Tasmota/sonoff/sonoff_template.h

/*
  sonoff_template.h - template settings for Sonoff-Tasmota

  Copyright (C) 2018  Theo Arends

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifndef _SONOFF_TEMPLATE_H_
#define _SONOFF_TEMPLATE_H_

// User selectable GPIO functionality
enum UserSelectablePins {
  GPIO_NONE,           // Not used
  GPIO_DHT11,          // DHT11
  GPIO_DHT22,          // DHT21, DHT22, AM2301, AM2302, AM2321
  GPIO_SI7021,         // iTead SI7021
  GPIO_DSB,            // Single wire DS18B20 or DS18S20
  GPIO_I2C_SCL,        // I2C SCL
  GPIO_I2C_SDA,        // I2C SDA
  GPIO_WS2812,         // WS2812 Led string
  GPIO_IRSEND,         // IR remote
  GPIO_SWT1,           // User connected external switches
  GPIO_SWT2,
  GPIO_SWT3,
  GPIO_SWT4,
  GPIO_KEY1,           // Button usually connected to GPIO0
  GPIO_KEY2,
  GPIO_KEY3,
  GPIO_KEY4,
  GPIO_REL1,           // Relays
  GPIO_REL2,
  GPIO_REL3,
  GPIO_REL4,
  GPIO_REL5,
  GPIO_REL6,
  GPIO_REL7,
  GPIO_REL8,
  GPIO_REL1_INV,
  GPIO_REL2_INV,
  GPIO_REL3_INV,
  GPIO_REL4_INV,
  GPIO_REL5_INV,
  GPIO_REL6_INV,
  GPIO_REL7_INV,
  GPIO_REL8_INV,
  GPIO_PWM1,           // RGB   Red   or C  Cold White
  GPIO_PWM2,           // RGB   Green or CW Warm White
  GPIO_PWM3,           // RGB   Blue
  GPIO_PWM4,           // RGBW  (Cold) White
  GPIO_PWM5,           // RGBCW Warm White
  GPIO_CNTR1,
  GPIO_CNTR2,
  GPIO_CNTR3,
  GPIO_CNTR4,
  GPIO_PWM1_INV,       // RGB   Red   or C  Cold White
  GPIO_PWM2_INV,       // RGB   Green or CW Warm White
  GPIO_PWM3_INV,       // RGB   Blue
  GPIO_PWM4_INV,       // RGBW  (Cold) White
  GPIO_PWM5_INV,       // RGBCW Warm White
  GPIO_IRRECV,         // IR receiver
  GPIO_LED1,           // Leds
  GPIO_LED2,
  GPIO_LED3,
  GPIO_LED4,
  GPIO_LED1_INV,
  GPIO_LED2_INV,
  GPIO_LED3_INV,
  GPIO_LED4_INV,
  GPIO_MHZ_TXD,        // MH-Z19 Serial interface
  GPIO_MHZ_RXD,        // MH-Z19 Serial interface
  GPIO_PZEM_TX,        // PZEM004T Serial interface
  GPIO_PZEM_RX,        // PZEM004T Serial interface
  GPIO_SAIR_TX,        // SenseAir Serial interface
  GPIO_SAIR_RX,        // SenseAir Serial interface
  GPIO_SPI_CS,         // SPI Chip Select
  GPIO_SPI_DC,         // SPI Data Direction
  GPIO_BACKLIGHT,      // Display backlight control
  GPIO_PMS5003,        // Plantower PMS5003 Serial interface
  GPIO_SDS0X1,         // Nova Fitness SDS011 Serial interface
  GPIO_SBR_TX,         // Serial Bridge Serial interface
  GPIO_SBR_RX,         // Serial Bridge Serial interface
  GPIO_SENSOR_END };

// Programmer selectable GPIO functionality offset by user selectable GPIOs
enum ProgramSelectablePins {
  GPIO_RXD = GPIO_SENSOR_END,  // Serial interface
  GPIO_TXD,            // Serial interface
  GPIO_SPI_MISO,       // SPI MISO library fixed pin GPIO12
  GPIO_SPI_MOSI,       // SPI MOSI library fixed pin GPIO13
  GPIO_SPI_CLK,        // SPI Clk library fixed pin GPIO14
  GPIO_HLW_SEL,        // HLW8012 Sel output (Sonoff Pow)
  GPIO_HLW_CF1,        // HLW8012 CF1 voltage / current (Sonoff Pow)
  GPIO_HLW_CF,         // HLW8012 CF power (Sonoff Pow)
  GPIO_ADC0,           // ADC
  GPIO_DI,             // my92x1 PWM input
  GPIO_DCKI,           // my92x1 CLK input
  GPIO_ARIRFRCV,       // AliLux RF Receive input
  GPIO_USER,           // User configurable
  GPIO_MAX };

