Tasmota/sonoff/sonoff_template.h

915 lines
35 KiB
C
Raw Normal View History

/*
sonoff_template.h - template settings for Sonoff-Tasmota
Copyright (C) 2018 Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
2017-01-28 13:41:01 +00:00
#ifndef _SONOFF_TEMPLATE_H_
#define _SONOFF_TEMPLATE_H_
// User selectable GPIO functionality
enum UserSelectablePins {
GPIO_NONE, // Not used
GPIO_DHT11, // DHT11
GPIO_DHT22, // DHT21, DHT22, AM2301, AM2302, AM2321
GPIO_SI7021, // iTead SI7021
GPIO_DSB, // Single wire DS18B20 or DS18S20
GPIO_I2C_SCL, // I2C SCL
GPIO_I2C_SDA, // I2C SDA
GPIO_WS2812, // WS2812 Led string
GPIO_IRSEND, // IR remote
GPIO_SWT1, // User connected external switches
GPIO_SWT2,
GPIO_SWT3,
GPIO_SWT4,
GPIO_KEY1, // Button usually connected to GPIO0
GPIO_KEY2,
GPIO_KEY3,
GPIO_KEY4,
GPIO_REL1, // Relays
GPIO_REL2,
GPIO_REL3,
GPIO_REL4,
GPIO_REL5,
GPIO_REL6,
GPIO_REL7,
GPIO_REL8,
GPIO_REL1_INV,
GPIO_REL2_INV,
GPIO_REL3_INV,
GPIO_REL4_INV,
GPIO_REL5_INV,
GPIO_REL6_INV,
GPIO_REL7_INV,
GPIO_REL8_INV,
GPIO_PWM1, // RGB Red or C Cold White
GPIO_PWM2, // RGB Green or CW Warm White
GPIO_PWM3, // RGB Blue
GPIO_PWM4, // RGBW (Cold) White
GPIO_PWM5, // RGBCW Warm White
GPIO_CNTR1,
GPIO_CNTR2,
GPIO_CNTR3,
GPIO_CNTR4,
GPIO_PWM1_INV, // RGB Red or C Cold White
GPIO_PWM2_INV, // RGB Green or CW Warm White
GPIO_PWM3_INV, // RGB Blue
GPIO_PWM4_INV, // RGBW (Cold) White
GPIO_PWM5_INV, // RGBCW Warm White
GPIO_IRRECV, // IR receiver
GPIO_LED1, // Leds
GPIO_LED2,
GPIO_LED3,
GPIO_LED4,
GPIO_LED1_INV,
GPIO_LED2_INV,
GPIO_LED3_INV,
GPIO_LED4_INV,
GPIO_MHZ_TXD, // MH-Z19 Serial interface
GPIO_MHZ_RXD, // MH-Z19 Serial interface
GPIO_PZEM_TX, // PZEM004T Serial interface
GPIO_PZEM_RX, // PZEM004T Serial interface
GPIO_SAIR_TX, // SenseAir Serial interface
GPIO_SAIR_RX, // SenseAir Serial interface
GPIO_SPI_CS, // SPI Chip Select
GPIO_SPI_DC, // SPI Data Direction
GPIO_BACKLIGHT, // Display backlight control
GPIO_PMS5003, // Plantower PMS5003 Serial interface
GPIO_SDS0X1, // Nova Fitness SDS011 Serial interface
GPIO_SBR_TX, // Serial Bridge Serial interface
GPIO_SBR_RX, // Serial Bridge Serial interface
GPIO_SR04_TRIG, // SR04 Trigger pin
GPIO_SR04_ECHO, // SR04 Echo pin
GPIO_SDM120_TX, // SDM120 Serial interface
GPIO_SDM120_RX, // SDM120 Serial interface
GPIO_SDM630_TX, // SDM630 Serial interface
GPIO_SDM630_RX, // SDM630 Serial interface
GPIO_SENSOR_END };
// Programmer selectable GPIO functionality offset by user selectable GPIOs
enum ProgramSelectablePins {
GPIO_RXD = GPIO_SENSOR_END, // Serial interface
GPIO_TXD, // Serial interface
GPIO_SPI_MISO, // SPI MISO library fixed pin GPIO12
GPIO_SPI_MOSI, // SPI MOSI library fixed pin GPIO13
GPIO_SPI_CLK, // SPI Clk library fixed pin GPIO14
GPIO_HLW_SEL, // HLW8012 Sel output (Sonoff Pow)
GPIO_HLW_CF1, // HLW8012 CF1 voltage / current (Sonoff Pow)
GPIO_HLW_CF, // HLW8012 CF power (Sonoff Pow)
GPIO_ADC0, // ADC
GPIO_DI, // my92x1 PWM input
GPIO_DCKI, // my92x1 CLK input
GPIO_ARIRFRCV, // AliLux RF Receive input
GPIO_USER, // User configurable
GPIO_MAX };
2017-01-28 13:41:01 +00:00
// Text in webpage Module Parameters and commands GPIOS and GPIO
const char kSensorNames[] PROGMEM =
D_SENSOR_NONE "|"
D_SENSOR_DHT11 "|" D_SENSOR_AM2301 "|" D_SENSOR_SI7021 "|"
D_SENSOR_DS18X20 "|"
D_SENSOR_I2C_SCL "|" D_SENSOR_I2C_SDA "|"
D_SENSOR_WS2812 "|"
D_SENSOR_IRSEND "|"
D_SENSOR_SWITCH "1|" D_SENSOR_SWITCH "2|" D_SENSOR_SWITCH "3|" D_SENSOR_SWITCH "4|"
D_SENSOR_BUTTON "1|" D_SENSOR_BUTTON "2|" D_SENSOR_BUTTON "3|" D_SENSOR_BUTTON "4|"
