Tasmota/tasmota/tasmota_xnrg_energy/xnrg_14_bl09xx.ino

/*
  xnrg_14_bl09xx.ino - BL09XX energy sensor support for Tasmota

  Copyright (C) 2021  Theo Arends

  This program is free software: you can redistribute it and/or modify
  it under the terms of the GNU General Public License as published by
  the Free Software Foundation, either version 3 of the License, or
  (at your option) any later version.

  This program is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
  GNU General Public License for more details.

  You should have received a copy of the GNU General Public License
  along with this program.  If not, see <http://www.gnu.org/licenses/>.
*/

#ifdef USE_ENERGY_SENSOR
#if defined(USE_BL0940) || defined(USE_BL09XX)
#ifdef USE_BL0940
#warning **** USE_BL0940 is obsolete. Please replace with USE_BLE09XX ****
#endif
/*********************************************************************************************\
 * Support the following Shangai Belling energy sensors:
 *
 * BL0940 - Energy (as in Blitzwolf SHP10)
 * Template {"NAME":"BW-SHP10","GPIO":[0,148,0,207,158,21,0,0,0,17,0,0,0],"FLAG":0,"BASE":18}
 * Based on datasheet from http://www.belling.com.cn/media/file_object/bel_product/BL09XX/datasheet/BL09XX_V1.1_en.pdf
 *
 * BL0939 - Energy (as in Sonoff Dual R3 v2)
 * {"NAME":"Sonoff Dual R3 v2","GPIO":[32,0,0,0,0,0,0,0,0,576,225,0,0,0,0,0,0,0,0,0,0,3200,8128,224,0,0,0,0,160,161,0,0,0,0,0,0],"FLAG":0,"BASE":1}
 * Based on datasheet from https://www.belling.com.cn/product_info.html?id=368
 * See https://github.com/arendst/Tasmota/discussions/10793
 \*********************************************************************************************/

#define XNRG_14                     14

//#define DEBUG_BL09XX

#define BL0939_PREF                 713       // =(4046*1*0,51*1000)/(1,218*1,218*(390*5+0,51)) = 713,105
#define BL0939_UREF                 17159     // =(79931*0,51*1000)/(1,218*(390*5+0,51)) = 17158,92
#define BL0939_IREF                 266013    // =(324004*1)/1,218 = 266013,14

#define BL0940_PREF                 1430
#define BL0940_UREF                 33000
#define BL0940_IREF                 275000

#define BL0942_PREF                 596
#define BL0942_UREF                 15187
#define BL0942_IREF                 251213

#define BL09XX_WRITE_COMMAND        0xA0  // 0xA8 according to documentation
#define BL09XX_REG_I_FAST_RMS_CTRL  0x10
#define BL09XX_REG_MODE             0x18
#define BL09XX_REG_SOFT_RESET       0x19
#define BL09XX_REG_USR_WRPROT       0x1A
#define BL09XX_REG_TPS_CTRL         0x1B

#define BL09XX_READ_COMMAND         0x50  // 0x58 according to documentation
#define BL09XX_FULL_PACKET          0xAA

#define BL09XX_PACKET_HEADER        0x55  // 0x58 according to documentation

#include <TasmotaSerial.h>

TasmotaSerial *Bl09XXSerial = nullptr;

enum           Bl09xxModel            { BL0939_MODEL, BL0940_MODEL, BL0942_MODEL, BL09XX_MODEL };  // Model index number starting from 0
const uint32_t bl09xx_pref[]        = { BL0939_PREF,  BL0940_PREF,  BL0942_PREF  };  // Power reference constant
const uint32_t bl09xx_uref[]        = { BL0939_UREF,  BL0940_UREF,  BL0942_UREF  };  // Voltage reference constant
const uint32_t bl09xx_iref[]        = { BL0939_IREF,  BL0940_IREF,  BL0942_IREF  };  // Current reference constant
const uint8_t  bl09xx_type[]        = { 39,           40,           42           };  // Device name BL09xx
const uint8_t  bl09xx_phase_count[] = { 2,            1,            1            };  // Supported phase/channel count
const uint8_t  bl09xx_address[]     = { 0x05,         0x00,         0x08         };  // Device address
const uint8_t  bl09xx_buffer_size[] = { 35,           35,           23           };  // Serial receive buffer size
const uint8_t  bl09xx_init[5][4] = {
  { BL09XX_REG_SOFT_RESET,      0x5A, 0x5A, 0x5A },   // Reset to default
  { BL09XX_REG_USR_WRPROT,      0x55, 0x00, 0x00 },   // Enable User Operation Write
  { BL09XX_REG_MODE,            0x00, 0x10, 0x00 },   // 0x0100 = CF_UNABLE energy pulse, AC_FREQ_SEL 50Hz, RMS_UPDATE_SEL 800mS
  { BL09XX_REG_TPS_CTRL,        0xFF, 0x47, 0x00 },   // 0x47FF = Over-current and leakage alarm on, Automatic temperature measurement, Interval 100mS
  { BL09XX_REG_I_FAST_RMS_CTRL, 0x1C, 0x18, 0x00 }    // 0x181C = Half cycle, Fast RMS threshold 6172
};

