Tasmota/tasmota/language/hu_HU.h

1254 lines
52 KiB
C
Raw Normal View History

/*
hu-HU.h - localization for Hungarian in Hungary for Tasmota
2021-01-01 12:44:04 +00:00
Copyright (C) 2021 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifndef _LANGUAGE_HU_HU_H_
#define _LANGUAGE_HU_HU_H_
/*************************** ATTENTION *******************************\
*
* Due to memory constraints only UTF-8 is supported.
* To save code space keep text as short as possible.
* Time and Date provided by SDK can not be localized (yet).
* Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
* Use online command Prefix to translate cmnd, stat and tele.
*
2021-03-16 16:49:13 +00:00
* Updated until v9.3.1.1
\*********************************************************************/
//#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
#define LANGUAGE_LCID 1038
// HTML (ISO 639-1) Language Code
#define D_HTML_LANGUAGE "hu"
// "2017-03-07T11:08:02" - ISO8601:2004
#define D_YEAR_MONTH_SEPARATOR "."
#define D_MONTH_DAY_SEPARATOR "."
#define D_DATE_TIME_SEPARATOR " "
#define D_HOUR_MINUTE_SEPARATOR ":"
#define D_MINUTE_SECOND_SEPARATOR ":"
#define D_DAY3LIST "VasHétKedSzeCsüPénSzo"
#define D_MONTH3LIST "JanFebMárÁprMájJúnJúlAugSzeOktNovDec"
// Non JSON decimal separator
#define D_DECIMAL_SEPARATOR "."
// Common
#define D_ABSOLUTE_HUMIDITY "Abs Humidity"
#define D_ADMIN "Admin"
#define D_AIR_QUALITY "Levegőminőség"
#define D_AP "AP" // Access Point
#define D_AS "mint"
#define D_AUTO "AUTO"
#define D_BATTERY "Battery"
#define D_BATT "Batt" // Short for Battery
#define D_BATTERY_CHARGE "Charge" // Battery charge in %
#define D_BLINK "Villogás"
#define D_BLINKOFF "Villogás ki"
#define D_BOOT_COUNT "Újraindulások száma"
#define D_BRIGHTLIGHT "Max. fényerő"
#define D_BSSID "BSSID"
#define D_BUTTON "Gomb"
#define D_BY "by" // Written by me
#define D_BYTES "Byte-ok"
#define D_CELSIUS "Celsius"
#define D_CHANNEL "Csatorna"
#define D_CO2 "Szén-dioxid"
#define D_CODE "kód" // Button code
#define D_COLDLIGHT "Hideg fény"
#define D_COMMAND "Parancs"
#define D_CONNECTED "Csatlakoztatva"
#define D_CORS_DOMAIN "CORS Domain"
#define D_COUNT "Szám"
#define D_COUNTER "Számláló"
2021-02-25 14:29:27 +00:00
#define D_CT_POWER "CT erősség"
#define D_CURRENT "Áramerősség" // As in Voltage and Current
#define D_CURRENT_NEUTRAL "Current Neutral"
#define D_DATA "Adat"
#define D_DARKLIGHT "Min. fényerő"
#define D_DEBUG "Debug"
2021-02-25 14:29:27 +00:00
#define D_DEWPOINT "Harmatpont"
#define D_DISABLED "Letiltva"
2022-11-26 09:52:42 +00:00
#define D_MOVING_DISTANCE "Moving Distance"
#define D_STATIC_DISTANCE "Static Distance"
#define D_DETECT_DISTANCE "Detect Distance"
#define D_DISTANCE "Távolság"
#define D_DNS_SERVER "DNS szerver"
2021-02-25 14:29:27 +00:00
#define D_DO "Oldott oxygén"
#define D_DONE "Kész"
#define D_DST_TIME "nyári idő"
#define D_EC "EC"
#define D_ECO2 "eCO₂"
#define D_EMULATION "Emuláció"
#define D_ENABLED "Engedélyezve"
#define D_ERASE "Törlés"
#define D_ERROR "Hiba"
#define D_FAHRENHEIT "Fahrenheit"
#define D_FAILED "Sikertelen"
#define D_FALLBACK "Fallback"
#define D_FALLBACK_TOPIC "fallback topik"
#define D_FALSE "Hamis"
#define D_FILE "Fájl"
2023-05-07 16:25:18 +01:00
#define D_FILE_SYSTEM_SIZE "File System Size"
2021-02-25 14:29:27 +00:00
#define D_FLOW_RATE "Átfolyás ráta"
2021-02-04 14:19:59 +00:00
#define D_FRAGMENTATION "frag." // Lower case abbreviated version of fragmentation used in "memory fragmentation"
2022-05-05 15:26:29 +01:00
#define D_FRAME_RATE "Frame rate"
#define D_FREE_MEMORY "Szabad memória"
2021-02-25 14:29:27 +00:00
#define D_PSR_MAX_MEMORY "PS-RAM memória"
#define D_PSR_FREE_MEMORY "PS-RAM szabad memória"
#define D_FREQUENCY "Frekvencia"
#define D_GAS "Gáz"
#define D_GATEWAY "Átjáró"
#define D_GROUP "Csoport"
#define D_HOST "Hoszt"
#define D_HALL_EFFECT "Hall Effect"
#define D_HEATINDEX "Heat index"
#define D_HOSTNAME "Hosztnév"
#define D_HUMIDITY "Páratartalom"
#define D_ILLUMINANCE "Megvilágítás"
#define D_IMMEDIATE "azonnali" // Button immediate
#define D_INDEX "Index"
#define D_INFO "Info"
#define D_INFRARED "Infravörös"
#define D_INITIALIZED "Inicializálva"
#define D_IP_ADDRESS "IP cím"
#define D_LIGHT "Fény"
#define D_LWT "LWT"
#define D_LQI "LQI" // Zigbee Link Quality Index
#define D_MODULE "Modul"
2021-02-25 14:29:27 +00:00
#define D_MOISTURE "Páratartalom"
#define D_MQTT "MQTT"
2021-02-25 14:29:27 +00:00
#define D_MULTI_PRESS "többes lenyomás"
#define D_NOISE "Zaj"
#define D_NONE "nincs"
#define D_NOX "NOx"
2021-02-25 14:29:27 +00:00
#define D_O2 "Oxygén"
#define D_OFF "Ki"
#define D_OFFLINE "Offline"
#define D_OK "OK"
#define D_ON "Be"
#define D_ONLINE "Online"
#define D_ORP "ORP"
#define D_PASSWORD "Jelszó"
#define D_PH "pH"
#define D_MQ "MQ"
2022-05-14 16:41:52 +01:00
#define D_PARTITION "Partition" // As in flash and firmware partition
#define D_PORT "Port"
#define D_POWER_FACTOR "Teljesítménytényező"
#define D_POWERUSAGE "Energiafelhasználás"
#define D_POWERUSAGE_ACTIVE "Aktív teljesítmény"
#define D_POWERUSAGE_ACTIVE_TOTAL "Active Power Total"
#define D_POWERUSAGE_APPARENT "Látszólagos teljesítmény"
#define D_POWERUSAGE_REACTIVE "Reaktív teljesítmény"
#define D_PRESSURE "Nyomás"
#define D_PRESSUREATSEALEVEL "Tengerszinti nyomás"
#define D_PROGRAM_FLASH_SIZE "Program flash méret"
#define D_PROGRAM_SIZE "Program méret"
#define D_PROJECT "Projekt"
#define D_RAIN "Eső"
2021-02-25 14:29:27 +00:00
#define D_RANGE "Tartomány"
#define D_RECEIVED "Érkezett"
#define D_RESTART "Újraindítás"
#define D_RESTARTING "Újraindítás"
#define D_RESTART_REASON "Utolsó újraindulás oka"
2021-02-25 14:29:27 +00:00
#define D_RETAINED "megtartott"
#define D_RULE "Szabály"
#define D_SAVE "Mentés"
#define D_SENSOR "Szenzor"
#define D_SSID "SSID"
#define D_START "Start"
#define D_STD_TIME "STD"
#define D_STOP "Leállítás"
#define D_SUBNET_MASK "Alhálózati maszk"
#define D_SUBSCRIBE_TO "Feliratkozás a(z)"
2021-02-25 14:29:27 +00:00
#define D_UNSUBSCRIBE_FROM "Leiratkozás a(z)"
#define D_SUCCESSFUL "Sikeres"
#define D_SUNRISE "Napkelte"
#define D_SUNSET "Napnyugta"
#define D_TEMPERATURE "Hőmérséklet"
#define D_TO "-nak"
#define D_TOGGLE "Megfordítás"
#define D_TOPIC "Topic"
2021-02-25 14:29:27 +00:00
#define D_TOTAL_USAGE "Teljes használat"
#define D_TRANSMIT "Továbbít"
#define D_TRUE "Igaz"
#define D_TVOC "TVOC"
2023-08-27 16:24:33 +01:00
#define D_TWILIGHT_ASTRONOMICAL "Astronomical"
#define D_TWILIGHT_CIVIL "Civil"
#define D_TWILIGHT_NAUTICAL "Nautical"
#define D_UPLOAD "Feltöltés"
#define D_UPTIME "Üzemidő"
2022-05-14 16:41:52 +01:00
#define D_USED "used"
#define D_USER "Felhasználó"
#define D_UTC_TIME "UTC"
#define D_UV_INDEX "UV index"
#define D_UV_INDEX_1 "alacsony"
#define D_UV_INDEX_2 "közepes"
#define D_UV_INDEX_3 "magas"
#define D_UV_INDEX_4 "veszélyes"
#define D_UV_INDEX_5 "égés L1/2"
#define D_UV_INDEX_6 "égés L3"
#define D_UV_INDEX_7 "tartományon kívül"
#define D_UV_LEVEL "UV szint"
#define D_UV_POWER "UV teljesítmény"
#define D_VERSION "Verzió"
#define D_VOC "VOC"
#define D_VOLTAGE "Feszültség"
#define D_VOLUME "Volume"
#define D_WEIGHT "Tömeg"
#define D_WARMLIGHT "Meleg fény"
#define D_WEB_SERVER "Webszerver"
#define D_SOC "State of Charge"
#define D_SOH "State of Health"
// tasmota.ino
#define D_WARNING_MINIMAL_VERSION "VIGYÁZZ! Ez a verzió nem támogat tartós beállításokat"
#define D_LEVEL_10 "szint 1-0"
#define D_LEVEL_01 "szint 0-1"
#define D_SERIAL_LOGGING_DISABLED "Soros naplózás kikapcsolva"
#define D_SYSLOG_LOGGING_REENABLED "Syslog logolás újraengedélyezve"
#define D_SET_BAUDRATE_TO "Baudrate beállítása"
#define D_RECEIVED_TOPIC "Érkezett topic"
#define D_DATA_SIZE "Adatméret"
#define D_ANALOG_INPUT "Analóg"
// support.ino
#define D_OSWATCH "osWatch"
#define D_BLOCKED_LOOP "Tiltott hurok"
#define D_WPS_FAILED_WITH_STATUS "WPSconfig SIKERTELEN státusz:"
#define D_ACTIVE_FOR_3_MINUTES "aktválás 3 percre"
#define D_FAILED_TO_START "sikertelen indítás"
#define D_PATCH_ISSUE_2186 "Patch issue 2186"
#define D_CONNECTING_TO_AP "AP-hoz csatlakozás:"
#define D_IN_MODE "mód:"
#define D_CONNECT_FAILED_NO_IP_ADDRESS "Sikertelen csatlakozás, nincs kiosztott IP cím"
#define D_CONNECT_FAILED_AP_NOT_REACHED "Sikertelen csatlakozás, AP nem elérhető"
#define D_CONNECT_FAILED_WRONG_PASSWORD "Sikertelen csatlakozás"
#define D_CONNECT_FAILED_AP_TIMEOUT "Sikertelen csatlakozás AP időtúllépés miatt"
#define D_ATTEMPTING_CONNECTION "Csatlakozás..."
