Tasmota/sonoff/support.ino

1016 lines
30 KiB
Arduino
Raw Normal View History

2017-01-28 13:41:01 +00:00
/*
Copyright (c) 2017 Theo Arends. All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
- Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
- Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
*/
const char JSON_SNS_TEMPHUM[] PROGMEM =
"%s, \"%s\":{\"Temperature\":%s, \"Humidity\":%s}";
/*********************************************************************************************\
* Watchdog extension (https://github.com/esp8266/Arduino/issues/1532)
\*********************************************************************************************/
Ticker tickerOSWatch;
#define OSWATCH_RESET_TIME 30
static unsigned long osw_last_loop;
byte osw_flag = 0;
#ifndef USE_WS2812_DMA // Collides with Neopixelbus but solves exception
void osw_osWatch() ICACHE_RAM_ATTR;
#endif // USE_WS2812_DMA
void osw_osWatch()
{
unsigned long t = millis();
unsigned long last_run = abs(t - osw_last_loop);
#ifdef DEBUG_THEO
char log[LOGSZ];
snprintf_P(log, sizeof(log), PSTR("osWatch: FreeRam %d, rssi %d, last_run %d"), ESP.getFreeHeap(), WIFI_getRSSIasQuality(WiFi.RSSI()), last_run);
addLog(LOG_LEVEL_DEBUG, log);
#endif // DEBUG_THEO
if (last_run >= (OSWATCH_RESET_TIME * 1000)) {
addLog_P(LOG_LEVEL_INFO, PSTR("osWatch: Warning, loop blocked. Restart now"));
rtcMem.osw_flag = 1;
RTC_Save();
// ESP.restart(); // normal reboot
ESP.reset(); // hard reset
}
}
void osw_init()
{
osw_flag = rtcMem.osw_flag;
rtcMem.osw_flag = 0;
osw_last_loop = millis();
tickerOSWatch.attach_ms(((OSWATCH_RESET_TIME / 3) * 1000), osw_osWatch);
}
void osw_loop()
{
osw_last_loop = millis();
// while(1) delay(1000); // this will trigger the os watch
}
String getResetReason()
{
char buff[32];
if (osw_flag) {
strcpy_P(buff, PSTR("Blocked Loop"));
return String(buff);
} else {
return ESP.getResetReason();
}
}
#ifdef DEBUG_THEO
void exception_tst(byte type)
{
/*
Exception (28):
epc1=0x4000bf64 epc2=0x00000000 epc3=0x00000000 excvaddr=0x00000007 depc=0x00000000
ctx: cont
sp: 3fff1f30 end: 3fff2840 offset: 01a0
>>>stack>>>
3fff20d0: 202c3573 756f7247 2c302070 646e4920
3fff20e0: 40236a6e 7954202c 45206570 00454358
3fff20f0: 00000010 00000007 00000000 3fff2180
3fff2100: 3fff2190 40107bfc 3fff3e4c 3fff22c0
3fff2110: 40261934 000000f0 3fff22c0 401004d8
3fff2120: 40238fcf 00000050 3fff2100 4021fc10
3fff2130: 3fff32bc 4021680c 3ffeade1 4021ff7d
3fff2140: 3fff2190 3fff2180 0000000c 7fffffff
3fff2150: 00000019 00000000 00000000 3fff21c0
3fff2160: 3fff23f3 3ffe8e08 00000000 4021ffb4
3fff2170: 3fff2190 3fff2180 0000000c 40201118
3fff2180: 3fff21c0 0000003c 3ffef840 00000007
3fff2190: 00000000 00000000 00000000 40201128
3fff21a0: 3fff23f3 000000f1 3fff23ec 4020fafb
3fff21b0: 3fff23f3 3fff21c0 3fff21d0 3fff23f6
3fff21c0: 00000000 3fff23fb 4022321b 00000000
Exception 28: LoadProhibited: A load referenced a page mapped with an attribute that does not permit loads
Decoding 14 results
0x40236a6e: ets_vsnprintf at ?? line ?
0x40107bfc: vsnprintf at C:\Data2\Arduino\arduino-1.8.1-esp-2.3.0\portable\packages\esp8266\hardware\esp8266\2.3.0\cores\esp8266/libc_replacements.c line 387
0x40261934: bignum_exptmod at ?? line ?
0x401004d8: malloc at C:\Data2\Arduino\arduino-1.8.1-esp-2.3.0\portable\packages\esp8266\hardware\esp8266\2.3.0\cores\esp8266\umm_malloc/umm_malloc.c line 1664
0x40238fcf: wifi_station_get_connect_status at ?? line ?
