Tasmota/sonoff/xdrv_05_irremote.ino

697 lines
22 KiB
Arduino
Raw Normal View History

/*
xdrv_05_irremote.ino - infra red support for Sonoff-Tasmota
Copyright (C) 2018 Heiko Krupp, Lazar Obradovic and Theo Arends
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#ifdef USE_IR_REMOTE
/*********************************************************************************************\
* IR Remote send and receive using IRremoteESP8266 library
\*********************************************************************************************/
#define XDRV_05 5
#include <IRremoteESP8266.h>
// Based on IRremoteESP8266.h enum decode_type_t
const char kIrRemoteProtocols[] PROGMEM =
"UNKNOWN|RC5|RC6|NEC|SONY|PANASONIC|JVC|SAMSUNG|WHYNTER|AIWA_RC_T501|LG|SANYO|MITSUBISHI|DISH|SHARP";
#ifdef USE_IR_HVAC
#include <ir_Mitsubishi.h>
2018-11-19 18:39:44 +00:00
#include <ir_Fujitsu.h>
// HVAC TOSHIBA_
#define HVAC_TOSHIBA_HDR_MARK 4400
#define HVAC_TOSHIBA_HDR_SPACE 4300
#define HVAC_TOSHIBA_BIT_MARK 543
#define HVAC_TOSHIBA_ONE_SPACE 1623
#define HVAC_MISTUBISHI_ZERO_SPACE 472
#define HVAC_TOSHIBA_RPT_MARK 440
#define HVAC_TOSHIBA_RPT_SPACE 7048 // Above original iremote limit
#define HVAC_TOSHIBA_DATALEN 9
2018-11-18 09:35:53 +00:00
// HVAC LG
#define HVAC_LG_DATALEN 7
IRMitsubishiAC *mitsubir = NULL;
const char kFanSpeedOptions[] = "A12345S";
const char kHvacModeOptions[] = "HDCA";
#endif
/*********************************************************************************************\
* IR Send
\*********************************************************************************************/
#include <IRsend.h>
IRsend *irsend = NULL;
void IrSendInit(void)
{
irsend = new IRsend(pin[GPIO_IRSEND]); // an IR led is at GPIO_IRSEND
irsend->begin();
#ifdef USE_IR_HVAC
mitsubir = new IRMitsubishiAC(pin[GPIO_IRSEND]);
#endif //USE_IR_HVAC
}
#ifdef USE_IR_RECEIVE
/*********************************************************************************************\
* IR Receive
\*********************************************************************************************/
#define IR_RCV_SAVE_BUFFER 0 // 0 = do not use buffer, 1 = use buffer for decoding
#define IR_TIME_AVOID_DUPLICATE 500 // Milliseconds
#include <IRrecv.h>
IRrecv *irrecv = NULL;
unsigned long ir_lasttime = 0;
void IrReceiveInit(void)
{
// an IR led is at GPIO_IRRECV
irrecv = new IRrecv(pin[GPIO_IRRECV], IR_RCV_BUFFER_SIZE, IR_RCV_TIMEOUT, IR_RCV_SAVE_BUFFER);
irrecv->setUnknownThreshold(IR_RCV_MIN_UNKNOWN_SIZE);
irrecv->enableIRIn(); // Start the receiver
// AddLog_P(LOG_LEVEL_DEBUG, PSTR("IrReceive initialized"));
}
2018-11-14 13:32:09 +00:00
void IrReceiveCheck(void)
{
char sirtype[14]; // Max is AIWA_RC_T501
char stemp[16];
int8_t iridx = 0;
decode_results results;
if (irrecv->decode(&results)) {
