Tasmota/tasmota/xdrv_28_pcf8574.ino

261 lines
9.4 KiB
Arduino
Raw Normal View History

/*
xdrv_28_pcf8574.ino - PCF8574 I2C support for Tasmota
2021-01-01 12:44:04 +00:00
Copyright (C) 2021 Stefan Bode
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_I2C
#ifdef USE_PCF8574
/*********************************************************************************************\
* PCF8574 - I2C IO Expander
*
* I2C Address: PCF8574 = 0x20 .. 0x27 (0x27 is not supported),
* PCF8574A = 0x39 .. 0x3F (0x38 is not supported)
\*********************************************************************************************/
#define XDRV_28 28
#define XI2C_02 2 // See I2CDEVICES.md
#define PCF8574_ADDR1 0x20 // PCF8574
#define PCF8574_ADDR2 0x38 // PCF8574A
struct PCF8574 {
int error;
uint8_t pin[64];
uint8_t address[MAX_PCF8574];
uint8_t pin_mask[MAX_PCF8574] = { 0 };
uint8_t max_connected_ports = 0; // Max numbers of devices comming from PCF8574 modules
uint8_t max_devices = 0; // Max numbers of PCF8574 modules
char stype[9];
2019-11-11 16:32:44 +00:00
bool type = false;
} Pcf8574;
void Pcf8574SwitchRelay(void)
{
2020-10-30 11:29:48 +00:00
for (uint32_t i = 0; i < TasmotaGlobal.devices_present; i++) {
uint8_t relay_state = bitRead(XdrvMailbox.index, i);
//AddLog_P(LOG_LEVEL_DEBUG, PSTR("PCF: Pcf8574.max_devices %d requested pin %d"), Pcf8574.max_devices,Pcf8574.pin[i]);
if (Pcf8574.max_devices > 0 && Pcf8574.pin[i] < 99) {
uint8_t board = Pcf8574.pin[i]>>3;
uint8_t oldpinmask = Pcf8574.pin_mask[board];
2020-10-28 18:03:39 +00:00
uint8_t _val = bitRead(TasmotaGlobal.rel_inverted, i) ? !relay_state : relay_state;
//AddLog_P(LOG_LEVEL_DEBUG, PSTR("PCF: Pcf8574SwitchRelay %d on pin %d"), i,state);
if (_val) {
Pcf8574.pin_mask[board] |= _val << (Pcf8574.pin[i]&0x7);
} else {
Pcf8574.pin_mask[board] &= ~(1 << (Pcf8574.pin[i]&0x7));
}
if (oldpinmask != Pcf8574.pin_mask[board]) {
Wire.beginTransmission(Pcf8574.address[board]);
Wire.write(Pcf8574.pin_mask[board]);
Pcf8574.error = Wire.endTransmission();
}
2020-10-28 18:03:39 +00:00
//pcf8574.write(Pcf8574.pin[i]&0x7, TasmotaGlobal.rel_inverted[i] ? !state : state);
}
}
}
2019-11-20 19:53:12 +00:00
void Pcf8574Init(void)
{
uint8_t pcf8574_address = PCF8574_ADDR1;
while ((Pcf8574.max_devices < MAX_PCF8574) && (pcf8574_address < PCF8574_ADDR2 +8)) {
#ifdef USE_MCP230xx_ADDR
if (USE_MCP230xx_ADDR == pcf8574_address) {
AddLog_P(LOG_LEVEL_INFO, PSTR("PCF: Address 0x%02x reserved for MCP320xx skipped"), pcf8574_address);
pcf8574_address++;
if ((PCF8574_ADDR1 +7) == pcf8574_address) { // Support I2C addresses 0x20 to 0x26 and 0x39 to 0x3F
pcf8574_address = PCF8574_ADDR2 +1;
}
}
#endif
// AddLog_P(LOG_LEVEL_DEBUG, PSTR("PCF: Probing addr: 0x%x for PCF8574"), pcf8574_address);
2019-11-06 16:48:38 +00:00
if (I2cSetDevice(pcf8574_address)) {
Pcf8574.type = true;
Pcf8574.address[Pcf8574.max_devices] = pcf8574_address;
Pcf8574.max_devices++;
strcpy(Pcf8574.stype, "PCF8574");
if (pcf8574_address >= PCF8574_ADDR2) {
strcpy(Pcf8574.stype, "PCF8574A");
}
2019-11-09 17:34:22 +00:00
I2cSetActiveFound(pcf8574_address, Pcf8574.stype);
}
pcf8574_address++;
if ((PCF8574_ADDR1 +7) == pcf8574_address) { // Support I2C addresses 0x20 to 0x26 and 0x39 to 0x3F
pcf8574_address = PCF8574_ADDR2 +1;
}
}
if (Pcf8574.type) {
for (uint32_t i = 0; i < sizeof(Pcf8574.pin); i++) {
Pcf8574.pin[i] = 99;
}
2020-10-30 11:29:48 +00:00
TasmotaGlobal.devices_present = TasmotaGlobal.devices_present - Pcf8574.max_connected_ports; // reset no of devices to avoid duplicate ports on duplicate init.