struct BL09XX {
  uint32_t voltage = 0;
  uint32_t current[2] = { 0, };
  int32_t power[2] = { 0, };
  float temperature;
  uint16_t tps1 = 0;
  uint8_t *rx_buffer = nullptr;
  uint8_t buffer_size = 0;
  uint8_t byte_counter = 0;
  uint8_t address = 0;
  uint8_t model = 0;
  uint8_t rx_pin;
  bool received = false;
} Bl09XX;

bool Bl09XXDecode3940(void) {
  //  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34
  // Sample from BL0940 (single channel)
  // 55 F2 03 00 00 00 00 7E 02 00 D4 B0 72 AC 01 00 00 00 00 02 01 00 00 00 00 00 00 00 BA 01 00 FE 03 00 83
  // 55 88 02 00 49 00 00 FE 02 00 AF EF 71 D2 01 00 EB FF FF 49 01 00 00 00 00 02 00 00 CF 01 00 FE 03 00 9F
  // 55 B9 33 00 DE 45 00 94 02 00 CF E4 70 63 02 00 6C 4C 00 13 01 00 09 00 00 00 00 00 E4 01 00 FE 03 00 72
  // 55 B8 55 00 2F 73 00 D2 02 00 00 C6 74 F9 01 00 97 89 00 37 01 00 AB 00 00 2D 00 00 02 02 00 FE 03 00 6E = U 7652864, I 29487/0, P 35223/0, C 171/0, T 514
  // Hd IFRms--- Current- Reserved Voltage- Reserved Power--- Reserved CF------ Reserved TPS1---- TPS2---- Ck
  //
  // Sample from BL0939 (dual channel)
  // 55 82 03 00 00 00 00 1E 15 01 65 80 3E E5 C6 00 00 00 00 50 B1 00 00 00 00 00 00 00 F9 01 00 FE 03 00 D2 = U 4096101, I 0/70942, P 0/45392, C 0/0, T 505
  // 55 E6 02 00 00 00 00 37 15 01 0F 83 3E F4 C7 00 00 00 00 69 B1 00 00 00 00 01 00 00 FA 01 00 FE 03 00 7E = U 4096783, I 0/70967, P 0/45417, C 0/1, T 506
  // 55 29 03 00 00 00 00 27 15 01 3A 86 3E AF C8 00 00 00 00 67 B1 00 00 00 00 01 00 00 FA 01 00 FE 03 00 62 = U 4097594, I 0/70951, P 0/45415, C 0/1, T 506
  // 55 04 03 00 00 00 00 D6 14 01 7D 8E 3E 25 C7 00 00 00 00 53 B1 00 00 00 00 01 00 00 F9 01 00 FE 03 00 2E = U 4099709, I 0/70870, P 0/45395, C 0/1, T 505
  // Hd IFRms-A- CurrentA CurrentB Voltage- IFRms-B- PowerA-- PowerB-- CF-A---- CF-B---- TPS1---- TPS2---- Ck

  uint16_t tps1 = Bl09XX.rx_buffer[29] << 8 | Bl09XX.rx_buffer[28];                                      // TPS1 unsigned
  if ((Bl09XX.rx_buffer[0] != BL09XX_PACKET_HEADER) ||                                                   // Bad header
      (Bl09XX.tps1 && ((tps1 < (Bl09XX.tps1 -10)) || (tps1 > (Bl09XX.tps1 +10))))                        // Invalid temperature change
     ) {
    AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("BL9: Invalid data hd=%02X, tps1:%d"), Bl09XX.rx_buffer[0], tps1);
    return false;
  }