// Text in webpage Module Parameters and commands GPIOS and GPIO
const char kSensorNames[] PROGMEM =
  D_SENSOR_NONE "|"
  D_SENSOR_DHT11 "|" D_SENSOR_AM2301 "|" D_SENSOR_SI7021 "|"
  D_SENSOR_DS18X20 "|"
  D_SENSOR_I2C_SCL "|" D_SENSOR_I2C_SDA "|"
  D_SENSOR_WS2812 "|"
  D_SENSOR_IRSEND "|"
  D_SENSOR_SWITCH "1|" D_SENSOR_SWITCH "2|" D_SENSOR_SWITCH "3|" D_SENSOR_SWITCH "4|"
  D_SENSOR_BUTTON "1|" D_SENSOR_BUTTON "2|" D_SENSOR_BUTTON "3|" D_SENSOR_BUTTON "4|"
  D_SENSOR_RELAY "1|" D_SENSOR_RELAY "2|" D_SENSOR_RELAY "3|" D_SENSOR_RELAY "4|" D_SENSOR_RELAY "5|" D_SENSOR_RELAY "6|" D_SENSOR_RELAY "7|" D_SENSOR_RELAY "8|"
  D_SENSOR_RELAY "1i|" D_SENSOR_RELAY "2i|" D_SENSOR_RELAY "3i|" D_SENSOR_RELAY "4i|" D_SENSOR_RELAY "5i|" D_SENSOR_RELAY "6i|" D_SENSOR_RELAY "7i|" D_SENSOR_RELAY "8i|"
  D_SENSOR_PWM "1|" D_SENSOR_PWM "2|" D_SENSOR_PWM "3|" D_SENSOR_PWM "4|" D_SENSOR_PWM "5|"
  D_SENSOR_COUNTER "1|" D_SENSOR_COUNTER "2|" D_SENSOR_COUNTER "3|" D_SENSOR_COUNTER "4|"
  D_SENSOR_PWM "1i|" D_SENSOR_PWM "2i|" D_SENSOR_PWM "3i|" D_SENSOR_PWM "4i|" D_SENSOR_PWM "5i|"
  D_SENSOR_IRRECV "|"
  D_SENSOR_LED "1|" D_SENSOR_LED "2|" D_SENSOR_LED "3|" D_SENSOR_LED "4|"
  D_SENSOR_LED "1i|" D_SENSOR_LED "2i|" D_SENSOR_LED "3i|" D_SENSOR_LED "4i|"
  D_SENSOR_MHZ_TX "|" D_SENSOR_MHZ_RX "|"
  D_SENSOR_PZEM_TX "|" D_SENSOR_PZEM_RX "|"
  D_SENSOR_SAIR_TX "|" D_SENSOR_SAIR_RX "|"
  D_SENSOR_SPI_CS "|" D_SENSOR_SPI_DC "|" D_SENSOR_BACKLIGHT "|"
  D_SENSOR_PMS5003 "|" D_SENSOR_SDS0X1 "|"
  D_SENSOR_SBR_TX "|" D_SENSOR_SBR_RX;

/********************************************************************************************/

// Supported hardware modules
enum SupportedModules {
  SONOFF_BASIC,
  SONOFF_RF,
  SONOFF_SV,
  SONOFF_TH,
  SONOFF_DUAL,
  SONOFF_POW,
  SONOFF_4CH,
  S20,
  SLAMPHER,
  SONOFF_TOUCH,
  SONOFF_LED,
  CH1,
  CH4,
  MOTOR,
  ELECTRODRAGON,
  EXS_RELAY,
  WION,
  WEMOS,
  SONOFF_DEV,
  H801,
  SONOFF_SC,
  SONOFF_BN,
  SONOFF_4CHPRO,
  HUAFAN_SS,
  SONOFF_BRIDGE,
  SONOFF_B1,
  AILIGHT,
  SONOFF_T11,
  SONOFF_T12,
  SONOFF_T13,
  SUPLA1,
  WITTY,
  YUNSHAN,
  MAGICHOME,
  LUANIHVIO,
  KMC_70011,
  ARILUX_LC01,
  ARILUX_LC11,
  SONOFF_DUAL_R2,
  ARILUX_LC06,
  SONOFF_S31,
  ZENGGE_ZF_WF017,
  MAXMODULE };

/********************************************************************************************/