Pcf8574.max_connected_ports = 0; // reset no of devices to avoid duplicate ports on duplicate init.
for (uint32_t idx = 0; idx < Pcf8574.max_devices; idx++) { // suport up to 8 boards PCF8574
AddLog_P(LOG_LEVEL_DEBUG, PSTR("PCF: Device %d config 0x%02x"), idx +1, Settings.pcf8574_config[idx]);
for (uint32_t i = 0; i < 8; i++) {
uint8_t _result = Settings.pcf8574_config[idx] >> i &1;
//AddLog_P(LOG_LEVEL_DEBUG, PSTR("PCF: I2C shift i %d: %d. Powerstate: %d, TasmotaGlobal.devices_present: %d"), i,_result, Settings.power>>i&1, TasmotaGlobal.devices_present);
if (_result > 0) {
2020-10-30 11:29:48 +00:00
Pcf8574.pin[TasmotaGlobal.devices_present] = i + 8 * idx;
bitWrite(TasmotaGlobal.rel_inverted, TasmotaGlobal.devices_present, Settings.flag3.pcf8574_ports_inverted); // SetOption81 - Invert all ports on PCF8574 devices
TasmotaGlobal.devices_present++;
Pcf8574.max_connected_ports++;
}
}
}
AddLog_P(LOG_LEVEL_INFO, PSTR("PCF: Total devices %d, PCF8574 output ports %d"), Pcf8574.max_devices, Pcf8574.max_connected_ports);
}
}
/*********************************************************************************************\
* Presentation
\*********************************************************************************************/
#ifdef USE_WEBSERVER
#define WEB_HANDLE_PCF8574 "pcf"
const char HTTP_BTN_MENU_PCF8574[] PROGMEM =
"<p><form action='" WEB_HANDLE_PCF8574 "' method='get'><button>" D_CONFIGURE_PCF8574 "</button></form></p>";
const char HTTP_FORM_I2C_PCF8574_1[] PROGMEM =
"<fieldset><legend><b>&nbsp;" D_PCF8574_PARAMETERS "&nbsp;</b></legend>"
"<form method='get' action='" WEB_HANDLE_PCF8574 "'>"
"<p><label><input id='b1' name='b1' type='checkbox'%s><b>" D_INVERT_PORTS "</b></label></p><hr/>";
const char HTTP_FORM_I2C_PCF8574_2[] PROGMEM =
"<tr><td><b>" D_DEVICE " %d " D_PORT " %d</b></td><td style='width:100px'><select id='i2cs%d' name='i2cs%d'>"
"<option%s value='0'>" D_DEVICE_INPUT "</option>"
"<option%s value='1'>" D_DEVICE_OUTPUT "</option>"
"</select></td></tr>";
void HandlePcf8574(void)
{
if (!HttpCheckPriviledgedAccess()) { return; }
AddLog_P(LOG_LEVEL_DEBUG, PSTR(D_LOG_HTTP D_CONFIGURE_PCF8574));
if (Webserver->hasArg("save")) {
Pcf8574SaveSettings();
WebRestart(1);
return;
}
WSContentStart_P(D_CONFIGURE_PCF8574);
WSContentSendStyle();
2021-01-13 07:27:40 +00:00
WSContentSend_P(HTTP_FORM_I2C_PCF8574_1, (Settings.flag3.pcf8574_ports_inverted) ? PSTR(" checked") : ""); // SetOption81 - Invert all ports on PCF8574 devices
WSContentSend_P(HTTP_TABLE100);
for (uint32_t idx = 0; idx < Pcf8574.max_devices; idx++) {