D_SENSOR_RELAY "1|" D_SENSOR_RELAY "2|" D_SENSOR_RELAY "3|" D_SENSOR_RELAY "4|" D_SENSOR_RELAY "5|" D_SENSOR_RELAY "6|" D_SENSOR_RELAY "7|" D_SENSOR_RELAY "8|"
D_SENSOR_RELAY "1i|" D_SENSOR_RELAY "2i|" D_SENSOR_RELAY "3i|" D_SENSOR_RELAY "4i|" D_SENSOR_RELAY "5i|" D_SENSOR_RELAY "6i|" D_SENSOR_RELAY "7i|" D_SENSOR_RELAY "8i|"
D_SENSOR_PWM "1|" D_SENSOR_PWM "2|" D_SENSOR_PWM "3|" D_SENSOR_PWM "4|" D_SENSOR_PWM "5|"
D_SENSOR_COUNTER "1|" D_SENSOR_COUNTER "2|" D_SENSOR_COUNTER "3|" D_SENSOR_COUNTER "4|"
D_SENSOR_PWM "1i|" D_SENSOR_PWM "2i|" D_SENSOR_PWM "3i|" D_SENSOR_PWM "4i|" D_SENSOR_PWM "5i|"
D_SENSOR_IRRECV "|"
D_SENSOR_LED "1|" D_SENSOR_LED "2|" D_SENSOR_LED "3|" D_SENSOR_LED "4|"
D_SENSOR_LED "1i|" D_SENSOR_LED "2i|" D_SENSOR_LED "3i|" D_SENSOR_LED "4i|"
D_SENSOR_MHZ_TX "|" D_SENSOR_MHZ_RX "|"
D_SENSOR_PZEM_TX "|" D_SENSOR_PZEM_RX "|"
D_SENSOR_SAIR_TX "|" D_SENSOR_SAIR_RX "|"
D_SENSOR_SPI_CS "|" D_SENSOR_SPI_DC "|" D_SENSOR_BACKLIGHT "|"
D_SENSOR_PMS5003 "|" D_SENSOR_SDS0X1 "|"
D_SENSOR_SBR_TX "|" D_SENSOR_SBR_RX "|"
D_SENSOR_SR04_TRIG "|" D_SENSOR_SR04_ECHO "|"
D_SENSOR_SDM120_TX "|" D_SENSOR_SDM120_RX "|"
D_SENSOR_SDM630_TX "|" D_SENSOR_SDM630_RX;
2017-01-28 13:41:01 +00:00
/********************************************************************************************/
// Supported hardware modules
enum SupportedModules {
SONOFF_BASIC,
SONOFF_RF,
SONOFF_SV,
SONOFF_TH,
SONOFF_DUAL,
SONOFF_POW,
SONOFF_4CH,
S20,
SLAMPHER,
SONOFF_TOUCH,
SONOFF_LED,
CH1,
CH4,
MOTOR,
ELECTRODRAGON,
EXS_RELAY,
WION,
WEMOS,
SONOFF_DEV,
H801,
SONOFF_SC,
SONOFF_BN,
SONOFF_4CHPRO,
HUAFAN_SS,
SONOFF_BRIDGE,
2017-08-12 16:55:20 +01:00
SONOFF_B1,
AILIGHT,
SONOFF_T11,
SONOFF_T12,
SONOFF_T13,
2017-08-19 17:08:06 +01:00
SUPLA1,
WITTY,
YUNSHAN,
MAGICHOME,
LUANIHVIO,
KMC_70011,
ARILUX_LC01,
ARILUX_LC11,
SONOFF_DUAL_R2,
ARILUX_LC06,
SONOFF_S31,
ZENGGE_ZF_WF017,
SONOFF_POW_R2,
MAXMODULE };
2017-01-28 13:41:01 +00:00
/********************************************************************************************/
#define MAX_GPIO_PIN 18 // Number of supported GPIO
2017-01-28 13:41:01 +00:00
const char PINS_WEMOS[] PROGMEM = "D3TXD4RXD2D1flashcontrolD6D7D5D8D0A0";
2017-01-28 13:41:01 +00:00
typedef struct MYIO {
uint8_t io[MAX_GPIO_PIN];
} myio;
typedef struct MYTMPLT {
char name[15];
myio gp;
2017-01-28 13:41:01 +00:00
} mytmplt;
const uint8_t kNiceList[MAXMODULE] PROGMEM = {
SONOFF_BASIC,
SONOFF_RF,
SONOFF_TH,
SONOFF_DUAL,
SONOFF_DUAL_R2,
SONOFF_POW,
SONOFF_POW_R2,
SONOFF_S31,
SONOFF_4CH,
SONOFF_4CHPRO,
SONOFF_SV,
SONOFF_DEV,
S20,
SLAMPHER,
SONOFF_TOUCH,
SONOFF_T11,
SONOFF_T12,
SONOFF_T13,
SONOFF_SC,
SONOFF_B1,
SONOFF_LED,
SONOFF_BN,
SONOFF_BRIDGE,
CH1,
CH4,
MOTOR,
ELECTRODRAGON,
EXS_RELAY,
2017-08-19 17:08:06 +01:00
SUPLA1,
LUANIHVIO,
YUNSHAN,
WION,
H801,
MAGICHOME,
ARILUX_LC01,
ARILUX_LC06,
ARILUX_LC11,
ZENGGE_ZF_WF017,
HUAFAN_SS,
KMC_70011,
AILIGHT,
WEMOS,
WITTY
};
// Default module settings
const mytmplt kModules[MAXMODULE] PROGMEM = {
{ "Sonoff Basic", // Sonoff Basic (ESP8266)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
0, // GPIO02
2017-01-28 13:41:01 +00:00
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
0, // GPIO05
0, // GPIO06 (SD_CLK Flash)
0, // GPIO07 (SD_DATA0 Flash QIO/DIO/DOUT)
0, // GPIO08 (SD_DATA1 Flash QIO/DIO/DOUT)
0, // GPIO09 (SD_DATA2 Flash QIO)
0, // GPIO10 (SD_DATA3 Flash QIO)
0, // GPIO11 (SD_CMD Flash)
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor
0, // GPIO15
0, // GPIO16
0 // ADC0 Analog input
2017-01-28 13:41:01 +00:00
},
{ "Sonoff RF", // Sonoff RF (ESP8266)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
0,
2017-01-28 13:41:01 +00:00