  Bl09XX.tps1 = tps1;
  float t = ((170.0f/448.0f)*(((float)Bl09XX.tps1/2.0f)-32.0f))-45.0f;
  Bl09XX.temperature = ConvertTemp(t);

  Bl09XX.voltage    = Bl09XX.rx_buffer[12] << 16 | Bl09XX.rx_buffer[11] << 8 | Bl09XX.rx_buffer[10];     // V_RMS unsigned
  Bl09XX.current[0] = Bl09XX.rx_buffer[6]  << 16 | Bl09XX.rx_buffer[5]  << 8 | Bl09XX.rx_buffer[4];      // IA_RMS unsigned
  Bl09XX.power[0]   = Bl09XX.rx_buffer[18] << 16 | Bl09XX.rx_buffer[17] << 8 | Bl09XX.rx_buffer[16];     // WATT_A signed
  if (bitRead(Bl09XX.power[0], 23)) { Bl09XX.power[0] |= 0xFF000000; }                                   // Extend sign bit

  if (Energy->phase_count > 1) {
    Bl09XX.current[1] = Bl09XX.rx_buffer[9]  << 16 | Bl09XX.rx_buffer[8]  << 8 | Bl09XX.rx_buffer[7];    // IB_RMS unsigned
    Bl09XX.power[1]   = Bl09XX.rx_buffer[21] << 16 | Bl09XX.rx_buffer[20] << 8 | Bl09XX.rx_buffer[19];   // WATT_B signed
    if (bitRead(Bl09XX.power[1], 23)) { Bl09XX.power[1] |= 0xFF000000; }                                 // Extend sign bit
  }

#ifdef DEBUG_BL09XX
  AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("BL9: U %d, I %d/%d, P %d/%d, T %d"),
    Bl09XX.voltage, Bl09XX.current[0], Bl09XX.current[1], Bl09XX.power[0], Bl09XX.power[1], Bl09XX.tps1);
#endif

  return true;
}

bool Bl09XXDecode42(void) {
  //  0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22
  // Hd Current- Voltage- IFRms--- Power--- CF------ Freq- 00 St 00 00 Ck
  // 55 A3 B9 00 9E 4C 36 93 43 00 F4 98 FF 99 00 00 16 4E 00 01 01 00
  // U 3558558, I 47523, P 26380, C 153
  // 55 AC B9 00 79 4D 36 C4 43 00 EF 98 FF 99 00 00 16 4E 00 01 01 00
  // U 3558777, I 47532, P 26385, C 153
  // 55 40 BA 00 2D 50 36 FE 43 00 96 98 FF 99 00 00 16 4E 00 01 01 00
  // U 3559469, I 47680, P 26474, C 153
  // 55 91 B9 00 33 4C 36 FB 43 00 FC 98 FF 99 00 00 1E 4E 00 21 01 00
  // U 3558451, I 47505, P 26372, C 153
  // 55 AF B9 00 05 51 36 D1 43 00 E4 98 FF 99 00 00 1E 4E 00 21 01 00
  // U 3559685, I 47535, P 26396, C 153
  // 55 21 BA 00 3A 5E 36 10 44 00 8B 98 FF 99 00 00 16 4E 00 01 01 00
  // U 3563066, I 47649, P 26485, C 153
  // 55 BE B9 00 B2 55 36 9D 42 00 D7 98 FF 99 00 00 1E 4E 00 21 01 00
  // U 3560882, I 47550, P 26409, C 153
  // All above from a single test with a 40W buld on 230V

  if (Bl09XX.rx_buffer[0] != BL09XX_PACKET_HEADER) {
    AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("BL9: Invalid data hd=%02X"), Bl09XX.rx_buffer[0]);
    return false;
  }

  Bl09XX.voltage    = Bl09XX.rx_buffer[6] << 16 | Bl09XX.rx_buffer[5] << 8 | Bl09XX.rx_buffer[4];        // V_RMS unsigned
  Bl09XX.current[0] = Bl09XX.rx_buffer[3]  << 16 | Bl09XX.rx_buffer[2]  << 8 | Bl09XX.rx_buffer[1];      // IA_RMS unsigned