#define D_CHECKING_CONNECTION "Kapcsolat ellenőrzése..."
#define D_QUERY_DONE "Lekérés kész. MQTT szolgáltatás aktív"
#define D_MQTT_SERVICE_FOUND "élő MQTT szolgáltatás a(z)"
#define D_FOUND_AT "a(z)"
#define D_SYSLOG_HOST_NOT_FOUND "Syslog hoszt nem található"
// settings.ino
#define D_SAVED_TO_FLASH_AT "Flash-re mentve a(z)"
#define D_LOADED_FROM_FLASH_AT "Flash-ről betöltve a(z)"
#define D_USE_DEFAULTS "Alapértelmezett beáll. használata"
#define D_ERASED_SECTOR "Szektor törlése"
// xdrv_02_webserver.ino
#define D_NOSCRIPT "A Tasmota használatához engedélyezd a Javascriptet!"
#define D_SAFEBOOT "SAFEBOOT"
#define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "MINIMÁLIS firmware<br>frissítsd!"
#define D_WEBSERVER_ACTIVE_ON "Webszerver aktív:"
#define D_WITH_IP_ADDRESS "IP cím:"
#define D_WEBSERVER_STOPPED "Webszerver leállítva"
#define D_FILE_NOT_FOUND "Fájl nem található"
#define D_REDIRECTED "Átírányítás captive portálra"
#define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "WifiManager AccessPoint(AP) és Station(ST) beállítása"
#define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager AccessPoint(AP) beállítása"
#define D_TRYING_TO_CONNECT "Csatlakozás a hálózatra..."
#define D_RESTART_IN "Újraindítás..."
#define D_SECONDS "másodperc"
#define D_DEVICE_WILL_RESTART "Az eszköz hamarosan újraindul..."
#define D_BUTTON_TOGGLE "Megfordítás"
#define D_CONFIGURATION "Beállítások"
#define D_INFORMATION "Információ"
#define D_FIRMWARE_UPGRADE "Firmware frissítés"
2024-01-08 08:29:02 +00:00
#define D_MANAGEMENT "Tools"
2024-01-07 15:06:31 +00:00
#define D_GPIO_VIEWER "GPIO Viewer"
#define D_CONSOLE "Konzol"
#define D_CONFIRM_RESTART "Biztosan újraindítsam a modult?"
#define D_CONFIGURE_MODULE "Eszközbeállítások"
#define D_CONFIGURE_WIFI "WiFi konfiguráció"
#define D_CONFIGURE_MQTT "MQTT konfiguráció"
#define D_CONFIGURE_DOMOTICZ "Domoticz konfiguráció"
#define D_CONFIGURE_LOGGING "Naplózás beállításai"
#define D_CONFIGURE_OTHER "Egyéb beállítások"
#define D_CONFIRM_RESET_CONFIGURATION "Biztosan töröljem a beállításokat?"
#define D_RESET_CONFIGURATION "Beállítások törlése"
#define D_BACKUP_CONFIGURATION "Beállítások mentése"
#define D_RESTORE_CONFIGURATION "Beállítások visszatöltése"
#define D_START_RESTORE "Start restore"
#define D_MAIN_MENU "Menü"
#define D_MODULE_PARAMETERS "Modul paraméterek"
#define D_MODULE_TYPE "Alkalmazott modul"
#define D_PULLUP_ENABLE "Nincs felhúzó ellenállás"
#define D_ADC "ADC"
#define D_GPIO "GPIO"
#define D_SERIAL_IN "Soros BE"
#define D_SERIAL_OUT "Soros KI"
#define D_WIFI_PARAMETERS "WiFi paraméterek"
#define D_SCAN_FOR_WIFI_NETWORKS "WiFi hálózat keresése"
#define D_SCAN_DONE "Keresés kész"
#define D_NO_NETWORKS_FOUND "Nincs elérhető hálózat"
#define D_REFRESH_TO_SCAN_AGAIN "Frissíts az újrakereséshez"
#define D_DUPLICATE_ACCESSPOINT "Duplikált access point"
#define D_SKIPPING_LOW_QUALITY "Rossz, alacsony jelminőség"
2023-10-09 10:33:24 +01:00
#define D_MODE "Mode"
#define D_RSSI "RSSI"
#define D_WEP "WEP"
#define D_WPA_PSK "WPA PSK"
#define D_WPA2_PSK "WPA2 PSK"
2021-04-12 17:45:18 +01:00
#define D_AP1_SSID "WiFi Network"
#define D_AP1_SSID_HELP "Type or Select your WiFi Network"
#define D_AP2_SSID "WiFi Network 2"
#define D_AP2_SSID_HELP "Type your Alternative WiFi Network"
#define D_AP_PASSWORD "WiFi megosztott kulcs"
#define D_AP_PASSWORD_HELP "Enter your WiFi Password"
#define D_SELECT_YOUR_WIFI_NETWORK "Select your WiFi Network"
#define D_SHOW_MORE_WIFI_NETWORKS "Scan for all WiFi Networks"
#define D_SHOW_MORE_OPTIONS "More Options"
#define D_CHECK_CREDENTIALS "Please, check your credentials"
#define D_SUCCESSFUL_WIFI_CONNECTION "Successful WiFi Connection"
#define D_NOW_YOU_CAN_CLOSE_THIS_WINDOW "Now you can close this window"
#define D_REDIRECTING_TO_NEW_IP "Redirecting to new device's IP address"
#define D_MQTT_PARAMETERS "MQTT paraméterek"
#define D_CLIENT "Kliens"
#define D_FULL_TOPIC "Teljes topic"
#define D_LOGGING_PARAMETERS "Naplózási paraméterek"
#define D_SERIAL_LOG_LEVEL "Soros naplózási szint"
#define D_MQTT_LOG_LEVEL "Mqtt log level"
#define D_WEB_LOG_LEVEL "Web naplózási szint"
#define D_SYS_LOG_LEVEL "Syslog szint"
#define D_MORE_DEBUG "Részletes hibakeresés"
#define D_SYSLOG_HOST "Syslog hoszt"
#define D_SYSLOG_PORT "Syslog port"
#define D_TELEMETRY_PERIOD "Telemetria (mp.)"
#define D_OTHER_PARAMETERS "Egyéb beállítások"
#define D_TEMPLATE "Template"
2021-02-25 14:29:27 +00:00
#define D_ACTIVATE "Aktiválás"
#define D_DEVICE_NAME "Eszköz neve"
#define D_WEB_ADMIN_PASSWORD "Web admin jelszó"
#define D_MQTT_ENABLE "MQTT engedélyezése"
#define D_MQTT_TLS_ENABLE "MQTT TLS"
2021-08-16 23:03:04 +01:00
#define D_HTTP_API "HTTP API"
#define D_HTTP_API_ENABLE "HTTP API engedélyezése"
#define D_FRIENDLY_NAME "Név"
#define D_BELKIN_WEMO "Belkin WeMo"
#define D_HUE_BRIDGE "Hue Bridge"
#define D_SINGLE_DEVICE "single device"
#define D_MULTI_DEVICE "multi device"
2021-02-25 14:29:27 +00:00
#define D_CONFIGURE_TEMPLATE "Template beállítása"
#define D_TEMPLATE_PARAMETERS "Template paraméterek"
#define D_TEMPLATE_NAME "Név"
#define D_BASE_TYPE "Alapul ezen"
#define D_TEMPLATE_FLAGS "Opciók"
#define D_SAVE_CONFIGURATION "Beállítások mentése"
#define D_CONFIGURATION_SAVED "Beállítások elmentve"
#define D_CONFIGURATION_RESET "Beállítások visszaállítása"
#define D_PROGRAM_VERSION "Program verzió"
#define D_BUILD_DATE_AND_TIME "Build ideje"
#define D_CORE_AND_SDK_VERSION "Core/SDK verzió"
#define D_FLASH_WRITE_COUNT "Flash írások száma"
#define D_MAC_ADDRESS "MAC cím"
#define D_MQTT_HOST "MQTT hoszt"
#define D_MQTT_PORT "MQTT port"
#define D_MQTT_CLIENT "MQTT kliens"
#define D_MQTT_USER "MQTT felhasználó"
#define D_MQTT_TOPIC "MQTT topic"
#define D_MQTT_GROUP_TOPIC "MQTT csoport topic"
#define D_MQTT_FULL_TOPIC "MQTT teljes topic"
#define D_MQTT_NO_RETAIN "MQTT No Retain"
#define D_MDNS_DISCOVERY "mDNS láthatóság"
#define D_MDNS_ADVERTISE "mDNS hirdetés"
#define D_ESP_CHIP_ID "ESP chip ID"
#define D_FLASH_CHIP_ID "Flash chip ID"
#define D_FLASH_CHIP_SIZE "Flash mérete"
#define D_FREE_PROGRAM_SPACE "Szabad programhely"
#define D_UPGRADE_BY_WEBSERVER "Frissítés távoli szerverről"
#define D_OTA_URL "OTA URL"
#define D_START_UPGRADE "Frissítés"
#define D_UPGRADE_BY_FILE_UPLOAD "Frissítés helyi fájllal"
#define D_UPLOAD_FACTORY "Switching to safeboot partition"
#define D_UPLOAD_STARTED "Feltöltés elindítva"
#define D_UPGRADE_STARTED "Frissítés elindítva"
#define D_UPLOAD_DONE "Feltöltés kész"
#define D_UPLOAD_TRANSFER "Upload transfer"
#define D_TRANSFER_STARTED "Transfer started"
#define D_UPLOAD_ERR_1 "Nincs fájl kijelölve"
#define D_UPLOAD_ERR_2 "Nincs elég memória"
2020-11-19 14:43:47 +00:00
#define D_UPLOAD_ERR_3 "Invalid file signature"
#define D_UPLOAD_ERR_4 "A program flashméret nagyobb a valós flashméretnél"
#define D_UPLOAD_ERR_5 "Feltöltési buffer hiba"
#define D_UPLOAD_ERR_6 "Feltöltés sikertelen. Endegélyezd a 3. szintű naplózást"
#define D_UPLOAD_ERR_7 "Feltöltés megszakítva"
#define D_UPLOAD_ERR_8 "Érvénytelen fájl"
#define D_UPLOAD_ERR_9 "A fájl túl nagy"
#define D_UPLOAD_ERR_10 "Az RF chip inicializálása sikertelen"
#define D_UPLOAD_ERR_11 "Az RF chip törlése sikertelen"
#define D_UPLOAD_ERR_12 "Az RF chip írása sikertelen"
#define D_UPLOAD_ERR_13 "Az RF firmware dekódolása sikertelen"
2021-02-25 14:29:27 +00:00
#define D_UPLOAD_ERR_14 "Nem kompatibilis"
#define D_UPLOAD_ERROR_CODE "Feltöltési hibakód"
#define D_ENTER_COMMAND "Kérem a parancsot..."