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
0,
0, 0, 0, 0, 0, 0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor
0, 0, 0
2017-01-28 13:41:01 +00:00
},
{ "Sonoff SV", // Sonoff SV (ESP8266)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
0,
2017-01-28 13:41:01 +00:00
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
GPIO_USER, // GPIO05 Optional sensor
0, 0, 0, 0, 0, 0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor
0, 0,
GPIO_ADC0 // ADC0 Analog input
2017-01-28 13:41:01 +00:00
},
{ "Sonoff TH", // Sonoff TH10/16 (ESP8266)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
0,
2017-01-28 13:41:01 +00:00
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
0,
0, 0, 0, 0, 0, 0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor
0, 0, 0
2017-01-28 13:41:01 +00:00
},
{ "Sonoff Dual", // Sonoff Dual (ESP8266)
2017-01-28 13:41:01 +00:00
0,
GPIO_TXD, // GPIO01 Relay control
0,
GPIO_RXD, // GPIO03 Relay control
GPIO_USER, // GPIO04 Optional sensor
0,
0, 0, 0, 0, 0, 0, // Flash connection
0,
2017-01-28 13:41:01 +00:00
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor
0, 0, 0
2017-01-28 13:41:01 +00:00
},
{ "Sonoff Pow", // Sonoff Pow (ESP8266 - HLW8012)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
0, 0, 0, 0,
GPIO_HLW_SEL, // GPIO05 HLW8012 Sel output
0, 0, 0, 0, 0, 0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_HLW_CF1, // GPIO13 HLW8012 CF1 voltage / current
GPIO_HLW_CF, // GPIO14 HLW8012 CF power
GPIO_LED1, // GPIO15 Blue Led (0 = On, 1 = Off)
0, 0
2017-01-28 13:41:01 +00:00
},
{ "Sonoff 4CH", // Sonoff 4CH (ESP8285)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button 1
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
2017-01-28 13:41:01 +00:00
GPIO_USER, // GPIO02 Optional sensor
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
2017-01-28 13:41:01 +00:00
GPIO_REL3, // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On)
GPIO_REL2, // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On)
0, 0, 0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_KEY2, // GPIO09 Button 2
GPIO_KEY3, // GPIO10 Button 3
0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
2017-01-28 13:41:01 +00:00
GPIO_KEY4, // GPIO14 Button 4
GPIO_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On)
0, 0
2017-01-28 13:41:01 +00:00
},
{ "S20 Socket", // S20 Smart Socket (ESP8266)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
0,
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
0, 0,
0, 0, 0, 0, 0, 0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
0, 0, 0, 0
2017-01-28 13:41:01 +00:00
},
{ "Slampher", // Slampher (ESP8266)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
0,
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
0, 0,
0, 0, 0, 0, 0, 0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0, 0
2017-01-28 13:41:01 +00:00
},
{ "Sonoff Touch", // Sonoff Touch (ESP8285)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
0,
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
0, 0,
0, 0, 0, // Flash connection
0, 0,
0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0, 0
2017-01-28 13:41:01 +00:00
},
{ "Sonoff LED", // Sonoff LED (ESP8266)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
0, 0, 0,
GPIO_USER, // GPIO04 Optional sensor (PWM3 Green)
GPIO_USER, // GPIO05 Optional sensor (PWM2 Red)
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_PWM1, // GPIO12 Cold light (PWM0 Cold)
2017-01-28 13:41:01 +00:00
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
GPIO_PWM2, // GPIO14 Warm light (PWM1 Warm)
