wrong delimiter for payload"
# define D_ZIGBEE_UNRECOGNIZED_COMMAND "Unrecognized zigbee command: %s"
# define D_ZIGBEE_TOO_MANY_COMMANDS "Only 1 command allowed (%d)"
# define D_ZIGBEE_NO_ATTRIBUTE "No attribute in list"
# define D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE "Unsupported attribute type"
# define D_ZIGBEE_JSON_REQUIRED "Config requires JSON objects"
# define D_ZIGBEE_RESET_1_OR_2 "1 or 2 to reset"
# define D_ZIGBEE_EEPROM_FOUND_AT_ADDRESS "ZBBridge EEPROM found at address"
# define D_ZIGBEE_RANDOMIZING_ZBCONFIG "Randomizing Zigbee parameters, please check with 'ZbConfig'"
2019-12-17 02:09:34 +00:00
// xdrv_03_energy.ino
# define D_ENERGY_TODAY "Spotřeba Dnes"
# define D_ENERGY_YESTERDAY "Spotřeba Včera"
# define D_ENERGY_TOTAL "Celková spotřeba"
// xdrv_27_shutter.ino
# define D_OPEN "Open"
# define D_CLOSE "Close"
# define D_DOMOTICZ_SHUTTER "Shutter"
// xdrv_28_pcf8574.ino
# define D_CONFIGURE_PCF8574 "Configure PCF8574"
# define D_PCF8574_PARAMETERS "PCF8574 parameters"
# define D_INVERT_PORTS "Invert Ports"
# define D_DEVICE "Device"
# define D_DEVICE_INPUT "Input"
# define D_DEVICE_OUTPUT "Output"
// xsns_05_ds18b20.ino
# define D_SENSOR_BUSY "Sensor DS18x20 obsazen"
# define D_SENSOR_CRC_ERROR "Sensor DS18x20 chyba CRC"
# define D_SENSORS_FOUND "Nalezen sensor DS18x20"
// xsns_06_dht.ino
# define D_TIMEOUT_WAITING_FOR "Čekání na"
# define D_START_SIGNAL_LOW "nízký startovní signál"
# define D_START_SIGNAL_HIGH "vysoký startovní signál"
# define D_PULSE "impuls"
# define D_CHECKSUM_FAILURE "Chybný kontrolní součet"
// xsns_07_sht1x.ino
# define D_SENSOR_DID_NOT_ACK_COMMAND "Sensor neobdržel příkaz ACK"
# define D_SHT1X_FOUND "SHT1X nalezen"
// xsns_18_pms5003.ino
# define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter
# define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter
# define D_PARTICALS_BEYOND "částic"
2020-05-06 20:30:36 +01:00
// xsns_27_apds9960.ino
# define D_GESTURE "Gesto"
# define D_COLOR_RED "Červená"
# define D_COLOR_GREEN "Zelená"
# define D_COLOR_BLUE "Modrá"
# define D_CCT "CCT"
# define D_PROXIMITY "Blízkost"
2019-12-17 02:09:34 +00:00
// xsns_32_mpu6050.ino
# define D_AX_AXIS "Accel. osa-X"
# define D_AY_AXIS "Accel. osa-Y"
# define D_AZ_AXIS "Accel. osa-Z"
# define D_GX_AXIS "Gyro osa-X"
# define D_GY_AXIS "Gyro osa-Y"
# define D_GZ_AXIS "Gyro osa-Z"
// xsns_34_hx711.ino