0x4021fc10: operator new[](unsigned int) at C:\Data2\Arduino\arduino-1.8.1-esp-2.3.0\portable\packages\esp8266\hardware\esp8266\2.3.0\cores\esp8266/abi.cpp line 57
0x4021680c: ESP8266WiFiSTAClass::status() at C:\Data2\Arduino\arduino-1.8.1-esp-2.3.0\portable\packages\esp8266\hardware\esp8266\2.3.0\libraries\ESP8266WiFi\src/ESP8266WiFiSTA.cpp line 569
0x4021ff7d: vsnprintf_P(char*, unsigned int, char const*, __va_list_tag) at C:\Data2\Arduino\arduino-1.8.1-esp-2.3.0\portable\packages\esp8266\hardware\esp8266\2.3.0\cores\esp8266/pgmspace.cpp line 146
0x4021ffb4: snprintf_P(char*, unsigned int, char const*, ...) at C:\Data2\Arduino\arduino-1.8.1-esp-2.3.0\portable\packages\esp8266\hardware\esp8266\2.3.0\cores\esp8266/pgmspace.cpp line 146
0x40201118: atol at C:\Data2\Arduino\arduino-1.8.1-esp-2.3.0\portable\packages\esp8266\hardware\esp8266\2.3.0\cores\esp8266/core_esp8266_noniso.c line 45
0x40201128: atoi at C:\Data2\Arduino\arduino-1.8.1-esp-2.3.0\portable\packages\esp8266\hardware\esp8266\2.3.0\cores\esp8266/core_esp8266_noniso.c line 45
0x4020fafb: mqttDataCb(char*, unsigned char*, unsigned int) at R:\Arduino\Work-ESP8266\Theo\sonoff\sonoff-4\sonoff/sonoff.ino line 679 (discriminator 1)
0x4022321b: pp_attach at ?? line ?
00:00:08 MQTT: tele/sonoff/INFO3 = {"Started":"Fatal exception:28 flag:2 (EXCEPTION) epc1:0x4000bf64 epc2:0x00000000 epc3:0x00000000 excvaddr:0x00000007 depc:0x00000000"}
*/
if (1 == type) {
char svalue[10];
snprintf_P(svalue, sizeof(svalue), PSTR("%s"), 7); // Exception 28 as number in string (7 in excvaddr)
}
/*
14:50:52 osWatch: FreeRam 25896, rssi 68, last_run 0
14:51:02 osWatch: FreeRam 25896, rssi 58, last_run 0
14:51:03 CMND: exception 2
14:51:12 osWatch: FreeRam 25360, rssi 60, last_run 8771
14:51:22 osWatch: FreeRam 25360, rssi 62, last_run 18771
14:51:32 osWatch: FreeRam 25360, rssi 62, last_run 28771
14:51:42 osWatch: FreeRam 25360, rssi 62, last_run 38771
14:51:42 osWatch: Warning, loop blocked. Restart now
*/
if (2 == type) {
while(1) delay(1000); // this will trigger the os watch
}
}
#endif // DEBUG_THEO
/*********************************************************************************************\
* General
\*********************************************************************************************/
boolean parseIP(uint32_t* addr, const char* str)
{
uint8_t *part = (uint8_t*)addr;
byte i;
*addr = 0;
for (i = 0; i < 4; i++) {
part[i] = strtoul(str, NULL, 10); // Convert byte
str = strchr(str, '.');
if (str == NULL || *str == '\0') {
break; // No more separators, exit
}
str++; // Point to next character after separator
}
return (3 == i);
}
2017-01-28 13:41:01 +00:00
/*********************************************************************************************\
* Wifi
\*********************************************************************************************/
#define WIFI_CONFIG_SEC 180 // seconds before restart
#define WIFI_MANAGER_SEC 180 // seconds before restart
2017-01-28 13:41:01 +00:00
#define WIFI_CHECK_SEC 20 // seconds
#define WIFI_RETRY_SEC 30 // seconds
uint8_t _wificounter;
uint8_t _wifiretry;
uint8_t _wifistatus;
uint8_t _wpsresult;
uint8_t _wificonfigflag = 0;
uint8_t _wifiConfigCounter = 0;
2017-01-28 13:41:01 +00:00
int WIFI_getRSSIasQuality(int RSSI)
{
int quality = 0;
if (RSSI <= -100) {
quality = 0;
} else if (RSSI >= -50) {
quality = 100;
} else {
quality = 2 * (RSSI + 100);
}
return quality;
}
