2019-12-17 02:09:34 +00:00
/*
pt - PT . h - localization for Portuguese - Portugal for Tasmota
2021-01-01 12:44:04 +00:00
Copyright ( C ) 2021 Paulo Paiva
2019-12-17 02:09:34 +00:00
This program is free software : you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation , either version 3 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
# ifndef _LANGUAGE_PT_PT_H_
# define _LANGUAGE_PT_PT_H_
/*************************** ATTENTION *******************************\
*
* Due to memory constraints only UTF - 8 is supported .
* To save code space keep text as short as possible .
* Time and Date provided by SDK can not be localized ( yet ) .
* Use online command StateText to translate ON , OFF , HOLD and TOGGLE .
* Use online command Prefix to translate cmnd , stat and tele .
*
* Updated until v7 .0 .0 .1
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
# define LANGUAGE_LCID 2070
// HTML (ISO 639-1) Language Code
# define D_HTML_LANGUAGE "pt"
// "2017-03-07T11:08:02" - ISO8601:2004
# define D_YEAR_MONTH_SEPARATOR "-"
# define D_MONTH_DAY_SEPARATOR "-"
# define D_DATE_TIME_SEPARATOR "T"
# define D_HOUR_MINUTE_SEPARATOR ":"
# define D_MINUTE_SECOND_SEPARATOR ":"
# define D_DAY3LIST "DomSegTerQuaQuiSexSab"
# define D_MONTH3LIST "JanFevMarAbrMaiJunJulAgoSepOutNovDez"
// Non JSON decimal separator
# define D_DECIMAL_SEPARATOR "."
// Common
# define D_ADMIN "Admin"
# define D_AIR_QUALITY "Qualidade do Ar"
# define D_AP "AP" // Ponto de Acesso
# define D_AS "como"
# define D_AUTO "AUTO"
2020-06-29 10:53:31 +01:00
# define D_BATT "Batt" // Short for Battery
2019-12-17 02:09:34 +00:00
# define D_BLINK "Piscar"
# define D_BLINKOFF "Piscar Desligado"
# define D_BOOT_COUNT "Contagem de Inicialização"
# define D_BRIGHTLIGHT "Brilho"
# define D_BSSID "BSSId"
# define D_BUTTON "Botão"
# define D_BY "por" // Write by me
# define D_BYTES "Bytes"
# define D_CELSIUS "Celsius"
# define D_CHANNEL "Canal"
# define D_CO2 "Dioxido de Carbono"
# define D_CODE "Código" // Button code
# define D_COLDLIGHT "Luz Fria"
# define D_COMMAND "Comando"
# define D_CONNECTED "Ligado"
# define D_CORS_DOMAIN "CORS Domain"
# define D_COUNT "Contagem"
# define D_COUNTER "Contador"
2019-12-30 15:42:53 +00:00
# define D_CT_POWER "CT Power"
2019-12-17 02:09:34 +00:00
# define D_CURRENT "Corrente" // As in Voltage and Current
# define D_DATA "Dados"
# define D_DARKLIGHT "Luz Escura"
# define D_DEBUG "Depurar"
2020-03-16 15:52:22 +00:00
# define D_DEWPOINT "Dew point"
2019-12-17 02:09:34 +00:00
# define D_DISABLED "Disabilitado"
# define D_DISTANCE "Distância"
# define D_DNS_SERVER "Servidor DNS"
2020-11-02 08:26:35 +00:00
# define D_DO "Disolved Oxygen"
2019-12-17 02:09:34 +00:00
# define D_DONE "Concluído"
# define D_DST_TIME "DST"
2020-10-24 08:54:25 +01:00
# define D_EC "EC"
2019-12-30 17:44:08 +00:00
# define D_ECO2 "eCO₂"
2019-12-17 02:09:34 +00:00
# define D_EMULATION "Emulação"
# define D_ENABLED "Habilitado"
# define D_ERASE "Apagar"
# define D_ERROR "Erro"
# define D_FAHRENHEIT "Fahrenheit"
# define D_FAILED "Falha"
# define D_FALLBACK "Retornar"
# define D_FALLBACK_TOPIC "Tópico para retornar"
# define D_FALSE "Falso"
# define D_FILE "Ficheiro"
# define D_FLOW_RATE "Taxa de Fluxo"
# define D_FREE_MEMORY "Memoria Livre"
2020-05-12 13:19:10 +01:00
# define D_PSR_MAX_MEMORY "PS-RAM Memory"
# define D_PSR_FREE_MEMORY "PS-RAM free Memory"
2019-12-17 02:09:34 +00:00
# define D_FREQUENCY "Frequência"
# define D_GAS "Gás"
# define D_GATEWAY "Gateway"
# define D_GROUP "Grupo"
# define D_HOST "Anfitrião"
# define D_HOSTNAME "Nome Anfitrião"
# define D_HUMIDITY "Humidade"
# define D_ILLUMINANCE "Luminâcia"
# define D_IMMEDIATE "Immediato" // Button immediate
# define D_INDEX "Indíce"
# define D_INFO "Info"
# define D_INFRARED "Infravermelho"
# define D_INITIALIZED "Inicializado"
# define D_IP_ADDRESS "Endereço IP"
# define D_LIGHT "Luz"
# define D_LWT "LWT"
2020-06-29 10:53:31 +01:00
# define D_LQI "LQI" // Zigbee Link Quality Index
2019-12-17 02:09:34 +00:00
# define D_MODULE "Módulo"
2019-12-24 01:22:29 +00:00
# define D_MOISTURE "Moisture"
2019-12-17 02:09:34 +00:00
# define D_MQTT "MQTT"
# define D_MULTI_PRESS "multi-pressão"
# define D_NOISE "Ruído"
# define D_NONE "Nenhum"
2020-10-27 10:38:54 +00:00
# define D_O2 "Oxygen"
2019-12-17 02:09:34 +00:00
# define D_OFF "Off"
# define D_OFFLINE "Desconetado"
# define D_OK "Ok"
# define D_ON "On"
# define D_ONLINE "Conetado"
2020-10-18 13:43:40 +01:00
# define D_ORP "ORP"
2019-12-17 02:09:34 +00:00
# define D_PASSWORD "Palavra Chave"
2020-10-18 13:43:40 +01:00
# define D_PH "pH"
2019-12-17 02:09:34 +00:00
# define D_PORT "Porta"
# define D_POWER_FACTOR "Factor de Potência"
# define D_POWERUSAGE "Potência"
# define D_POWERUSAGE_ACTIVE "Potência Ativa"
# define D_POWERUSAGE_APPARENT "Potência Aparente"
# define D_POWERUSAGE_REACTIVE "Potência Reativa"
# define D_PRESSURE "Pressão"
# define D_PRESSUREATSEALEVEL "Pressão ao nível do Mar"
# define D_PROGRAM_FLASH_SIZE "Tamanho do Programa na Flash"
# define D_PROGRAM_SIZE "Tamanho do Programa"
# define D_PROJECT "Projeto"
# define D_RAIN "Chuva"
2020-01-23 22:17:15 +00:00