GPIO_USER, // GPIO15 Optional sensor (PWM4 Blue)
0, 0
2017-01-28 13:41:01 +00:00
},
{ "1 Channel", // 1 Channel Inching/Latching Relay using (PSA-B01 - ESP8266 and PSF-B01 - ESP8285)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
0, 0, 0, 0
2017-01-28 13:41:01 +00:00
},
{ "4 Channel", // 4 Channel Inching/Latching Relays (ESP8266)
2017-01-28 13:41:01 +00:00
0,
GPIO_TXD, // GPIO01 Relay control
0,
GPIO_RXD, // GPIO03 Relay control
0, 0,
0, 0, 0, 0, 0, 0, // Flash connection
0,
2017-01-28 13:41:01 +00:00
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0, 0
2017-01-28 13:41:01 +00:00
},
{ "Motor C/AC", // Motor Clockwise / Anti clockwise (PSA-B01 - ESP8266)
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO00 Button
0, 0, 0, 0, 0,
0, 0, 0, 0, 0, 0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
0, 0, 0, 0
2017-01-28 13:41:01 +00:00
},
{ "ElectroDragon", // ElectroDragon IoT Relay Board (ESP8266)
2017-01-28 13:41:01 +00:00
GPIO_KEY2, // GPIO00 Button 2
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
2017-01-28 13:41:01 +00:00
GPIO_KEY1, // GPIO02 Button 1
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
GPIO_USER, // GPIO05 Optional sensor
0, 0, 0, 0, 0, 0, // Flash connection
2017-01-28 13:41:01 +00:00
GPIO_REL2, // GPIO12 Red Led and Relay 2 (0 = Off, 1 = On)
GPIO_REL1, // GPIO13 Red Led and Relay 1 (0 = Off, 1 = On)
GPIO_USER, // GPIO14 Optional sensor
GPIO_USER, // GPIO15 Optional sensor
GPIO_LED1, // GPIO16 Green/Blue Led (1 = On, 0 = Off)
GPIO_ADC0 // ADC0 A0 Analog input
2017-01-28 13:41:01 +00:00
},
{ "EXS Relay", // Latching relay https://ex-store.de/ESP8266-WiFi-Relay-V31 (ESP8266)
// Module Pin 1 VCC 3V3, Module Pin 6 GND
GPIO_KEY1, // GPIO00 Module Pin 8 - Button (firmware flash)
GPIO_USER, // GPIO01 Module Pin 2 = UART0_TXD
GPIO_USER, // GPIO02 Module Pin 7
GPIO_USER, // GPIO03 Module Pin 3 = UART0_RXD
GPIO_USER, // GPIO04 Module Pin 10
GPIO_USER, // GPIO05 Module Pin 9
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_REL1, // GPIO12 Relay1 ( 1 = Off)
GPIO_REL2, // GPIO13 Relay1 ( 1 = On)
GPIO_USER, // GPIO14 Module Pin 5
0,
GPIO_USER, // GPIO16 Module Pin 4
0
},
{ "WiOn", // Indoor Tap https://www.amazon.com/gp/product/B00ZYLUBJU/ref=s9_acsd_al_bw_c_x_3_w (ESP8266)
GPIO_USER, // GPIO00 Optional sensor (pm clock)
0,
GPIO_LED1, // GPIO02 Green Led (1 = On, 0 = Off)
0, 0, 0,
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_USER, // GPIO12 Optional sensor (pm data)
GPIO_KEY1, // GPIO13 Button
0,
GPIO_REL1, // GPIO15 Relay (0 = Off, 1 = On)
0, 0
},
{ "Generic", // Any ESP8266/ESP8285 device like WeMos and NodeMCU hardware (ESP8266)
GPIO_USER, // GPIO00 D3 Wemos Button Shield
GPIO_USER, // GPIO01 TX Serial RXD
GPIO_USER, // GPIO02 D4 Wemos DHT Shield
GPIO_USER, // GPIO03 RX Serial TXD and Optional sensor
GPIO_USER, // GPIO04 D2 Wemos I2C SDA
GPIO_USER, // GPIO05 D1 Wemos I2C SCL / Wemos Relay Shield (0 = Off, 1 = On) / Wemos WS2812B RGB led Shield
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_USER, // GPIO12 D6
GPIO_USER, // GPIO13 D7
GPIO_USER, // GPIO14 D5
GPIO_USER, // GPIO15 D8
GPIO_USER, // GPIO16 D0 Wemos Wake
GPIO_ADC0 // ADC0 A0 Analog input
},
{ "Sonoff Dev", // Sonoff Dev (ESP8266)
GPIO_KEY1, // GPIO00 E-FW Button
GPIO_USER, // GPIO01 TX Serial RXD and Optional sensor
0, // GPIO02
GPIO_USER, // GPIO03 RX Serial TXD and Optional sensor
GPIO_USER, // GPIO04 Optional sensor
GPIO_USER, // GPIO05 Optional sensor
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_USER, // GPIO12
2018-04-03 15:45:33 +01:00
GPIO_USER, // GPIO13 BLUE LED
GPIO_USER, // GPIO14 Optional sensor