boolean WIFI_configCounter()
{
if (_wifiConfigCounter) {
_wifiConfigCounter = WIFI_MANAGER_SEC;
}
2017-01-28 13:41:01 +00:00
return (_wifiConfigCounter);
}
extern "C" {
#include "user_interface.h"
}
void WIFI_wps_status_cb(wps_cb_status status);
void WIFI_wps_status_cb(wps_cb_status status)
{
char log[LOGSZ];
/* from user_interface.h:
enum wps_cb_status {
WPS_CB_ST_SUCCESS = 0,
WPS_CB_ST_FAILED,
WPS_CB_ST_TIMEOUT,
WPS_CB_ST_WEP, // WPS failed because that WEP is not supported
WPS_CB_ST_SCAN_ERR, // can not find the target WPS AP
};
*/
_wpsresult = status;
if (WPS_CB_ST_SUCCESS == _wpsresult) {
2017-01-28 13:41:01 +00:00
wifi_wps_disable();
} else {
snprintf_P(log, sizeof(log), PSTR("WPSconfig: FAILED with status %d"), _wpsresult);
addLog(LOG_LEVEL_DEBUG, log);
_wifiConfigCounter = 2;
}
}
boolean WIFI_WPSConfigDone(void)
{
return (!_wpsresult);
}
boolean WIFI_beginWPSConfig(void)
{
_wpsresult = 99;
if (!wifi_wps_disable()) {
return false;
}
if (!wifi_wps_enable(WPS_TYPE_PBC)) {
return false; // so far only WPS_TYPE_PBC is supported (SDK 2.0.0)
}
if (!wifi_set_wps_cb((wps_st_cb_t) &WIFI_wps_status_cb)) {
return false;
}
if (!wifi_wps_start()) {
return false;
}
2017-01-28 13:41:01 +00:00
return true;
}
void WIFI_config(uint8_t type)
{
if (!_wificonfigflag) {
if (WIFI_RETRY == type) {
return;
}
#ifdef USE_EMULATION
2017-01-28 13:41:01 +00:00
UDP_Disconnect();
#endif // USE_EMULATION
2017-01-28 13:41:01 +00:00
WiFi.disconnect(); // Solve possible Wifi hangs
_wificonfigflag = type;
_wifiConfigCounter = WIFI_CONFIG_SEC; // Allow up to WIFI_CONFIG_SECS seconds for phone to provide ssid/pswd
_wificounter = _wifiConfigCounter +5;
blinks = 1999;
if (WIFI_RESTART == _wificonfigflag) {
2017-01-28 13:41:01 +00:00
restartflag = 2;
}
else if (WIFI_SMARTCONFIG == _wificonfigflag) {
2017-01-28 13:41:01 +00:00
addLog_P(LOG_LEVEL_INFO, PSTR("Smartconfig: Active for 1 minute"));
WiFi.beginSmartConfig();
}
else if (WIFI_WPSCONFIG == _wificonfigflag) {
2017-01-28 13:41:01 +00:00
if (WIFI_beginWPSConfig()) {
addLog_P(LOG_LEVEL_INFO, PSTR("WPSconfig: Active for 1 minute"));
} else {
addLog_P(LOG_LEVEL_INFO, PSTR("WPSconfig: Failed to start"));
_wifiConfigCounter = 3;
}
}
#ifdef USE_WEBSERVER
else if (WIFI_MANAGER == _wificonfigflag) {
2017-01-28 13:41:01 +00:00
addLog_P(LOG_LEVEL_INFO, PSTR("Wifimanager: Active for 1 minute"));
beginWifiManager();
}
#endif // USE_WEBSERVER
}
}
void WIFI_begin(uint8_t flag)
{
const char PhyMode[] = " BGN";
char log[LOGSZ];
#ifdef USE_EMULATION
2017-01-28 13:41:01 +00:00
UDP_Disconnect();
#endif // USE_EMULATION
2017-01-28 13:41:01 +00:00
if (!strncmp(ESP.getSdkVersion(),"1.5.3",5)) {
addLog_P(LOG_LEVEL_DEBUG, "Wifi: Patch issue 2186");
WiFi.mode(WIFI_OFF); // See https://github.com/esp8266/Arduino/issues/2186
}
WiFi.disconnect();
WiFi.mode(WIFI_STA); // Disable AP mode
if (sysCfg.sleep) {
WiFi.setSleepMode(WIFI_LIGHT_SLEEP); // Allow light sleep during idle times
}
// if (WiFi.getPhyMode() != WIFI_PHY_MODE_11N) {
// WiFi.setPhyMode(WIFI_PHY_MODE_11N);
// }
if (!WiFi.getAutoConnect()) {
WiFi.setAutoConnect(true);
}
2017-01-28 13:41:01 +00:00
// WiFi.setAutoReconnect(true);
switch (flag) {
case 0: // AP1
case 1: // AP2
sysCfg.sta_active = flag;
break;
case 2: // Toggle
sysCfg.sta_active ^= 1;
} // 3: Current AP
if (0 == strlen(sysCfg.sta_ssid[1])) {
sysCfg.sta_active = 0;
}
if (sysCfg.ip_address[0]) {
WiFi.config(sysCfg.ip_address[0], sysCfg.ip_address[1], sysCfg.ip_address[2], sysCfg.ip_address[3]); // Set static IP