# define D_RANGE "Range"
2019-12-17 02:09:34 +00:00
# define D_RECEIVED "Recebido"
# define D_RESTART "Reiniciar"
# define D_RESTARTING "A reiniciar"
# define D_RESTART_REASON "Razão do reinicio"
# define D_RESTORE "Restauro"
# define D_RETAINED "Manter"
# define D_RULE "Regra"
# define D_SAVE "Guardar"
# define D_SENSOR "Sensor"
# define D_SSID "SSId"
# define D_START "Início"
# define D_STD_TIME "STD"
# define D_STOP "Parar"
# define D_SUBNET_MASK "Mascara sub rede"
# define D_SUBSCRIBE_TO "Subscrever"
# define D_UNSUBSCRIBE_FROM "Cancelar subscrição de"
# define D_SUCCESSFUL "Successo"
# define D_SUNRISE "Nascer do Sol"
# define D_SUNSET "Pôr do Sol"
# define D_TEMPERATURE "Temperatura"
# define D_TO "para"
# define D_TOGGLE "Pressionar"
# define D_TOPIC "Tópico"
# define D_TOTAL_USAGE "Uso total"
# define D_TRANSMIT "Transmitir"
# define D_TRUE "Verdadeiro"
# define D_TVOC "TVOC"
# define D_UPGRADE "Atualizar"
# define D_UPLOAD "Enviar"
# define D_UPTIME "Tempo de Atividade"
# define D_USER "Utilizador"
# define D_UTC_TIME "UTC"
# define D_UV_INDEX "Indíce UV"
# define D_UV_INDEX_1 "Baixo"
# define D_UV_INDEX_2 "Médio"
# define D_UV_INDEX_3 "Elevado"
# define D_UV_INDEX_4 "Perigoso"
# define D_UV_INDEX_5 "QueimaduraL1 / 2"
# define D_UV_INDEX_6 "QueimaduraL3"
# define D_UV_INDEX_7 "OoR"
# define D_UV_LEVEL "Nível UV"
# define D_UV_POWER "Poder UV"
# define D_VERSION "Versão"
# define D_VOLTAGE "Voltagem"
2020-11-01 09:28:43 +00:00
# define D_VOLUME "Volume"
2019-12-17 02:09:34 +00:00
# define D_WEIGHT "Peso"
# define D_WARMLIGHT "Luz Quente"
# define D_WEB_SERVER "Servidor WEB"
// tasmota.ino
# define D_WARNING_MINIMAL_VERSION "AVISO esta versão não supporta configurações persistentes"
# define D_LEVEL_10 "nível 1-0"
# define D_LEVEL_01 "nível 0-1"
# define D_SERIAL_LOGGING_DISABLED "Registro de porta série desabilitado"
# define D_SYSLOG_LOGGING_REENABLED "Registro do Syslog reativado"
# define D_SET_BAUDRATE_TO "Ajuste da velocidade para"
# define D_RECEIVED_TOPIC "Topico Recebido"
# define D_DATA_SIZE "Tamanho de Dados"
# define D_ANALOG_INPUT "Entrada Analógica"
// support.ino
# define D_OSWATCH "osWatch"
# define D_BLOCKED_LOOP "Loop Bloqueado"
# define D_WPS_FAILED_WITH_STATUS "WPSconfig FALHOU com estado"
# define D_ACTIVE_FOR_3_MINUTES "ativo por 3 minutos"
# define D_FAILED_TO_START "Falha ao iníciar"
# define D_PATCH_ISSUE_2186 "Questão 2186"
# define D_CONNECTING_TO_AP "Ligando ao AP"
# define D_IN_MODE "em modo"
# define D_CONNECT_FAILED_NO_IP_ADDRESS "A ligação falhou porque nenhum endereço IP foi recebido"
# define D_CONNECT_FAILED_AP_NOT_REACHED "A ligação falhou porque o AP não pode ser alcançado"
2020-04-07 15:31:22 +01:00
# define D_CONNECT_FAILED_WRONG_PASSWORD "A ligação falhou"
2019-12-17 02:09:34 +00:00
# define D_CONNECT_FAILED_AP_TIMEOUT "A ligação falhou porque o tempo excedeu"
# define D_ATTEMPTING_CONNECTION "A ligar..."
# define D_CHECKING_CONNECTION "A verificar ligação..."
# define D_QUERY_DONE "Consulta finalizada. Serviço MQTT não encontrado"
# define D_MQTT_SERVICE_FOUND "Serviço MQTT encontrado em"
# define D_FOUND_AT "encontrado em"
# define D_SYSLOG_HOST_NOT_FOUND "Anfitrião Syslog não encontrado"
// settings.ino
# define D_SAVED_TO_FLASH_AT "Guardado na flash em"
# define D_LOADED_FROM_FLASH_AT "Lido da flash em"
# define D_USE_DEFAULTS "Usar predefinições"
# define D_ERASED_SECTOR "Apagado setor"
// xdrv_02_webserver.ino
# define D_NOSCRIPT "Para utilizar o Tasmota, por favor ative o JavaScript"
# define D_MINIMAL_FIRMWARE_PLEASE_UPGRADE "Firmware MÍNIMO<br>Por favor atualize"
# define D_WEBSERVER_ACTIVE_ON "Servidor WEB ativo em"
# define D_WITH_IP_ADDRESS "com o endereço IP"
# define D_WEBSERVER_STOPPED "Servitor WEB parou"
# define D_FILE_NOT_FOUND "Ficheiro não encontrado"
# define D_REDIRECTED "Redirecionado para o portal ativo"
# define D_WIFIMANAGER_SET_ACCESSPOINT_AND_STATION "Wifimanager configura o Ponto de Acesso e mantem a Estação"
# define D_WIFIMANAGER_SET_ACCESSPOINT "Wifimanager configura o Ponto de Acesso"
# define D_TRYING_TO_CONNECT "A tentar ligar o dispositivo à rede"
# define D_RESTART_IN "Reinicia em"
# define D_SECONDS "segundos"
# define D_DEVICE_WILL_RESTART "O dispositivo irá reiniciar dentro de alguns segundos"
# define D_BUTTON_TOGGLE "Alternar"
# define D_CONFIGURATION "Configuração"
# define D_INFORMATION "Informação"
# define D_FIRMWARE_UPGRADE "Atualização de Firmware"
# define D_CONSOLE "Consola"
# define D_CONFIRM_RESTART "Confirmar o reinício"
# define D_CONFIGURE_MODULE "Configurar Módulo"
# define D_CONFIGURE_WIFI "Configurar WiFi"
# define D_CONFIGURE_MQTT "Configurar MQTT"
# define D_CONFIGURE_DOMOTICZ "Configurar Domoticz"
# define D_CONFIGURE_LOGGING "Configurar registro"
# define D_CONFIGURE_OTHER "Configurar outras opções"
# define D_CONFIRM_RESET_CONFIGURATION "Confirme o reinício da configuração"
# define D_RESET_CONFIGURATION "Apagar configuração"
# define D_BACKUP_CONFIGURATION "Guardar configuração"
# define D_RESTORE_CONFIGURATION "Repor configuração"
# define D_MAIN_MENU "Menu Principal"
# define D_MODULE_PARAMETERS "Parametros do Módulo"
# define D_MODULE_TYPE "Tipo