# define D_HX_CAL_REMOVE "Odstraňte zátěž"
# define D_HX_CAL_REFERENCE "Vložte referenční zátěž"
# define D_HX_CAL_DONE "Zkalibrováno"
# define D_HX_CAL_FAIL "Chyba kalibrace"
# define D_RESET_HX711 "Reset váhy"
# define D_CONFIGURE_HX711 "Konfigurace váhy"
# define D_HX711_PARAMETERS "Parametry váhy"
# define D_ITEM_WEIGHT "Vlastní hmotnost"
# define D_REFERENCE_WEIGHT "Referenční hmotnost"
# define D_CALIBRATE "Kalibruj"
# define D_CALIBRATION "Kalibrace"
//xsns_35_tx20.ino
# define D_TX20_WIND_DIRECTION "Směr větru"
# define D_TX20_WIND_SPEED "Rychlost větru"
2020-02-24 16:25:03 +00:00
# define D_TX20_WIND_SPEED_MIN "Minimální rychlost větru"
2019-12-17 02:09:34 +00:00
# define D_TX20_WIND_SPEED_MAX "Maximální rychlost větru"
# define D_TX20_NORTH "S"
# define D_TX20_EAST "V"
# define D_TX20_SOUTH "J"
# define D_TX20_WEST "Z"
2020-03-16 15:52:22 +00:00
// xsns_53_sml.ino
2020-03-15 11:57:24 +00:00
# define D_TPWRIN "Energy Total-In"
# define D_TPWROUT "Energy Total-Out"
# define D_TPWRCURR "Active Power-In / Out"
# define D_TPWRCURR1 "Active Power-In p1"
# define D_TPWRCURR2 "Active Power-In p2"
# define D_TPWRCURR3 "Active Power-In p3"
2020-03-14 18:29:28 +00:00
# define D_Strom_L1 "Current L1"
# define D_Strom_L2 "Current L2"
# define D_Strom_L3 "Current L3"
# define D_Spannung_L1 "Voltage L1"
# define D_Spannung_L2 "Voltage L2"
# define D_Spannung_L3 "Voltage L3"
# define D_METERNR "Meter_number"
# define D_METERSID "Service ID"
# define D_GasIN "Counter"
# define D_H2oIN "Counter"
# define D_StL1L2L3 "Current L1+L2+L3"
# define D_SpL1L2L3 "Voltage L1+L2+L3 / 3"
2019-12-17 02:09:34 +00:00
// tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
# define D_SENSOR_NONE "Není"
# define D_SENSOR_USER "User"
2020-12-20 12:22:01 +00:00
# define D_SENSOR_OPTION "Option"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_DHT11 "DHT11"
# define D_SENSOR_AM2301 "AM2301"
# define D_SENSOR_SI7021 "SI7021"
# define D_SENSOR_DS18X20 "DS18x20"
# define D_SENSOR_I2C_SCL "I2C SCL"
# define D_SENSOR_I2C_SDA "I2C SDA"
# define D_SENSOR_WS2812 "WS2812"
# define D_SENSOR_DFR562 "MP3 Player"
# define D_SENSOR_IRSEND "IRsend"
# define D_SENSOR_SWITCH "Spínač" // Suffix "1"
# define D_SENSOR_BUTTON "Tlačítko" // Suffix "1"
# define D_SENSOR_RELAY "Relé" // Suffix "1i"
# define D_SENSOR_LED "Led" // Suffix "1i"
# define D_SENSOR_LED_LINK "LedLink" // Suffix "i"
# define D_SENSOR_PWM "PWM" // Suffix "1",
# define D_SENSOR_COUNTER "Počítadlo" // Suffix "1"
# define D_SENSOR_IRRECV "IRrecv"
# define D_SENSOR_MHZ_RX "MHZ Rx"
# define D_SENSOR_MHZ_TX "MHZ Tx"
# define