}
WiFi.hostname(Hostname);
2017-01-28 13:41:01 +00:00
WiFi.begin(sysCfg.sta_ssid[sysCfg.sta_active], sysCfg.sta_pwd[sysCfg.sta_active]);
snprintf_P(log, sizeof(log), PSTR("Wifi: Connecting to AP%d %s in mode 11%c as %s..."),
sysCfg.sta_active +1, sysCfg.sta_ssid[sysCfg.sta_active], PhyMode[WiFi.getPhyMode() & 0x3], Hostname);
addLog(LOG_LEVEL_INFO, log);
}
void WIFI_check_ip()
{
if ((WL_CONNECTED == WiFi.status()) && (static_cast<uint32_t>(WiFi.localIP()) != 0)) {
2017-01-28 13:41:01 +00:00
_wificounter = WIFI_CHECK_SEC;
_wifiretry = WIFI_RETRY_SEC;
addLog_P((_wifistatus != WL_CONNECTED) ? LOG_LEVEL_INFO : LOG_LEVEL_DEBUG_MORE, PSTR("Wifi: Connected"));
if (_wifistatus != WL_CONNECTED) {
// addLog_P(LOG_LEVEL_INFO, PSTR("Wifi: Set IP addresses"));
sysCfg.ip_address[1] = (uint32_t)WiFi.gatewayIP();
sysCfg.ip_address[2] = (uint32_t)WiFi.subnetMask();
sysCfg.ip_address[3] = (uint32_t)WiFi.dnsIP();
}
2017-01-28 13:41:01 +00:00
_wifistatus = WL_CONNECTED;
} else {
_wifistatus = WiFi.status();
switch (_wifistatus) {
case WL_CONNECTED:
addLog_P(LOG_LEVEL_INFO, PSTR("Wifi: Connect failed as no IP address received"));
_wifistatus = 0;
_wifiretry = WIFI_RETRY_SEC;
break;
case WL_NO_SSID_AVAIL:
addLog_P(LOG_LEVEL_INFO, PSTR("Wifi: Connect failed as AP cannot be reached"));
if (_wifiretry > (WIFI_RETRY_SEC / 2)) {
_wifiretry = WIFI_RETRY_SEC / 2;
}
else if (_wifiretry) {
_wifiretry = 0;
}
2017-01-28 13:41:01 +00:00
break;
case WL_CONNECT_FAILED:
addLog_P(LOG_LEVEL_INFO, PSTR("Wifi: Connect failed with AP incorrect password"));
if (_wifiretry > (WIFI_RETRY_SEC / 2)) {
_wifiretry = WIFI_RETRY_SEC / 2;
}
else if (_wifiretry) {
_wifiretry = 0;
}
2017-01-28 13:41:01 +00:00
break;
default: // WL_IDLE_STATUS and WL_DISCONNECTED
if (!_wifiretry || ((WIFI_RETRY_SEC / 2) == _wifiretry)) {
2017-01-28 13:41:01 +00:00
addLog_P(LOG_LEVEL_INFO, PSTR("Wifi: Connect failed with AP timeout"));
} else {
addLog_P(LOG_LEVEL_DEBUG, PSTR("Wifi: Attempting connection..."));
}
}
if (_wifiretry) {
if (WIFI_RETRY_SEC == _wifiretry) {
WIFI_begin(3); // Select default SSID
}
if ((WIFI_RETRY_SEC / 2) == _wifiretry) {
WIFI_begin(2); // Select alternate SSID
}
2017-01-28 13:41:01 +00:00
_wificounter = 1;
_wifiretry--;
} else {
WIFI_config(sysCfg.sta_config);
_wificounter = 1;
_wifiretry = WIFI_RETRY_SEC;
}
}
}
void WIFI_Check(uint8_t param)
{
char log[LOGSZ];
_wificounter--;
switch (param) {
case WIFI_SMARTCONFIG:
case WIFI_MANAGER:
case WIFI_WPSCONFIG:
WIFI_config(param);
break;
default:
if (_wifiConfigCounter) {
_wifiConfigCounter--;
_wificounter = _wifiConfigCounter +5;
if (_wifiConfigCounter) {
if ((WIFI_SMARTCONFIG == _wificonfigflag) && WiFi.smartConfigDone()) {
_wifiConfigCounter = 0;
}
if ((WIFI_WPSCONFIG == _wificonfigflag) && WIFI_WPSConfigDone()) {
_wifiConfigCounter = 0;
}
2017-01-28 13:41:01 +00:00
if (!_wifiConfigCounter) {
if (strlen(WiFi.SSID().c_str())) {
strlcpy(sysCfg.sta_ssid[0], WiFi.SSID().c_str(), sizeof(sysCfg.sta_ssid[0]));
}
if (strlen(WiFi.psk().c_str())) {
strlcpy(sysCfg.sta_pwd[0], WiFi.psk().c_str(), sizeof(sysCfg.sta_pwd[0]));
}
2017-01-28 13:41:01 +00:00
sysCfg.sta_active = 0;
snprintf_P(log, sizeof(log), PSTR("Wificonfig: SSID1 %s and Password1 %s"), sysCfg.sta_ssid[0], sysCfg.sta_pwd[0]);
addLog(LOG_LEVEL_INFO, log);
}
}
if (!_wifiConfigCounter) {
if (WIFI_SMARTCONFIG == _wificonfigflag) {
WiFi.stopSmartConfig();