//  Bl09XX.power[0]   = Bl09XX.rx_buffer[12] << 16 | Bl09XX.rx_buffer[11] << 8 | Bl09XX.rx_buffer[10];     // WATT_A signed
//  if (bitRead(Bl09XX.power[0], 23)) { Bl09XX.power[0] |= 0xFF000000; }                                   // Extend sign bit
  // Above reverted in favour of https://github.com/arendst/Tasmota/issues/15374#issuecomment-1105293179
  int32_t tmp = Bl09XX.rx_buffer[12] << 24 | Bl09XX.rx_buffer[11] << 16 | Bl09XX.rx_buffer[10] << 8;     // WATT_A signed
  Bl09XX.power[0] = abs(tmp >> 8);

#ifdef DEBUG_BL09XX
  AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("BL9: U %d, I %d, P %d"),
    Bl09XX.voltage, Bl09XX.current[0], Bl09XX.power[0]);
#endif

  return true;
}

void Bl09XXUpdateEnergy() {
  if (Energy->power_on) {  // Powered on
    Energy->voltage[0] = (float)Bl09XX.voltage / EnergyGetCalibration(ENERGY_VOLTAGE_CALIBRATION);
    Energy->voltage[1] = Energy->voltage[0];
#ifdef DEBUG_BL09XX
    AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("BL9: U %2_f, T %2_f"), &Energy->voltage[0], &Bl09XX.temperature);
#endif
    for (uint32_t chan = 0; chan < Energy->phase_count; chan++) {
      uint32_t power_calibration = EnergyGetCalibration(ENERGY_POWER_CALIBRATION, chan);
      uint32_t current_calibration = EnergyGetCalibration(ENERGY_CURRENT_CALIBRATION, chan);
      if (Bl09XX.power[chan] > power_calibration) {                                     // We need at least 1W
        Energy->active_power[chan] = (float)Bl09XX.power[chan] / power_calibration;
        Energy->current[chan] = (float)Bl09XX.current[chan] / current_calibration;
      } else {
        Energy->active_power[chan] = 0;
        Energy->current[chan] = 0;
      }
#ifdef DEBUG_BL09XX
      AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("BL9: Chan[%d] I %2_f, P %2_f"), chan, &Energy->current[chan], &Energy->active_power[chan]);
#endif
    }
  } else {  // Powered off
    Energy->voltage[0] = 0;
    Energy->voltage[1] = 0;
    Energy->active_power[0] = Energy->active_power[1] = 0;
    Energy->current[0] = Energy->current[1] = 0;
  }
}

void Bl09XXSerialInput(void) {
  while (Bl09XXSerial->available()) {
    yield();
    uint8_t serial_in_byte = Bl09XXSerial->read();
    if (!Bl09XX.received && (BL09XX_PACKET_HEADER == serial_in_byte)) {
      Bl09XX.received = true;
      Bl09XX.byte_counter = 0;
    }
    if (Bl09XX.received) {
      Bl09XX.rx_buffer[Bl09XX.byte_counter++] = serial_in_byte;
      if (Bl09XX.buffer_size == Bl09XX.byte_counter) {
        AddLog(LOG_LEVEL_DEBUG_MORE, PSTR("BL9: Rx %*_H"), Bl09XX.buffer_size, Bl09XX.rx_buffer);
        uint8_t checksum = BL09XX_READ_COMMAND | Bl09XX.address;
        for (uint32_t i = 0; i < Bl09XX.buffer_size -1; i++) { checksum += Bl09XX.rx_buffer[i]; }
        checksum ^= 0xFF;
        if (checksum == Bl09XX.rx_buffer[Bl09XX.buffer_size -1]) {
          Energy->data_valid[0] = 0;
          bool ok;
          if (BL0942_MODEL == Bl09XX.model) {
            ok = Bl09XXDecode42();
          } else {
            ok = Bl09XXDecode3940();
          }
          if (ok) { Bl09XXUpdateEnergy(); }
          Bl09XX.received = false;
          return;
        } else {
#ifdef DEBUG_BL09XX
          AddLog(LOG_LEVEL_DEBUG, PSTR("BL9: " D_CHECKSUM_FAILURE " received 0x%02X instead of 0x%02X"), Bl09XX.rx_buffer[Bl09XX.buffer_size -1], checksum);
#endif
          do {  // Sync buffer with data (issue #1907 and #3425)
            memmove(Bl09XX.rx_buffer, Bl09XX.rx_buffer +1, Bl09XX.buffer_size -1);
            Bl09XX.byte_counter--;
          } while ((Bl09XX.byte_counter > 1) && (BL09XX_PACKET_HEADER != Bl09XX.rx_buffer[0]));
          if (BL09XX_PACKET_HEADER != Bl09XX.rx_buffer[0]) {
            AddLog(LOG_LEVEL_DEBUG, PSTR("BL9: " D_CHECKSUM_FAILURE));
            Bl09XX.received = false;
            Bl09XX.byte_counter = 0;
          }
        }
      }
    }
  }
}