0, // GPIO15
0, // GPIO16
GPIO_ADC0 // ADC0 A0 Analog input
},
{ "H801", // Lixada H801 Wifi (ESP8266)
GPIO_USER, // GPIO00 E-FW Button
GPIO_LED1, // GPIO01 Green LED
GPIO_TXD, // GPIO02 RX - Pin next to TX on the PCB
GPIO_RXD, // GPIO03 TX - Pin next to GND on the PCB
2018-04-13 09:33:17 +01:00
GPIO_PWM5, // GPIO04 W2 - PWM5
GPIO_LED2_INV, // GPIO05 Red LED
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_PWM3, // GPIO12 Blue
GPIO_PWM2, // GPIO13 Green
2018-04-13 09:33:17 +01:00
GPIO_PWM4, // GPIO14 W1 - PWM4
GPIO_PWM1, // GPIO15 Red
0, 0
},
{ "Sonoff SC", // Sonoff SC (ESP8266)
GPIO_KEY1, // GPIO00 Button
GPIO_TXD, // GPIO01 RXD to ATMEGA328P
GPIO_USER, // GPIO02 Optional sensor
GPIO_RXD, // GPIO03 TXD to ATMEGA328P
0, 0,
0, 0, 0, 0, 0, 0, // Flash connection
0,
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
0, 0, 0, 0
},
{ "Sonoff BN-SZ", // Sonoff BN-SZ01 Ceiling led (ESP8285)
0, 0, 0, 0, 0, 0,
0, 0, 0, // Flash connection
0, 0,
0, // Flash connection
GPIO_PWM1, // GPIO12 Light
GPIO_LED1_INV, // GPIO13 Red Led (0 = On, 1 = Off)
0, 0,
0, 0
},
{ "Sonoff 4CH Pro", // Sonoff 4CH Pro (ESP8285)
GPIO_KEY1, // GPIO00 Button 1
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_USER, // GPIO02 Optional sensor
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_REL3, // GPIO04 Sonoff 4CH Red Led and Relay 3 (0 = Off, 1 = On)
GPIO_REL2, // GPIO05 Sonoff 4CH Red Led and Relay 2 (0 = Off, 1 = On)
0, 0, 0, // Flash connection
GPIO_KEY2, // GPIO09 Button 2
GPIO_KEY3, // GPIO10 Button 3
0, // Flash connection
GPIO_REL1, // GPIO12 Red Led and Relay 1 (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
GPIO_KEY4, // GPIO14 Button 4
GPIO_REL4, // GPIO15 Red Led and Relay 4 (0 = Off, 1 = On)
0, 0
},
{ "Huafan SS", // Hua Fan Smart Socket (ESP8266) - like Sonoff Pow
GPIO_LED1_INV, // GPIO0 Blue Led (0 = On, 1 = Off)
0, 0,
GPIO_LED2_INV, // GPIO3 Red Led (0 = On, 1 = Off)
GPIO_KEY1, // GPIO4 Button
GPIO_REL1_INV, // GPIO5 Relay (0 = On, 1 = Off)
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_HLW_CF1, // GPIO12 HLW8012 CF1 voltage / current
GPIO_HLW_SEL, // GPIO13 HLW8012 Sel output
GPIO_HLW_CF, // GPIO14 HLW8012 CF power
0, 0, 0
},
{ "Sonoff Bridge", // Sonoff RF Bridge 433 (ESP8285)
GPIO_KEY1, // GPIO00 Button
GPIO_TXD, // GPIO01 RF bridge control
GPIO_USER, // GPIO02 Optional sensor
GPIO_RXD, // GPIO03 RF bridge control
2017-08-16 16:05:36 +01:00
GPIO_USER, // GPIO04 Optional sensor
GPIO_USER, // GPIO05 Optional sensor
0, 0, 0, // Flash connection
0, 0,
0, // Flash connection
0,
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0, 0
2017-08-12 16:55:20 +01:00
},
{ "Sonoff B1", // Sonoff B1 (ESP8285 - my9231)
GPIO_KEY1, // GPIO00 Pad
GPIO_USER, // GPIO01 Serial RXD and Optional sensor pad
GPIO_USER, // GPIO02 Optional sensor SDA pad
GPIO_USER, // GPIO03 Serial TXD and Optional sensor pad
0, 0,
0, 0, 0, // Flash connection
0, 0,
0, // Flash connection
GPIO_DI, // GPIO12 my9231 DI
0,
GPIO_DCKI, // GPIO14 my9231 DCKI
0, 0, 0
2017-08-13 12:11:44 +01:00
},
{ "AiLight", // Ai-Thinker RGBW led (ESP8266 - my9291)
2017-08-13 12:11:44 +01:00
GPIO_KEY1, // GPIO00 Pad
GPIO_USER, // GPIO01 Serial RXD and Optional sensor pad
GPIO_USER, // GPIO02 Optional sensor SDA pad
GPIO_USER, // GPIO03 Serial TXD and Optional sensor pad
0, 0,
0, 0, 0, // Flash connection
0, 0,
0, // Flash connection
0,
GPIO_DI, // GPIO13 my9291 DI
2017-08-13 12:11:44 +01:00
0,
GPIO_DCKI, // GPIO15 my9291 DCKI
2017-08-13 12:11:44 +01:00
0, 0
},
{ "Sonoff T1 1CH", // Sonoff T1 1CH (ESP8285)
GPIO_KEY1, // GPIO00 Button 1