}
2017-01-28 13:41:01 +00:00
restartflag = 2;
}
} else {
if (_wificounter <= 0) {
addLog_P(LOG_LEVEL_DEBUG_MORE, PSTR("Wifi: Checking connection..."));
_wificounter = WIFI_CHECK_SEC;
WIFI_check_ip();
}
if ((WL_CONNECTED == WiFi.status()) && (static_cast<uint32_t>(WiFi.localIP()) != 0) && !_wificonfigflag) {
2017-01-28 13:41:01 +00:00
#ifdef USE_DISCOVERY
if (!mDNSbegun) {
mDNSbegun = MDNS.begin(Hostname);
snprintf_P(log, sizeof(log), PSTR("mDNS: %s"), (mDNSbegun)?"Initialized":"Failed");
addLog(LOG_LEVEL_INFO, log);
}
#endif // USE_DISCOVERY
#ifdef USE_WEBSERVER
if (sysCfg.webserver) {
startWebserver(sysCfg.webserver, WiFi.localIP());
#ifdef USE_DISCOVERY
#ifdef WEBSERVER_ADVERTISE
MDNS.addService("http", "tcp", 80);
#endif // WEBSERVER_ADVERTISE
#endif // USE_DISCOVERY
} else {
stopWebserver();
}
#ifdef USE_EMULATION
if (sysCfg.flag.emulation) {
UDP_Connect();
}
#endif // USE_EMULATION
2017-01-28 13:41:01 +00:00
#endif // USE_WEBSERVER
} else {
#ifdef USE_EMULATION
2017-01-28 13:41:01 +00:00
UDP_Disconnect();
#endif // USE_EMULATION
2017-01-28 13:41:01 +00:00
mDNSbegun = false;
}
}
}
}
int WIFI_State()
{
int state;
if ((WL_CONNECTED == WiFi.status()) && (static_cast<uint32_t>(WiFi.localIP()) != 0)) {
state = WIFI_RESTART;
}
if (_wificonfigflag) {
state = _wificonfigflag;
}
2017-01-28 13:41:01 +00:00
return state;
}
void WIFI_Connect()
2017-01-28 13:41:01 +00:00
{
WiFi.persistent(false); // Solve possible wifi init errors
_wifistatus = 0;
_wifiretry = WIFI_RETRY_SEC;
_wificounter = 1;
}
#ifdef USE_DISCOVERY
/*********************************************************************************************\
* mDNS
\*********************************************************************************************/
#ifdef MQTT_HOST_DISCOVERY
boolean mdns_discoverMQTTServer()
{
char log[LOGSZ];
char ip_str[20];
2017-01-28 13:41:01 +00:00
int n;
if (!mDNSbegun) {
return false;
}
2017-01-28 13:41:01 +00:00
n = MDNS.queryService("mqtt", "tcp"); // Search for mqtt service
snprintf_P(log, sizeof(log), PSTR("mDNS: Query done with %d mqtt services found"), n);
addLog(LOG_LEVEL_INFO, log);
if (n > 0) {
// Note: current strategy is to get the first MQTT service (even when many are found)
IPtoCharArray(MDNS.IP(0), ip_str, 20);
snprintf_P(log, sizeof(log), PSTR("mDNS: Service found on %s ip %s port %d"),
MDNS.hostname(0).c_str(), ip_str, MDNS.port(0));
addLog(LOG_LEVEL_INFO, log);
strlcpy(sysCfg.mqtt_host, ip_str, sizeof(sysCfg.mqtt_host));
sysCfg.mqtt_port = MDNS.port(0);
}
return n > 0;
}
#endif // MQTT_HOST_DISCOVERY
void IPtoCharArray(IPAddress address, char *ip_str, size_t size)
{
String str = String(address[0]);
str += ".";
str += String(address[1]);
str += ".";
str += String(address[2]);
str += ".";
str += String(address[3]);
str.toCharArray(ip_str, size);
}
#endif // USE_DISCOVERY
/*********************************************************************************************\
* Basic I2C routines
\*********************************************************************************************/
#ifdef USE_I2C
#define I2C_RETRY_COUNTER 3
int32_t i2c_read(uint8_t addr, uint8_t reg, uint8_t size)
{
byte x = 0;
int32_t data = 0;
do {
Wire.beginTransmission(addr); // start transmission to device
Wire.write(reg); // sends register address to read from
if (0 == Wire.endTransmission(false)) { // Try to become I2C Master, send data and collect bytes, keep master status for next request...