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Engedélyezz 2-es szintű webnaplózást több információért"
#define D_NEED_USER_AND_PASSWORD "Szükséges a user=<felhasználónév>&password=<jelszó> paraméter"
// xdrv_01_mqtt.ino
#define D_FINGERPRINT "TLS fingerprint hitelesítése..."
#define D_TLS_CONNECT_FAILED_TO "TLS csatlakozás sikertelen a(z)"
#define D_RETRY_IN "Újrapróbálás"
#define D_VERIFIED "Fingerprint hitelesítve"
#define D_INSECURE "Nem biztonságos kapcsolat érvénytelen fingerprint miatt"
#define D_CONNECT_FAILED_TO "Sikertelen csatlakozás a(z)"
// xplg_wemohue.ino
#define D_MULTICAST_DISABLED "Multicast kikapcsolva"
#define D_MULTICAST_REJOINED "Multicast (újra)csatlakozás"
#define D_MULTICAST_JOIN_FAILED "Multicast csatlakozás sikertelen"
#define D_FAILED_TO_SEND_RESPONSE "Nem sikerült választ küldeni"
#define D_WEMO "WeMo"
#define D_WEMO_BASIC_EVENT "WeMo basic event"
#define D_WEMO_EVENT_SERVICE "WeMo event service"
#define D_WEMO_META_SERVICE "WeMo meta service"
#define D_WEMO_SETUP "WeMo beállítás"
#define D_RESPONSE_SENT "Válasz elküldve"
#define D_HUE "Hue"
#define D_HUE_BRIDGE_SETUP "Hue beállítás"
#define D_HUE_API_NOT_IMPLEMENTED "Hue API nincs implementálva"
#define D_HUE_API "Hue API"
#define D_HUE_POST_ARGS "Hue POST argumentumok"
#define D_3_RESPONSE_PACKETS_SENT "3 válaszcsomag elküldve"
// xdrv_07_domoticz.ino
#define D_DOMOTICZ_PARAMETERS "Domoticz paraméterek"
#define D_DOMOTICZ_IDX "Idx"
#define D_DOMOTICZ_KEY_IDX "Key idx"
#define D_DOMOTICZ_SWITCH_IDX "Kapcsoló idx"
#define D_DOMOTICZ_SENSOR_IDX "Szenzor idx"
#define D_DOMOTICZ_TEMP "Hőmérséklet"
#define D_DOMOTICZ_TEMP_HUM "Hőmérséklet, páratartalom"
#define D_DOMOTICZ_TEMP_HUM_BARO "Hőmérséklet, páratartalom, légnyomás"
#define D_DOMOTICZ_POWER_ENERGY "Teljesítmény, energia"
#define D_DOMOTICZ_ILLUMINANCE "Fényerő"
#define D_DOMOTICZ_COUNT "Szám/PM1"
#define D_DOMOTICZ_VOLTAGE "Feszültség/PM2.5"
#define D_DOMOTICZ_CURRENT "Áram/PM10"
#define D_DOMOTICZ_AIRQUALITY "Légminőség"
#define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter"
#define D_DOMOTICZ_UPDATE_TIMER "Frissítési időzítő"
// xdrv_09_timers.ino
#define D_CONFIGURE_TIMER "Időzítő beállításai"
#define D_TIMER_PARAMETERS "Időzítő paraméterei"
#define D_TIMER_ENABLE "Időzítők engedélyezve"
#define D_TIMER_ARM "Be"
#define D_TIMER_TIME "Idő"
#define D_TIMER_DAYS "Napok"
#define D_TIMER_REPEAT "Ismétlés"
#define D_TIMER_OUTPUT "Kimenet"
#define D_TIMER_ACTION "Művelet"
// xdrv_10_knx.ino
#define D_CONFIGURE_KNX "KNX beállításai"
#define D_KNX_PARAMETERS "KNX paraméterei"
#define D_KNX_GENERAL_CONFIG "Általános"
#define D_KNX_PHYSICAL_ADDRESS "Fizikai cím"
#define D_KNX_PHYSICAL_ADDRESS_NOTE "(egyedinek kell lennie a KNX hálózaton)"
#define D_KNX_ENABLE "KNX engedélyezése"
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Íráshoz használt csoportcímek"
#define D_ADD "Hozzáadás"
#define D_DELETE "Törlés"
#define D_REPLY "Válasz"
#define D_KNX_GROUP_ADDRESS_TO_READ "Fogadáshoz használt csoportcímek"
#define D_RECEIVED_FROM "Fogadva tőle:"
#define D_KNX_COMMAND_WRITE "Írás"
#define D_KNX_COMMAND_READ "Olvasás"
#define D_KNX_COMMAND_OTHER "Egyáb"
#define D_SENT_TO "küldve neki:"
#define D_KNX_WARNING "A csoportcím ( 0 / 0 / 0 ) fenntartott és nem használható."
#define D_KNX_ENHANCEMENT "Communication Enhancement"
#define D_KNX_TX_SLOT "KNX TX"
#define D_KNX_RX_SLOT "KNX RX"
2020-06-18 19:25:59 +01:00
#define D_KNX_TX_SCENE "KNX SCENE TX"
#define D_KNX_RX_SCENE "KNX SCENE RX"
2020-12-21 08:56:04 +00:00
// xdrv_23_zigbee
2021-02-25 14:29:27 +00:00
#define D_ZIGBEE_PERMITJOIN_ACTIVE "Eszközök kapcsolódhatnak"
#define D_ZIGBEE_MAPPING_TITLE "Tasmota Zigbee leképezés"
#define D_ZIGBEE_NOT_STARTED "Zigbee nincs elindítva"
#define D_ZIGBEE_MAPPING_IN_PROGRESS_SEC "Leképezés folyamatban (%d mp. van hátra)"
#define D_ZIGBEE_MAPPING_NOT_PRESENT "Nincs leképezés"
#define D_ZIGBEE_MAP_REFRESH "Zigbee térkép frissítés"
#define D_ZIGBEE_MAP "Zigbee térkép"
#define D_ZIGBEE_PERMITJOIN "Zigbee kapcsolódási engedély"
#define D_ZIGBEE_GENERATE_KEY "véletlen Zigbee hálózati kulcs generálása"
#define D_ZIGBEE_UNKNOWN_DEVICE "Ismeretlen eszköz"
#define D_ZIGBEE_UNKNOWN_ATTRIBUTE "Ismeretlen tulajdonság"
2022-10-02 19:54:49 +01:00
#define D_ZIGBEE_UNKNOWN_ENDPOINT "Unknown endpoint"
2021-02-25 14:29:27 +00:00
#define D_ZIGBEE_INVALID_PARAM "Érvénytelen paraméter"
#define D_ZIGBEE_MISSING_PARAM "Hiányzó paraméter(ek)"
#define D_ZIGBEE_UNKNWON_ATTRIBUTE "Ismeretlen tulajdonság név (kihagyva): %s"
#define D_ZIGBEE_TOO_MANY_CLUSTERS "Egynél több klaszter id nem lehet parancsonként"
2022-10-02 19:54:49 +01:00
#define D_ZIGBEE_CONFLICTING_ENDPOINTS "Conflicting destination endpoints"
2021-02-25 14:29:27 +00:00
#define D_ZIGBEE_WRONG_DELIMITER "Hibás adatcsomag elválasztó"
#define D_ZIGBEE_UNRECOGNIZED_COMMAND "Nem értelmezhető Zigbee parancs: %s"
#define D_ZIGBEE_TOO_MANY_COMMANDS "Csak egy parancs engedélyezett (%d)"
#define D_ZIGBEE_NO_ATTRIBUTE "A tulajdonság nincs a listában"
#define D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE "Nem támogatott tulajdonság típus"
#define D_ZIGBEE_JSON_REQUIRED "Beállítás JSON objektumot vár"
#define D_ZIGBEE_RESET_1_OR_2 "1 vagy 2 a visszaállításhoz"
#define D_ZIGBEE_EEPROM_FOUND_AT_ADDRESS "ZBBridge EEPROM található a címen"
#define D_ZIGBEE_RANDOMIZING_ZBCONFIG "Zigbee paramétereknek véletlennek kell lenniük, ellenőrizd a 'ZbConfig'-gal"
2020-12-21 08:56:04 +00:00
2022-10-28 15:08:02 +01:00
// xdrv_89_dali.ino
#define D_SENSOR_DALI_RX "Dali RX"
#define D_SENSOR_DALI_TX "Dali TX"
#define D_CONFIGURE_DALI "Config DALI"
// xdrv_03_energy.ino
#define D_ENERGY_TODAY "Mai energia"
#define D_ENERGY_YESTERDAY "Tegnapi energia"
#define D_ENERGY_TOTAL "Összes energia"
2024-03-14 15:40:22 +00:00
// xsns_100_ina3221.ino
#define D_UNIT_CHARGE "Ah"
#define D_CHARGE "Charge"
#define D_ENERGY "Energy"
// xdrv_27_shutter.ino
2021-02-25 14:29:27 +00:00
#define D_OPEN "Nyitva"
#define D_CLOSE "Zárva"
#define D_DOMOTICZ_SHUTTER "Redőny"
// xdrv_28_pcf8574.ino
2021-02-25 14:29:27 +00:00
#define D_CONFIGURE_PCF8574 "PCF8574 beállítása"
#define D_PCF8574_PARAMETERS "PCF8574 paraméterei"
#define D_INVERT_PORTS "Inverz portok"
#define D_DEVICE "Eszköz"
#define D_DEVICE_INPUT "Bemenet"
#define D_DEVICE_OUTPUT "Kimenet"
// xdrv_39_thermostat.ino, xdrv_85_esp32_ble_eq3_trv.ino
#define D_THERMOSTAT "Thermostat"
#define D_THERMOSTAT_SET_POINT "Set Point Temperature"
#define D_THERMOSTAT_SENSOR "Current Temperature"
#define D_THERMOSTAT_GRADIENT "Gradient Temperature"
#define D_THERMOSTAT_DUTY_CYCLE "Duty cycle"
#define D_THERMOSTAT_VALVE_POSITION "Valve Position"
#define D_THERMOSTAT_CYCLE_TIME "Cycle time"
#define D_THERMOSTAT_PI_AUTOTUNE "PI Auto tuning"
#define D_THERMOSTAT_CONTROL_METHOD "Control method"
#define D_THERMOSTAT_RAMP_UP "Ramp up"
#define D_THERMOSTAT_PI "PI"
#define D_THERMOSTAT_AUTOTUNE "Autotune"
#define D_THERMOSTAT_RAMP_UP_HYBRID "Ramp up (Hybrid)"
#define D_THERMOSTAT_PI_HYBRID "PI (Hybrid)"
#define D_THERMOSTAT_AUTOTUNE_HYBRID "Autotune (Hybrid)"
// xsns_05_ds18b20.ino
#define D_SENSOR_BUSY "Szenzor foglalt"
#define D_SENSOR_CRC_ERROR "Szenzor CRC hiba"
#define D_SENSORS_FOUND "Szenzorok megtalálva"
// xsns_06_dht.ino
#define D_TIMEOUT_WAITING_FOR "Időtúllépés, várakozás"
#define D_START_SIGNAL_LOW "startjel alacsony"
#define D_START_SIGNAL_HIGH "startjel magas"
#define D_PULSE "impulzus"
#define D_CHECKSUM_FAILURE "Checksum hiba"