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_USER, // GPIO02 Optional Sensor (J3 Pin 5)
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
0, 0,
0, 0, 0, // Flash connection
0, 0,
0, // Flash connection
GPIO_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0, 0
},
{ "Sonoff T1 2CH", // Sonoff T1 2CH (ESP8285)
GPIO_KEY1, // GPIO00 Button 1
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_USER, // GPIO02 Optional Sensor (J3 Pin 5)
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
0,
GPIO_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On)
0, 0, 0, // Flash connection
GPIO_KEY2, // GPIO09 Button 2
0,
0, // Flash connection
GPIO_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0, 0
},
{ "Sonoff T1 3CH", // Sonoff T1 3CH (ESP8285)
GPIO_KEY1, // GPIO00 Button 1
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_USER, // GPIO02 Optional Sensor (J3 Pin 5)
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_REL3, // GPIO04 Blue Led and Relay 3 (0 = Off, 1 = On)
GPIO_REL2, // GPIO05 Blue Led and Relay 2 (0 = Off, 1 = On)
0, 0, 0, // Flash connection
GPIO_KEY2, // GPIO09 Button 2
GPIO_KEY3, // GPIO10 Button 3
0, // Flash connection
GPIO_REL1, // GPIO12 Blue Led and Relay 1 (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0, 0
2017-08-19 17:08:06 +01:00
},
{ "Supla Espablo", // Supla Espablo (ESP8266) - http://www.wykop.pl/ramka/3325399/diy-supla-do-puszki-instalacyjnej-podtynkowej-supla-org/
0, // GPIO00 Flash jumper
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_DSB, // GPIO02 DS18B20 sensor
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_KEY1, // GPIO04 Button 1
GPIO_REL1, // GPIO05 Relay 1 (0 = Off, 1 = On)
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_USER, // GPIO12 Optional sensor
GPIO_REL2, // GPIO13 Relay 2 (0 = Off, 1 = On)
GPIO_USER, // GPIO14 Optional sensor
0,
GPIO_LED1, // GPIO16 Led (1 = On, 0 = Off)
GPIO_ADC0 // ADC0 A0 Analog input
},
{ "Witty Cloud", // Witty Cloud Dev Board (ESP8266) - https://www.aliexpress.com/item/ESP8266-serial-WIFI-Witty-cloud-Development-Board-ESP-12F-module-MINI-nodemcu/32643464555.html
GPIO_USER, // GPIO00 D3 flash push button on interface board
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_LED1_INV, // GPIO02 D4 Blue Led (0 = On, 1 = Off) on ESP-12F
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_KEY1, // GPIO04 D2 push button on ESP-12F board
GPIO_USER, // GPIO05 D1 optional sensor
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_PWM2, // GPIO12 D6 RGB LED Green
GPIO_PWM3, // GPIO13 D7 RGB LED Blue
GPIO_USER, // GPIO14 D5 optional sensor
GPIO_PWM1, // GPIO15 D8 RGB LED Red
GPIO_USER, // GPIO16 D0 optional sensor
GPIO_ADC0 // ADC0 A0 Light sensor / Requires USE_ADC_VCC in user_config.h to be disabled
},
{ "Yunshan Relay", // Yunshan Wifi Relay (ESP8266) - https://www.ebay.com/p/Esp8266-220v-10a-Network-Relay-WiFi-Module/1369583381
// Schematics and Info https://ucexperiment.wordpress.com/2016/12/18/yunshan-esp8266-250v-15a-acdc-network-wifi-relay-module/
0, // GPIO00 Flash jumper - Module Pin 8
GPIO_USER, // GPIO01 Serial RXD and Optional sensor - Module Pin 2
GPIO_LED1_INV, // GPIO02 Blue Led (0 = On, 1 = Off) on ESP-12F - Module Pin 7
GPIO_USER, // GPIO03 Serial TXD and Optional sensor - Module Pin 3
GPIO_REL1, // GPIO04 Red Led and Relay (0 = Off, 1 = On) - Module Pin 10
GPIO_KEY1, // GPIO05 Blue Led and OptoCoupler input - Module Pin 9
0, 0, 0, 0, 0, 0, // Flash connection
0, 0, 0, 0, 0
},