snprintf_P(log_data, sizeof(log_data), PSTR(D_LOG_IRR "RawLen %d, Overflow %d, Bits %d, Value %08X, Decode %d"),
results.rawlen, results.overflow, results.bits, results.value, results.decode_type);
AddLog(LOG_LEVEL_DEBUG);
unsigned long now = millis();
// if ((now - ir_lasttime > IR_TIME_AVOID_DUPLICATE) && (UNKNOWN != results.decode_type) && (results.bits > 0)) {
if (now - ir_lasttime > IR_TIME_AVOID_DUPLICATE) {
ir_lasttime = now;
iridx = results.decode_type;
if ((iridx < 0) || (iridx > 14)) {
iridx = 0; // UNKNOWN
}
if (Settings.flag.ir_receive_decimal) {
snprintf_P(stemp, sizeof(stemp), PSTR("%u"), (uint32_t)results.value);
} else {
snprintf_P(stemp, sizeof(stemp), PSTR("\"%lX\""), (uint32_t)results.value);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_JSON_IRRECEIVED "\":{\"" D_JSON_IR_PROTOCOL "\":\"%s\",\"" D_JSON_IR_BITS "\":%d,\"" D_JSON_IR_DATA "\":%s"),
GetTextIndexed(sirtype, sizeof(sirtype), iridx, kIrRemoteProtocols), results.bits, stemp);
if (Settings.flag3.receive_raw) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,\"" D_JSON_IR_RAWDATA "\":["), mqtt_data);
uint16_t i;
for (i = 1; i < results.rawlen; i++) {
if (i > 1) { snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s,"), mqtt_data); }
uint32_t usecs;
for (usecs = results.rawbuf[i] * kRawTick; usecs > UINT16_MAX; usecs -= UINT16_MAX) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s%d,0,"), mqtt_data, UINT16_MAX);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s%d"), mqtt_data, usecs);
if (strlen(mqtt_data) > sizeof(mqtt_data) - 40) { break; } // Quit if char string becomes too long
}
uint16_t extended_length = results.rawlen - 1;
for (uint16_t j = 0; j < results.rawlen - 1; j++) {
uint32_t usecs = results.rawbuf[j] * kRawTick;
// Add two extra entries for multiple larger than UINT16_MAX it is.
extended_length += (usecs / (UINT16_MAX + 1)) * 2;
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s],\"" D_JSON_IR_RAWDATA "Info\":[%d,%d,%d]"), mqtt_data, extended_length, i -1, results.overflow);
}
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("%s}}"), mqtt_data);
MqttPublishPrefixTopic_P(RESULT_OR_TELE, PSTR(D_JSON_IRRECEIVED));
if (iridx) {
XdrvRulesProcess();
#ifdef USE_DOMOTICZ
unsigned long value = results.value | (iridx << 28); // [Protocol:4, Data:28]
DomoticzSensor(DZ_COUNT, value); // Send data as Domoticz Counter value
#endif // USE_DOMOTICZ
}
}
irrecv->resume();
}
}
#endif // USE_IR_RECEIVE
#ifdef USE_IR_HVAC
2018-11-19 18:39:44 +00:00
/********************************************************************************************* \
* IR Heating, Ventilation and Air Conditioning using IRMitsubishiAC library
\*********************************************************************************************/