#define MAX_GPIO_PIN       18   // Number of supported GPIO

const char PINS_WEMOS[] PROGMEM = "D3TXD4RXD2D1flashcontrolD6D7D5D8D0A0";

typedef struct MYIO {
  uint8_t      io[MAX_GPIO_PIN];
} myio;

typedef struct MYTMPLT {
  char         name[15];
  myio         gp;
} mytmplt;

const uint8_t kNiceList[MAXMODULE] PROGMEM = {
  SONOFF_BASIC,
  SONOFF_RF,
  SONOFF_TH,
  SONOFF_DUAL,
  SONOFF_DUAL_R2,
  SONOFF_POW,
  SONOFF_S31,
  SONOFF_4CH,
  SONOFF_4CHPRO,
  SONOFF_SV,
  SONOFF_DEV,
  S20,
  SLAMPHER,
  SONOFF_TOUCH,
  SONOFF_T11,
  SONOFF_T12,
  SONOFF_T13,
  SONOFF_SC,
  SONOFF_B1,
  SONOFF_LED,
  SONOFF_BN,
  SONOFF_BRIDGE,
  CH1,
  CH4,
  MOTOR,
  ELECTRODRAGON,
  EXS_RELAY,
  SUPLA1,
  LUANIHVIO,
  YUNSHAN,
  WION,
  H801,
  MAGICHOME,
  ARILUX_LC01,
  ARILUX_LC06,
  ARILUX_LC11,
  ZENGGE_ZF_WF017,
  HUAFAN_SS,
  KMC_70011,
  AILIGHT,
  WEMOS,
  WITTY
};