// xsns_07_sht1x.ino
#define D_SENSOR_DID_NOT_ACK_COMMAND "A szenzor nem nyugtázta a parancsot"
#define D_SHT1X_FOUND "SHT1X megtalálva"
// xsns_18_pms5003.ino
#define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter
#define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter
#define D_PARTICALS_BEYOND "Részecskék"
// xsns_27_apds9960.ino
#define D_GESTURE "Gesztus"
2021-02-25 14:29:27 +00:00
#define D_COLOR_RED "Piros (R)"
#define D_COLOR_GREEN "Zöld (G)"
#define D_COLOR_BLUE "Kék (B)"
#define D_CCT "CCT"
#define D_PROXIMITY "közelség"
// xsns_32_mpu6050.ino
#define D_AX_AXIS "Gyorsulásm. X-tengely"
#define D_AY_AXIS "Gyorsulásm. Y-tengely"
#define D_AZ_AXIS "Gyorsulásm. Z-tengely"
#define D_GX_AXIS "Giroszkóp X-tengely"
#define D_GY_AXIS "Giroszkóp Y-tengely"
#define D_GZ_AXIS "Giroszkóp Z-tengely"
2022-10-02 22:44:40 +01:00
// xsns_33_QMC5883L.ino
#define D_MX "Induction X-Axis"
#define D_MY "Induction Y-Axis"
#define D_MZ "Induction Z-Axis"
#define D_MAGNETICFLD "Magnetic Induction"
2022-10-02 22:44:40 +01:00
// xsns_34_hx711.ino
#define D_HX_CAL_REMOVE "Távolítsa el a súlyt"
#define D_HX_CAL_REFERENCE "Helyezze fel a referenciasúlyt"
#define D_HX_CAL_DONE "Kalibrálva"
#define D_HX_CAL_FAIL "Kalibrálási hiba"
#define D_RESET_HX711 "Skála újrabeállítása"
#define D_CONFIGURE_HX711 "Skála konfigurálása"
#define D_HX711_PARAMETERS "Skálaparaméterek"
#define D_ITEM_WEIGHT "Tárgy tömege"
#define D_REFERENCE_WEIGHT "Referenciatömeg"
#define D_CALIBRATE "Kalibrálás"
#define D_CALIBRATION "Kalibrálás"
//xsns_35_tx20.ino
#define D_TX20_WIND_DIRECTION "Szélirány"
#define D_TX20_WIND_SPEED "Szélsebesség"
#define D_TX20_WIND_SPEED_MIN "Min. szélsebesség"
#define D_TX20_WIND_SPEED_MAX "Max. szélsebesség"
#define D_TX20_NORTH "É"
#define D_TX20_EAST "K"
#define D_TX20_SOUTH "D"
#define D_TX20_WEST "NY"
// xsns_53_sml.ino
2021-02-25 14:29:27 +00:00
#define D_TPWRIN "Összes bejövő energia"
2021-04-28 06:57:05 +01:00
#define D_TPWRIN0 "Összes bejövő energia T0"
#define D_TPWRIN1 "Összes bejövő energia T1"
2021-02-25 14:29:27 +00:00
#define D_TPWROUT "Összes kimenő energia"
#define D_TPWRCURR "Aktív teljesítmény Be/Ki"
#define D_TPWRCURR1 "Aktív teljesítmény-Be p1"
#define D_TPWRCURR2 "Aktív teljesítmény-Be p2"
#define D_TPWRCURR3 "Aktív teljesítmény-Be p3"
#define D_Strom_L1 "Áramerősség L1"
#define D_Strom_L2 "Áramerősség L2"
#define D_Strom_L3 "Áramerősség L3"
#define D_Spannung_L1 "Feszültség L1"
#define D_Spannung_L2 "Feszültség L2"
#define D_Spannung_L3 "Feszültség L3"
2020-03-14 18:31:20 +00:00
#define D_METERNR "Meter_number"
#define D_METERSID "Service ID"
2021-02-25 14:29:27 +00:00
#define D_GasIN "Számláló"
#define D_H2oIN "Számláló"
#define D_StL1L2L3 "Áramerősség L1+L2+L3"
#define D_SpL1L2L3 "Feszültség L1+L2+L3/3"
2020-03-14 18:31:20 +00:00
// xsns_86_tfminiplus.ino
#define D_SIGNALSTRENGTH "Signal Strength"
#define D_CHIPTEMPERATURE "Chip Temperature"
// tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
#define D_SENSOR_NONE "Nincs"
#define D_SENSOR_USER "User"
#define D_SENSOR_OPTION "Option"
#define D_SENSOR_DHT11 "DHT11"
#define D_SENSOR_AM2301 "AM2301"
#define D_SENSOR_SI7021 "SI7021"
#define D_SENSOR_MS01 "MS01"
#define D_SENSOR_DS18X20 "DS18x20"
#define D_SENSOR_I2C_SCL "I2C SCL"
#define D_SENSOR_I2C_SDA "I2C SDA"
2022-07-11 14:49:57 +01:00
#define D_SENSOR_I2S_MCLK "I2S MCLK"
#define D_SENSOR_I2S_BCLK "I2S BCLK"
#define D_SENSOR_I2S_WS_IN "I2S BCLK IN"
#define D_SENSOR_I2S_WS "I2S WS"
#define D_SENSOR_I2S_BCLK_IN "I2S WS IN"
#define D_SENSOR_I2S_DIN "I2S DIN"
#define D_SENSOR_I2S_DOUT "I2S DOUT"
#define D_SENSOR_I2S_DAC "I2S DAC"
2023-09-01 20:46:18 +01:00
#define D_SENSOR_HDMI_CEC "HDMI CEC"
#define D_SENSOR_WS2812 "WS2812"
#define D_SENSOR_DFR562 "MP3 lejátszó"
2022-06-23 15:39:10 +01:00
#define D_SENSOR_DFR562_BUSY "MP3 elfoglalt"
#define D_SENSOR_IRSEND "IR adó"
#define D_SENSOR_SWITCH "Kapcsoló" // Suffix "1"
#define D_SENSOR_BUTTON "Gomb" // Suffix "1"
#define D_SENSOR_RELAY "Relé" // Suffix "1i"
#define D_SENSOR_LED "LED" // Suffix "1i"
#define D_SENSOR_LED_LINK "LedLink" // Suffix "i"
#define D_SENSOR_PWM "PWM" // Suffix "1"
#define D_SENSOR_COUNTER "Számláló" // Suffix "1"
2021-05-25 19:14:15 +01:00
#define D_SENSOR_INTERRUPT "Interrupt"
#define D_SENSOR_INPUT "Input"
#define D_SENSOR_IRRECV "IR vevő"
#define D_SENSOR_MHZ_RX "MHZ Rx"
#define D_SENSOR_MHZ_TX "MHZ Tx"
#define D_SENSOR_HC8_RX "HC8 Rx"
#define D_SENSOR_PZEM004_RX "PZEM004 Rx"
#define D_SENSOR_PZEM016_RX "PZEM016 Rx"
#define D_SENSOR_PZEM017_RX "PZEM017 Rx"
#define D_SENSOR_PZEM0XX_TX "PZEM0XX Tx"
#define D_SENSOR_SAIR_RX "SAir Rx"
#define D_SENSOR_SAIR_TX "SAir Tx"
#define D_SENSOR_SPI_CS "SPI CS"
#define D_SENSOR_SPI_DC "SPI DC"
#define D_SENSOR_SPI_MISO "SPI MISO"
#define D_SENSOR_SPI_MOSI "SPI MOSI"
#define D_SENSOR_SPI_CLK "SPI CLK"
2022-04-19 18:17:04 +01:00
#define D_SENSOR_SDIO_CMD "SDIO CMD"
#define D_GPIO_TS_SPI_CS "TS SPI CS"
#define D_GPIO_TS_RST "TS RST"
#define D_GPIO_TS_IRQ "TS IRQ"
#define D_SENSOR_SDIO_CMD "SDIO CMD"
2022-04-19 18:17:04 +01:00
#define D_SENSOR_SDIO_CLK "SDIO CLK"
#define D_SENSOR_SDIO_D0 "SDIO D0"
#define D_SENSOR_SDIO_D1 "SDIO D1"
#define D_SENSOR_SDIO_D2 "SDIO D2"
#define D_SENSOR_SDIO_D3 "SDIO D3"
#define D_SENSOR_BACKLIGHT "Háttérfény"
#define D_SENSOR_PMS5003_TX "PMS5003 Tx"
#define D_SENSOR_PMS5003_RX "PMS5003 Rx"
#define D_SENSOR_SDS0X1_RX "SDS0X1 Rx"
#define D_SENSOR_SDS0X1_TX "SDS0X1 Tx"
#define D_SENSOR_HPMA_RX "HPMA Rx"
#define D_SENSOR_HPMA_TX "HPMA Tx"
#define D_SENSOR_SBR_RX "SerBr Rx"
#define D_SENSOR_SBR_TX "SerBr Tx"
2022-07-19 09:37:03 +01:00
#define D_SENSOR_MBR_TX "ModBr Tx"
#define D_SENSOR_MBR_RX "ModBr Rx"
#define D_SENSOR_MBR_TX_ENA "ModBr Tx Ena"
#define D_SENSOR_SR04_TRIG "SR04 Tri/TX"
#define D_SENSOR_SR04_ECHO "SR04 Ech/RX"
#define D_SENSOR_NRG_MBS_TX "NrgMbs Tx"
#define D_SENSOR_NRG_MBS_RX "NrgMbs Rx"
#define D_SENSOR_NRG_MBS_TX_ENA "NrgMbs Tx Ena"
2021-02-09 15:13:40 +00:00
#define D_SENSOR_SDM72_TX "SDM72 Tx"
#define D_SENSOR_SDM72_RX "SDM72 Rx"
#define D_SENSOR_SDM120_TX "SDMx20 Tx"
#define D_SENSOR_SDM120_RX "SDMx20 Rx"
#define D_SENSOR_SDM230_TX "SDM230 Tx"
#define D_SENSOR_SDM230_RX "SDM230 Rx"
#define D_SENSOR_SDM630_TX "SDM630 Tx"
#define D_SENSOR_SDM630_RX "SDM630 Rx"
#define D_SENSOR_WE517_TX "WE517 Tx"
#define D_SENSOR_WE517_RX "WE517 Rx"
2022-11-22 11:35:30 +00:00
#define D_SENSOR_LD2410_TX "LD2410 Tx"
#define D_SENSOR_LD2410_RX "LD2410 Rx"
2022-07-04 09:46:35 +01:00
#define D_GPIO_TM1621_CS "TM1621 CS"
#define D_GPIO_TM1621_WR "TM1621 WR"
#define D_GPIO_TM1621_RD "TM1621 RD"
#define D_GPIO_TM1621_DAT "TM1621 DAT"
#define D_SENSOR_TM1637_CLK "TM1637 CLK"
#define D_SENSOR_TM1637_DIO "TM1637 DIO"
#define D_SENSOR_TM1638_CLK "TM1638 CLK"
#define D_SENSOR_TM1638_DIO "TM1638 DIO"
#define D_SENSOR_TM1638_STB "TM1638 STB"
#define D_SENSOR_MAX7219_DIN "MAX7219 DIN"
#define D_SENSOR_MAX7219_CS "MAX7219 CS"
#define D_SENSOR_MAX7219_CLK "MAX7219 CLK"
#define D_SENSOR_HX711_SCK "HX711 SCK"
#define D_SENSOR_HX711_DAT "HX711 DAT"
2020-12-22 19:51:03 +00:00
#define D_SENSOR_FTC532 "FTC532"
2021-01-07 15:39:41 +00:00
#define D_SENSOR_BS814_CLK "BS814 CLK"
#define D_SENSOR_BS814_DAT "BS814 DAT"
#define D_SENSOR_TX2X_TX "TX2x"
#define D_SENSOR_RFSEND "RFSend"
#define D_SENSOR_RFRECV "RFrecv"
#define D_SENSOR_TUYA_TX "Tuya Tx"
#define D_SENSOR_TUYA_RX "Tuya Rx"
#define D_SENSOR_MGC3130_XFER "MGC3130 Xfr"