de Módulo"
# define D_PULLUP_ENABLE "Sem pull-up de Botão / Interruptor"
# define D_ADC "ADC"
# define D_GPIO "GPIO"
# define D_SERIAL_IN "Entrada de porta série"
# define D_SERIAL_OUT "Saída de porta série"
# define D_WIFI_PARAMETERS "Parametros Wifi"
# define D_SCAN_FOR_WIFI_NETWORKS "Procurar redes Wifi"
# define D_SCAN_DONE "Pesquisa terminada"
# define D_NO_NETWORKS_FOUND "Sem redes encontradas"
# define D_REFRESH_TO_SCAN_AGAIN "Atualize para realizar nova pesquisa"
# define D_DUPLICATE_ACCESSPOINT "Duplicar ponto de Acesso"
# define D_SKIPPING_LOW_QUALITY "Ignorado devido a baixa qualidade do sinal"
# define D_RSSI "RSSI"
# define D_WEP "WEP"
# define D_WPA_PSK "WPA PSK"
# define D_WPA2_PSK "WPA2 PSK"
# define D_AP1_SSID "SSId do AP1"
# define D_AP1_PASSWORD "Palavra Chave do AP1"
# define D_AP2_SSID "SSId do AP2"
# define D_AP2_PASSWORD "Palavra Chave do AP2"
# define D_MQTT_PARAMETERS "Parametros MQTT"
# define D_CLIENT "Cliente"
# define D_FULL_TOPIC "Tópico completo"
# define D_LOGGING_PARAMETERS "Parametros para registro"
# define D_SERIAL_LOG_LEVEL "Nível de registro na porta série"
# define D_MQTT_LOG_LEVEL "Nível de registro MQTT"
# define D_WEB_LOG_LEVEL "Nível de registro WEB"
# define D_SYS_LOG_LEVEL "Nível de registro do Syslog"
# define D_MORE_DEBUG "Depurar mais"
# define D_SYSLOG_HOST "Anfitrião Syslog"
# define D_SYSLOG_PORT "Porta Syslog"
# define D_TELEMETRY_PERIOD "Período de Telemetria"
# define D_OTHER_PARAMETERS "Outros parametros"
# define D_TEMPLATE "Modelo"
# define D_ACTIVATE "Ativar"
2020-05-17 16:10:17 +01:00
# define D_DEVICE_NAME "Device Name"
2019-12-17 02:09:34 +00:00
# define D_WEB_ADMIN_PASSWORD "Palavra Chave do Admin WEB"
# define D_MQTT_ENABLE "MQTT habilitado"
2020-08-12 16:20:37 +01:00
# define D_MQTT_TLS_ENABLE "MQTT TLS"
2019-12-17 02:09:34 +00:00
# define D_FRIENDLY_NAME "Nome amigável"
# define D_BELKIN_WEMO "Belkin WeMo"
# define D_HUE_BRIDGE "Hue Bridge"
# define D_SINGLE_DEVICE "dispositivo único"
# define D_MULTI_DEVICE "dispositivo múltiplo"
# define D_CONFIGURE_TEMPLATE "Configurar Modelo"
# define D_TEMPLATE_PARAMETERS "Parametros do Modelo"
# define D_TEMPLATE_NAME "Nome do Modelo"
# define D_BASE_TYPE "Baseado em"
# define D_TEMPLATE_FLAGS "Opções"
# define D_SAVE_CONFIGURATION "Guardar configuração"
# define D_CONFIGURATION_SAVED "Configuração guardada"
# define D_CONFIGURATION_RESET "Reinicializar a configuração"
# define D_PROGRAM_VERSION "Versão do Programa"
# define D_BUILD_DATE_AND_TIME "Data e Hora de criação"
# define D_CORE_AND_SDK_VERSION "Versão Core / SDK"
# define D_FLASH_WRITE_COUNT "Contagem de gravação da flash"
# define D_MAC_ADDRESS "Endereço MAC"
# define D_MQTT_HOST "Servidor MQTT"
# define D_MQTT_PORT "Porta MQTT"
# define D_MQTT_CLIENT "Cliente MQTT"
# define D_MQTT_USER "Utilizador MQTT"
# define D_MQTT_TOPIC "Tópico MQTT"
# define D_MQTT_GROUP_TOPIC "Tópico MQTT de Grupo"
# define D_MQTT_FULL_TOPIC "Tópico MQTT Completo"
2020-08-12 16:20:37 +01:00
# define D_MQTT_NO_RETAIN "MQTT No Retain"
2019-12-17 02:09:34 +00:00
# define D_MDNS_DISCOVERY "Descobrir mDNS"
# define D_MDNS_ADVERTISE "Anunciar mDNS"
# define D_ESP_CHIP_ID "ID do chip ESP"
# define D_FLASH_CHIP_ID "ID do chip da Flash"
# define D_FLASH_CHIP_SIZE "Tamanho da Flash"
# define D_FREE_PROGRAM_SPACE "Espaço de Programa Livre"
# define D_UPGRADE_BY_WEBSERVER "Atualizar pelo servidor WEB"
# define D_OTA_URL "Url OTA"
# define D_START_UPGRADE "Iniciar atualização"
# define D_UPGRADE_BY_FILE_UPLOAD "Atualizar por envio de ficheiro"
# define D_UPLOAD_STARTED "Envio Iniciado"
# define D_UPGRADE_STARTED "Atualização Iniciada"
# define D_UPLOAD_DONE "Atualização Finalizada"
2020-09-01 12:05:46 +01:00
# define D_UPLOAD_TRANSFER "Upload transfer"
2020-08-08 12:18:39 +01:00
# define D_TRANSFER_STARTED "Transfer started"
2019-12-17 02:09:34 +00:00
# define D_UPLOAD_ERR_1 "Nenhum ficheiro selecionado"
# define D_UPLOAD_ERR_2 "Não existe espaço disponível"
2020-11-19 14:43:47 +00:00
# define D_UPLOAD_ERR_3 "Invalid file signature"
2019-12-17 02:09:34 +00:00
# define D_UPLOAD_ERR_4 "O tamanho do programa e maior do que o tamanho real da flash"
# define D_UPLOAD_ERR_5 "Comparação incorreta do buffer de upload"
# define D_UPLOAD_ERR_6 "Falha no envio. Habilitar registro 3"
# define D_UPLOAD_ERR_7 "Envio cancelado"
# define D_UPLOAD_ERR_8 "Ficheiro inválido"
# define D_UPLOAD_ERR_9 "Ficheiro demasiado grande"
# define D_UPLOAD_ERR_10 "Falha ao iniciar o chip de RF"
# define D_UPLOAD_ERR_11 "Falha ao apagar o chip de RF"
# define D_UPLOAD_ERR_12 "Falha ao escrever no chip de RF"
# define D_UPLOAD_ERR_13 "Falha ao descodificar o firmware RF"
2019-12-20 14:12:44 +00:00
# define D_UPLOAD_ERR_14 "Not compatible"
2019-12-17 02:09:34 +00:00
# define D_UPLOAD_ERROR_CODE "Código de erro do envio"
# define D_ENTER_COMMAND "Inserir comando"
# define D_ENABLE_WEBLOG_FOR_RESPONSE "Habilitar weblog 2 se resposta esperada"
# define D_NEED_USER_AND_PASSWORD "Necessário user=<nome utilizador>&password=<palavra chave>"
// xdrv_01_mqtt.ino