D_SENSOR_PZEM004_RX "PZEM004 Rx"
# define D_SENSOR_PZEM016_RX "PZEM016 Rx"
# define D_SENSOR_PZEM017_RX "PZEM017 Rx"
# define D_SENSOR_PZEM0XX_TX "PZEM0XX Tx"
# define D_SENSOR_SAIR_RX "SAir Rx"
# define D_SENSOR_SAIR_TX "SAir Tx"
# define D_SENSOR_SPI_CS "SPI CS"
# define D_SENSOR_SPI_DC "SPI DC"
# define D_SENSOR_SPI_MISO "SPI MISO"
# define D_SENSOR_SPI_MOSI "SPI MOSI"
# define D_SENSOR_SPI_CLK "SPI CLK"
# define D_SENSOR_BACKLIGHT "Backlight"
2020-04-08 18:47:45 +01:00
# define D_SENSOR_PMS5003_TX "PMS5003 Tx"
# define D_SENSOR_PMS5003_RX "PMS5003 Rx"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_SDS0X1_RX "SDS0X1 Rx"
# define D_SENSOR_SDS0X1_TX "SDS0X1 Tx"
# define D_SENSOR_HPMA_RX "HPMA Rx"
# define D_SENSOR_HPMA_TX "HPMA Tx"
# define D_SENSOR_SBR_RX "SerBr Rx"
# define D_SENSOR_SBR_TX "SerBr Tx"
# define D_SENSOR_SR04_TRIG "SR04 Tri / TX"
# define D_SENSOR_SR04_ECHO "SR04 Ech / RX"
# define D_SENSOR_SDM120_TX "SDMx20 Tx"
# define D_SENSOR_SDM120_RX "SDMx20 Rx"
# define D_SENSOR_SDM630_TX "SDM630 Tx"
# define D_SENSOR_SDM630_RX "SDM630 Rx"
2020-10-02 15:37:43 +01:00
# define D_SENSOR_WE517_TX "WE517 Tx"
# define D_SENSOR_WE517_RX "WE517 Rx"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_TM1638_CLK "TM16 CLK"
# define D_SENSOR_TM1638_DIO "TM16 DIO"
# define D_SENSOR_TM1638_STB "TM16 STB"
# define D_SENSOR_HX711_SCK "HX711 SCK"
# define D_SENSOR_HX711_DAT "HX711 DAT"
2020-12-22 19:51:03 +00:00
# define D_SENSOR_FTC532 "FTC532"
2021-01-07 15:39:41 +00:00
# define D_SENSOR_BS814_CLK "BS814 CLK"
# define D_SENSOR_BS814_DAT "BS814 DAT"
2020-02-20 17:50:43 +00:00
# define D_SENSOR_TX2X_TX "TX2x"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_RFSEND "RFSend"
# define D_SENSOR_RFRECV "RFrecv"
# define D_SENSOR_TUYA_TX "Tuya Tx"
# define D_SENSOR_TUYA_RX "Tuya Rx"
# define D_SENSOR_MGC3130_XFER "MGC3130 Xfr"
# define D_SENSOR_MGC3130_RESET "MGC3130 Rst"
# define D_SENSOR_SSPI_MISO "SSPI MISO"
# define D_SENSOR_SSPI_MOSI "SSPI MOSI"
# define D_SENSOR_SSPI_SCLK "SSPI SCLK"
# define D_SENSOR_SSPI_CS "SSPI CS"
# define D_SENSOR_SSPI_DC "SSPI DC"
# define D_SENSOR_RF_SENSOR "RF Sensor"
# define D_SENSOR_AZ_RX "AZ Rx"
# define D_SENSOR_AZ_TX "AZ Tx"
# define D_SENSOR_MAX31855_CS "MX31855 CS"
# define D_SENSOR_MAX31855_CLK "MX31855 CLK"
# define D_SENSOR_MAX31855_DO "MX31855 DO"
2020-08-23 11:24:35 +01:00
# define D_SENSOR_MAX31865_CS "MX31865 CS"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_NRG_SEL "HLWBL SEL" // Suffix "i"