// Default module settings
const mytmplt kModules[MAXMODULE] PROGMEM = {
  { "Sonoff Basic",    // Sonoff Basic (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,                // GPIO02
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 Optional sensor
     0,                // GPIO05
     0,                // GPIO06 (SD_CLK   Flash)
     0,                // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
     0,                // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
     0,                // GPIO09 (SD_DATA2 Flash QIO)
     0,                // GPIO10 (SD_DATA3 Flash QIO)
     0,                // GPIO11 (SD_CMD   Flash)
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     GPIO_USER,        // GPIO14 Optional sensor
     0,                // GPIO15
     0,                // GPIO16
     0                 // ADC0 Analog input
  },
  { "Sonoff RF",       // Sonoff RF (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 Optional sensor
     0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     GPIO_USER,        // GPIO14 Optional sensor
     0, 0, 0
  },
  { "Sonoff SV",       // Sonoff SV (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 Optional sensor
     GPIO_USER,        // GPIO05 Optional sensor
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     GPIO_USER,        // GPIO14 Optional sensor
     0, 0,
     GPIO_ADC0         // ADC0 Analog input
  },
  { "Sonoff TH",       // Sonoff TH10/16 (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 Optional sensor
     0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     GPIO_USER,        // GPIO14 Optional sensor
     0, 0, 0
  },
  { "Sonoff Dual",     // Sonoff Dual (ESP8266)
     0,
     GPIO_TXD,         // GPIO01 Relay control
     0,
     GPIO_RXD,         // GPIO03 Relay control
     GPIO_USER,        // GPIO04 Optional sensor
     0,
     0, 0, 0, 0, 0, 0, // Flash connection
     0,
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     GPIO_USER,        // GPIO14 Optional sensor
     0, 0, 0
  },
  { "Sonoff Pow",      // Sonoff Pow (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     0, 0, 0, 0,
     GPIO_HLW_SEL,     // GPIO05 HLW8012 Sel output
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_HLW_CF1,     // GPIO13 HLW8012 CF1 voltage / current
     GPIO_HLW_CF,      // GPIO14 HLW8012 CF power
     GPIO_LED1,        // GPIO15 Green Led (0 = On, 1 = Off)
     0, 0
  },
  { "Sonoff 4CH",      // Sonoff 4CH (ESP8285)
     GPIO_KEY1,        // GPIO00 Button 1
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_USER,        // GPIO02 Optional sensor
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_REL3,        // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On)
     GPIO_REL2,        // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On)
     0, 0, 0,          // Flash connection
     GPIO_KEY2,        // GPIO09 Button 2
     GPIO_KEY3,        // GPIO10 Button 3
     0,                // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     GPIO_KEY4,        // GPIO14 Button 4
     GPIO_REL4,        // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On)
     0, 0
  },
  { "S20 Socket",      // S20 Smart Socket (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     0, 0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Slampher",        // Slampher (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     0, 0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Sonoff Touch",    // Sonoff Touch (ESP8285)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     0, 0,
     0, 0, 0,          // Flash connection
     0, 0,
     0,                // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Sonoff LED",      // Sonoff LED (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     0, 0, 0,
     GPIO_USER,        // GPIO04 Optional sensor (PWM3 Green)
     GPIO_USER,        // GPIO05 Optional sensor (PWM2 Red)
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_PWM1,        // GPIO12 Cold light (PWM0 Cold)
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     GPIO_PWM2,        // GPIO14 Warm light (PWM1 Warm)
     GPIO_USER,        // GPIO15 Optional sensor (PWM4 Blue)
     0, 0
  },
  { "1 Channel",       // 1 Channel Inching/Latching Relay using (PSA-B01 - ESP8266 and PSF-B01 - ESP8285)
     GPIO_KEY1,        // GPIO00 Button
     0, 0, 0, 0, 0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "4 Channel",       // 4 Channel Inching/Latching Relays (ESP8266)
     0,
     GPIO_TXD,         // GPIO01 Relay control
     0,
     GPIO_RXD,         // GPIO03 Relay control
     0, 0,
     0, 0, 0, 0, 0, 0, // Flash connection
     0,
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Motor C/AC",      // Motor Clockwise / Anti clockwise (PSA-B01 - ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     0, 0, 0, 0, 0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "ElectroDragon",   // ElectroDragon IoT Relay Board (ESP8266)
     GPIO_KEY2,        // GPIO00 Button 2
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_KEY1,        // GPIO02 Button 1
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 Optional sensor
     GPIO_USER,        // GPIO05 Optional sensor
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL2,        // GPIO12 Red Led and Relay 2 (0 = Off, 1 = On)
     GPIO_REL1,        // GPIO13 Red Led and Relay 1 (0 = Off, 1 = On)