2017-01-28 13:41:01 +00:00
Wire.requestFrom((int)addr, (int)size); // send data n-bytes read
if (Wire.available() == size) {
2017-01-28 13:41:01 +00:00
for(byte i = 0; i < size; i++) {
data <<= 8;
data |= Wire.read(); // receive DATA
}
}
2017-01-28 13:41:01 +00:00
}
x++;
} while (Wire.endTransmission(true) != 0 && x <= I2C_RETRY_COUNTER); // end transmission
return data;
}
uint8_t i2c_read8(uint8_t addr, uint8_t reg)
{
return i2c_read(addr, reg, 1);
}
uint16_t i2c_read16(uint8_t addr, uint8_t reg)
{
return i2c_read(addr, reg, 2);
}
int16_t i2c_readS16(uint8_t addr, uint8_t reg)
{
return (int16_t)i2c_read(addr, reg, 2);
}
uint16_t i2c_read16_LE(uint8_t addr, uint8_t reg)
{
uint16_t temp = i2c_read(addr, reg, 2);
return (temp >> 8) | (temp << 8);
}
int16_t i2c_readS16_LE(uint8_t addr, uint8_t reg)
{
return (int16_t)i2c_read16_LE(addr, reg);
}
int32_t i2c_read24(uint8_t addr, uint8_t reg)
{
return i2c_read(addr, reg, 3);
}
void i2c_write8(uint8_t addr, uint8_t reg, uint8_t val)
{
byte x = I2C_RETRY_COUNTER;
do {
Wire.beginTransmission((uint8_t)addr); // start transmission to device
Wire.write(reg); // sends register address to read from
Wire.write(val); // write data
x--;
} while (Wire.endTransmission(true) != 0 && x != 0); // end transmission
}
void i2c_scan(char *devs, unsigned int devs_len)
{
byte error;
byte address;
byte any = 0;
2017-01-28 13:41:01 +00:00
char tstr[10];
snprintf_P(devs, devs_len, PSTR("{\"I2Cscan\":\"Device(s) found at"));
for (address = 1; address <= 127; address++) {
Wire.beginTransmission(address);
error = Wire.endTransmission();
if (0 == error) {
2017-01-28 13:41:01 +00:00
snprintf_P(tstr, sizeof(tstr), PSTR(" 0x%2x"), address);
strncat(devs, tstr, devs_len);
any = 1;
}
else if (4 == error) {
snprintf_P(devs, devs_len, PSTR("{\"I2Cscan\":\"Unknown error at 0x%2x\"}"), address);
}
2017-01-28 13:41:01 +00:00
}
if (any) {
strncat(devs, "\"}", devs_len);
} else {
snprintf_P(devs, devs_len, PSTR("{\"I2Cscan\":\"No devices found\"}"));
}
}
#endif // USE_I2C
/*********************************************************************************************\
* Real Time Clock
*
* Sources: Time by Michael Margolis and Paul Stoffregen (https://github.com/PaulStoffregen/Time)
* Timezone by Jack Christensen (https://github.com/JChristensen/Timezone)
\*********************************************************************************************/
extern "C" {
#include "sntp.h"
}
#define SECS_PER_MIN ((uint32_t)(60UL))
#define SECS_PER_HOUR ((uint32_t)(3600UL))
#define SECS_PER_DAY ((uint32_t)(SECS_PER_HOUR * 24UL))
#define LEAP_YEAR(Y) (((1970+Y)>0) && !((1970+Y)%4) && (((1970+Y)%100) || !((1970+Y)%400)))
Ticker tickerRTC;
static const uint8_t monthDays[] = { 31, 28, 31, 30, 31, 30, 31, 31, 30, 31, 30, 31 }; // API starts months from 1, this array starts from 0
static const char monthNames[] = "JanFebMarAprMayJunJulAugSepOctNovDec";
2017-01-28 13:41:01 +00:00
uint32_t utctime = 0;
uint32_t loctime = 0;
uint32_t dsttime = 0;
uint32_t stdtime = 0;
uint32_t ntptime = 0;
uint32_t midnight = 1451602800;
2017-01-28 13:41:01 +00:00
String getBuildDateTime()
{
// "2017-03-07T11:08:02"
char bdt[21];
char *str;
char *p;
char *smonth;
char mdate[] = __DATE__; // "Mar 7 2017"
int month;
int day;
int year;
// sscanf(mdate, "%s %d %d", bdt, &day, &year); // Not implemented in 2.3.0 and probably too many code
byte i = 0;
for (str = strtok_r(mdate, " ", &p); str && i < 3; str = strtok_r(NULL, " ", &p)) {
switch (i++) {
case 0: // Month
smonth = str;
break;
case 1: // Day
day = atoi(str);
break;
case 2: // Year
year = atoi(str);
}
}
month = (strstr(monthNames, smonth) -monthNames) /3 +1;
snprintf_P(bdt, sizeof(bdt), PSTR("%d-%02d-%02dT%s"), year, month, day, __TIME__);
return String(bdt);
}
String getDateTime()
{
// "2017-03-07T11:08:02"
char dt[21];
snprintf_P(dt, sizeof(dt), PSTR("%04d-%02d-%02dT%02d:%02d:%02d"),
rtcTime.Year, rtcTime.Month, rtcTime.Day, rtcTime.Hour, rtcTime.Minute, rtcTime.Second);
return String(dt);
}
2017-01-28 13:41:01 +00:00
void breakTime(uint32_t timeInput, TIME_T &tm)
{
// break the given timeInput into time components
// this is a more compact version of the C library localtime function
// note that year is offset from 1970 !!!