/********************************************************************************************/

void Bl09XXEverySecond(void) {
  if (Energy->data_valid[0] > ENERGY_WATCHDOG) {
    Bl09XX.voltage = 0;
    memset(Bl09XX.current, 0, sizeof(Bl09XX.current));
    memset(Bl09XX.power, 0, sizeof(Bl09XX.power));
  } else {
    // Calculate energy by using active power
    for (uint32_t channel = 0; channel < Energy->phase_count; channel++) {
      Energy->kWhtoday_delta[channel] += Energy->active_power[channel] * 1000 / 36;
    }
    EnergyUpdateToday();
  }

//  AddLog(LOG_LEVEL_DEBUG, PSTR("BL9: Poll"));

  Bl09XXSerial->flush();
  Bl09XXSerial->write(BL09XX_READ_COMMAND | Bl09XX.address);
  Bl09XXSerial->write(BL09XX_FULL_PACKET);
}

void Bl09XXInit(void) {
  // Software serial init needs to be done here as earlier (serial) interrupts may lead to Exceptions
  Bl09XXSerial = new TasmotaSerial(Bl09XX.rx_pin, Pin(GPIO_TXD), 1);
  if (Bl09XXSerial->begin(4800)) {
    if (Bl09XXSerial->hardwareSerial()) {
      ClaimSerial();
    }
    if (HLW_UREF_PULSE == EnergyGetCalibration(ENERGY_VOLTAGE_CALIBRATION)) {
      for (uint32_t i = 0; i < 2; i++) {
        EnergySetCalibration(ENERGY_POWER_CALIBRATION, bl09xx_pref[Bl09XX.model], i);
        EnergySetCalibration(ENERGY_VOLTAGE_CALIBRATION, bl09xx_uref[Bl09XX.model], i);
        EnergySetCalibration(ENERGY_CURRENT_CALIBRATION, bl09xx_iref[Bl09XX.model], i);
      }
    }
    if ((BL0940_MODEL == Bl09XX.model) && (EnergyGetCalibration(ENERGY_CURRENT_CALIBRATION) < (BL0940_IREF / 20))) {
      uint32_t current_calibration = EnergyGetCalibration(ENERGY_CURRENT_CALIBRATION) * 100;
      EnergySetCalibration(ENERGY_CURRENT_CALIBRATION, current_calibration);
    }

    if (BL0942_MODEL != Bl09XX.model) {
#ifdef DEBUG_BL09XX
      AddLog(LOG_LEVEL_DEBUG, PSTR("BL9: Send Init string"));
#endif
      Energy->use_overtemp = true;                 // Use global temperature for overtemp detection
      for (uint32_t i = 0; i < 5; i++) {
        uint8_t crc, byte;
        crc = byte = BL09XX_WRITE_COMMAND | Bl09XX.address;
        Bl09XXSerial->write(byte);
        for (uint32_t j = 0; j < 4; j++) {
          crc += byte = bl09xx_init[i][j];
          Bl09XXSerial->write(byte);
        }
        Bl09XXSerial->write(0xFF ^ crc);
        delay(1);
      }
    } else {
      Energy->use_overtemp = false;                 // Use global temperature for overtemp detection
    }
  } else {
    TasmotaGlobal.energy_driver = ENERGY_NONE;
  }
}