     GPIO_USER,        // GPIO14 Optional sensor
     GPIO_USER,        // GPIO15 Optional sensor
     GPIO_LED1,        // GPIO16 Green/Blue Led (1 = On, 0 = Off)
     GPIO_ADC0         // ADC0   A0 Analog input
  },
  { "EXS Relay",       // Latching relay https://ex-store.de/ESP8266-WiFi-Relay-V31 (ESP8266)
                       //   Module Pin 1 VCC 3V3, Module Pin 6 GND
     GPIO_KEY1,        // GPIO00 Module Pin 8 - Button (firmware flash)
     GPIO_USER,        // GPIO01 Module Pin 2 = UART0_TXD
     GPIO_USER,        // GPIO02 Module Pin 7
     GPIO_USER,        // GPIO03 Module Pin 3 = UART0_RXD
     GPIO_USER,        // GPIO04 Module Pin 10
     GPIO_USER,        // GPIO05 Module Pin 9
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Relay1 ( 1 = Off)
     GPIO_REL2,        // GPIO13 Relay1 ( 1 = On)
     GPIO_USER,        // GPIO14 Module Pin 5
     0,
     GPIO_USER,        // GPIO16 Module Pin 4
     0
  },
  { "WiOn",            // Indoor Tap https://www.amazon.com/gp/product/B00ZYLUBJU/ref=s9_acsd_al_bw_c_x_3_w (ESP8266)
     GPIO_USER,        // GPIO00 Optional sensor (pm clock)
     0,
     GPIO_LED1,        // GPIO02 Green Led (1 = On, 0 = Off)
     0, 0, 0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_USER,        // GPIO12 Optional sensor (pm data)
     GPIO_KEY1,        // GPIO13 Button
     0,
     GPIO_REL1,        // GPIO15 Relay (0 = Off, 1 = On)
     0, 0
  },
  { "Generic",         // Any ESP8266/ESP8285 device like WeMos and NodeMCU hardware (ESP8266)
     GPIO_USER,        // GPIO00 D3 Wemos Button Shield
     GPIO_USER,        // GPIO01 TX Serial RXD
     GPIO_USER,        // GPIO02 D4 Wemos DHT Shield
     GPIO_USER,        // GPIO03 RX Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 D2 Wemos I2C SDA
     GPIO_USER,        // GPIO05 D1 Wemos I2C SCL / Wemos Relay Shield (0 = Off, 1 = On) / Wemos WS2812B RGB led Shield
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_USER,        // GPIO12 D6
     GPIO_USER,        // GPIO13 D7
     GPIO_USER,        // GPIO14 D5
     GPIO_USER,        // GPIO15 D8
     GPIO_USER,        // GPIO16 D0 Wemos Wake
     GPIO_ADC0         // ADC0   A0 Analog input
  },
  { "Sonoff Dev",      // Sonoff Dev (ESP8266)
     GPIO_KEY1,        // GPIO00 E-FW Button
     GPIO_USER,        // GPIO01 TX Serial RXD and Optional sensor
     0,                // GPIO02
     GPIO_USER,        // GPIO03 RX Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 Optional sensor
     GPIO_USER,        // GPIO05 Optional sensor
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_USER,        // GPIO12
     GPIO_USER,        // GPIO13 BLUE LED
     GPIO_USER,        // GPIO14 Optional sensor
     0,                // GPIO15
     0,                // GPIO16
     GPIO_ADC0         // ADC0 A0 Analog input
  },
  { "H801",            // Lixada H801 Wifi (ESP8266)
     GPIO_KEY1,        // GPIO00 E-FW Button
     GPIO_LED1,        // GPIO01 Green LED
     GPIO_TXD,         // GPIO02 RX - Pin next to TX on the PCB
     GPIO_RXD,         // GPIO03 TX - Pin next to GND on the PCB
     GPIO_USER,        // GPIO04 W2 - PWM5
     GPIO_LED2_INV,    // GPIO05 Red LED
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_PWM3,        // GPIO12 Blue
     GPIO_PWM2,        // GPIO13 Green
     GPIO_USER,        // GPIO14 W1 - PWM4
     GPIO_PWM1,        // GPIO15 Red
     0, 0
  },
  { "Sonoff SC",       // Sonoff SC (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_TXD,         // GPIO01 RXD to ATMEGA328P
     GPIO_USER,        // GPIO02 Optional sensor
     GPIO_RXD,         // GPIO03 TXD to ATMEGA328P
     0, 0,
     0, 0, 0, 0, 0, 0, // Flash connection
     0,
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Sonoff BN-SZ",    // Sonoff BN-SZ01 Ceiling led (ESP8285)
     0, 0, 0, 0, 0, 0,
     0, 0, 0,          // Flash connection
     0, 0,
     0,                // Flash connection
     GPIO_PWM1,        // GPIO12 Light
     GPIO_LED1_INV,    // GPIO13 Red Led (0 = On, 1 = Off)
     0, 0,
     0, 0
  },
  { "Sonoff 4CH Pro",  // Sonoff 4CH Pro (ESP8285)
     GPIO_KEY1,        // GPIO00 Button 1
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_USER,        // GPIO02 Optional sensor
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_REL3,        // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On)
     GPIO_REL2,        // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On)
     0, 0, 0,          // Flash connection
     GPIO_KEY2,        // GPIO09 Button 2
     GPIO_KEY3,        // GPIO10 Button 3
     0,                // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     GPIO_KEY4,        // GPIO14 Button 4
     GPIO_REL4,        // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On)
     0, 0
  },
  { "Huafan SS",       // Hua Fan Smart Socket (ESP8266) - like Sonoff Pow
     GPIO_LED1_INV,    // GPIO0 Blue Led (0 = On, 1 = Off)
     0, 0,
     GPIO_LED2_INV,    // GPIO3 Red Led (0 = On, 1 = Off)
     GPIO_KEY1,        // GPIO4 Button
     GPIO_REL1_INV,    // GPIO5 Relay (0 = On, 1 = Off)
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_HLW_CF1,     // GPIO12 HLW8012 CF1 voltage / current
     GPIO_HLW_SEL,     // GPIO13 HLW8012 Sel output
     GPIO_HLW_CF,      // GPIO14 HLW8012 CF power
     0, 0, 0
  },
  { "Sonoff Bridge",   // Sonoff RF Bridge 433 (ESP8285)
     GPIO_KEY1,        // GPIO00 Button
     GPIO_TXD,         // GPIO01 RF bridge control