uint8_t year;
uint8_t month;
uint8_t monthLength;
2017-01-28 13:41:01 +00:00
uint32_t time;
unsigned long days;
time = timeInput;
tm.Second = time % 60;
time /= 60; // now it is minutes
tm.Minute = time % 60;
time /= 60; // now it is hours
tm.Hour = time % 24;
time /= 24; // now it is days
tm.Wday = ((time + 4) % 7) + 1; // Sunday is day 1
year = 0;
days = 0;
while((unsigned)(days += (LEAP_YEAR(year) ? 366 : 365)) <= time) {
year++;
}
tm.Year = year; // year is offset from 1970
days -= LEAP_YEAR(year) ? 366 : 365;
time -= days; // now it is days in this year, starting at 0
tm.DayOfYear = time;
days = 0;
month = 0;
monthLength = 0;
for (month = 0; month < 12; month++) {
if (1 == month) { // february
2017-01-28 13:41:01 +00:00
if (LEAP_YEAR(year)) {
monthLength = 29;
} else {
monthLength = 28;
}
} else {
monthLength = monthDays[month];
}
if (time >= monthLength) {
time -= monthLength;
} else {
break;
}
}
strlcpy(tm.MonthName, monthNames + (month *3), 4);
tm.Month = month + 1; // jan is month 1
tm.Day = time + 1; // day of month
tm.Valid = (timeInput > 1451602800); // 2016-01-01
}
uint32_t makeTime(TIME_T &tm)
{
// assemble time elements into time_t
// note year argument is offset from 1970
int i;
uint32_t seconds;
// seconds from 1970 till 1 jan 00:00:00 of the given year
seconds = tm.Year * (SECS_PER_DAY * 365);
for (i = 0; i < tm.Year; i++) {
if (LEAP_YEAR(i)) {
seconds += SECS_PER_DAY; // add extra days for leap years
}
}
// add days for this year, months start from 1
for (i = 1; i < tm.Month; i++) {
if ((2 == i) && LEAP_YEAR(tm.Year)) {
2017-01-28 13:41:01 +00:00
seconds += SECS_PER_DAY * 29;
} else {
seconds += SECS_PER_DAY * monthDays[i-1]; // monthDay array starts from 0
}
}
seconds+= (tm.Day - 1) * SECS_PER_DAY;
seconds+= tm.Hour * SECS_PER_HOUR;
seconds+= tm.Minute * SECS_PER_MIN;
seconds+= tm.Second;
return seconds;
}
uint32_t toTime_t(TimeChangeRule r, int yr)
{
TIME_T tm;
uint32_t t;
uint8_t m;
uint8_t w; // temp copies of r.month and r.week
2017-01-28 13:41:01 +00:00
m = r.month;
w = r.week;
if (0 == w) { // Last week = 0
if (++m > 12) { // for "Last", go to the next month
m = 1;
yr++;
}
w = 1; // and treat as first week of next month, subtract 7 days later
2017-01-28 13:41:01 +00:00
}
tm.Hour = r.hour;
tm.Minute = 0;
tm.Second = 0;
tm.Day = 1;
tm.Month = m;
tm.Year = yr - 1970;
t = makeTime(tm); // First day of the month, or first day of next month for "Last" rules
breakTime(t, tm);
t += (7 * (w - 1) + (r.dow - tm.Wday + 7) % 7) * SECS_PER_DAY;
if (0 == r.week) {
t -= 7 * SECS_PER_DAY; //back up a week if this is a "Last" rule
}
2017-01-28 13:41:01 +00:00
return t;
}
String rtc_time(int type)
{
char stime[25]; // Skip newline
uint32_t time = utctime;
if (1 == type) time = loctime;
if (2 == type) time = dsttime;
if (3 == type) time = stdtime;
2017-01-28 13:41:01 +00:00
snprintf_P(stime, sizeof(stime), PSTR("%s"), sntp_get_real_time(time));
return String(stime);
}
uint32_t rtc_loctime()
{
return loctime;
}
uint32_t rtc_midnight()
{
return midnight;
}
void rtc_second()
{
char log[LOGSZ];
byte ntpsync;
uint32_t stdoffset;
uint32_t dstoffset;
2017-01-28 13:41:01 +00:00
TIME_T tmpTime;
ntpsync = 0;
if (rtcTime.Year < 2016) {
if (WL_CONNECTED == WiFi.status()) {
2017-01-28 13:41:01 +00:00
ntpsync = 1; // Initial NTP sync
}
} else {
if ((1 == rtcTime.Minute) && (1 == rtcTime.Second)) {
2017-01-28 13:41:01 +00:00
ntpsync = 1; // Hourly NTP sync at xx:01:01
}
}
if (ntpsync) {
ntptime = sntp_get_current_timestamp();
if (ntptime) {
utctime = ntptime;
breakTime(utctime, tmpTime);