/*******************
2018-11-18 09:35:53 +00:00
TOSHIBA
********************/
boolean IrHvacToshiba(const char *HVAC_Mode, const char *HVAC_FanMode, boolean HVAC_Power, int HVAC_Temp)
{
uint16_t rawdata[2 + 2 * 8 * HVAC_TOSHIBA_DATALEN + 2];
byte data[HVAC_TOSHIBA_DATALEN] = {0xF2, 0x0D, 0x03, 0xFC, 0x01, 0x00, 0x00, 0x00, 0x00};
char *p;
uint8_t mode;
if (HVAC_Mode == NULL) {
p = (char *)kHvacModeOptions; // default HVAC_HOT
}
else {
p = strchr(kHvacModeOptions, toupper(HVAC_Mode[0]));
}
if (!p) {
return true;
}
data[6] = (p - kHvacModeOptions) ^ 0x03; // HOT = 0x03, DRY = 0x02, COOL = 0x01, AUTO = 0x00
if (!HVAC_Power) {
data[6] = (byte)0x07; // Turn OFF HVAC
}
if (HVAC_FanMode == NULL) {
p = (char *)kFanSpeedOptions; // default FAN_SPEED_AUTO
}
else {
p = strchr(kFanSpeedOptions, toupper(HVAC_FanMode[0]));
}
if (!p) {
return true;
}
mode = p - kFanSpeedOptions + 1;
if ((1 == mode) || (7 == mode)) {
mode = 0;
}
mode = mode << 5; // AUTO = 0x00, SPEED = 0x40, 0x60, 0x80, 0xA0, 0xC0, SILENT = 0x00
data[6] = data[6] | mode;
byte Temp;
if (HVAC_Temp > 30) {
Temp = 30;
}
else if (HVAC_Temp < 17) {
Temp = 17;
}
else {
Temp = HVAC_Temp;
}
data[5] = (byte)(Temp - 17) << 4;
data[HVAC_TOSHIBA_DATALEN - 1] = 0;
for (int x = 0; x < HVAC_TOSHIBA_DATALEN - 1; x++) {
data[HVAC_TOSHIBA_DATALEN - 1] = (byte)data[x] ^ data[HVAC_TOSHIBA_DATALEN - 1]; // CRC is a simple bits addition
}
int i = 0;
byte mask = 1;
//header
rawdata[i++] = HVAC_TOSHIBA_HDR_MARK;
rawdata[i++] = HVAC_TOSHIBA_HDR_SPACE;
//data
for (int b = 0; b < HVAC_TOSHIBA_DATALEN; b++) {
for (mask = B10000000; mask > 0; mask >>= 1) { //iterate through bit mask
if (data[b] & mask) { // Bit ONE
rawdata[i++] = HVAC_TOSHIBA_BIT_MARK;
rawdata[i++] = HVAC_TOSHIBA_ONE_SPACE;
}
else { // Bit ZERO
rawdata[i++] = HVAC_TOSHIBA_BIT_MARK;
rawdata[i++] = HVAC_MISTUBISHI_ZERO_SPACE;
}
}
}
//trailer
rawdata[i++] = HVAC_TOSHIBA_RPT_MARK;
rawdata[i++] = HVAC_TOSHIBA_RPT_SPACE;
noInterrupts();
irsend->sendRaw(rawdata, i, 38);
irsend->sendRaw(rawdata, i, 38);
interrupts();
return false;
}
2018-11-18 09:35:53 +00:00
/*******************
2018-11-18 09:35:53 +00:00
MITSUBISHI
********************/
boolean IrHvacMitsubishi(const char *HVAC_Mode, const char *HVAC_FanMode, boolean HVAC_Power, int HVAC_Temp)
{
char *p;
uint8_t mode;
mitsubir->stateReset();
if (HVAC_Mode == NULL) {
p = (char *)kHvacModeOptions; // default HVAC_HOT
}
else {
p = strchr(kHvacModeOptions, toupper(HVAC_Mode[0]));
}
if (!p) {
return true;
}
mode = (p - kHvacModeOptions + 1) << 3; // HOT = 0x08, DRY = 0x10, COOL = 0x18, AUTO = 0x20
mitsubir->setMode(mode);
2017-08-16 16:05:36 +01:00
mitsubir->setPower(HVAC_Power);
if (HVAC_FanMode == NULL) {
p = (char *)kFanSpeedOptions; // default FAN_SPEED_AUTO
}
else {