# define D_FINGERPRINT "Verifique a impressão digital TLS..."
# define D_TLS_CONNECT_FAILED_TO "TLS não conseguiu ligar"
# define D_RETRY_IN "Nova tentativa em"
# define D_VERIFIED "Verificado usando impressão digital"
# define D_INSECURE "Ligação insegura devido à impressão digital inválida"
# define D_CONNECT_FAILED_TO "A ligação falhou ao"
// xplg_wemohue.ino
# define D_MULTICAST_DISABLED "Multicast desabilitado"
# define D_MULTICAST_REJOINED "Multicast (re)ingressado"
# define D_MULTICAST_JOIN_FAILED "Multicast falha no reingresso"
# define D_FAILED_TO_SEND_RESPONSE "Falha no envio de reposta"
# define D_WEMO "WeMo"
# define D_WEMO_BASIC_EVENT "WeMo evento básico"
# define D_WEMO_EVENT_SERVICE "WeMo evento de serviço"
# define D_WEMO_META_SERVICE "WeMo serviço meta"
# define D_WEMO_SETUP "WeMo configuração"
# define D_RESPONSE_SENT "Resposta enviada"
# define D_HUE "Hue"
# define D_HUE_BRIDGE_SETUP "Configuração do Hue"
# define D_HUE_API_NOT_IMPLEMENTED "API Hue nao implementada"
# define D_HUE_API "API Hue"
# define D_HUE_POST_ARGS "Argumentos de POST HUE"
# define D_3_RESPONSE_PACKETS_SENT "3 pacotes de resposta enviados"
// xdrv_07_domoticz.ino
# define D_DOMOTICZ_PARAMETERS "Parametros Domoticz"
# define D_DOMOTICZ_IDX "Idx"
# define D_DOMOTICZ_KEY_IDX "Chave idx"
# define D_DOMOTICZ_SWITCH_IDX "Interruptor idx"
# define D_DOMOTICZ_SENSOR_IDX "Sensor idx"
# define D_DOMOTICZ_TEMP "Temp"
# define D_DOMOTICZ_TEMP_HUM "Temp,Hum"
# define D_DOMOTICZ_TEMP_HUM_BARO "Temp,Hum,Baro"
# define D_DOMOTICZ_POWER_ENERGY "Potência,Energia"
# define D_DOMOTICZ_ILLUMINANCE "Luminâcia"
# define D_DOMOTICZ_COUNT "Contagem / PM1"
# define D_DOMOTICZ_VOLTAGE "Voltagem / PM2.5"
# define D_DOMOTICZ_CURRENT "Corrente / PM10"
# define D_DOMOTICZ_AIRQUALITY "Qualidade do Ar"
# define D_DOMOTICZ_P1_SMART_METER "P1SmartMeter"
# define D_DOMOTICZ_UPDATE_TIMER "Temporizador de atualização"
// xdrv_09_timers.ino
# define D_CONFIGURE_TIMER "Configurar temporizador"
# define D_TIMER_PARAMETERS "Parâmetros do temporizador"
# define D_TIMER_ENABLE "Habilitar Temporizadores"
# define D_TIMER_ARM "Armar"
# define D_TIMER_TIME "Tempo"
# define D_TIMER_DAYS "Dias"
# define D_TIMER_REPEAT "Repetir"
# define D_TIMER_OUTPUT "Aaída"
# define D_TIMER_ACTION "Açao"
// xdrv_10_knx.ino
# define D_CONFIGURE_KNX "Configurar KNX"
# define D_KNX_PARAMETERS "Parâmetros KNX"
# define D_KNX_GENERAL_CONFIG "Geral"
# define D_KNX_PHYSICAL_ADDRESS "Endereço físico"
# define D_KNX_PHYSICAL_ADDRESS_NOTE "( Deve ser exclusivo na rede KNX )"
# define D_KNX_ENABLE "Habilitar KNX"
# define D_KNX_GROUP_ADDRESS_TO_WRITE "Dados para enviar para Endereços de Grupo"
# define D_ADD "Adicionar"
# define D_DELETE "Remover"
# define D_REPLY "Responder"
# define D_KNX_GROUP_ADDRESS_TO_READ "Endereços de Grupo de onde receber dados"
# define D_RECEIVED_FROM "Recebido de"
# define D_KNX_COMMAND_WRITE "Escrever"
# define D_KNX_COMMAND_READ "Ler"
# define D_KNX_COMMAND_OTHER "Outro"
# define D_SENT_TO "enviar para"
# define D_KNX_WARNING "O Endereço de Grupo ( 0 / 0 / 0 ) está reservado e não pode ser usado."
# define D_KNX_ENHANCEMENT "Melhoria de Comunicação"
# define D_KNX_TX_SLOT "KNX TX"
# define D_KNX_RX_SLOT "KNX RX"
2020-06-18 19:25:59 +01:00
# define D_KNX_TX_SCENE "KNX SCENE TX"
# define D_KNX_RX_SCENE "KNX SCENE RX"
2019-12-17 02:09:34 +00:00
2020-12-21 08:56:04 +00:00
// xdrv_23_zigbee
# define D_ZIGBEE_PERMITJOIN_ACTIVE "Devices allowed to join"
# define D_ZIGBEE_MAPPING_TITLE "Tasmota Zigbee Mapping"
# define D_ZIGBEE_NOT_STARTED "Zigbee not started"
# define D_ZIGBEE_MAPPING_IN_PROGRESS_SEC "Mapping in progress (%d s. remaining)"
# define D_ZIGBEE_MAPPING_NOT_PRESENT "No mapping"
# define D_ZIGBEE_MAP_REFRESH "Zigbee Map Refresh"
# define D_ZIGBEE_MAP "Zigbee Map"
# define D_ZIGBEE_PERMITJOIN "Zigbee Permit Join"
# define D_ZIGBEE_GENERATE_KEY "generating random Zigbee network key"
# define D_ZIGBEE_UNKNOWN_DEVICE "Unknown device"
# define D_ZIGBEE_UNKNOWN_ATTRIBUTE "Unknown attribute"
# define D_ZIGBEE_INVALID_PARAM "Invalid parameter"
# define D_ZIGBEE_MISSING_PARAM "Missing parameters"
# define D_ZIGBEE_UNKNWON_ATTRIBUTE "Unknown attribute name (ignored): %s"
# define D_ZIGBEE_TOO_MANY_CLUSTERS "No more than one cluster id per command"
# define D_ZIGBEE_WRONG_DELIMITER "Wrong delimiter for payload"
# define D_ZIGBEE_UNRECOGNIZED_COMMAND "Unrecognized zigbee command: %s"
# define D_ZIGBEE_TOO_MANY_COMMANDS "Only 1 command allowed (%d)"
# define D_ZIGBEE_NO_ATTRIBUTE "No attribute in list"
# define D_ZIGBEE_UNSUPPORTED_ATTRIBUTE_TYPE "Unsupported attribute type"
# define D_ZIGBEE_JSON_REQUIRED "Config requires JSON objects"
# define D_ZIGBEE_RESET_1_OR_2 "1 or 2 to reset"
# define D_ZIGBEE_EEPROM_FOUND_AT_ADDRESS "ZBBridge EEPROM found at address"
# define D_ZIGBEE_RANDOMIZING_ZBCONFIG "Randomizing Zigbee parameters, please check with 'ZbConfig'"
2019-12-17 02:09:34 +00:00
// xdrv_03_energy.ino
# define D_ENERGY_TODAY "Consumo energético de hoje"
# define D_ENERGY_YESTERDAY "Consumo energético de ontem"
# define D_ENERGY_TOTAL "Consumo energético total"
// xdrv_27_shutter.ino
# define D_OPEN "Abrir"
# define D_CLOSE "Fechar"
# define D_DOMOTICZ_SHUTTER "Estore"
// xdrv_28_pcf8574.ino
