Tasmota/sonoff/xsns_14_sht3x.ino

135 lines
4.0 KiB
Arduino
Raw Normal View History

/*
xsns_14_sht3x.ino - SHT3X temperature and humidity sensor support for Sonoff-Tasmota
Copyright (C) 2018 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_I2C
#ifdef USE_SHT3X
/*********************************************************************************************\
* SHT3X - Temperature and Humidy
*
* I2C Address: 0x44 or 0x45
\*********************************************************************************************/
#define SHT3X_ADDR_GND 0x44 // address pin low (GND)
#define SHT3X_ADDR_VDD 0x45 // address pin high (VDD)
uint8_t sht3x_type = 0;
uint8_t sht3x_address;
uint8_t sht3x_addresses[] = { SHT3X_ADDR_GND, SHT3X_ADDR_VDD };
bool Sht3xRead(float &t, float &h)
{
unsigned int data[6];
t = NAN;
h = NAN;
Wire.beginTransmission(sht3x_address);
Wire.write(0x2C); // Enable clock stretching
Wire.write(0x06); // High repeatability
if (Wire.endTransmission() != 0) { // Stop I2C transmission
return false;
}
delay(30); // Timing verified with logic analyzer (10 is to short)
Wire.requestFrom(sht3x_address, (uint8_t)6); // Request 6 bytes of data
for (int i = 0; i < 6; i++) {
data[i] = Wire.read(); // cTemp msb, cTemp lsb, cTemp crc, humidity msb, humidity lsb, humidity crc
};
t = ConvertTemp((float)((((data[0] << 8) | data[1]) * 175) / 65535.0) - 45);
h = (float)((((data[3] << 8) | data[4]) * 100) / 65535.0);
return (!isnan(t) && !isnan(h));
}
/********************************************************************************************/
void Sht3xDetect()
{
if (sht3x_type) {
return;
}
float t;
float h;
sht3x_type = 1;
for (byte i = 0; i < sizeof(sht3x_addresses); i++) {
sht3x_address = sht3x_addresses[i];
if (Sht3xRead(t, h)) {
snprintf_P(log_data, sizeof(log_data), S_LOG_I2C_FOUND_AT, "SHT3X", sht3x_address);
AddLog(LOG_LEVEL_DEBUG);
return;
}
}
sht3x_type = 0;
}
void Sht3xShow(boolean json)
{
if (sht3x_type) {
float t;
float h;
if (Sht3xRead(t, h)) {
char temperature[10];
char humidity[10];
dtostrfd(t, Settings.flag2.temperature_resolution, temperature);
dtostrfd(h, Settings.flag2.humidity_resolution, humidity);
if (json) {
snprintf_P(mqtt_data, sizeof(mqtt_data), JSON_SNS_TEMPHUM, mqtt_data, "SHT3X", temperature, humidity);
#ifdef USE_DOMOTICZ
DomoticzTempHumSensor(temperature, humidity);
#endif // USE_DOMOTICZ
#ifdef USE_WEBSERVER
} else {
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_TEMP, mqtt_data, "SHT3X", temperature, TempUnit());
snprintf_P(mqtt_data, sizeof(mqtt_data), HTTP_SNS_HUM, mqtt_data, "SHT3X", humidity);
#endif // USE_WEBSERVER
}
}
}
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
#define XSNS_14
boolean Xsns14(byte function)
{
boolean result = false;
if (i2c_flg) {
switch (function) {
case FUNC_INIT:
Sht3xDetect();
break;
case FUNC_JSON_APPEND:
Sht3xShow(1);
break;
#ifdef USE_WEBSERVER
case FUNC_WEB_APPEND:
Sht3xShow(0);
break;
#endif // USE_WEBSERVER
}
}
return result;
}
#endif // USE_SHT3X
#endif // USE_I2C