rtcTime.Year = tmpTime.Year + 1970;
dsttime = toTime_t(myDST, rtcTime.Year);
stdtime = toTime_t(mySTD, rtcTime.Year);
snprintf_P(log, sizeof(log), PSTR("RTC: (UTC) %s"), rtc_time(0).c_str());
addLog(LOG_LEVEL_DEBUG, log);
snprintf_P(log, sizeof(log), PSTR("RTC: (DST) %s"), rtc_time(2).c_str());
addLog(LOG_LEVEL_DEBUG, log);
snprintf_P(log, sizeof(log), PSTR("RTC: (STD) %s"), rtc_time(3).c_str());
addLog(LOG_LEVEL_DEBUG, log);
}
}
utctime++;
loctime = utctime;
if (loctime > 1451602800) { // 2016-01-01
if (99 == sysCfg.timezone) {
2017-01-28 13:41:01 +00:00
dstoffset = myDST.offset * SECS_PER_MIN;
stdoffset = mySTD.offset * SECS_PER_MIN;
if ((utctime >= (dsttime - stdoffset)) && (utctime < (stdtime - dstoffset))) {
loctime += dstoffset; // Daylight Saving Time
} else {
loctime += stdoffset; // Standard Time
}
} else {
loctime += sysCfg.timezone * SECS_PER_HOUR;
}
}
breakTime(loctime, rtcTime);
if (!rtcTime.Hour && !rtcTime.Minute && !rtcTime.Second && rtcTime.Valid) {
midnight = loctime;
}
rtcTime.Year += 1970;
}
void rtc_init()
2017-01-28 13:41:01 +00:00
{
sntp_setservername(0, sysCfg.ntp_server[0]);
sntp_setservername(1, sysCfg.ntp_server[1]);
sntp_setservername(2, sysCfg.ntp_server[2]);
2017-01-28 13:41:01 +00:00
sntp_stop();
sntp_set_timezone(0); // UTC time
sntp_init();
utctime = 0;
breakTime(utctime, rtcTime);
tickerRTC.attach(1, rtc_second);
}
/*********************************************************************************************\
* Miscellaneous
\*********************************************************************************************/
float convertTemp(float c)
{
float result = c;
if (!isnan(c) && sysCfg.flag.temperature_conversion) {
result = c * 1.8 + 32; // Fahrenheit
}
return result;
}
char tempUnit()
{
return (sysCfg.flag.temperature_conversion) ? 'F' : 'C';
}
2017-01-28 13:41:01 +00:00
/*********************************************************************************************\
* Syslog
\*********************************************************************************************/
void syslog(const char *message)
{
char str[TOPSZ + MESSZ];
2017-01-28 13:41:01 +00:00
if (portUDP.beginPacket(sysCfg.syslog_host, sysCfg.syslog_port)) {
snprintf_P(str, sizeof(str), PSTR("%s ESP-%s"), Hostname, message);
portUDP.write(str);
portUDP.endPacket();
} else {
syslog_level = 0;
syslog_timer = SYSLOG_TIMER;
snprintf_P(str, sizeof(str), PSTR("SYSL: Syslog Host not found so logging disabled for %d seconds. Consider syslog 0"), SYSLOG_TIMER);
addLog(LOG_LEVEL_INFO, str);
}
}
void addLog(byte loglevel, const char *line)
{
char mxtime[9];
snprintf_P(mxtime, sizeof(mxtime), PSTR("%02d:%02d:%02d"), rtcTime.Hour, rtcTime.Minute, rtcTime.Second);
if (loglevel <= seriallog_level) Serial.printf("%s %s\n", mxtime, line);
#ifdef USE_WEBSERVER
if (sysCfg.webserver && (loglevel <= sysCfg.weblog_level)) {
2017-01-28 13:41:01 +00:00
Log[logidx] = String(mxtime) + " " + String(line);
logidx++;
if (logidx > MAX_LOG_LINES -1) {
logidx = 0;
}
2017-01-28 13:41:01 +00:00
}
#endif // USE_WEBSERVER
if ((WL_CONNECTED == WiFi.status()) && (loglevel <= syslog_level)) {
syslog(line);
}
2017-01-28 13:41:01 +00:00
}
void addLog_P(byte loglevel, const char *formatP)
{
char mess[LOGSZ]; // was MESSZ
2017-01-28 13:41:01 +00:00
snprintf_P(mess, sizeof(mess), formatP);
addLog(loglevel, mess);
}
/*********************************************************************************************\
*
\*********************************************************************************************/