{ "MagicHome", // Magic Home (aka Flux-light) (ESP8266) - https://www.aliexpress.com/item/Magic-Home-Mini-RGB-RGBW-Wifi-Controller-For-Led-Strip-Panel-light-Timing-Function-16million-colors/32686853650.html
0,
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_LED1_INV, // GPIO02 Blue onboard LED
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 IR receiver (optional)
GPIO_PWM2, // GPIO05 RGB LED Green
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_PWM3, // GPIO12 RGB LED Blue
GPIO_USER, // GPIO13 RGBW LED White (optional - set to PWM4 for Cold White or Warm White)
GPIO_PWM1, // GPIO14 RGB LED Red
0, 0, 0
},
{ "Luani HVIO", // ESP8266_HVIO - https://luani.de/projekte/esp8266-hvio/
0, // GPIO00 Flash jumper
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_USER, // GPIO02 Optional sensor / I2C SDA pad
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_REL1, // GPIO04 Relay 1 (0 = Off, 1 = On)
GPIO_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On)
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_SWT1, // GPIO12 External input 1 (0 = On, 1 = Off)
GPIO_SWT2, // GPIO13 External input 2 (0 = On, 1 = Off)
GPIO_USER, // GPIO14 Optional sensor / I2C SCL pad
GPIO_LED1, // GPIO15 Led (1 = On, 0 = Off)
0,
GPIO_ADC0 // ADC0 A0 Analog input
},
{ "KMC 70011", // KMC 70011 (https://www.amazon.com/KMC-Timing-Monitoring-Network-125V-240V/dp/B06XRX2GTQ)
GPIO_KEY1, // GPIO00 Button
0, 0, 0,
GPIO_HLW_CF, // GPIO04 HLW8012 CF
GPIO_HLW_CF1, // GPIO05 HLW8012 CF1
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_HLW_SEL, // GPIO12 HLW8012 SEL
GPIO_LED1_INV, // GPIO13 Green Led
GPIO_REL1, // GPIO14 Relay
0, 0, 0
},
{ "Arilux LC01", // Arilux AL-LC01 (ESP8285) - https://www.banggood.com/nl/ARILUX-AL-LC01-Super-Mini-LED-WIFI-Smart-RGB-Controller-For-RGB-LED-Strip-Light-DC-9-12V-p-1058603.html
// (PwmFrequency 1111Hz)
GPIO_KEY1, // GPIO00 Optional Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_LED2_INV, // GPIO02 RF receiver control
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_ARIRFRCV, // GPIO04 IR or RF receiver (optional)
GPIO_PWM1, // GPIO05 RGB LED Red
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_PWM2, // GPIO12 RGB LED Green
GPIO_PWM3, // GPIO13 RGB LED Blue
GPIO_USER, // GPIO14 RGBW LED White (optional - set to PWM4 for Cold White or Warm White)
0, 0, 0
},
{ "Arilux LC11", // Arilux AL-LC11 (ESP8266) - https://www.banggood.com/nl/ARILUX-AL-LC11-Super-Mini-LED-WIFI-APP-Controller-RF-Remote-Control-For-RGBWW-LED-Strip-DC9-28V-p-1085112.html
// (PwmFrequency 540Hz)
GPIO_KEY1, // GPIO00 Optional Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_LED2_INV, // GPIO02 RF receiver control
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_PWM2, // GPIO04 RGB LED Green
GPIO_PWM1, // GPIO05 RGB LED Red
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_PWM5, // GPIO12 RGBCW LED Warm
GPIO_PWM4, // GPIO13 RGBW LED Cold
GPIO_PWM3, // GPIO14 RGB LED Blue
GPIO_ARIRFRCV, // GPIO15 RF receiver input
0, 0
},
{ "Sonoff Dual R2", // Sonoff Dual R2 (ESP8285)
GPIO_USER, // GPIO00 Button 0 on header (0 = On, 1 = Off)
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
0,
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
0,
GPIO_REL2, // GPIO05 Relay 2 (0 = Off, 1 = On)
0, 0, 0, // Flash connection
GPIO_USER, // GPIO09 Button 1 on header (0 = On, 1 = Off)
GPIO_KEY1, // GPIO10 Button on casing
0, // Flash connection
GPIO_REL1, // GPIO12 Relay 1 (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0, 0
},
{ "Arilux LC06", // Arilux AL-LC06 (ESP8285) - https://www.banggood.com/ARILUX-AL-LC06-LED-WIFI-Smartphone-Controller-Romote-5-Channels-DC12-24V-For-RGBWW-Strip-light-p-1061476.html