p = strchr(kFanSpeedOptions, toupper(HVAC_FanMode[0]));
}
if (!p) {
return true;
}
mode = p - kFanSpeedOptions; // AUTO = 0, SPEED = 1 .. 5, SILENT = 6
mitsubir->setFan(mode);
mitsubir->setTemp(HVAC_Temp);
mitsubir->setVane(MITSUBISHI_AC_VANE_AUTO);
mitsubir->send();
// snprintf_P(log_data, sizeof(log_data), PSTR("IRHVAC: Mitsubishi Power %d, Mode %d, FanSpeed %d, Temp %d, VaneMode %d"),
// mitsubir->getPower(), mitsubir->getMode(), mitsubir->getFan(), mitsubir->getTemp(), mitsubir->getVane());
// AddLog(LOG_LEVEL_DEBUG);
return false;
}
2018-11-18 09:35:53 +00:00
/*******************
2018-11-18 09:35:53 +00:00
LG
********************/
boolean IrHvacLG(const char *HVAC_Mode, const char *HVAC_FanMode, boolean HVAC_Power, int HVAC_Temp)
{
uint32_t LG_Code;
byte data[HVAC_LG_DATALEN];
static boolean hvacOn = false;
char *p;
uint8_t mode;
byte Temp;
// Constant data
data[0] = 0x08;
data[1] = 0x08;
data[2] = 0x00;
if (!HVAC_Power) {
data[2] = (byte)0x0C; // Turn OFF HVAC, code 0x88C0051
data[3] = (byte)0x00;
data[4] = (byte)0x00;
data[5] = (byte)0x05;
data[6] = (byte)0x01;
2018-11-18 09:35:53 +00:00
hvacOn = false;
}
else {
2018-11-18 09:35:53 +00:00
// Set code for HVAC Mode - data[3]
if (HVAC_Mode == NULL) {
p = (char *)kHvacModeOptions; // default HVAC_HOT
}
else {
p = strchr(kHvacModeOptions, toupper(HVAC_Mode[0]));
2018-11-18 09:35:53 +00:00
}
if (!p) {
return true;
}
mode = (p - kHvacModeOptions) ^ 0x03; // HOT = 0x03, DRY = 0x02, COOL = 0x01, AUTO = 0x00
switch (mode) {
case 0: // AUTO
data[3] = 11;
break;
case 1: // COOL
data[3] = 8;
break;
case 2: // DRY
data[3] = 9;
break;
case 3: // HOT
data[3] = 12;
break;
2018-11-18 09:35:53 +00:00
}
if (!hvacOn) {
data[3] = data[3] & 7; // reset bit3
hvacOn = true;
}
2018-11-18 09:35:53 +00:00
snprintf_P(log_data, sizeof(log_data), PSTR("IRHVAC: HvacMode %s, ModeVal %d, Code %d"), p, mode, data[3]);
AddLog(LOG_LEVEL_DEBUG);
2018-11-18 09:35:53 +00:00
// Set code for HVAC temperature - data[4]
if (HVAC_Temp > 30) {
Temp = 30;
}
else if (HVAC_Temp < 18) {
Temp = 18;
}
else {
Temp = HVAC_Temp;
}
data[4] = (byte)(Temp - 15);
// Set code for HVAC fan mode - data[5]
if (HVAC_FanMode == NULL) {
p = (char *)kFanSpeedOptions; // default FAN_SPEED_AUTO
}
else {
p = strchr(kFanSpeedOptions, toupper(HVAC_FanMode[0]));
}
if (!p) {
return true;
}
mode = p - kFanSpeedOptions;
if ((mode == 0) || (mode > 3)) {
data[5] = 5; // Auto = 0x05
}
else {
data[5] = (mode * 2) - 2; // Low = 0x00, Mid = 0x02, High = 0x04
}
2018-11-18 09:35:53 +00:00
snprintf_P(log_data, sizeof(log_data), PSTR("IRHVAC: FanMode %s, ModeVal %d, Code %d"), p, mode, data[5]);
AddLog(LOG_LEVEL_DEBUG);
// Set CRC code - data[6]
data[6] = (data[3] + data[4] + data[5]) & 0x0f; // CRC
}
2018-11-18 09:35:53 +00:00
// Build LG IR code