#define D_SENSOR_MGC3130_RESET "MGC3130 Rst"
#define D_SENSOR_SSPI_MISO "SSPI MISO"
#define D_SENSOR_SSPI_MOSI "SSPI MOSI"
#define D_SENSOR_SSPI_SCLK "SSPI SCLK"
#define D_SENSOR_SSPI_CS "SSPI CS"
#define D_SENSOR_SSPI_DC "SSPI DC"
#define D_SENSOR_RF_SENSOR "RF Sensor"
#define D_SENSOR_AZ_RX "AZ Rx"
#define D_SENSOR_AZ_TX "AZ Tx"
#define D_SENSOR_MAX31855_CS "MX31855 CS"
#define D_SENSOR_MAX31855_CLK "MX31855 CLK"
#define D_SENSOR_MAX31855_DO "MX31855 DO"
2020-08-23 11:24:35 +01:00
#define D_SENSOR_MAX31865_CS "MX31865 CS"
2024-03-30 15:42:57 +00:00
#define D_GPIO_RN2XX3_TX "RN2XX3 Tx"
#define D_GPIO_RN2XX3_RX "RN2XX3 Rx"
#define D_GPIO_RN2XX3_RST "RN2XX3 Rst"
2024-02-23 13:58:39 +00:00
#define D_GPIO_LORA_CS "LoRa CS"
#define D_GPIO_LORA_RST "LoRa Rst"
2024-02-23 15:20:09 +00:00
#define D_GPIO_LORA_BUSY "LoRa Busy"
2024-03-30 15:42:57 +00:00
#define D_GPIO_LORA_DI "LoRa DIO" // Suffix "0","1","2"
#define D_SENSOR_NRG_SEL "HLWBL SEL" // Suffix "i"
#define D_SENSOR_NRG_CF1 "HLWBL CF1"
#define D_SENSOR_HLW_CF "HLW8012 CF"
#define D_SENSOR_HJL_CF "BL0937 CF"
#define D_SENSOR_MCP39F5_TX "MCP39F5 Tx"
#define D_SENSOR_MCP39F5_RX "MCP39F5 Rx"
#define D_SENSOR_MCP39F5_RST "MCP39F5 Rst"
2021-03-01 17:22:26 +00:00
#define D_SENSOR_CSE7761_TX "CSE7761 Tx"
#define D_SENSOR_CSE7761_RX "CSE7761 Rx"
#define D_SENSOR_CSE7766_TX "CSE7766 Tx"
#define D_SENSOR_CSE7766_RX "CSE7766 Rx"
#define D_SENSOR_BL0939_RX "BL0939 Rx"
#define D_SENSOR_BL0942_RX "BL0942 Rx"
#define D_SENSOR_HM330X_SET "HM330X SET"
#define D_SENSOR_PN532_TX "PN532 Tx"
#define D_SENSOR_PN532_RX "PN532 Rx"
#define D_SENSOR_SM16716_CLK "SM16716 CLK"
#define D_SENSOR_SM16716_DAT "SM16716 DAT"
#define D_SENSOR_SM16716_POWER "SM16716 PWR"
#define D_SENSOR_P9813_CLK "P9813 Clk"
#define D_SENSOR_P9813_DAT "P9813 Dat"
#define D_SENSOR_MY92X1_DI "MY92x1 DI"
#define D_SENSOR_MY92X1_DCKI "MY92x1 DCKI"
#define D_SENSOR_ARIRFRCV "ALux IrRcv"
#define D_SENSOR_ARIRFSEL "ALux IrSel"
#define D_SENSOR_TXD "Serial Tx"
#define D_SENSOR_RXD "Serial Rx"
#define D_SENSOR_ROTARY "Rotary" // Suffix "1A"
#define D_SENSOR_HRE_CLOCK "HRE Clock"
#define D_SENSOR_HRE_DATA "HRE Data"
2022-03-05 14:09:17 +00:00
#define D_SENSOR_ADE7880_IRQ "ADE7880 IRQ"
#define D_SENSOR_ADE7953_IRQ "ADE7953 IRQ"
#define D_SENSOR_ADE7953_RST "ADE7953 RST"
2022-10-21 14:06:52 +01:00
#define D_SENSOR_ADE7953_CS "ADE7953 CS"
#define D_SENSOR_BUZZER "Buzzer"
2021-05-25 18:26:40 +01:00
#define D_SENSOR_DISP_RESET "Display Rst"
#define D_SENSOR_ZIGBEE_TXD "Zigbee Tx"
#define D_SENSOR_ZIGBEE_RXD "Zigbee Rx"
2020-07-22 09:07:07 +01:00
#define D_SENSOR_ZIGBEE_RST "Zigbee Rst"
#define D_SENSOR_SOLAXX1_TX "SolaxX1 Tx"
#define D_SENSOR_SOLAXX1_RX "SolaxX1 Rx"
#define D_SENSOR_SOLAXX1_RTS "SolaxX1 RTS"
#define D_SENSOR_IBEACON_TX "iBeacon TX"
#define D_SENSOR_IBEACON_RX "iBeacon RX"
#define D_SENSOR_RDM6300_RX "RDM6300 RX"
#define D_SENSOR_CC1101_CS "CC1101 CS"
#define D_SENSOR_A4988_DIR "A4988 DIR"
#define D_SENSOR_A4988_STP "A4988 STP"
#define D_SENSOR_A4988_ENA "A4988 ENA"
#define D_SENSOR_A4988_MS1 "A4988 MS1"
#define D_SENSOR_OUTPUT_HI "Output Hi"
#define D_SENSOR_OUTPUT_LO "Output Lo"
#define D_SENSOR_AS608_TX "AS608 Tx"
#define D_SENSOR_AS608_RX "AS608 Rx"
2023-04-27 16:44:33 +01:00
#define D_SENSOR_GM861_TX "GM861 Tx"
#define D_SENSOR_GM861_RX "GM861 Rx"
#define D_SENSOR_DDS2382_TX "DDS238-2 Tx"
#define D_SENSOR_DDS2382_RX "DDS238-2 Rx"
#define D_SENSOR_DDSU666_TX "DDSU666 Tx"
#define D_SENSOR_DDSU666_RX "DDSU666 Rx"
#define D_SENSOR_SM2135_CLK "SM2135 Clk"
#define D_SENSOR_SM2135_DAT "SM2135 Dat"
#define D_SENSOR_SM2335_CLK "SM2335 Clk"
#define D_SENSOR_SM2335_DAT "SM2335 Dat"
#define D_SENSOR_BP1658CJ_CLK "BP1658CJ Clk"
#define D_SENSOR_BP1658CJ_DAT "BP1658CJ Dat"
#define D_SENSOR_BP5758D_CLK "BP5758D Clk"
#define D_SENSOR_BP5758D_DAT "BP5758D Dat"
#define D_SENSOR_DEEPSLEEP "DeepSleep"
#define D_SENSOR_EXS_ENABLE "EXS Enable"
#define D_SENSOR_CLIENT_TX "Client TX"
#define D_SENSOR_CLIENT_RX "Client RX"
#define D_SENSOR_CLIENT_RESET "Client RST"
2019-12-17 02:16:25 +00:00
#define D_SENSOR_GPS_RX "GPS RX"
#define D_SENSOR_GPS_TX "GPS TX"
2020-02-06 16:05:37 +00:00
#define D_SENSOR_HM10_RX "HM10 RX"
#define D_SENSOR_HM10_TX "HM10 TX"
#define D_SENSOR_LE01MR_RX "LE-01MR Rx"
#define D_SENSOR_LE01MR_TX "LE-01MR Tx"
#define D_SENSOR_BL0940_RX "BL0940 Rx"
2020-02-27 20:31:19 +00:00
#define D_SENSOR_CC1101_GDO0 "CC1101 GDO0"
#define D_SENSOR_CC1101_GDO2 "CC1101 GDO2"
#define D_SENSOR_HRXL_RX "HRXL Rx"
#define D_SENSOR_DYP_RX "DYP Rx"
2020-03-18 10:24:56 +00:00
#define D_SENSOR_ELECTRIQ_MOODL "MOODL Tx"
2020-05-05 17:36:12 +01:00
#define D_SENSOR_AS3935 "AS3935"
#define D_SENSOR_WINDMETER_SPEED "WindMeter Spd"
#define D_SENSOR_TELEINFO_RX "TInfo Rx"
#define D_SENSOR_TELEINFO_ENABLE "TInfo EN"
#define D_SENSOR_LMT01_PULSE "LMT01 Pulse"
#define D_SENSOR_ADC_INPUT "ADC Input"
#define D_SENSOR_ADC_TEMP "ADC Temp"
#define D_SENSOR_ADC_LIGHT "ADC Light"
#define D_SENSOR_ADC_BUTTON "ADC Button"
#define D_SENSOR_ADC_RANGE "ADC Range"
#define D_SENSOR_ADC_CT_POWER "ADC CT Power"
#define D_SENSOR_ADC_JOYSTICK "ADC Joystick"
#define D_SENSOR_ADC_PH "ADC pH"
#define D_SENSOR_ADC_MQ "ADC MQ"
2020-05-05 17:36:12 +01:00
#define D_GPIO_WEBCAM_PWDN "CAM_PWDN"
#define D_GPIO_WEBCAM_RESET "CAM_RESET"
#define D_GPIO_WEBCAM_XCLK "CAM_XCLK"
#define D_GPIO_WEBCAM_SIOD "CAM_SIOD"
#define D_GPIO_WEBCAM_SIOC "CAM_SIOC"
#define D_GPIO_WEBCAM_DATA "CAM_DATA"
#define D_GPIO_WEBCAM_VSYNC "CAM_VSYNC"
#define D_GPIO_WEBCAM_HREF "CAM_HREF"
#define D_GPIO_WEBCAM_PCLK "CAM_PCLK"
#define D_GPIO_WEBCAM_PSCLK "CAM_PSCLK"
#define D_GPIO_WEBCAM_HSD "CAM_HSD"
#define D_GPIO_WEBCAM_PSRCS "CAM_PSRCS"
#define D_SENSOR_ETH_PHY_POWER "ETH POWER"
#define D_SENSOR_ETH_PHY_MDC "ETH MDC"
#define D_SENSOR_ETH_PHY_MDIO "ETH MDIO"
#define D_SENSOR_TCP_TXD "TCP Tx"
2024-04-24 18:53:01 +01:00
#define D_SENSOR_TCP_TXD_EN "TCP Tx En"
#define D_SENSOR_TCP_RXD "TCP Rx"
#define D_SENSOR_IEM3000_TX "iEM3000 TX"
#define D_SENSOR_IEM3000_RX "iEM3000 RX"
#define D_SENSOR_MIEL_HVAC_TX "MiEl HVAC Tx"
#define D_SENSOR_MIEL_HVAC_RX "MiEl HVAC Rx"
#define D_SENSOR_PROJECTOR_CTRL_TX "DLP Tx"
#define D_SENSOR_PROJECTOR_CTRL_RX "DLP Rx"
#define D_SENSOR_SHELLY_DIMMER_BOOT0 "SHD Boot 0"
#define D_SENSOR_SHELLY_DIMMER_RST_INV "SHD Reset"
2020-11-30 11:52:59 +00:00
#define D_SENSOR_RC522_RST "RC522 Rst"
2020-12-29 11:06:47 +00:00
#define D_SENSOR_RC522_CS "RC522 CS"
#define D_SENSOR_NRF24_CS "NRF24 CS"
#define D_SENSOR_NRF24_DC "NRF24 DC"
2021-02-28 17:27:32 +00:00
#define D_SENSOR_XPT2046_CS "XPT2046 CS"
2020-12-29 11:06:47 +00:00
#define D_SENSOR_ILI9341_CS "ILI9341 CS"
#define D_SENSOR_ILI9341_DC "ILI9341 DC"
#define D_SENSOR_ILI9488_CS "ILI9488 CS"
#define D_SENSOR_EPAPER29_CS "EPaper29 CS"
#define D_SENSOR_EPAPER42_CS "EPaper42 CS"
#define D_SENSOR_SSD1351_CS "SSD1351 CS"
2021-02-28 15:09:57 +00:00
#define D_SENSOR_SSD1351_DC "SSD1351 DC"
2020-12-29 11:06:47 +00:00
#define D_SENSOR_RA8876_CS "RA8876 CS"
#define D_SENSOR_ST7789_CS "ST7789 CS"
#define D_SENSOR_ST7789_DC "ST7789 DC"
2021-01-01 15:05:06 +00:00
#define D_SENSOR_SSD1331_CS "SSD1331 CS"
#define D_SENSOR_SSD1331_DC "SSD1331 DC"
2021-01-04 14:03:56 +00:00
#define D_SENSOR_SDCARD_CS "SDCard CS"
#define D_SENSOR_WIEGAND_D0 "Wiegand D0"
#define D_SENSOR_WIEGAND_D1 "Wiegand D1"
2021-01-20 12:56:57 +00:00
#define D_SENSOR_NEOPOOL_TX "NeoPool Tx"
#define D_SENSOR_NEOPOOL_RX "NeoPool Rx"
2022-03-11 22:12:57 +00:00