GPIO_KEY1, // GPIO00 Optional Button
GPIO_USER, // GPIO01 Serial RXD and Optional sensor
GPIO_USER, // GPIO02 Empty pad
GPIO_USER, // GPIO03 Serial TXD and Optional sensor
GPIO_USER, // GPIO04 W2 - PWM5
0,
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_PWM2, // GPIO12 RGB LED Green
GPIO_PWM3, // GPIO13 RGB LED Blue
GPIO_PWM1, // GPIO14 RGB LED Red
GPIO_USER, // GPIO15 RGBW LED White
0, 0
},
{ "Sonoff S31", // Sonoff S31 (ESP8266 - CSE7766)
GPIO_KEY1, // GPIO00 Button
0, // GPIO01 Serial RXD 4800 baud 8E1 CSE7766 energy sensor
0,
0, // GPIO03 Serial TXD
0, 0,
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Green Led (0 = On, 1 = Off)
0, 0, 0, 0
},
{ "Zengge WF017", // Zenggee ZJ-WF017-A (ESP12S)) - https://www.ebay.com/p/Smartphone-Android-IOS-WiFi-Music-Controller-for-RGB-5050-3528-LED-Strip-Light/534446632?_trksid=p2047675.l2644
GPIO_KEY1, // GPIO00 Optional Button
0,
GPIO_USER, // GPIO02 Empty pad
0,
GPIO_USER, // GPIO04 W2 - PWM5
0,
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_PWM2, // GPIO12 RGB LED Green
GPIO_PWM1, // GPIO13 RGB LED Red
GPIO_PWM3, // GPIO14 RGB LED Blue
0, 0, 0
},
{ "Sonoff Pow R2", // Sonoff Pow R2 (ESP8285 - CSE7766)
GPIO_KEY1, // GPIO00 Button
0, // GPIO01 Serial RXD 4800 baud 8E1 CSE7766 energy sensor
0,
0, // GPIO03 Serial TXD
0, 0,
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_REL1, // GPIO12 Red Led and Relay (0 = Off, 1 = On)
GPIO_LED1_INV, // GPIO13 Blue Led (0 = On, 1 = Off)
0, 0, 0, 0
2017-01-28 13:41:01 +00:00
}
};
/*
Optionals
{ "Xenon 3CH", // Xenon 3CH (ESP8266) - (#1128)
0, 0, 0,
GPIO_KEY2, // GPIO03 Serial TXD and Optional sensor
GPIO_REL2, // GPIO04 Relay 2
GPIO_KEY3, // GPIO05 Input 2
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_KEY1, // GPIO12 Key input
GPIO_REL1, // GPIO13 Relay 1
0,
GPIO_REL3, // GPIO15 Relay 3
0, 0
}
{ "PowStro Basic", // PowStro (ESP8266) - (#1419)
0, 0, 0, 0,
GPIO_REL1, // GPIO04 Relay (0 = Off, 1 = On)
0,
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_KEY1, // GPIO12 Button
0, 0,
GPIO_LED1, // GPIO15 Led (1 = On, 0 = Off)
0, 0
}
2018-01-07 13:56:23 +00:00
{ "SMPW701E", // SM-PW701E WLAN Socket (#1190)
0, 0, 0, 0,
GPIO_LED1_INV, // GPIO04 Blue Led (0 = On, 1 = Off)
0, // GPIO05 IR or RF receiver (optional)
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_REL1, // GPIO12 Relay and Red Led (0 = Off, 1 = On)
GPIO_KEY1, // GPIO13 Button
0, 0, 0, 0
}
{ "SWA1", // Smart Plugs (ESP8266)
0,
GPIO_USER, // GPIO01
0,
GPIO_USER, // GPIO03
GPIO_LED1_INV, // GPIO04 Blue LED
GPIO_REL1, // GPIO05 Red LED and relay
0, 0, 0, 0, 0, 0, // Flash connection
0,
GPIO_KEY1, // GPIO13 Button (normally GPIO00)
GPIO_USER, // GPIO14
0, 0, 0
}
{ "MagicHome v2.3", // Magic Home (aka Flux-light) (ESP8266) (#1353)
0, 0,
GPIO_LED1_INV, // GPIO02 Blue onboard LED
0,
GPIO_USER, // GPIO04 IR receiver (optional)
GPIO_PWM2, // GPIO05 RGB LED Green
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_PWM1, // GPIO12 RGB LED Red
GPIO_PWM3, // GPIO13 RGB LED Blue
0,
GPIO_PWM4, // GPIO15 RGBW LED White
0, 0
}
{ "Ledunia", // Ledunia (ESP8266) - http://ledunia.de/
GPIO_USER, // GPIO00 (D0)
GPIO_USER, // GPIO01 (D7) Serial RXD
GPIO_USER, // GPIO02 (D2)
GPIO_USER, // GPIO03 (D8) Serial TXD
GPIO_USER, // GPIO04 (D4) 4 x WS2812 Leds, (DOUT) Extents WS2812 string
GPIO_USER, // GPIO05 (D5) Blue Led
0, 0, 0, 0, 0, 0, // Flash connection
GPIO_USER, // GPIO12 (D12)
GPIO_USER, // GPIO13 (D13)
GPIO_USER, // GPIO14 (D14)
GPIO_USER, // GPIO15 (D15)
GPIO_USER, // GPIO16 (D16)
0 // ADC0 Analog input (A0)
},
*/
#endif // _SONOFF_TEMPLATE_H_