void Bl09XXPreInit(void) {
  if (PinUsed(GPIO_TXD)) {
    Bl09XX.model = BL09XX_MODEL;
    if (PinUsed(GPIO_BL0939_RX)) {
      Bl09XX.model = BL0939_MODEL;
      Bl09XX.rx_pin = Pin(GPIO_BL0939_RX);
    }
    else if (PinUsed(GPIO_BL0940_RX)) {
      Bl09XX.model = BL0940_MODEL;
      Bl09XX.rx_pin = Pin(GPIO_BL0940_RX);
    }
    else if (PinUsed(GPIO_BL0942_RX)) {
      Bl09XX.model = BL0942_MODEL;
      Bl09XX.rx_pin = Pin(GPIO_BL0942_RX);
    }
    if (Bl09XX.model != BL09XX_MODEL) {
      Bl09XX.address = bl09xx_address[Bl09XX.model];
      Bl09XX.buffer_size = bl09xx_buffer_size[Bl09XX.model];
      Bl09XX.rx_buffer = (uint8_t*)(malloc(Bl09XX.buffer_size));
      if (Bl09XX.rx_buffer != nullptr) {
        Energy->voltage_common = true;               // Use common voltage
        Energy->frequency_common = true;             // Use common frequency
        Energy->use_overtemp = true;                 // Use global temperature for overtemp detection
        Energy->phase_count = bl09xx_phase_count[Bl09XX.model];  // Handle two channels as two phases
        TasmotaGlobal.energy_driver = XNRG_14;
        AddLog(LOG_LEVEL_DEBUG,PSTR("BL9: Enabling BL09%02d"), bl09xx_type[Bl09XX.model]);
      }
    }
  }
}

bool Bl09XXCommand(void) {
  bool serviced = true;

  uint32_t channel = (2 == XdrvMailbox.index) && (Energy->phase_count > 1) ? 1 : 0;
  uint32_t value = (uint32_t)(CharToFloat(XdrvMailbox.data) * 100);  // 1.23 = 123

  if (CMND_POWERSET == Energy->command_code) {
    if (XdrvMailbox.data_len && Bl09XX.power[channel]) {
      XdrvMailbox.payload = (Bl09XX.power[channel] * 100) / value;
    }
  }
  else if (CMND_VOLTAGESET == Energy->command_code) {
    if (XdrvMailbox.data_len && Bl09XX.voltage) {
      XdrvMailbox.payload = (Bl09XX.voltage * 100) / value;
    }
  }
  else if (CMND_CURRENTSET == Energy->command_code) {
    if (XdrvMailbox.data_len && Bl09XX.current[channel]) {
      XdrvMailbox.payload = (Bl09XX.current[channel] * 100) / value;
    }
  }
  else serviced = false;  // Unknown command

  return serviced;
}

void Bl09XXShow(bool json) {
  if (BL0942_MODEL != Bl09XX.model) {
    if (json) {
      ResponseAppend_P(JSON_SNS_F_TEMP, "BL09XX", Settings->flag2.temperature_resolution, &Bl09XX.temperature);
      if (0 == TasmotaGlobal.tele_period) {
#ifdef USE_DOMOTICZ
        DomoticzFloatSensor(DZ_TEMP, Bl09XX.temperature);
#endif  // USE_DOMOTICZ
#ifdef USE_KNX
        KnxSensor(KNX_TEMPERATURE, Bl09XX.temperature);
#endif // USE_KNX
      }
#ifdef USE_WEBSERVER
    } else {
      WSContentSend_Temp("", Bl09XX.temperature);
#endif  // USE_WEBSERVER
    }
  }
}

/*********************************************************************************************\
 * Interface
\*********************************************************************************************/

bool Xnrg14(uint32_t function) {
  bool result = false;

  switch (function) {
    case FUNC_LOOP:
      if (Bl09XXSerial) { Bl09XXSerialInput(); }
      break;
    case FUNC_EVERY_SECOND:
      Bl09XXEverySecond();
      break;
    case FUNC_JSON_APPEND:
      Bl09XXShow(1);
      break;
#ifdef USE_WEBSERVER
    case FUNC_WEB_SENSOR:
      Bl09XXShow(0);
      break;
#endif  // USE_WEBSERVER
    case FUNC_COMMAND:
      result = Bl09XXCommand();
      break;
    case FUNC_INIT:
      Bl09XXInit();
      break;
    case FUNC_PRE_INIT:
      Bl09XXPreInit();
      break;
  }
  return result;
}

#endif  // USE_BL09XX
#endif  // USE_ENERGY_SENSOR