for (uint32_t idx2 = 0; idx2 < 8; idx2++) { // 8 ports on PCF8574
uint8_t helper = 1 << idx2;
WSContentSend_P(HTTP_FORM_I2C_PCF8574_2,
idx +1, idx2,
idx2 + 8*idx,
idx2 + 8*idx,
2021-01-12 18:31:15 +00:00
((helper & Settings.pcf8574_config[idx]) >> idx2 == 0) ? PSTR(" selected ") : " ",
((helper & Settings.pcf8574_config[idx]) >> idx2 == 1) ? PSTR(" selected ") : " "
);
}
}
WSContentSend_P(PSTR("</table>"));
WSContentSend_P(HTTP_FORM_END);
WSContentSpaceButton(BUTTON_CONFIGURATION);
WSContentStop();
}
2019-11-20 19:53:12 +00:00
void Pcf8574SaveSettings(void)
{
char stemp[7];
char tmp[100];
//AddLog_P(LOG_LEVEL_DEBUG, PSTR("PCF: Start working on Save arguements: inverted:%d")), Webserver->hasArg("b1");
Settings.flag3.pcf8574_ports_inverted = Webserver->hasArg("b1"); // SetOption81 - Invert all ports on PCF8574 devices
for (byte idx = 0; idx < Pcf8574.max_devices; idx++) {
byte count=0;
byte n = Settings.pcf8574_config[idx];
while(n!=0) {
n = n&(n-1);
count++;
}
2020-10-30 11:29:48 +00:00
if (count <= TasmotaGlobal.devices_present) {
TasmotaGlobal.devices_present = TasmotaGlobal.devices_present - count;
}
for (byte i = 0; i < 8; i++) {
snprintf_P(stemp, sizeof(stemp), PSTR("i2cs%d"), i+8*idx);
WebGetArg(stemp, tmp, sizeof(tmp));
byte _value = (!strlen(tmp)) ? 0 : atoi(tmp);
if (_value) {
Settings.pcf8574_config[idx] = Settings.pcf8574_config[idx] | 1 << i;
2020-10-30 11:29:48 +00:00
TasmotaGlobal.devices_present++;
Pcf8574.max_connected_ports++;
} else {
Settings.pcf8574_config[idx] = Settings.pcf8574_config[idx] & ~(1 << i );
}
}
//Settings.pcf8574_config[0] = (!strlen(webServer->arg("i2cs0").c_str())) ? 0 : atoi(webServer->arg("i2cs0").c_str());
//AddLog_P(LOG_LEVEL_INFO, PSTR("PCF: I2C Board: %d, Config: %2x")), idx, Settings.pcf8574_config[idx];
}
}
#endif // USE_WEBSERVER
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
bool Xdrv28(uint8_t function)
{
2019-11-11 16:32:44 +00:00
if (!I2cEnabled(XI2C_02)) { return false; }
bool result = false;
2019-11-11 16:32:44 +00:00
if (FUNC_PRE_INIT == function) {
Pcf8574Init();
}
else if (Pcf8574.type) {
switch (function) {
case FUNC_SET_POWER:
Pcf8574SwitchRelay();
break;
#ifdef USE_WEBSERVER
2019-11-11 16:32:44 +00:00
case FUNC_WEB_ADD_BUTTON:
WSContentSend_P(HTTP_BTN_MENU_PCF8574);
break;
case FUNC_WEB_ADD_HANDLER:
2020-10-20 17:56:18 +01:00
WebServer_on(PSTR("/" WEB_HANDLE_PCF8574), HandlePcf8574);
2019-11-11 16:32:44 +00:00
break;
#endif // USE_WEBSERVER
2019-11-11 16:32:44 +00:00
}
}
return result;
}
#endif // USE_PCF8574
#endif // USE_I2C