# define D_CONFIGURE_PCF8574 "Configurar PCF8574"
# define D_PCF8574_PARAMETERS "Parâmetros PCF8574"
# define D_INVERT_PORTS "Inverter Portas"
# define D_DEVICE "Dispositivo"
# define D_DEVICE_INPUT "Entrada"
# define D_DEVICE_OUTPUT "Saída"
// xsns_05_ds18b20.ino
# define D_SENSOR_BUSY "Sensor ocupado"
# define D_SENSOR_CRC_ERROR "Erro no CRC do sensor"
# define D_SENSORS_FOUND "Sensores encontrados"
// xsns_06_dht.ino
# define D_TIMEOUT_WAITING_FOR "Fim do tempo de espera"
# define D_START_SIGNAL_LOW "Sinal de início baixo"
# define D_START_SIGNAL_HIGH "Sinal de início elevado"
# define D_PULSE "pulso"
# define D_CHECKSUM_FAILURE "Falha na soma de verificação"
// xsns_07_sht1x.ino
# define D_SENSOR_DID_NOT_ACK_COMMAND "Sensor não aceitou o comando ACK"
# define D_SHT1X_FOUND "SHT1X encontrado"
// xsns_18_pms5003.ino
# define D_STANDARD_CONCENTRATION "CF-1 PM" // Standard Particle CF-1 Particle Matter
# define D_ENVIRONMENTAL_CONCENTRATION "PM" // Environmetal Particle Matter
# define D_PARTICALS_BEYOND "Partículas"
2020-05-06 20:30:36 +01:00
// xsns_27_apds9960.ino
# define D_GESTURE "Gesture"
# define D_COLOR_RED "Red"
# define D_COLOR_GREEN "Green"
# define D_COLOR_BLUE "Blue"
# define D_CCT "CCT"
# define D_PROXIMITY "Proximity"
2019-12-17 02:09:34 +00:00
// xsns_32_mpu6050.ino
# define D_AX_AXIS "Accel. X-Axis"
# define D_AY_AXIS "Accel. Y-Axis"
# define D_AZ_AXIS "Accel. Z-Axis"
# define D_GX_AXIS "Gyro X-Axis"
# define D_GY_AXIS "Gyro Y-Axis"
# define D_GZ_AXIS "Gyro Z-Axis"
// xsns_34_hx711.ino
# define D_HX_CAL_REMOVE "Remover peso"
# define D_HX_CAL_REFERENCE "Carregar peso de referência"
# define D_HX_CAL_DONE "Calibrado"
# define D_HX_CAL_FAIL "Falha na calibração"
# define D_RESET_HX711 "Reiniciar balança"
# define D_CONFIGURE_HX711 "Configurar balança"
# define D_HX711_PARAMETERS "Parâmetros da balança"
# define D_ITEM_WEIGHT "Peso do item"
# define D_REFERENCE_WEIGHT "Peso de referência"
# define D_CALIBRATE "Calibrar"
# define D_CALIBRATION "Calibração"
//xsns_35_tx20.ino
# define D_TX20_WIND_DIRECTION "Direção do vento"
# define D_TX20_WIND_SPEED "Velocidade do vento"
2020-02-24 16:25:03 +00:00
# define D_TX20_WIND_SPEED_MIN "Velocidade mínima do vento"
2019-12-17 02:09:34 +00:00
# define D_TX20_WIND_SPEED_MAX "Velocidade máxima do vento"
# define D_TX20_NORTH "N"
# define D_TX20_EAST "E"
# define D_TX20_SOUTH "S"
# define D_TX20_WEST "O"
2020-03-16 15:52:22 +00:00
//xsns_53_sml.ino
2020-03-15 12:04:07 +00:00
# define D_TPWRIN "Energia-Consumo"
# define D_TPWROUT "Energia-Geração"
# define D_TPWRCURR "Potência Ativa-Consumo / Geração"
# define D_TPWRCURR1 "Potência Ativa-Consumo F1"
# define D_TPWRCURR2 "Potência Ativa-Consumo F2"
# define D_TPWRCURR3 "Potência Ativa-Consumo F3"
2020-03-14 17:27:26 +00:00
# define D_Strom_L1 "Corrente F1"
# define D_Strom_L2 "Corrente F2"
# define D_Strom_L3 "Corrente F3"
# define D_Spannung_L1 "Tensão F1"
# define D_Spannung_L2 "Tensão F2"
# define D_Spannung_L3 "Tensão F3"
# define D_METERNR "Número_Contador"
# define D_METERSID "ID Serviço"
2020-03-16 15:52:22 +00:00
# define D_GasIN "Contagem"
2020-03-15 12:04:07 +00:00
# define D_H2oIN "Contagem"
2020-03-14 17:27:26 +00:00
# define D_StL1L2L3 "Corrente F1+F2+F3"
# define D_SpL1L2L3 "Tensão F1+F2+F3 / 3"
2019-12-17 02:09:34 +00:00
// tasmota_template.h - keep them as short as possible to be able to fit them in GUI drop down box
# define D_SENSOR_NONE "Nenhum"
# define D_SENSOR_USER "User"
2020-12-20 12:22:01 +00:00
# define D_SENSOR_OPTION "Option"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_DHT11 "DHT11"
# define D_SENSOR_AM2301 "AM2301"
# define D_SENSOR_SI7021 "SI7021"
# define D_SENSOR_DS18X20 "DS18x20"
# define D_SENSOR_I2C_SCL "I2C SCL"
# define D_SENSOR_I2C_SDA "I2C SDA"
# define D_SENSOR_WS2812 "WS2812"
# define D_SENSOR_DFR562 "MP3 Player"
# define D_SENSOR_IRSEND "IRsend"
# define D_SENSOR_SWITCH "Interruptor" // Suffix "1"
# define D_SENSOR_BUTTON "Botão" // Suffix "1"
# define D_SENSOR_RELAY "Relé" // Suffix "1i"
# define D_SENSOR_LED "Led" // Suffix "1i"
# define D_SENSOR_LED_LINK "LedLink" // Suffix "i"
# define D_SENSOR_PWM "PWM" // Suffix "1"
# define D_SENSOR_COUNTER "Contador" // Suffix "1"
# define D_SENSOR_IRRECV "IRrecv"
# define D_SENSOR_MHZ_RX "MHZ Rx"
# define D_SENSOR_MHZ_TX "MHZ Tx"
# define D_SENSOR_PZEM004_RX "PZEM004 Rx"
# define D_SENSOR_PZEM016_RX "PZEM016 Rx"
# define D_SENSOR_PZEM017_RX "PZEM017 Rx"
# define D_SENSOR_PZEM0XX_TX "PZEM0XX Tx"
# define D_SENSOR_SAIR_RX "SAir Rx"
# define D_SENSOR_SAIR_TX "SAir Tx"
# define D_SENSOR_SPI_CS "SPI CS"
# define D_SENSOR_SPI_DC "SPI DC"
# define D_SENSOR_SPI_MISO "SPI MISO"
# define D_SENSOR_SPI_MOSI "SPI MOSI"
# define D_SENSOR_SPI_CLK "SPI CLK"
# define D_SENSOR_BACKLIGHT "Luz fundo"
2020-04-08 18:47:45 +01:00
# define D_SENSOR_PMS5003_TX "PMS5003 Tx"
# define D_SENSOR_PMS5003_RX "PMS5003 Rx"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_SDS0X1_RX "SDS0X1 Rx"
# define D_SENSOR_SDS0X1_TX "SDS0X1 Tx"
# define D_SENSOR_HPMA_RX "HPMA Rx"
# define D_SENSOR_HPMA_TX "HPMA Tx"
# define D_SENSOR_SBR_RX "SerBr Rx"
# define D_SENSOR_SBR_TX "SerBr Tx"
# define D_SENSOR_SR04_TRIG "SR04 Tri / TX"
# define D_SENSOR_SR04_ECHO "SR04 Ech / RX"
# define D_SENSOR_SDM120_TX "SDMx20 Tx"
# define D_SENSOR_SDM120_RX "SDMx20 Rx"
# define D_SENSOR_SDM630_TX "SDM630 Tx"
# define D_SENSOR_SDM630_RX "SDM630 Rx"
2020-10-02 15:37:43 +01:00