LG_Code = data[0] << 4;
for (int i = 1; i < 6; i++) {
LG_Code = (LG_Code + data[i]) << 4;
}
LG_Code = LG_Code + data[6];
snprintf_P(log_data, sizeof(log_data), PSTR("IRHVAC: LG_Code %d"), LG_Code);
AddLog(LOG_LEVEL_DEBUG);
// Send LG IR Code
2018-11-18 09:35:53 +00:00
noInterrupts();
irsend->sendLG(LG_Code, 28);
interrupts();
2018-11-18 09:35:53 +00:00
return false;
}
/*******************
Fujitsu
********************/
boolean IrHvacFujitsu(const char *HVAC_Mode, const char *HVAC_FanMode, boolean HVAC_Power, int HVAC_Temp)
{
const char kFujitsuHvacModeOptions[] = "HDCAF";
char stemp[64];
snprintf_P(stemp, sizeof(stemp), PSTR("FUJITSU: mode:%s, fan:%s, power:%u, temp:%u"), HVAC_Mode, HVAC_FanMode, HVAC_Power, HVAC_Temp);
IRFujitsuAC ac(pin[GPIO_IRSEND]);
if (0 == HVAC_Power) {
ac.off();
ac.send();
return false;
}
byte modes[5] = {FUJITSU_AC_MODE_HEAT, FUJITSU_AC_MODE_DRY, FUJITSU_AC_MODE_COOL, FUJITSU_AC_MODE_AUTO, FUJITSU_AC_MODE_FAN};
byte fanModes[7] = {FUJITSU_AC_FAN_AUTO, FUJITSU_AC_FAN_LOW, FUJITSU_AC_FAN_MED, FUJITSU_AC_FAN_HIGH, FUJITSU_AC_FAN_HIGH, FUJITSU_AC_FAN_HIGH, FUJITSU_AC_FAN_QUIET};
ac.setCmd(FUJITSU_AC_CMD_TURN_ON);
ac.setSwing(FUJITSU_AC_SWING_VERT);
char *p;
if (NULL == HVAC_Mode) {
p = (char *)kFujitsuHvacModeOptions;
}
else {
p = strchr(kFujitsuHvacModeOptions, toupper(HVAC_Mode[0]));
}
if (!p) {
return true;
}
ac.setMode(modes[p - kFujitsuHvacModeOptions]);
if (HVAC_FanMode == NULL) {
p = (char *)kFanSpeedOptions; // default FAN_SPEED_AUTO
}
else {
p = strchr(kFanSpeedOptions, toupper(HVAC_FanMode[0]));
}
if (!p) {
return true;
}
ac.setFanSpeed(fanModes[p - kFanSpeedOptions]);
ac.setTemp(HVAC_Temp);
ac.send();
return false;
}
#endif // USE_IR_HVAC
/*********************************************************************************************\
* Commands
\*********************************************************************************************/
/*
* ArduinoJSON entry used to calculate jsonBuf: JSON_OBJECT_SIZE(3) + 40 = 96
IRsend:
{ "protocol": "SAMSUNG", "bits": 32, "data": 551502015 }
IRhvac:
{ "Vendor": "<Toshiba|Mitsubishi>", "Power": <0|1>, "Mode": "<Hot|Cold|Dry|Auto>", "FanSpeed": "<1|2|3|4|5|Auto|Silence>", "Temp": <17..30> }
*/
2018-11-14 13:32:09 +00:00
boolean IrSendCommand(void)
{
boolean serviced = true;
boolean error = false;
char protocol_text[20];
const char *protocol;
uint32_t bits = 0;
uint32_t data = 0;
char dataBufUc[XdrvMailbox.data_len];
UpperCase(dataBufUc, XdrvMailbox.data);
if (!strcasecmp_P(XdrvMailbox.topic, PSTR(D_CMND_IRSEND))) {
if (XdrvMailbox.data_len) {
StaticJsonBuffer<128> jsonBuf;
JsonObject &root = jsonBuf.parseObject(dataBufUc);
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_JSON_DONE "\"}"));
if (!root.success()) {
// IRSend frequency, rawdata, rawdata ...