#define D_SENSOR_VL53LXX_XSHUT "VL53LXX XSHUT"
#define D_SENSOR_TFMINIPLUS_TX "TFmini+ TX"
#define D_SENSOR_TFMINIPLUS_RX "TFmini+ RX"
2021-03-23 14:17:32 +00:00
#define D_SENSOR_ZEROCROSS "ZC Pulse"
#define D_SENSOR_HALLEFFECT "HallEffect"
2021-04-09 16:05:22 +01:00
#define D_SENSOR_EPD_DATA "EPD Data"
#define D_SENSOR_PCF8574_INT "PCF8574 Int"
2023-02-18 21:56:53 +00:00
#define D_SENSOR_MCP23XXX_INT "MCP23xxx Int"
#define D_SENSOR_MCP23SXX_CS "MCP23Sxx CS"
#define D_SENSOR_MCP2515_CS "MCP2515 CS"
#define D_SENSOR_HRG15_RX "HRG15 Rx"
#define D_SENSOR_HRG15_TX "HRG15 Tx"
#define D_SENSOR_VINDRIKTNING_RX "VINDRIKTNING"
#define D_SENSOR_BL6523_TX "BL6523 Tx"
#define D_SENSOR_BL6523_RX "BL6523 Rx"
2021-11-03 10:58:05 +00:00
#define D_SENSOR_HEARTBEAT "Heartbeat"
#define D_SENSOR_RESET "Reset"
2021-12-05 13:49:49 +00:00
#define D_GPIO_SHIFT595_SRCLK "74x595 SRCLK"
#define D_GPIO_SHIFT595_RCLK "74x595 RCLK"
#define D_GPIO_SHIFT595_OE "74x595 OE"
#define D_GPIO_SHIFT595_SER "74x595 SER"
2022-10-29 20:38:22 +01:00
#define D_GPIO_DINGTIAN_CLK "Dingtian CLK"
#define D_GPIO_DINGTIAN_SDI "Dingtian SDI"
#define D_GPIO_DINGTIAN_Q7 "Dingtian Q7"
#define D_GPIO_DINGTIAN_PL "Dingtian PL"
#define D_GPIO_DINGTIAN_OE "Dingtian OE"
2022-10-29 20:38:22 +01:00
#define D_GPIO_DINGTIAN_RCK "Dingtian RCK"
#define D_SENSOR_CM11_TX "CM110x TX"
#define D_SENSOR_CM11_RX "CM110x RX"
2022-04-27 16:23:34 +01:00
#define D_SENSOR_FLOWRATEMETER "Flowrate"
Adding support for ME007-ULS narrow FoV ultrasonic distance sensor (#17376) * Squashed commit of the following: commit 1441459a47cff0a43aa61ce47510585ee03649f3 Merge: a9fcbd342 7e27945e5 Author: Mathias Buder <mathias_buder@bose.com> Date: Tue Dec 13 09:00:06 2022 +0100 Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor commit a9fcbd3428445eb914816f608e064568d16b41e9 Merge: 7bb1049f5 d83119897 Author: Mathias Buder <mathias.buder@gmail.com> Date: Mon Dec 12 10:33:06 2022 +0100 Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor commit 7bb1049f51da8d064462b9499ed479a7675b368e Merge: 83a5afa7a eee86f01a Author: Mathias Buder <mathias.buder@gmail.com> Date: Fri Dec 9 09:30:29 2022 +0100 Merge remote-tracking branch 'github/development' into me007-narrow-fov-ultrasonic-sensor commit 83a5afa7ad27fcde1e67008e41a9bfd9c680cccd Author: Mathias Buder <mathias.buder@gmail.com> Date: Thu Dec 8 14:47:13 2022 +0100 [ME007] Added driver version number to MQTT message, small delay between consecutive measurement commit 9b8667843154f02a23020e655d806ed76ae2e530 Merge: 39180f345 de408921e Author: Mathias Buder <mathias.buder@gmail.com> Date: Thu Dec 8 10:12:45 2022 +0100 Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor commit 39180f3451fce5f06504195faea0124d73dac1ee Author: Mathias Buder <mathias.buder@gmail.com> Date: Wed Dec 7 16:41:26 2022 +0100 [ME007] Added median filter commit 01b68e0e6ca147ac03b63b8c71d035563e3bf13b Author: Mathias Buder <mathias.buder@gmail.com> Date: Mon Dec 5 23:08:57 2022 +0100 [ME007] Simplified state maschine within me007_measure() commit 1c74c6ed3e4097f09792a48420b2016c92e10353 Author: Mathias Buder <mathias.buder@gmail.com> Date: Mon Dec 5 22:21:16 2022 +0100 [ME007] Fixed issues from previous pull-request commit 25b667120fd8d70fcfed36de44f1b7a17d0686be Merge: 01e0b1809 e7d40b8d1 Author: Mathias Buder <mathias.buder@gmail.com> Date: Mon Dec 5 10:46:25 2022 +0100 Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor # Conflicts: # tasmota/include/tasmota_template.h commit 01e0b18096bfffc67673e25152114694caaf110a Author: Mathias Buder <mathias.buder@gmail.com> Date: Sun Dec 4 20:53:39 2022 +0100 [ME007] Minor changes commit ec00c9b85d223b78586c464bb92d1c7894357a40 Author: Mathias Buder <mathias.buder@gmail.com> Date: Fri Dec 2 13:08:06 2022 +0100 [ME007] Added some measurement error statistics commit c5cf65f82c42195752a88fd1553c74ab68c39cb2 Author: Mathias Buder <mathias.buder@gmail.com> Date: Thu Dec 1 22:38:07 2022 +0100 [ME007] Fixed MQTT message commit ae07d8dd77db47e20578f655ec057a63b30e65ce Author: Mathias Buder <mathias.buder@gmail.com> Date: Thu Dec 1 21:56:20 2022 +0100 [ME007] Minor code refactoring commit d2b43ca70c716e1b637b9efd3b536506233e5365 Merge: 292f5f6c8 816fd78fb Author: Mathias Buder <mathias.buder@gmail.com> Date: Thu Dec 1 16:48:38 2022 +0100 Merge branch 'development' into me007-narrow-fov-ultrasonic-sensor commit 292f5f6c81f1659eb225271cdd025eb77da02c6f Author: Mathias Buder <mathias.buder@gmail.com> Date: Thu Dec 1 16:47:03 2022 +0100 [ME007] Added logic to detect sensor at boot and during runtime commit f17af404fee76bf63b30ed3c9d2175c4e01c03ca Author: Mathias Buder <mathias.buder@gmail.com> Date: Thu Dec 1 12:32:19 2022 +0100 [ME007] Added missing define into language files commit 7a271abeca36139a43ef96bd461d46ba0c662901 Author: Mathias Buder <mathias.buder@gmail.com> Date: Thu Dec 1 12:19:23 2022 +0100 [ME007] Improved snesor measuremnt function commit fe42ebd1124e2246e4d7afd63c905c251e084b27 Author: Mathias Buder <mathias.buder@gmail.com> Date: Thu Dec 1 00:43:13 2022 +0100 [ME007] Updated state maschine to trigger and receive sensor measurements commit d137e6dec5104b4716428849d99c68bbf407ab42 Author: Mathias Buder <mathias.buder@gmail.com> Date: Wed Nov 30 20:35:31 2022 +0100 [ME007] Added initial state maschine to trigger and receive sensor measurements commit fc3da7b36849df162d9d5496a763ab2beb096aff Author: Mathias Buder <mathias.buder@gmail.com> Date: Tue Nov 29 21:28:28 2022 +0100 [ME007] Updated pin name commit e9fa9fb771cf15dcd9ed8b63b9194154543ef10e Author: Mathias Buder <mathias.buder@gmail.com> Date: Mon Nov 28 22:02:34 2022 +0100 [ME007] Fixed issue that sensor GPIOs not shown in drop-down list commit a13e42660183eb4ab91007ca0ea6bf1544687556 Author: Mathias Buder <mathias.buder@gmail.com> Date: Mon Nov 28 15:06:34 2022 +0100 [ME007] Added sensor into supported feature list commit dec17b59ce2905124386f8c90d81656bf104c844 Author: Mathias Buder <mathias.buder@gmail.com> Date: Mon Nov 28 15:01:58 2022 +0100 [ME007] Removed log message in Xsns23() commit 11f479d2ec9d3f4e7552c2f78cdc83914c5b8b94 Author: Mathias Buder <mathias.buder@gmail.com> Date: Mon Nov 28 10:47:55 2022 +0100 [ME007] Added GPIOs to tasmota_template_legacy.h and berry commit 23aec8e5ff4e9fb8ef7d3b01a707641accc1e01e Author: Mathias Buder <mathias.buder@gmail.com> Date: Sun Nov 27 20:10:53 2022 +0100 [ME007] Initial ME007 driver API setup * [ME007] Reverted change in .gitignore and platform.ini * [ME007] Removed dependency to stdlib.h * [ME007] Adjusted unit to cm * [ME007] Reverted change in tasmota_template_legacy.h * [ME007] Changed sensor message tag to three characters * [ME007] Disabled sensor in my_user_config.h * [ME007] Added driver code size into commente Co-authored-by: Mathias Buder <mathias_buder@bose.com>
2022-12-14 10:52:26 +00:00
#define D_SENSOR_ME007_TRIG "ME007 Tri"
#define D_SENSOR_ME007_RX "ME007 Rx"
WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver (#17626) * WIP Tuya MCU Bridge driver alternative to the TuyaMCU driver The main difference is this driver does not try and wire MCU data points (Dps) into the tasmota power/light/etc controls. Instead each Dp ends up being relayed directly to MQTT and the rules subsystem. If you want to change the state of something wired up to the MCU, you send tuyamcu specific commands to manipulate the Dp. Each Dp gets a type and id specific topic that is sent to MQTT. eg, Dp id 1 type bool looks like tele/%topic%/TUYAMCUBOOL1. To change state you send a TuyaMCUBool1 command (ie, the command index value is used as the DpId, which is nice and symmetrical) with the new value. Currently Rules operate on TuyaMCU#TypeDpid things, eg, "rule1 on TuyaMCU#Bool1 do power %value% endon" toggle the power on the tasmota device when the state of the thing on the MCU changes too. The most obviously missing stuff at the moment is: - better relaying of the wifi/mqtt status to the MCU - handling wifi reset requests from the MCU - low power stuff? - support for sending status updates and device info queries. - restarting the tuya mcu state machine? - restarting the rx state machine when no bytes are rxed for a period of time - time sync * shorten the log prefix to TYB (3 chars). requested by arendst * use the local definition for the SET_DP command. reaching back to the existing tuyamcu code isnt reliable. pointed out by arendst * put the todo list in the code so it can be tracked * check the wifi/mqtt state every second and update the mcu if it changes. * fix rule processing when Dp state is changed from a cmnd. rule processing was done as part of publishing the state, but publishing the state when it was updated by a command only happened if So59 was set. split rule processing out of publish and call them separately as needed. publish is now called from teleperiod, status updates from the MCU, and from cmnds if so59 is set. rules are called from status updates from the MCU and from cmnds. Co-authored-by: David Gwynne <dlg@defeat.lan.animata.net>
2023-01-08 16:35:45 +00:00
#define D_SENSOR_TUYAMCUBR_TX "TuyaMCUBr Tx"
#define D_SENSOR_TUYAMCUBR_RX "TuyaMCUBr Rx"
#define D_SENSOR_BIOPDU_PZEM0XX_TX "BioPDU PZEM0XX Tx"
#define D_SENSOR_BIOPDU_PZEM016_RX "BioPDU PZEM016 Rx"
#define D_SENSOR_BIOPDU_BIT "BioPDU Bit"
#define D_SENSOR_BIOPDU_PZEM0XX_TX "BioPDU PZEM0XX Tx"
#define D_SENSOR_BIOPDU_PZEM016_RX "BioPDU PZEM016 Rx"
#define D_SENSOR_BIOPDU_BIT "BioPDU Bit"
#define D_SENSOR_LOX_O2_RX "LoxO2 RX"
#define D_GPIO_MAGIC_SWITCH "MagicSwitch"
// Units
#define D_UNIT_AMPERE "A"
#define D_UNIT_CELSIUS "C"
#define D_UNIT_CENTIMETER "cm"
#define D_UNIT_DEGREE "°"
#define D_UNIT_FAHRENHEIT "F"
2022-05-05 15:26:29 +01:00
#define D_UNIT_FPS "FPS"
#define D_UNIT_HERTZ "Hz"
#define D_UNIT_HOUR "h"
#define D_UNIT_GALLONS "gal"
#define D_UNIT_GALLONS_PER_MIN "g/m"
#define D_UNIT_GRAM_PER_CUBIC_METER "g/m³"
2022-04-19 13:01:18 +01:00
#define D_UNIT_INCH_MERCURY "inHg"
2021-02-25 14:29:27 +00:00
#define D_UNIT_INCREMENTS "növ."
#define D_UNIT_KELVIN "K"
2020-04-11 00:48:37 +01:00
#define D_UNIT_KILOMETER "km"
#define D_UNIT_KILOGRAM "kg"
#define D_UNIT_KILOMETER_PER_HOUR "km/h" // or "km/h"
#define D_UNIT_KILOOHM "kΩ"
#define D_UNIT_KILOWATTHOUR "kWh"
#define D_UNIT_LITERS "L"
#define D_UNIT_LITERS_PER_MIN "L/m"
#define D_UNIT_LUX "lx"
#define D_UNIT_MICROGRAM_PER_CUBIC_METER "µg/m³"
#define D_UNIT_MICROMETER "µm"
#define D_UNIT_MICROSECOND "µs"
#define D_UNIT_MICROSIEMENS_PER_CM "µS/cm"
2022-10-02 22:44:40 +01:00
#define D_UNIT_MICROTESLA "µT"
#define D_UNIT_MILLIAMPERE "mA"
#define D_UNIT_MILLILITERS "ml"
#define D_UNIT_MILLIMETER "mm"
#define D_UNIT_MILLIMETER_MERCURY "mmHg"
#define D_UNIT_MILLISECOND "ms"
#define D_UNIT_MILLIVOLT "mV"
#define D_UNIT_MINUTE "min"
#define D_UNIT_PARTS_PER_BILLION "ppb"
#define D_UNIT_PARTS_PER_DECILITER "ppd"
#define D_UNIT_PARTS_PER_MILLION "ppm"
#define D_UNIT_MILIGRAMS_PER_LITER "mg/L"
#define D_UNIT_PERCENT "%%"
#define D_UNIT_PRESSURE "hPa"
#define D_UNIT_SECOND "s"
#define D_UNIT_SECTORS "szektorok"
#define D_UNIT_VA "VA"
#define D_UNIT_VAR "VAr"
#define D_UNIT_VOLT "V"
#define D_UNIT_WATT "W"
#define D_UNIT_WATTHOUR "Wh"
#define D_UNIT_WATT_METER_QUADRAT "W/m²"
2022-04-22 07:40:29 +01:00
#define D_UNIT_LITER_PER_MINUTE "l/min"
#define D_UNIT_CUBICMETER_PER_HOUR "m³/h"
#define D_UNIT_CUBIC_METER "m³"
2021-03-23 14:17:32 +00:00
#define D_NEW_ADDRESS "Setting address to"
#define D_OUT_OF_RANGE "Out of Range"
#define D_SENSOR_DETECTED "detected"
//SDM220, SDM120, SDM72, LE01MR, SDM230
2021-02-09 15:13:40 +00:00
#define D_EXPORT_POWER "Export Power"
#define D_IMPORT_POWER "Import Power"
#define D_PHASE_ANGLE "Fázisszög"
#define D_IMPORT_ACTIVE "Bejövő aktív"
#define D_EXPORT_ACTIVE "Kimenő aktív"
#define D_IMPORT_REACTIVE "Bejövő reaktív"
#define D_EXPORT_REACTIVE "Kimenő reaktív"
#define D_TOTAL_REACTIVE "Összes reaktív"
#define D_UNIT_KWARH "kVArh"
#define D_UNIT_ANGLE "fok"
2021-02-25 14:29:27 +00:00
#define D_TOTAL_ACTIVE "Összes aktív"
#define D_RESETTABLE_TOTAL_ACTIVE "Összes aktív (RST)"
//SOLAXX1
2021-02-25 14:29:27 +00:00
#define D_PV1_VOLTAGE "PV1 feszültség"
#define D_PV1_CURRENT "PV1 áramerősség"
#define D_PV1_POWER "PV1 teljesítmény"
#define D_PV2_VOLTAGE "PV2 feszültség"
#define D_PV2_CURRENT "PV2 áramerősség"
#define D_PV2_POWER "PV2 teljesítmény"
#define D_SOLAR_POWER "Solar teljesítmény"
#define D_INVERTER_POWER "Inverter teljesítmény"
#define D_STATUS "Állapot"
#define D_SOLAX_MODE_0 "Várakozás"
#define D_SOLAX_MODE_1 "Ellenőrzés"
#define D_SOLAX_MODE_2 "Folyamatban"
#define D_SOLAX_MODE_3 "Hiba"
#define D_SOLAX_MODE_4 "Permanent Failure" // to be translated
#define D_SOLAX_MODE_5 "Software Update" // to be translated
#define D_SOLAX_MODE_6 "Selftest" // to be translated
2021-02-25 14:29:27 +00:00
#define D_SOLAX_ERROR_0 "Nincs hibakód"
#define D_SOLAX_ERROR_1 "Hálózat elvesztése hiba"
#define D_SOLAX_ERROR_2 "Hálózat feszültség hiba"
#define D_SOLAX_ERROR_3 "Hálózat frekvencia hiba"
#define D_SOLAX_ERROR_4 "Pv feszültség hiba"
#define D_SOLAX_ERROR_5 "Elválasztási hiba"
#define D_SOLAX_ERROR_6 "Túlmelegedés hiba"
#define D_SOLAX_ERROR_7 "Ventillátor hiba"
#define D_SOLAX_ERROR_8 "Egyéb eszközhiba"
//xdrv_10_scripter.ino
2021-02-25 14:29:27 +00:00
#define D_CONFIGURE_SCRIPT "Script szerkesztése"
#define D_SCRIPT "script szerkesztése"
#define D_SDCARD_UPLOAD "fájl feltöltés"
#define D_UFSDIR "ufs mappa"
#define D_UPL_DONE "Kész"
#define D_SCRIPT_CHARS_LEFT "karakter még"
#define D_SCRIPT_CHARS_NO_MORE "nincs több karakter"
#define D_SCRIPT_DOWNLOAD "Letöltés"
#define D_SCRIPT_ENABLE "script engedélyezés"
#define D_SCRIPT_UPLOAD "Feltöltés"
#define D_SCRIPT_UPLOAD_FILES "Fájlok feltöltése"
2021-01-06 16:54:03 +00:00
//xdrv_50_filesystem.ino
2021-02-25 14:29:27 +00:00
#define D_MANAGE_FILE_SYSTEM "Fájlrendszer kezelése"
#define D_FS_SIZE "Méret"
#define D_FS_FREE "Szabad"
2021-04-11 14:22:57 +01:00
#define D_NEW_FILE "newfile.txt"
#define D_CREATE_NEW_FILE "Create and edit new file"
#define D_EDIT_FILE "Edit File"
2021-06-17 18:02:58 +01:00
#define D_CONFIRM_FILE_DEL "Confirm file deletion"
#define D_SHOW_HIDDEN_FILES "Show hidden files"
2021-01-06 16:54:03 +00:00
2020-04-25 23:43:50 +01:00
//xsns_67_as3935.ino
2021-02-25 14:29:27 +00:00
#define D_AS3935_GAIN "nyereség:"
#define D_AS3935_ENERGY "enegia:"
#define D_AS3935_DISTANCE "távolság:"
#define D_AS3935_DISTURBER "zavaró:"
2020-04-25 23:43:50 +01:00
#define D_AS3935_VRMS "µVrms:"
2021-02-25 14:29:27 +00:00
#define D_AS3935_APRX "kb.:"
#define D_AS3935_AWAY "távol"
#define D_AS3935_LIGHT "villám"
#define D_AS3935_OUT "villám hatókörön kívül"
#define D_AS3935_NOT "távolság nem meghatározható"
#define D_AS3935_ABOVE "villám felül"
#define D_AS3935_NOISE "zaj érzékelve"
#define D_AS3935_DISTDET "zavarás érzékelve"
#define D_AS3935_INTNOEV "Megszakítás esemény nélkül!"