# define D_SENSOR_NRG_CF1 "HLWBL CF1"
# define D_SENSOR_HLW_CF "HLW8012 CF"
# define D_SENSOR_HJL_CF "BL0937 CF"
# define D_SENSOR_MCP39F5_TX "MCP39F5 Tx"
# define D_SENSOR_MCP39F5_RX "MCP39F5 Rx"
# define D_SENSOR_MCP39F5_RST "MCP39F5 Rst"
# define D_SENSOR_CSE7766_TX "CSE7766 Tx"
# define D_SENSOR_CSE7766_RX "CSE7766 Rx"
# define D_SENSOR_PN532_TX "PN532 Tx"
# define D_SENSOR_PN532_RX "PN532 Rx"
# define D_SENSOR_SM16716_CLK "SM16716 CLK"
# define D_SENSOR_SM16716_DAT "SM16716 DAT"
# define D_SENSOR_SM16716_POWER "SM16716 PWR"
2020-12-17 15:33:26 +00:00
# define D_SENSOR_P9813_CLK "P9813 Clk"
# define D_SENSOR_P9813_DAT "P9813 Dat"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_MY92X1_DI "MY92x1 DI"
# define D_SENSOR_MY92X1_DCKI "MY92x1 DCKI"
# define D_SENSOR_ARIRFRCV "ALux IrRcv"
# define D_SENSOR_ARIRFSEL "ALux IrSel"
# define D_SENSOR_TXD "Serial Tx"
# define D_SENSOR_RXD "Serial Rx"
# define D_SENSOR_ROTARY "Rotary" // Suffix "1A"
# define D_SENSOR_HRE_CLOCK "HRE Clock"
# define D_SENSOR_HRE_DATA "HRE Data"
# define D_SENSOR_ADE7953_IRQ "ADE7953 IRQ"
# define D_SENSOR_BUZZER "Buzzer"
# define D_SENSOR_OLED_RESET "OLED Reset"
# define D_SENSOR_ZIGBEE_TXD "Zigbee Tx"
# define D_SENSOR_ZIGBEE_RXD "Zigbee Rx"
2020-07-22 09:07:07 +01:00
# define D_SENSOR_ZIGBEE_RST "Zigbee Rst"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_SOLAXX1_TX "SolaxX1 Tx"
# define D_SENSOR_SOLAXX1_RX "SolaxX1 Rx"
# define D_SENSOR_IBEACON_TX "iBeacon TX"
# define D_SENSOR_IBEACON_RX "iBeacon RX"
# define D_SENSOR_RDM6300_RX "RDM6300 RX"
# define D_SENSOR_CC1101_CS "CC1101 CS"
# define D_SENSOR_A4988_DIR "A4988 DIR"
# define D_SENSOR_A4988_STP "A4988 STP"
# define D_SENSOR_A4988_ENA "A4988 ENA"
# define D_SENSOR_A4988_MS1 "A4988 MS1"
2020-10-23 14:18:58 +01:00
# define D_SENSOR_OUTPUT_HI "Output Hi"
# define D_SENSOR_OUTPUT_LO "Output Lo"
2020-11-10 14:21:55 +00:00
# define D_SENSOR_AS608_TX "AS608 Tx"
# define D_SENSOR_AS608_RX "AS608 Rx"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_DDS2382_TX "DDS238-2 Tx"
# define D_SENSOR_DDS2382_RX "DDS238-2 Rx"
# define D_SENSOR_DDSU666_TX "DDSU666 Tx"
# define D_SENSOR_DDSU666_RX "DDSU666 Rx"
# define D_SENSOR_SM2135_CLK "SM2135 Clk"
# define D_SENSOR_SM2135_DAT "SM2135 Dat"
# define D_SENSOR_DEEPSLEEP "DeepSleep"
# define D_SENSOR_EXS_ENABLE "EXS Enable"
2020-06-18 15:05:55 +01:00
# define D_SENSOR_CLIENT_TX "Client TX"
# define D_SENSOR_CLIENT_RX "Client RX"
# define D_SENSOR_CLIENT_RESET "Client RST"
2019-12-17 02:16:25 +00:00
# define D_SENSOR_GPS_RX "GPS RX"
# define D_SENSOR_GPS_TX "GPS TX"
2020-02-06 16:05:37 +00:00
# define D_SENSOR_HM10_RX "HM10 RX"
# define D_SENSOR_HM10_TX "HM10 TX"
2020-01-23 16:18:44 +00:00