# define D_SENSOR_WE517_TX "WE517 Tx"
# define D_SENSOR_WE517_RX "WE517 Rx"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_TM1638_CLK "TM16 CLK"
# define D_SENSOR_TM1638_DIO "TM16 DIO"
# define D_SENSOR_TM1638_STB "TM16 STB"
# define D_SENSOR_HX711_SCK "HX711 SCK"
# define D_SENSOR_HX711_DAT "HX711 DAT"
2020-12-22 19:51:03 +00:00
# define D_SENSOR_FTC532 "FTC532"
2020-02-20 17:50:43 +00:00
# define D_SENSOR_TX2X_TX "TX2x"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_RFSEND "RFSend"
# define D_SENSOR_RFRECV "RFrecv"
# define D_SENSOR_TUYA_TX "Tuya Tx"
# define D_SENSOR_TUYA_RX "Tuya Rx"
# define D_SENSOR_MGC3130_XFER "MGC3130 Xfr"
# define D_SENSOR_MGC3130_RESET "MGC3130 Rst"
# define D_SENSOR_SSPI_MISO "SSPI MISO"
# define D_SENSOR_SSPI_MOSI "SSPI MOSI"
# define D_SENSOR_SSPI_SCLK "SSPI SCLK"
# define D_SENSOR_SSPI_CS "SSPI CS"
# define D_SENSOR_SSPI_DC "SSPI DC"
# define D_SENSOR_RF_SENSOR "Sensor RF"
# define D_SENSOR_AZ_RX "AZ Rx"
# define D_SENSOR_AZ_TX "AZ Tx"
# define D_SENSOR_MAX31855_CS "MX31855 CS"
# define D_SENSOR_MAX31855_CLK "MX31855 CLK"
# define D_SENSOR_MAX31855_DO "MX31855 DO"
2020-08-23 11:24:35 +01:00
# define D_SENSOR_MAX31865_CS "MX31865 CS"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_NRG_SEL "HLWBL SEL" // Suffix "i"
# define D_SENSOR_NRG_CF1 "HLWBL CF1"
# define D_SENSOR_HLW_CF "HLW8012 CF"
# define D_SENSOR_HJL_CF "BL0937 CF"
# define D_SENSOR_MCP39F5_TX "MCP39F5 Tx"
# define D_SENSOR_MCP39F5_RX "MCP39F5 Rx"
# define D_SENSOR_MCP39F5_RST "MCP39F5 Rst"
# define D_SENSOR_CSE7766_TX "CSE7766 Tx"
# define D_SENSOR_CSE7766_RX "CSE7766 Rx"
# define D_SENSOR_PN532_TX "PN532 Tx"
# define D_SENSOR_PN532_RX "PN532 Rx"
# define D_SENSOR_SM16716_CLK "SM16716 CLK"
# define D_SENSOR_SM16716_DAT "SM16716 DAT"
# define D_SENSOR_SM16716_POWER "SM16716 PWR"
2020-12-17 15:33:26 +00:00
# define D_SENSOR_P9813_CLK "P9813 Clk"
# define D_SENSOR_P9813_DAT "P9813 Dat"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_MY92X1_DI "MY92x1 DI"
# define D_SENSOR_MY92X1_DCKI "MY92x1 DCKI"
# define D_SENSOR_ARIRFRCV "ALux IrRcv"
# define D_SENSOR_ARIRFSEL "ALux IrSel"
# define D_SENSOR_TXD "Serial Tx"
# define D_SENSOR_RXD "Serial Rx"
# define D_SENSOR_ROTARY "Rotativo" // Suffix "1A"
# define D_SENSOR_HRE_CLOCK "HRE Clock"
# define D_SENSOR_HRE_DATA "HRE Data"
# define D_SENSOR_ADE7953_IRQ "ADE7953 IRQ"
# define D_SENSOR_BUZZER "Buzzer"
# define D_SENSOR_OLED_RESET "OLED Reset"
# define D_SENSOR_ZIGBEE_TXD "Zigbee Tx"
# define D_SENSOR_ZIGBEE_RXD "Zigbee Rx"
2020-07-22 09:07:07 +01:00
# define D_SENSOR_ZIGBEE_RST "Zigbee Rst"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_SOLAXX1_TX "SolaxX1 Tx"
# define D_SENSOR_SOLAXX1_RX "SolaxX1 Rx"
# define D_SENSOR_IBEACON_TX "iBeacon TX"
# define D_SENSOR_IBEACON_RX "iBeacon RX"
# define D_SENSOR_RDM6300_RX "RDM6300 RX"
# define D_SENSOR_CC1101_CS "CC1101 CS"
# define D_SENSOR_A4988_DIR "A4988 DIR"
# define D_SENSOR_A4988_STP "A4988 STP"
# define D_SENSOR_A4988_ENA "A4988 ENA"
# define D_SENSOR_A4988_MS1 "A4988 MS1"
2020-10-23 14:18:58 +01:00
# define D_SENSOR_OUTPUT_HI "Output Hi"
# define D_SENSOR_OUTPUT_LO "Output Lo"
2020-11-10 14:04:45 +00:00
# define D_SENSOR_AS608_TX "AS608 Tx"
# define D_SENSOR_AS608_RX "AS608 Rx"
2019-12-17 02:09:34 +00:00
# define D_SENSOR_DDS2382_TX "DDS238-2 Tx"
# define D_SENSOR_DDS2382_RX "DDS238-2 Rx"
# define D_SENSOR_DDSU666_TX "DDSU666 Tx"
# define D_SENSOR_DDSU666_RX "DDSU666 Rx"
# define D_SENSOR_SM2135_CLK "SM2135 Clk"
# define D_SENSOR_SM2135_DAT "SM2135 Dat"
# define D_SENSOR_DEEPSLEEP "DeepSleep"
# define D_SENSOR_EXS_ENABLE "EXS Enable"
2020-06-18 15:05:55 +01:00
# define D_SENSOR_CLIENT_TX "Client TX"
# define D_SENSOR_CLIENT_RX "Client RX"
# define D_SENSOR_CLIENT_RESET "Client RST"
2019-12-17 02:16:25 +00:00
# define D_SENSOR_GPS_RX "GPS RX"
# define D_SENSOR_GPS_TX "GPS TX"
2020-02-06 16:05:37 +00:00
# define D_SENSOR_HM10_RX "HM10 RX"
# define D_SENSOR_HM10_TX "HM10 TX"
2020-01-23 16:18:44 +00:00
# define D_SENSOR_LE01MR_RX "LE-01MR Rx"
# define D_SENSOR_LE01MR_TX "LE-01MR Tx"
2020-06-07 16:21:29 +01:00
# define D_SENSOR_BL0940_RX "BL0940 Rx"
2020-02-27 20:31:19 +00:00
# define D_SENSOR_CC1101_GDO0 "CC1101 GDO0"
# define D_SENSOR_CC1101_GDO2 "CC1101 GDO2"
2020-02-28 00:28:06 +00:00
# define D_SENSOR_HRXL_RX "HRXL Rx"
2020-08-16 21:49:16 +01:00
# define D_SENSOR_DYP_RX "DYP Rx"
2020-03-18 10:24:56 +00:00
# define D_SENSOR_ELECTRIQ_MOODL "MOODL Tx"
2020-05-05 17:36:12 +01:00
# define D_SENSOR_AS3935 "AS3935"
2020-05-06 20:33:07 +01:00
# define D_SENSOR_WINDMETER_SPEED "WindMeter Spd"
2020-06-12 15:28:57 +01:00
# define D_SENSOR_TELEINFO_RX "TInfo Rx"
# define D_SENSOR_TELEINFO_ENABLE "TInfo EN"
2020-06-17 15:17:28 +01:00
# define D_SENSOR_LMT01_PULSE "LMT01 Pulse"
2020-08-04 15:33:05 +01:00