char *p;
char *str = strtok_r(XdrvMailbox.data, ", ", &p);
uint16_t freq = atoi(str);
if (!freq) { freq = 38000; } // Default to 38kHz
uint16_t count = 0;
char *q = p;
for (; *q; count += (*q++ == ','));
if (count) { // At least two raw data values
count++;
uint16_t* raw_array = NULL;
raw_array = reinterpret_cast<uint16_t*>(malloc(count * sizeof(uint16_t)));
if (raw_array != NULL) {
byte i = 0;
for (str = strtok_r(NULL, ", ", &p); str && i < count; str = strtok_r(NULL, ", ", &p)) {
raw_array[i++] = strtoul(str, NULL, 0); // Allow decimal (5246996) and hexadecimal (0x501014) input
}
// snprintf_P(log_data, sizeof(log_data), PSTR("IRS: Count %d, Freq %d, Arr[0] %d, Arr[count -1] %d"),
// count, freq, raw_array[0], raw_array[count -1]);
// AddLog(LOG_LEVEL_DEBUG);
irsend->sendRaw(raw_array, count, freq);
free(raw_array);
if (!count) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_JSON_FAILED "\"}")); // JSON decode failed and invalid RawData
}
}
else {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_JSON_NO_BUFFER_SPACE "\"}")); // JSON decode failed and invalid RawData
}
}
else {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_JSON_INVALID_RAWDATA "\"}")); // JSON decode failed and invalid RawData
}
}
else {
// IRsend { "protocol": "SAMSUNG", "bits": 32, "data": 551502015 }
char parm_uc[10];
protocol = root[UpperCase_P(parm_uc, PSTR(D_JSON_IR_PROTOCOL))];
bits = root[UpperCase_P(parm_uc, PSTR(D_JSON_IR_BITS))];
data = strtoul(root[UpperCase_P(parm_uc, PSTR(D_JSON_IR_DATA))], NULL, 0);
if (protocol && bits) {
int protocol_code = GetCommandCode(protocol_text, sizeof(protocol_text), protocol, kIrRemoteProtocols);
snprintf_P(log_data, sizeof(log_data), PSTR("IRS: protocol_text %s, protocol %s, bits %d, data %u (0x%lX), protocol_code %d"),
protocol_text, protocol, bits, data, data, protocol_code);
AddLog(LOG_LEVEL_DEBUG);
switch (protocol_code) {
case NEC:
irsend->sendNEC(data, (bits > NEC_BITS) ? NEC_BITS : bits); break;
case SONY:
irsend->sendSony(data, (bits > SONY_20_BITS) ? SONY_20_BITS : bits, 2); break;
case RC5:
irsend->sendRC5(data, bits); break;
case RC6:
irsend->sendRC6(data, bits); break;
case DISH:
irsend->sendDISH(data, (bits > DISH_BITS) ? DISH_BITS : bits); break;
case JVC:
irsend->sendJVC(data, (bits > JVC_BITS) ? JVC_BITS : bits, 1); break;
case SAMSUNG:
irsend->sendSAMSUNG(data, (bits > SAMSUNG_BITS) ? SAMSUNG_BITS : bits); break;
case PANASONIC:
irsend->sendPanasonic(bits, data); break;
default:
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_JSON_PROTOCOL_NOT_SUPPORTED "\"}"));
}
}
else {
error = true;
}
}
}
else {
error = true;
}
if (error) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRSEND "\":\"" D_JSON_NO " " D_JSON_IR_PROTOCOL ", " D_JSON_IR_BITS " " D_JSON_OR " " D_JSON_IR_DATA "\"}"));