# define D_SENSOR_LE01MR_RX "LE-01MR Rx"
# define D_SENSOR_LE01MR_TX "LE-01MR Tx"
2020-06-07 16:21:29 +01:00
# define D_SENSOR_BL0940_RX "BL0940 Rx"
2020-02-27 20:31:19 +00:00
# define D_SENSOR_CC1101_GDO0 "CC1101 GDO0"
# define D_SENSOR_CC1101_GDO2 "CC1101 GDO2"
2020-02-28 00:28:06 +00:00
# define D_SENSOR_HRXL_RX "HRXL Rx"
2020-08-16 21:49:16 +01:00
# define D_SENSOR_DYP_RX "DYP Rx"
2020-03-18 10:24:56 +00:00
# define D_SENSOR_ELECTRIQ_MOODL "MOODL Tx"
2020-05-05 17:36:12 +01:00
# define D_SENSOR_AS3935 "AS3935"
2020-05-06 20:33:07 +01:00
# define D_SENSOR_WINDMETER_SPEED "WindMeter Spd"
2020-06-12 15:28:57 +01:00
# define D_SENSOR_TELEINFO_RX "TInfo Rx"
# define D_SENSOR_TELEINFO_ENABLE "TInfo EN"
2020-06-17 15:17:28 +01:00
# define D_SENSOR_LMT01_PULSE "LMT01 Pulse"
2020-08-04 15:33:05 +01:00
# define D_SENSOR_ADC_INPUT "ADC Input"
# define D_SENSOR_ADC_TEMP "ADC Temp"
# define D_SENSOR_ADC_LIGHT "ADC Light"
# define D_SENSOR_ADC_BUTTON "ADC Button"
# define D_SENSOR_ADC_RANGE "ADC Range"
# define D_SENSOR_ADC_CT_POWER "ADC CT Power"
# define D_SENSOR_ADC_JOYSTICK "ADC Joystick"
2021-01-05 16:25:08 +00:00
# define D_SENSOR_ADC_PH "ADC pH"
2020-05-05 17:36:12 +01:00
# define D_GPIO_WEBCAM_PWDN "CAM_PWDN"
# define D_GPIO_WEBCAM_RESET "CAM_RESET"
# define D_GPIO_WEBCAM_XCLK "CAM_XCLK"
# define D_GPIO_WEBCAM_SIOD "CAM_SIOD"
# define D_GPIO_WEBCAM_SIOC "CAM_SIOC"
# define D_GPIO_WEBCAM_DATA "CAM_DATA"
# define D_GPIO_WEBCAM_VSYNC "CAM_VSYNC"
# define D_GPIO_WEBCAM_HREF "CAM_HREF"
# define D_GPIO_WEBCAM_PCLK "CAM_PCLK"
# define D_GPIO_WEBCAM_PSCLK "CAM_PSCLK"
# define D_GPIO_WEBCAM_HSD "CAM_HSD"
# define D_GPIO_WEBCAM_PSRCS "CAM_PSRCS"
2020-06-16 17:36:49 +01:00
# define D_SENSOR_ETH_PHY_POWER "ETH POWER"
# define D_SENSOR_ETH_PHY_MDC "ETH MDC"
# define D_SENSOR_ETH_PHY_MDIO "ETH MDIO"
2020-06-15 18:22:56 +01:00
# define D_SENSOR_TCP_TXD "TCP Tx"
# define D_SENSOR_TCP_RXD "TCP Rx"
2020-07-12 16:52:24 +01:00
# define D_SENSOR_IEM3000_TX "iEM3000 TX"
# define D_SENSOR_IEM3000_RX "iEM3000 RX"
2020-10-02 14:10:21 +01:00
# define D_SENSOR_MIEL_HVAC_TX "MiEl HVAC Tx"
# define D_SENSOR_MIEL_HVAC_RX "MiEl HVAC Rx"
2020-11-14 15:43:32 +00:00
# define D_SENSOR_SHELLY_DIMMER_BOOT0 "SHD Boot 0"
# define D_SENSOR_SHELLY_DIMMER_RST_INV "SHD Reset"
2020-11-30 11:52:59 +00:00
# define D_SENSOR_RC522_RST "RC522 Rst"
2020-12-29 11:06:47 +00:00
# define D_SENSOR_RC522_CS "RC522 CS"
# define D_SENSOR_NRF24_CS "NRF24 CS"
# define D_SENSOR_NRF24_DC "NRF24 DC"
# define D_SENSOR_ILI9341_CS "ILI9341 CS"
# define D_SENSOR_ILI9341_DC "ILI9341 DC"
# define D_SENSOR_ILI9488_CS "ILI9488 CS"
# define D_SENSOR_EPAPER29_CS "EPaper29 CS"
# define D_SENSOR_EPAPER42_CS "EPaper42 CS"
# define D_SENSOR_SSD1351_CS "SSD1351 CS"
# define D_SENSOR_RA8876_CS "RA8876 CS"
# define D_SENSOR_ST7789_CS "ST7789 CS"
# define D_SENSOR_ST7789_DC "ST7789 DC"
2021-01-01 15:05:06 +00:00