# define D_SENSOR_ADC_INPUT "ADC Input"
# define D_SENSOR_ADC_TEMP "ADC Temp"
# define D_SENSOR_ADC_LIGHT "ADC Light"
# define D_SENSOR_ADC_BUTTON "ADC Button"
# define D_SENSOR_ADC_RANGE "ADC Range"
# define D_SENSOR_ADC_CT_POWER "ADC CT Power"
# define D_SENSOR_ADC_JOYSTICK "ADC Joystick"
2021-01-05 16:25:08 +00:00
# define D_SENSOR_ADC_PH "ADC pH"
2020-05-05 17:36:12 +01:00
# define D_GPIO_WEBCAM_PWDN "CAM_PWDN"
# define D_GPIO_WEBCAM_RESET "CAM_RESET"
# define D_GPIO_WEBCAM_XCLK "CAM_XCLK"
# define D_GPIO_WEBCAM_SIOD "CAM_SIOD"
# define D_GPIO_WEBCAM_SIOC "CAM_SIOC"
# define D_GPIO_WEBCAM_DATA "CAM_DATA"
# define D_GPIO_WEBCAM_VSYNC "CAM_VSYNC"
# define D_GPIO_WEBCAM_HREF "CAM_HREF"
# define D_GPIO_WEBCAM_PCLK "CAM_PCLK"
# define D_GPIO_WEBCAM_PSCLK "CAM_PSCLK"
# define D_GPIO_WEBCAM_HSD "CAM_HSD"
# define D_GPIO_WEBCAM_PSRCS "CAM_PSRCS"
2020-06-16 17:36:49 +01:00
# define D_SENSOR_ETH_PHY_POWER "ETH POWER"
# define D_SENSOR_ETH_PHY_MDC "ETH MDC"
# define D_SENSOR_ETH_PHY_MDIO "ETH MDIO"
2020-06-15 18:22:56 +01:00
# define D_SENSOR_TCP_TXD "TCP Tx"
# define D_SENSOR_TCP_RXD "TCP Rx"
2020-07-12 16:52:24 +01:00
# define D_SENSOR_IEM3000_TX "iEM3000 TX"
# define D_SENSOR_IEM3000_RX "iEM3000 RX"
2020-10-02 14:10:21 +01:00
# define D_SENSOR_MIEL_HVAC_TX "MiEl HVAC Tx"
# define D_SENSOR_MIEL_HVAC_RX "MiEl HVAC Rx"
2020-11-14 15:43:32 +00:00
# define D_SENSOR_SHELLY_DIMMER_BOOT0 "SHD Boot 0"
# define D_SENSOR_SHELLY_DIMMER_RST_INV "SHD Reset"
2020-11-30 11:52:59 +00:00
# define D_SENSOR_RC522_RST "RC522 Rst"
2020-12-29 11:06:47 +00:00
# define D_SENSOR_RC522_CS "RC522 CS"
# define D_SENSOR_NRF24_CS "NRF24 CS"
# define D_SENSOR_NRF24_DC "NRF24 DC"
# define D_SENSOR_ILI9341_CS "ILI9341 CS"
# define D_SENSOR_ILI9341_DC "ILI9341 DC"
# define D_SENSOR_ILI9488_CS "ILI9488 CS"
# define D_SENSOR_EPAPER29_CS "EPaper29 CS"
# define D_SENSOR_EPAPER42_CS "EPaper42 CS"
# define D_SENSOR_SSD1351_CS "SSD1351 CS"
# define D_SENSOR_RA8876_CS "RA8876 CS"
# define D_SENSOR_ST7789_CS "ST7789 CS"
# define D_SENSOR_ST7789_DC "ST7789 DC"
2021-01-01 15:05:06 +00:00
# define D_SENSOR_SSD1331_CS "SSD1331 CS"
# define D_SENSOR_SSD1331_DC "SSD1331 DC"
2021-01-04 14:03:56 +00:00
# define D_SENSOR_SDCARD_CS "SDCard CS"
2019-12-17 02:09:34 +00:00
// Units
# define D_UNIT_AMPERE "A"
2020-05-07 23:34:25 +01:00
# define D_UNIT_CELSIUS "C"
2019-12-17 02:09:34 +00:00
# define D_UNIT_CENTIMETER "cm"
2020-05-07 23:34:25 +01:00
# define D_UNIT_DEGREE "°"
2020-05-07 23:53:13 +01:00
# define D_UNIT_FAHRENHEIT "F"
2019-12-17 02:09:34 +00:00
# define D_UNIT_HERTZ "Hz"
2019-12-30 17:44:08 +00:00
# define D_UNIT_HOUR "h"
2019-12-17 02:09:34 +00:00
# define D_UNIT_GALLONS "gal"
# define D_UNIT_GALLONS_PER_MIN "g / m"
# define D_UNIT_INCREMENTS "inc"
2020-05-07 23:34:25 +01:00
# define D_UNIT_KELVIN "K"
2020-04-11 00:48:37 +01:00
# define D_UNIT_KILOMETER "km"
2019-12-17 02:09:34 +00:00
# define D_UNIT_KILOGRAM "kg"
# define D_UNIT_KILOMETER_PER_HOUR "km / h" // or "km/h"
2019-12-30 17:44:08 +00:00
# define D_UNIT_KILOOHM "kΩ"
2019-12-17 02:09:34 +00:00
# define D_UNIT_KILOWATTHOUR "kWh"
2020-11-01 09:28:43 +00:00
# define D_UNIT_LITERS "L"
# define D_UNIT_LITERS_PER_MIN "L / m"
2019-12-17 02:09:34 +00:00
# define D_UNIT_LUX "lx"
2019-12-30 17:44:08 +00:00
# define D_UNIT_MICROGRAM_PER_CUBIC_METER "µg / m³"
# define D_UNIT_MICROMETER "µm"
# define D_UNIT_MICROSECOND "µs"
2020-10-24 08:54:25 +01:00
# define D_UNIT_MICROSIEMENS_PER_CM "µS / cm"
2019-12-17 02:09:34 +00:00
# define D_UNIT_MILLIAMPERE "mA"
2020-11-07 09:41:22 +00:00
# define D_UNIT_MILLILITERS "ml"
2019-12-17 02:09:34 +00:00
# define D_UNIT_MILLIMETER "mm"
# define D_UNIT_MILLIMETER_MERCURY "mmHg"
# define D_UNIT_MILLISECOND "ms"
2020-10-18 13:51:21 +01:00
# define D_UNIT_MILLIVOLT "mV"
2019-12-17 02:09:34 +00:00
# define D_UNIT_MINUTE "Min"
# define D_UNIT_PARTS_PER_BILLION "ppb"
# define D_UNIT_PARTS_PER_DECILITER "ppd"
# define D_UNIT_PARTS_PER_MILLION "ppm"
2020-05-07 23:34:25 +01:00
# define D_UNIT_PERCENT "%%"
2019-12-17 02:09:34 +00:00
# define D_UNIT_PRESSURE "hPa"
# define D_UNIT_SECOND "sec"
# define D_UNIT_SECTORS "setores"
# define D_UNIT_VA "VA"
# define D_UNIT_VAR "VAr"
# define D_UNIT_VOLT "V"
# define D_UNIT_WATT "W"
# define D_UNIT_WATTHOUR "Wh"
# define D_UNIT_WATT_METER_QUADRAT "W / m²"
2020-01-23 16:18:44 +00:00
//SDM220, SDM120, LE01MR
2019-12-17 02:09:34 +00:00
# define D_PHASE_ANGLE "Ângulo de fase"
# define D_IMPORT_ACTIVE "Ativo importado"
# define D_EXPORT_ACTIVE "Ativo exportado"
# define D_IMPORT_REACTIVE "Reativo importado"
# define D_EXPORT_REACTIVE "Reativo exportado"
# define D_TOTAL_REACTIVE "Reactivo total"
# define D_UNIT_KWARH "kVArh"
# define D_UNIT_ANGLE "Deg"
2020-01-23 16:18:44 +00:00
# define D_TOTAL_ACTIVE "Total Active"
2019-12-17 02:09:34 +00:00
//SOLAXX1