#define D_AS3935_FLICKER "IRQ zörgés!"
#define D_AS3935_POWEROFF "Kikapcsolva"
#define D_AS3935_NOMESS "hallgatózás..."
#define D_AS3935_ON "Be"
#define D_AS3935_OFF "Ki"
#define D_AS3935_INDOORS "Beltér"
#define D_AS3935_OUTDOORS "Kültér"
#define D_AS3935_CAL_FAIL "kalibráció nem sikerült"
#define D_AS3935_CAL_OK "kalibráció beállítva:"
2020-04-25 23:43:50 +01:00
2020-05-07 09:54:29 +01:00
//xsns_68_opentherm.ino
#define D_SENSOR_BOILER_OT_RX "OpenTherm RX"
#define D_SENSOR_BOILER_OT_TX "OpenTherm TX"
2020-08-10 16:42:31 +01:00
// xnrg_15_teleinfo Denky (Teleinfo)
2021-02-25 14:29:27 +00:00
#define D_CONTRACT "Szerződés"
#define D_POWER_LOAD "Teljesítény"
#define D_CURRENT_TARIFF "Áramerősség díja"
#define D_TARIFF "Díj"
#define D_OVERLOAD "Túlterhelés"
#define D_MAX_POWER "Max teljesítmény"
#define D_MAX_CURRENT "Max áramerősség"
2020-08-10 16:42:31 +01:00
// xsns_79_as608.ino
2021-02-25 14:29:27 +00:00
#define D_FP_ENROLL_PLACEFINGER "Helyezze oda az ujját"
#define D_FP_ENROLL_REMOVEFINGER "Vegye el az ujját"
#define D_FP_ENROLL_PLACESAMEFINGER "Ugyanazt az ujját tegye oda ismét"
#define D_FP_ENROLL_RETRY "Hiba, próbálkozzon újra"
#define D_FP_ENROLL_RESTART "Újrindítás"
#define D_FP_ENROLL_ERROR "Hiba"
#define D_FP_ENROLL_RESET "Reset"
2021-02-25 14:29:27 +00:00
#define D_FP_ENROLL_ACTIVE "Aktív"
#define D_FP_ENROLL_INACTIVE "Inaktív"
// Indexed by Adafruit_Fingerprint.h defines
2021-02-25 14:29:27 +00:00
#define D_FP_PACKETRECIEVEERR "Komm. hiba" // 0x01 Error when receiving data package
#define D_FP_NOFINGER "" // 0x02 No finger on the sensor
2021-02-25 14:29:27 +00:00
#define D_FP_IMAGEFAIL "Kép hiba" // 0x03 Failed to enroll the finger
#define D_FP_IMAGEMESS "Túl zajos kép" // 0x06 Failed to generate character file due to overly disorderly fingerprint image
#define D_FP_FEATUREFAIL "Ujjlenyomat túl kicsi" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image
#define D_FP_NOMATCH "Nincs találat" // 0x08 Finger doesn't match
#define D_FP_NOTFOUND "Nincs találat" // 0x09 Failed to find matching finger
#define D_FP_ENROLLMISMATCH "Nincs találat" // 0x0A Failed to combine the character files
#define D_FP_BADLOCATION "Helytelen pozíció" // 0x0B Addressed PageID is beyond the finger library
#define D_FP_DBRANGEFAIL "DB tartomány hiba" // 0x0C Error when reading template from library or invalid template
#define D_FP_UPLOADFEATUREFAIL "Feltöltési hiba" // 0x0D Error when uploading template
#define D_FP_PACKETRESPONSEFAIL "Válaszcsomag hiba" // 0x0E Module failed to receive the following data packages
#define D_FP_UPLOADFAIL "Feltöltési hiba" // 0x0F Error when uploading image
#define D_FP_DELETEFAIL "Törlési hiba" // 0x10 Failed to delete the template
#define D_FP_DBCLEARFAIL "Könyvtár törlési hiba" // 0x11 Failed to clear finger library
#define D_FP_PASSFAIL "Jelszó hiba" // 0x13 Find whether the fingerprint passed or failed
#define D_FP_INVALIDIMAGE "Érvénytelen kép" // 0x15 Failed to generate image because of lac of valid primary image
#define D_FP_FLASHERR "Flash írási hiba" // 0x18 Error when writing flash
#define D_FP_INVALIDREG "Érvénytelen szám" // 0x1A Invalid register number
#define D_FP_ADDRCODE "Cím kód" // 0x20 Address code
#define D_FP_PASSVERIFY "Jelszó ellenőrizve" // 0x21 Verify the fingerprint passed
#define D_FP_UNKNOWNERROR "Hiba" // Any other error
2022-04-27 15:49:16 +01:00
// xsns_96_flowratemeter.ino
#define D_FLOWRATEMETER_NAME "Flowrate"
#define D_FLOWRATEMETER_AMOUNT_TODAY "Amount Today"
#define D_FLOWRATEMETER_DURATION_TODAY "Duration Today"
2022-04-22 07:40:29 +01:00
2021-01-20 13:30:31 +00:00
// xsns_83_neopool.ino
#define D_NEOPOOL_MACH_NONE "NeoPool" // Machine names
#define D_NEOPOOL_MACH_HIDROLIFE "Hidrolife"
#define D_NEOPOOL_MACH_AQUASCENIC "Aquascenic"
#define D_NEOPOOL_MACH_OXILIFE "Oxilife"
#define D_NEOPOOL_MACH_BIONET "Bionet"
#define D_NEOPOOL_MACH_HIDRONISER "Hidroniser"
#define D_NEOPOOL_MACH_UVSCENIC "UVScenic"
#define D_NEOPOOL_MACH_STATION "Station"
2021-01-20 13:30:31 +00:00
#define D_NEOPOOL_MACH_BRILIX "Brilix"
#define D_NEOPOOL_MACH_GENERIC "Generic"
#define D_NEOPOOL_MACH_BAYROL "Bayrol"
#define D_NEOPOOL_MACH_HAY "Hay"
#define D_NEOPOOL_FILTRATION_MANUAL "Manual" // Filtration modes
#define D_NEOPOOL_FILTRATION_AUTO "Auto"
#define D_NEOPOOL_FILTRATION_HEATING "Heating"
#define D_NEOPOOL_FILTRATION_SMART "Smart"
#define D_NEOPOOL_FILTRATION_INTELLIGENT "Intelligent"
#define D_NEOPOOL_FILTRATION_BACKWASH "Backwash"
#define D_NEOPOOL_FILTRATION_NONE "" // Filtration speed level
#define D_NEOPOOL_FILTRATION_SLOW "slow"
#define D_NEOPOOL_FILTRATION_MEDIUM "medium"
#define D_NEOPOOL_FILTRATION_FAST "fast"
2021-02-25 14:29:27 +00:00
#define D_NEOPOOL_TYPE "Típus" // Sensor & relais names
2021-01-20 13:30:31 +00:00
#define D_NEOPOOL_REDOX "Redox"
#define D_NEOPOOL_CHLORINE "Chlorine"
#define D_NEOPOOL_CONDUCTIVITY "Conductivity"
#define D_NEOPOOL_IONIZATION "Ionization"
#define D_NEOPOOL_HYDROLYSIS "Hydrolysis"
#define D_NEOPOOL_RELAY "Relay"
2022-04-07 16:00:21 +01:00
#define D_NEOPOOL_RELAY_FILTRATION "Filtration" // Relay assignment
2021-01-20 13:30:31 +00:00
#define D_NEOPOOL_RELAY_LIGHT "Light"
#define D_NEOPOOL_RELAY_PH_ACID "Acid pump"
#define D_NEOPOOL_RELAY_PH_BASE "Base pump"
#define D_NEOPOOL_RELAY_RX "Redox level"
#define D_NEOPOOL_RELAY_CL "Chlorine pump"
2022-04-07 16:00:21 +01:00
#define D_NEOPOOL_RELAY_CD "Conductivity"
#define D_NEOPOOL_RELAY_HEATING "Heating"
#define D_NEOPOOL_RELAY_UV "UV"
#define D_NEOPOOL_RELAY_VALVE "Valve"
#define D_NEOPOOL_RELAY_AUX "Aux"
2021-02-25 14:29:27 +00:00
#define D_NEOPOOL_TIME "Idő"
2022-03-10 11:16:37 +00:00
#define D_NEOPOOL_FILT_MODE "Filtration mode"
2021-10-11 16:03:28 +01:00
#define D_NEOPOOL_CELL_RUNTIME "Cell runtime"
2021-01-20 13:30:31 +00:00
#define D_NEOPOOL_POLARIZATION "Pol" // Sensor status
#define D_NEOPOOL_PR_OFF "PrOff"
#define D_NEOPOOL_SETPOINT_OK "Ok"
#define D_NEOPOOL_COVER "Cover"
#define D_NEOPOOL_SHOCK "Boost"
#define D_NEOPOOL_STATUS_ON "ON"
#define D_NEOPOOL_STATUS_OFF "OFF"
#define D_NEOPOOL_STATUS_WAIT "WAIT"
#define D_NEOPOOL_STATUS_TANK "TANK"
#define D_NEOPOOL_STATUS_FLOW "Flow"
2021-01-20 13:30:31 +00:00
#define D_NEOPOOL_LOW "Low"
#define D_NEOPOOL_FLOW1 "FL1"
#define D_NEOPOOL_FLOW2 "FL2"
#define D_NEOPOOL_PH_HIGH "too high" // ph Alarms
#define D_NEOPOOL_PH_LOW "too low"
#define D_NEOPOOL_PUMP_TIME_EXCEEDED "pump time exceeded"
// xsns_106_gdk101.ino
#define D_AVG_RAD_DOSE "átlagos sugárdózis"
2023-04-21 15:55:09 +01:00
#define D_UNIT_US_H "µSv/h"
// ixrv92_pipsolar.ino
#define D_SENSOR_PIPSOLAR_TX "Pipsolar TX"
#define D_SENSOR_PIPSOLAR_RX "Pipsolar RX"
#endif // _LANGUAGE_HU_HU_H_