# define D_SENSOR_SSD1331_CS "SSD1331 CS"
# define D_SENSOR_SSD1331_DC "SSD1331 DC"
2021-01-04 14:03:56 +00:00
# define D_SENSOR_SDCARD_CS "SDCard CS"
2019-12-17 02:09:34 +00:00
// Units
# define D_UNIT_AMPERE "A"
2020-05-07 23:34:25 +01:00
# define D_UNIT_CELSIUS "C"
2019-12-17 02:09:34 +00:00
# define D_UNIT_CENTIMETER "cm"
2020-05-07 23:34:25 +01:00
# define D_UNIT_DEGREE "°"
2020-05-07 23:53:13 +01:00
# define D_UNIT_FAHRENHEIT "F"
2019-12-17 02:09:34 +00:00
# define D_UNIT_HERTZ "Hz"
# define D_UNIT_HOUR "hod"
# define D_UNIT_GALLONS "gal"
# define D_UNIT_GALLONS_PER_MIN "g / m"
# define D_UNIT_KILOGRAM "kg"
# define D_UNIT_INCREMENTS "inc"
2020-05-07 23:34:25 +01:00
# define D_UNIT_KELVIN "K"
2020-04-11 00:48:37 +01:00
# define D_UNIT_KILOMETER "km"
2019-12-17 02:09:34 +00:00
# define D_UNIT_KILOMETER_PER_HOUR "km / h" // or "km/h"
2019-12-30 17:44:08 +00:00
# define D_UNIT_KILOOHM "kΩ"
2019-12-17 02:09:34 +00:00
# define D_UNIT_KILOWATTHOUR "kWh"
2020-11-01 09:28:43 +00:00
# define D_UNIT_LITERS "L"
# define D_UNIT_LITERS_PER_MIN "L / m"
2019-12-17 02:09:34 +00:00
# define D_UNIT_LUX "lx"
# define D_UNIT_MICROGRAM_PER_CUBIC_METER "µg / m³"
# define D_UNIT_MICROMETER "µm"
# define D_UNIT_MICROSECOND "µs"
2020-10-24 08:54:25 +01:00
# define D_UNIT_MICROSIEMENS_PER_CM "µS / cm"
2019-12-17 02:09:34 +00:00
# define D_UNIT_MILLIAMPERE "mA"
2020-11-07 09:41:22 +00:00
# define D_UNIT_MILLILITERS "ml"
2019-12-17 02:09:34 +00:00
# define D_UNIT_MILLIMETER "mm"
# define D_UNIT_MILLIMETER_MERCURY "mmHg"
# define D_UNIT_MILLISECOND "ms"
2020-10-18 13:51:21 +01:00
# define D_UNIT_MILLIVOLT "mV"
2019-12-17 02:09:34 +00:00
# define D_UNIT_MINUTE "min"
# define D_UNIT_PARTS_PER_BILLION "ppb"
# define D_UNIT_PARTS_PER_DECILITER "ppd"
# define D_UNIT_PARTS_PER_MILLION "ppm"
2020-05-07 23:34:25 +01:00
# define D_UNIT_PERCENT "%%"
2019-12-17 02:09:34 +00:00
# define D_UNIT_PRESSURE "hPa"
# define D_UNIT_SECOND "sec"
# define D_UNIT_SECTORS "sektory"
# define D_UNIT_VA "VA"
# define D_UNIT_VAR "VAr"
# define D_UNIT_VOLT "V"
# define D_UNIT_WATT "W"
# define D_UNIT_WATTHOUR "Wh"
# define D_UNIT_WATT_METER_QUADRAT "W / m²"
2020-01-23 16:18:44 +00:00
//SDM220, SDM120, LE01MR
2019-12-17 02:09:34 +00:00
# define D_PHASE_ANGLE "Phase Angle"
# define D_IMPORT_ACTIVE "Import Active"
# define D_EXPORT_ACTIVE "Export Active"
# define D_IMPORT_REACTIVE "Import Reactive"
# define D_EXPORT_REACTIVE "Export Reactive"
# define D_TOTAL_REACTIVE "Total Reactive"
# define D_UNIT_KWARH "kVArh"
# define D_UNIT_ANGLE "Deg"
2020-01-23 16:18:44 +00:00
# define D_TOTAL_ACTIVE "Total Active"
2019-12-17 02:09:34 +00:00