     GPIO_USER,        // GPIO02 Optional sensor
     GPIO_RXD,         // GPIO03 RF bridge control
     GPIO_USER,        // GPIO04 Optional sensor
     GPIO_USER,        // GPIO05 Optional sensor
     0, 0, 0,          // Flash connection
     0, 0,
     0,                // Flash connection
     0,
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Sonoff B1",       // Sonoff B1 (ESP8285 - my9231)
     GPIO_KEY1,        // GPIO00 Pad
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor pad
     GPIO_USER,        // GPIO02 Optional sensor SDA pad
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor pad
     0, 0,
     0, 0, 0,          // Flash connection
     0, 0,
     0,                // Flash connection
     GPIO_DI,          // GPIO12 my9231 DI
     0,
     GPIO_DCKI,        // GPIO14 my9231 DCKI
     0, 0, 0
  },
  { "AiLight",         // Ai-Thinker RGBW led (ESP8266 - my9291)
     GPIO_KEY1,        // GPIO00 Pad
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor pad
     GPIO_USER,        // GPIO02 Optional sensor SDA pad
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor pad
     0, 0,
     0, 0, 0,          // Flash connection
     0, 0,
     0,                // Flash connection
     0,
     GPIO_DI,          // GPIO13 my9291 DI
     0,
     GPIO_DCKI,        // GPIO15 my9291 DCKI
     0, 0
  },
  { "Sonoff T1 1CH",   // Sonoff T1 1CH (ESP8285)
     GPIO_KEY1,        // GPIO00 Button 1
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     0, 0,
     0, 0, 0,          // Flash connection
     0, 0,
     0,                // Flash connection
     GPIO_REL1,        // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Sonoff T1 2CH",   // Sonoff T1 2CH (ESP8285)
     GPIO_KEY1,        // GPIO00 Button 1
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     0,
     GPIO_REL2,        // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On)
     0, 0, 0,          // Flash connection
     GPIO_KEY2,        // GPIO09 Button 2
     0,
     0,                // Flash connection
     GPIO_REL1,        // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Sonoff T1 3CH",   // Sonoff T1 3CH (ESP8285)
     GPIO_KEY1,        // GPIO00 Button 1
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_REL3,        // GPIO04 Blue Led and Relay 3 (0 = Off, 1 = On)
     GPIO_REL2,        // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On)
     0, 0, 0,          // Flash connection
     GPIO_KEY2,        // GPIO09 Button 2
     GPIO_KEY3,        // GPIO10 Button 3
     0,                // Flash connection
     GPIO_REL1,        // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Supla Espablo",   // Supla Espablo (ESP8266) - http://www.wykop.pl/ramka/3325399/diy-supla-do-puszki-instalacyjnej-podtynkowej-supla-org/
     0,                // GPIO00 Flash jumper
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_DSB,         // GPIO02 DS18B20 sensor
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_KEY1,        // GPIO04 Button 1
     GPIO_REL1,        // GPIO05 Relay 1 (0 = Off, 1 = On)
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_USER,        // GPIO12 Optional sensor
     GPIO_REL2,        // GPIO13 Relay 2 (0 = Off, 1 = On)
     GPIO_USER,        // GPIO14 Optional sensor
     0,
     GPIO_LED1,        // GPIO16 Led (1 = On, 0 = Off)
     GPIO_ADC0         // ADC0 A0 Analog input
  },
  { "Witty Cloud",     // Witty Cloud Dev Board (ESP8266) - https://www.aliexpress.com/item/ESP8266-serial-WIFI-Witty-cloud-Development-Board-ESP-12F-module-MINI-nodemcu/32643464555.html
     GPIO_USER,        // GPIO00 D3 flash push button on interface board
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_LED1_INV,    // GPIO02 D4 Blue Led (0 = On, 1 = Off) on ESP-12F
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_KEY1,        // GPIO04 D2 push button on ESP-12F board
     GPIO_USER,        // GPIO05 D1 optional sensor
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_PWM2,        // GPIO12 D6 RGB LED Green
     GPIO_PWM3,        // GPIO13 D7 RGB LED Blue
     GPIO_USER,        // GPIO14 D5 optional sensor
     GPIO_PWM1,        // GPIO15 D8 RGB LED Red
     GPIO_USER,        // GPIO16 D0 optional sensor
     GPIO_ADC0         // ADC0 A0 Light sensor / Requires USE_ADC_VCC in user_config.h to be disabled
  },
  { "Yunshan Relay",   // Yunshan Wifi Relay (ESP8266) - https://www.ebay.com/p/Esp8266-220v-10a-Network-Relay-WiFi-Module/1369583381
                       // Schematics and Info https://ucexperiment.wordpress.com/2016/12/18/yunshan-esp8266-250v-15a-acdc-network-wifi-relay-module/
     0,                // GPIO00 Flash jumper - Module Pin 8
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor - Module Pin 2
     GPIO_LED1_INV,    // GPIO02 Blue Led (0 = On, 1 = Off) on ESP-12F - Module Pin 7
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor - Module Pin 3
     GPIO_REL1,        // GPIO04 Red Led and Relay (0 = Off, 1 = On) - Module Pin 10
     GPIO_KEY1,        // GPIO05 Blue Led and OptoCoupler input - Module Pin 9
     0, 0, 0, 0, 0, 0, // Flash connection
     0, 0, 0, 0, 0
  },
  { "MagicHome",       // Magic Home (aka Flux-light) (ESP8266) - https://www.aliexpress.com/item/Magic-Home-Mini-RGB-RGBW-Wifi-Controller-For-Led-Strip-Panel-light-Timing-Function-16million-colors/32686853650.html
     0,
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_LED1_INV,    // GPIO02 Blue onboard LED