}
}
#ifdef USE_IR_HVAC
else if (!strcasecmp_P(XdrvMailbox.topic, PSTR(D_CMND_IRHVAC))) {
const char *HVAC_Mode;
const char *HVAC_FanMode;
const char *HVAC_Vendor;
int HVAC_Temp = 21;
boolean HVAC_Power = true;
if (XdrvMailbox.data_len) {
StaticJsonBuffer<164> jsonBufer;
JsonObject &root = jsonBufer.parseObject(dataBufUc);
if (!root.success()) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRHVAC "\":\"" D_JSON_INVALID_JSON "\"}")); // JSON decode failed
}
else {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRHVAC "\":\"" D_JSON_DONE "\"}"));
HVAC_Vendor = root[D_JSON_IRHVAC_VENDOR];
HVAC_Power = root[D_JSON_IRHVAC_POWER];
HVAC_Mode = root[D_JSON_IRHVAC_MODE];
HVAC_FanMode = root[D_JSON_IRHVAC_FANSPEED];
HVAC_Temp = root[D_JSON_IRHVAC_TEMP];
// snprintf_P(log_data, sizeof(log_data), PSTR("IRHVAC: Received Vendor %s, Power %d, Mode %s, FanSpeed %s, Temp %d"),
// HVAC_Vendor, HVAC_Power, HVAC_Mode, HVAC_FanMode, HVAC_Temp);
// AddLog(LOG_LEVEL_DEBUG);
if (HVAC_Vendor == NULL || !strcasecmp_P(HVAC_Vendor, PSTR("TOSHIBA"))) {
error = IrHvacToshiba(HVAC_Mode, HVAC_FanMode, HVAC_Power, HVAC_Temp);
}
else if (!strcasecmp_P(HVAC_Vendor, PSTR("MITSUBISHI"))) {
error = IrHvacMitsubishi(HVAC_Mode, HVAC_FanMode, HVAC_Power, HVAC_Temp);
}
2018-11-18 09:35:53 +00:00
else if (!strcasecmp_P(HVAC_Vendor, PSTR("LG"))) {
error = IrHvacLG(HVAC_Mode, HVAC_FanMode, HVAC_Power, HVAC_Temp);
}
2018-11-19 18:39:44 +00:00
else if (!strcasecmp_P(HVAC_Vendor, PSTR("FUJITSU"))) {
error = IrHvacFujitsu(HVAC_Mode, HVAC_FanMode, HVAC_Power, HVAC_Temp);
2018-11-18 09:35:53 +00:00
}
else {
error = true;
}
}
}
else {
error = true;
}
if (error) {
snprintf_P(mqtt_data, sizeof(mqtt_data), PSTR("{\"" D_CMND_IRHVAC "\":\"" D_JSON_WRONG " " D_JSON_IRHVAC_VENDOR ", " D_JSON_IRHVAC_MODE " " D_JSON_OR " " D_JSON_IRHVAC_FANSPEED "\"}"));
}
}
#endif // USE_IR_HVAC
else serviced = false; // Unknown command
return serviced;
}
/*********************************************************************************************\
* Interface
\*********************************************************************************************/
boolean Xdrv05(byte function)
{
boolean result = false;
if ((pin[GPIO_IRSEND] < 99) || (pin[GPIO_IRRECV] < 99)) {
switch (function) {
case FUNC_PRE_INIT:
if (pin[GPIO_IRSEND] < 99) {
IrSendInit();
}
#ifdef USE_IR_RECEIVE
if (pin[GPIO_IRRECV] < 99) {
IrReceiveInit();
}
#endif // USE_IR_RECEIVE
break;
case FUNC_EVERY_50_MSECOND:
#ifdef USE_IR_RECEIVE
if (pin[GPIO_IRRECV] < 99) {
IrReceiveCheck(); // check if there's anything on IR side
}
#endif // USE_IR_RECEIVE
break;
case FUNC_COMMAND:
if (pin[GPIO_IRSEND] < 99) {
result = IrSendCommand();
}
break;
}
}
return result;
}
#endif // USE_IR_REMOTE