//SOLAXX1
# define D_PV1_VOLTAGE "PV1 Voltage"
# define D_PV1_CURRENT "PV1 Current"
# define D_PV1_POWER "PV1 Power"
# define D_PV2_VOLTAGE "PV2 Voltage"
# define D_PV2_CURRENT "PV2 Current"
# define D_PV2_POWER "PV2 Power"
# define D_SOLAR_POWER "Solar Power"
# define D_INVERTER_POWER "Inverter Power"
# define D_STATUS "Status"
# define D_WAITING "Waiting"
# define D_CHECKING "Checking"
# define D_WORKING "Working"
# define D_FAILURE "Failure"
# define D_SOLAX_ERROR_0 "No Error Code"
# define D_SOLAX_ERROR_1 "Grid Lost Fault"
# define D_SOLAX_ERROR_2 "Grid Voltage Fault"
# define D_SOLAX_ERROR_3 "Grid Frequency Fault"
# define D_SOLAX_ERROR_4 "Pv Voltage Fault"
# define D_SOLAX_ERROR_5 "Isolation Fault"
# define D_SOLAX_ERROR_6 "Over Temperature Fault"
# define D_SOLAX_ERROR_7 "Fan Fault"
# define D_SOLAX_ERROR_8 "Other Device Fault"
2019-12-28 17:25:43 +00:00
//xdrv_10_scripter.ino
# define D_CONFIGURE_SCRIPT "Edit script"
# define D_SCRIPT "edit script"
# define D_SDCARD_UPLOAD "file upload"
2021-01-06 08:53:59 +00:00
# define D_UFSDIR "ufs card directory"
2019-12-28 17:25:43 +00:00
# define D_UPL_DONE "Done"
# define D_SCRIPT_CHARS_LEFT "chars left"
# define D_SCRIPT_CHARS_NO_MORE "no more chars"
# define D_SCRIPT_DOWNLOAD "Download"
# define D_SCRIPT_ENABLE "script enable"
# define D_SCRIPT_UPLOAD "Upload"
# define D_SCRIPT_UPLOAD_FILES "Upload files"
2021-01-06 16:54:03 +00:00
//xdrv_50_filesystem.ino
# define D_MANAGE_FILE_SYSTEM "Manage File system"
# define D_FS_SIZE "Size"
# define D_FS_FREE "Free"
2020-04-25 23:43:50 +01:00
//xsns_67_as3935.ino
# define D_AS3935_GAIN "gain:"
# define D_AS3935_ENERGY "energy:"
# define D_AS3935_DISTANCE "distance:"
# define D_AS3935_DISTURBER "disturber:"
# define D_AS3935_VRMS "µVrms:"
# define D_AS3935_APRX "aprx.:"
# define D_AS3935_AWAY "away"
# define D_AS3935_LIGHT "lightning"
# define D_AS3935_OUT "lightning out of range"
# define D_AS3935_NOT "distance not determined"
# define D_AS3935_ABOVE "lightning overhead"
# define D_AS3935_NOISE "noise detected"
# define D_AS3935_DISTDET "disturber detected"
# define D_AS3935_INTNOEV "Interrupt with no Event!"
2020-09-03 08:37:10 +01:00
# define D_AS3935_FLICKER "IRQ flicker!"
# define D_AS3935_POWEROFF "Power Off"
2020-04-25 23:43:50 +01:00
# define D_AS3935_NOMESS "listening..."
# define D_AS3935_ON "On"
# define D_AS3935_OFF "Off"
# define D_AS3935_INDOORS "Indoors"
# define D_AS3935_OUTDOORS "Outdoors"
# define D_AS3935_CAL_FAIL "calibration failed"
# define D_AS3935_CAL_OK "calibration set to:"
2020-05-07 09:54:29 +01:00
//xsns_68_opentherm.ino
# define D_SENSOR_BOILER_OT_RX "OpenTherm RX"
# define D_SENSOR_BOILER_OT_TX "OpenTherm TX"
2020-08-10 16:42:31 +01:00