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 IR receiver (optional)
     GPIO_PWM2,        // GPIO05 RGB LED Green
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_PWM3,        // GPIO12 RGB LED Blue
     GPIO_USER,        // GPIO13 RGBW LED White (optional - set to PWM4 for Cold White or Warm White)
     GPIO_PWM1,        // GPIO14 RGB LED Red
     0, 0, 0
  },
  { "Luani HVIO",      // ESP8266_HVIO - https://luani.de/projekte/esp8266-hvio/
     0,                // GPIO00 Flash jumper
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_USER,        // GPIO02 Optional sensor / I2C SDA pad
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_REL1,        // GPIO04 Relay 1 (0 = Off, 1 = On)
     GPIO_REL2,        // GPIO05 Relay 2 (0 = Off, 1 = On)
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_SWT1,        // GPIO12 External input 1 (0 = On, 1 = Off)
     GPIO_SWT2,        // GPIO13 External input 2 (0 = On, 1 = Off)
     GPIO_USER,        // GPIO14 Optional sensor / I2C SCL pad
     GPIO_LED1,        // GPIO15 Led (1 = On, 0 = Off)
     0,
     GPIO_ADC0         // ADC0 A0 Analog input
  },
  { "KMC 70011",       // KMC 70011 (https://www.amazon.com/KMC-Timing-Monitoring-Network-125V-240V/dp/B06XRX2GTQ)
     GPIO_KEY1,        // GPIO00 Button
     0, 0, 0,
     GPIO_HLW_CF,      // GPIO04 HLW8012 CF
     GPIO_HLW_CF1,     // GPIO05 HLW8012 CF1
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_HLW_SEL,     // GPIO12 HLW8012 SEL
     GPIO_LED1_INV,    // GPIO13 Green Led
     GPIO_REL1,        // GPIO14 Relay
     0, 0, 0
  },
  { "Arilux LC01",     // Arilux AL-LC01 (ESP8285) - https://www.banggood.com/nl/ARILUX-AL-LC01-Super-Mini-LED-WIFI-Smart-RGB-Controller-For-RGB-LED-Strip-Light-DC-9-12V-p-1058603.html
                       //  (PwmFrequency 1111Hz)
     GPIO_KEY1,        // GPIO00 Optional Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_LED2_INV,    // GPIO02 RF receiver control
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_ARIRFRCV,    // GPIO04 IR or RF receiver (optional)
     GPIO_PWM1,        // GPIO05 RGB LED Red
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_PWM2,        // GPIO12 RGB LED Green
     GPIO_PWM3,        // GPIO13 RGB LED Blue
     GPIO_USER,        // GPIO14 RGBW LED White (optional - set to PWM4 for Cold White or Warm White)
     0, 0, 0
  },
  { "Arilux LC11",     // Arilux AL-LC11 (ESP8266) - https://www.banggood.com/nl/ARILUX-AL-LC11-Super-Mini-LED-WIFI-APP-Controller-RF-Remote-Control-For-RGBWW-LED-Strip-DC9-28V-p-1085112.html
                       //  (PwmFrequency 540Hz)
     GPIO_KEY1,        // GPIO00 Optional Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_LED2_INV,    // GPIO02 RF receiver control
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_PWM2,        // GPIO04 RGB LED Green
     GPIO_PWM1,        // GPIO05 RGB LED Red
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_PWM5,        // GPIO12 RGBCW LED Warm
     GPIO_PWM4,        // GPIO13 RGBW LED Cold
     GPIO_PWM3,        // GPIO14 RGB LED Blue
     GPIO_ARIRFRCV,    // GPIO15 RF receiver input
     0, 0
  },
  { "Sonoff Dual R2",  // Sonoff Dual R2 (ESP8285)
     GPIO_USER,        // GPIO00 Button 0 on header (0 = On, 1 = Off)
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     0,
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     0,
     GPIO_REL2,        // GPIO05 Relay 2 (0 = Off, 1 = On)
     0, 0, 0,          // Flash connection
     GPIO_USER,        // GPIO09 Button 1 on header (0 = On, 1 = Off)
     GPIO_KEY1,        // GPIO10 Button on casing
     0,                // Flash connection
     GPIO_REL1,        // GPIO12 Relay 1 (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Blue Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Arilux LC06",     // Arilux AL-LC06 (ESP8285) - https://www.banggood.com/ARILUX-AL-LC06-LED-WIFI-Smartphone-Controller-Romote-5-Channels-DC12-24V-For-RGBWW-Strip-light-p-1061476.html
     GPIO_KEY1,        // GPIO00 Optional Button
     GPIO_USER,        // GPIO01 Serial RXD and Optional sensor
     GPIO_USER,        // GPIO02 Empty pad
     GPIO_USER,        // GPIO03 Serial TXD and Optional sensor
     GPIO_USER,        // GPIO04 W2 - PWM5
     0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_PWM2,        // GPIO12 RGB LED Green
     GPIO_PWM3,        // GPIO13 RGB LED Blue
     GPIO_PWM1,        // GPIO14 RGB LED Red
     GPIO_USER,        // GPIO15 RGBW LED White
     0, 0
  },
  { "Sonoff S31",      // Sonoff S31 (ESP8266)
     GPIO_KEY1,        // GPIO00 Button
     0,                // GPIO01 Serial RXD 4800 baud 8E1 CSE7766 energy sensor
     0,
     0,                // GPIO03 Serial TXD
     0, 0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Red Led and Relay (0 = Off, 1 = On)
     GPIO_LED1_INV,    // GPIO13 Green Led (0 = On, 1 = Off)
     0, 0, 0, 0
  },
  { "Zengge WF017",    // Zenggee ZJ-WF017-A (ESP12S)) - https://www.ebay.com/p/Smartphone-Android-IOS-WiFi-Music-Controller-for-RGB-5050-3528-LED-Strip-Light/534446632?_trksid=p2047675.l2644
     GPIO_KEY1,        // GPIO00 Optional Button
     0,
     GPIO_USER,        // GPIO02 Empty pad
     0,
     GPIO_USER,        // GPIO04 W2 - PWM5
     0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_PWM2,        // GPIO12 RGB LED Green
     GPIO_PWM1,        // GPIO13 RGB LED Red
     GPIO_PWM3,        // GPIO14 RGB LED Blue
     0, 0, 0
  }
};