# define D_PV1_VOLTAGE "Voltagem PV1"
# define D_PV1_CURRENT "Corrente PV1"
# define D_PV1_POWER "Potência PV1"
# define D_PV2_VOLTAGE "Voltagem PV2"
# define D_PV2_CURRENT "Corrente PV2"
# define D_PV2_POWER "Potência PV2"
# define D_SOLAR_POWER "Potência Solar"
# define D_INVERTER_POWER "Potência do Inversor"
# define D_STATUS "Estado"
# define D_WAITING "Esperando"
# define D_CHECKING "Verificando"
# define D_WORKING "Trabalhando"
# define D_FAILURE "Falha"
# define D_SOLAX_ERROR_0 "Nenhum código de erro"
# define D_SOLAX_ERROR_1 "Falha devido a perda de rede"
# define D_SOLAX_ERROR_2 "Falha devido a perda de tensão"
# define D_SOLAX_ERROR_3 "Falha devido a perda de frequência"
# define D_SOLAX_ERROR_4 "Falha de tensão de Pv"
# define D_SOLAX_ERROR_5 "Falha de isolamento"
# define D_SOLAX_ERROR_6 "Falha de temperatura excessiva"
# define D_SOLAX_ERROR_7 "Falha no ventilador"
# define D_SOLAX_ERROR_8 "Outra falha no dispositivo"
2019-12-28 17:25:43 +00:00
//xdrv_10_scripter.ino
# define D_CONFIGURE_SCRIPT "Edit script"
# define D_SCRIPT "edit script"
# define D_SDCARD_UPLOAD "file upload"
2021-01-06 08:53:59 +00:00
# define D_UFSDIR "ufs directory"
2019-12-28 17:25:43 +00:00
# define D_UPL_DONE "Done"
# define D_SCRIPT_CHARS_LEFT "chars left"
# define D_SCRIPT_CHARS_NO_MORE "no more chars"
# define D_SCRIPT_DOWNLOAD "Download"
# define D_SCRIPT_ENABLE "script enable"
# define D_SCRIPT_UPLOAD "Upload"
# define D_SCRIPT_UPLOAD_FILES "Upload files"
2021-01-06 16:54:03 +00:00
//xdrv_50_filesystem.ino
# define D_MANAGE_FILE_SYSTEM "Manage File system"
# define D_FS_SIZE "Size"
# define D_FS_FREE "Free"
2020-04-25 23:43:50 +01:00
//xsns_67_as3935.ino
# define D_AS3935_GAIN "gain:"
# define D_AS3935_ENERGY "energy:"
# define D_AS3935_DISTANCE "distance:"
# define D_AS3935_DISTURBER "disturber:"
# define D_AS3935_VRMS "µVrms:"
# define D_AS3935_APRX "aprx.:"
# define D_AS3935_AWAY "away"
# define D_AS3935_LIGHT "lightning"
# define D_AS3935_OUT "lightning out of range"
# define D_AS3935_NOT "distance not determined"
# define D_AS3935_ABOVE "lightning overhead"
# define D_AS3935_NOISE "noise detected"
# define D_AS3935_DISTDET "disturber detected"
# define D_AS3935_INTNOEV "Interrupt with no Event!"
2020-09-03 08:37:10 +01:00
# define D_AS3935_FLICKER "IRQ flicker!"
# define D_AS3935_POWEROFF "Power Off"
2020-04-25 23:43:50 +01:00
# define D_AS3935_NOMESS "listening..."
# define D_AS3935_ON "On"
# define D_AS3935_OFF "Off"
# define D_AS3935_INDOORS "Indoors"
# define D_AS3935_OUTDOORS "Outdoors"
# define D_AS3935_CAL_FAIL "calibration failed"
# define D_AS3935_CAL_OK "calibration set to:"
2020-05-07 09:54:29 +01:00
//xsns_68_opentherm.ino
# define D_SENSOR_BOILER_OT_RX "OpenTherm RX"
# define D_SENSOR_BOILER_OT_TX "OpenTherm TX"
2020-08-10 16:42:31 +01:00
// xnrg_15_teleinfo Denky (Teleinfo)
# define D_CONTRACT "Contract"
# define D_POWER_LOAD "Power load"
# define D_CURRENT_TARIFF "Current Tariff"
# define D_TARIFF "Tariff"
# define D_OVERLOAD "ADPS"
# define D_MAX_POWER "Max Power"
# define D_MAX_CURRENT "Max Current"
2020-11-11 16:31:48 +00:00
// xsns_79_as608.ino
# define D_FP_ENROLL_PLACEFINGER "Place finger"
# define D_FP_ENROLL_REMOVEFINGER "Remove finger"
# define D_FP_ENROLL_PLACESAMEFINGER "Place same finger again"
# define D_FP_ENROLL_RETRY "Error so retry"
# define D_FP_ENROLL_RESTART "Restart"
# define D_FP_ENROLL_ERROR "Error"
# define D_FP_ENROLL_RESET "Reset"
# define D_FP_ENROLL_ACTIVE "Active"
# define D_FP_ENROLL_INACTIVE "Inactive"
// Indexed by Adafruit_Fingerprint.h defines
# define D_FP_PACKETRECIEVEERR "Comms error" // 0x01 Error when receiving data package
# define D_FP_NOFINGER "" // 0x02 No finger on the sensor
# define D_FP_IMAGEFAIL "Imaging error" // 0x03 Failed to enroll the finger
# define D_FP_IMAGEMESS "Image too messy" // 0x06 Failed to generate character file due to overly disorderly fingerprint image
# define D_FP_FEATUREFAIL "Fingerprint too small" // 0x07 Failed to generate character file due to the lack of character point or small fingerprint image
# define D_FP_NOMATCH "No match" // 0x08 Finger doesn't match
# define D_FP_NOTFOUND "Did not find a match" // 0x09 Failed to find matching finger
# define D_FP_ENROLLMISMATCH "Fingerprint did not match" // 0x0A Failed to combine the character files
# define D_FP_BADLOCATION "Bad location" // 0x0B Addressed PageID is beyond the finger library
# define D_FP_DBRANGEFAIL "DB range error" // 0x0C Error when reading template from library or invalid template
# define D_FP_UPLOADFEATUREFAIL "Upload feature error" // 0x0D Error when uploading template
# define D_FP_PACKETRESPONSEFAIL "Packet response error" // 0x0E Module failed to receive the following data packages
# define D_FP_UPLOADFAIL "Upload error" // 0x0F Error when uploading image
# define D_FP_DELETEFAIL "Delete error" // 0x10 Failed to delete the template
# define D_FP_DBCLEARFAIL "DB Clear error" // 0x11 Failed to clear finger library
# define D_FP_PASSFAIL "Password error" // 0x13 Find whether the fingerprint passed or failed
# define D_FP_INVALIDIMAGE "Image invalid" // 0x15 Failed to generate image because of lac of valid primary image
# define D_FP_FLASHERR "Flash write error" // 0x18 Error when writing flash
# define D_FP_INVALIDREG "Invalid number" // 0x1A Invalid register number
# define D_FP_ADDRCODE "Address code" // 0x20 Address code
# define D_FP_PASSVERIFY "Password verified" // 0x21 Verify the fingerprint passed
# define D_FP_UNKNOWNERROR "Error" // Any other error
2019-12-17 02:09:34 +00:00
# endif // _LANGUAGE_PT_PT_H_