// xnrg_15_teleinfo Denky (Teleinfo)
# define D_CONTRACT "Contract"
# define D_POWER_LOAD "Power load"
# define D_CURRENT_TARIFF "Current Tariff"
# define D_TARIFF "Tariff"
# define D_OVERLOAD "ADPS"
# define D_MAX_POWER "Max Power"
# define D_MAX_CURRENT "Max Current"
2020-11-11 16:31:48 +00:00
// xsns_79_as608.ino
# define D_FP_ENROLL_PLACEFINGER "Place finger"
# define D_FP_ENROLL_REMOVEFINGER "Remove finger"
# define D_FP_ENROLL_PLACESAMEFINGER "Place same finger again"
# define D_FP_ENROLL_RETRY "Error so retry"
# define D_FP_ENROLL_RESTART "Restart"
# define D_FP_ENROLL_ERROR "Error"
# define D_FP_ENROLL_RESET "Reset"
# define D_FP_ENROLL_ACTIVE "Active"
# define D_FP_ENROLL_INACTIVE "Inactive"
// Indexed by Adafruit_Fingerprint.h defines
# define D_FP_PACKETRECIEVEERR "Comms error" // 0x01 Error when receiving data package
# define D_FP_NOFINGER "" // 0x02 No finger on the sensor
# define D_FP_IMAGEFAIL "Imaging error" // 0x03 Failed to enroll the finger
# define D_FP_IMAGEMESS "Image too messy" // 0x06 Failed to generate character file due to overly disorderly fingerprint image
# define D_FP_FEATUREFAIL "Fingerprint too small" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image
# define D_FP_NOMATCH "No match" // 0x08 Finger doesn't match
# define D_FP_NOTFOUND "Did not find a match" // 0x09 Failed to find matching finger
# define D_FP_ENROLLMISMATCH "Fingerprint did not match" // 0x0A Failed to combine the character files
# define D_FP_BADLOCATION "Bad location" // 0x0B Addressed PageID is beyond the finger library
# define D_FP_DBRANGEFAIL "DB range error" // 0x0C Error when reading template from library or invalid template
# define D_FP_UPLOADFEATUREFAIL "Upload feature error" // 0x0D Error when uploading template
# define D_FP_PACKETRESPONSEFAIL "Packet response error" // 0x0E Module failed to receive the following data packages
# define D_FP_UPLOADFAIL "Upload error" // 0x0F Error when uploading image
# define D_FP_DELETEFAIL "Delete error" // 0x10 Failed to delete the template
# define D_FP_DBCLEARFAIL "DB Clear error" // 0x11 Failed to clear finger library
# define D_FP_PASSFAIL "Password error" // 0x13 Find whether the fingerprint passed or failed
# define D_FP_INVALIDIMAGE "Image invalid" // 0x15 Failed to generate image because of lac of valid primary image
# define D_FP_FLASHERR "Flash write error" // 0x18 Error when writing flash
# define D_FP_INVALIDREG "Invalid number" // 0x1A Invalid register number
# define D_FP_ADDRCODE "Address code" // 0x20 Address code
# define D_FP_PASSVERIFY "Password verified" // 0x21 Verify the fingerprint passed
# define D_FP_UNKNOWNERROR "Error" // Any other error
2019-12-17 02:09:34 +00:00
# endif // _LANGUAGE_CS_CZ_H_