/*
  Optionals

  { "Xenon 3CH",       // Xenon 3CH (ESP8266) - (#1128)
     0, 0, 0,
     GPIO_KEY2,        // GPIO03 Serial TXD and Optional sensor
     GPIO_REL2,        // GPIO04 Relay 2
     GPIO_KEY3,        // GPIO05 Input 2
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_KEY1,        // GPIO12 Key input
     GPIO_REL1,        // GPIO13 Relay 1
     0,
     GPIO_REL3,        // GPIO15 Relay 3
     0, 0
  }

  { "PowStro Basic",   // PowStro (ESP8266) - (#1419)
     0, 0, 0, 0,
     GPIO_REL1,        // GPIO04 Relay (0 = Off, 1 = On)
     0,
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_KEY1,        // GPIO12 Button
     0, 0,
     GPIO_LED1,        // GPIO15 Led (1 = On, 0 = Off)
     0, 0
  }

  { "SMPW701E",        // SM-PW701E WLAN Socket (#1190)
     0, 0, 0, 0,
     GPIO_LED1_INV,    // GPIO04 Blue Led (0 = On, 1 = Off)
     0,                // GPIO05 IR or RF receiver (optional)
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_REL1,        // GPIO12 Relay and Red Led (0 = Off, 1 = On)
     GPIO_KEY1,        // GPIO13 Button
     0, 0, 0, 0
  }

  { "SWA1",            // Smart Plugs (ESP8266)
     0,
     GPIO_USER,        // GPIO01
     0,
     GPIO_USER,        // GPIO03
     GPIO_LED1_INV,    // GPIO04 Blue LED
     GPIO_REL1,        // GPIO05 Red LED and relay
     0, 0, 0, 0, 0, 0, // Flash connection
     0,
     GPIO_KEY1,        // GPIO13 Button (normally GPIO00)
     GPIO_USER,        // GPIO14
     0, 0, 0
  }

  { "MagicHome v2.3",  // Magic Home (aka Flux-light) (ESP8266) (#1353)
     0, 0,
     GPIO_LED1_INV,    // GPIO02 Blue onboard LED
     0,
     GPIO_USER,        // GPIO04 IR receiver (optional)
     GPIO_PWM2,        // GPIO05 RGB LED Green
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_PWM1,        // GPIO12 RGB LED Red
     GPIO_PWM3,        // GPIO13 RGB LED Blue
     0,
     GPIO_PWM4,        // GPIO15 RGBW LED White
     0, 0
  }

  { "Ledunia",         // Ledunia (ESP8266) - http://ledunia.de/
     GPIO_USER,        // GPIO00 (D0)
     GPIO_USER,        // GPIO01 (D7) Serial RXD
     GPIO_USER,        // GPIO02 (D2)
     GPIO_USER,        // GPIO03 (D8) Serial TXD
     GPIO_USER,        // GPIO04 (D4) 4 x WS2812 Leds, (DOUT) Extents WS2812 string
     GPIO_USER,        // GPIO05 (D5) Blue Led
     0, 0, 0, 0, 0, 0, // Flash connection
     GPIO_USER,        // GPIO12 (D12)
     GPIO_USER,        // GPIO13 (D13)
     GPIO_USER,        // GPIO14 (D14)
     GPIO_USER,        // GPIO15 (D15)
     GPIO_USER,        // GPIO16 (D16)
     0                 // ADC0 Analog input (A0)
  },

*/

#endif  // _SONOFF_TEMPLATE_H_