2020-04-09 14:32:23 +01:00
/*
tasmota_globals . h - Function prototypes and global configurations for Tasmota
2021-01-01 12:44:04 +00:00
Copyright ( C ) 2021 Theo Arends
2020-04-09 14:32:23 +01:00
This program is free software : you can redistribute it and / or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation , either version 3 of the License , or
( at your option ) any later version .
This program is distributed in the hope that it will be useful ,
but WITHOUT ANY WARRANTY ; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE . See the
GNU General Public License for more details .
You should have received a copy of the GNU General Public License
along with this program . If not , see < http : //www.gnu.org/licenses/>.
*/
# ifndef _TASMOTA_GLOBALS_H_
# define _TASMOTA_GLOBALS_H_
/*********************************************************************************************\
* Function prototypes
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
// Needed for core 2.3.0 compilation (#6721)
# ifdef __cplusplus
extern " C " {
# endif
# include "user_interface.h"
# ifdef __cplusplus
}
# endif
2020-10-26 10:39:29 +00:00
# include <esp-knx-ip.h> // KNX Header files have to be global else compile fails -> lib/headers
2020-11-12 10:48:13 +00:00
# ifdef USE_KNX
2020-04-09 14:32:23 +01:00
void KNX_CB_Action ( message_t const & msg , void * arg ) ;
2020-10-26 10:39:29 +00:00
# endif // USE_KNX
2020-04-09 14:32:23 +01:00
void DomoticzTempHumPressureSensor ( float temp , float hum , float baro = - 1 ) ;
char * ToHex_P ( const unsigned char * in , size_t insz , char * out , size_t outsz , char inbetween = ' \0 ' ) ;
extern " C " void custom_crash_callback ( struct rst_info * rst_info , uint32_t stack , uint32_t stack_end ) ;
extern " C " void resetPins ( ) ;
2020-07-03 08:01:53 +01:00
extern " C " int startWaveformClockCycles ( uint8_t pin , uint32_t highCcys , uint32_t lowCcys ,
uint32_t runTimeCcys , int8_t alignPhase , uint32_t phaseOffsetCcys , bool autoPwm ) ;
2020-04-09 14:32:23 +01:00
2020-06-15 17:27:04 +01:00
# ifdef ESP32
2021-02-04 14:03:46 +00:00
# if CONFIG_IDF_TARGET_ESP32 // ESP32/PICO-D4
2020-06-15 17:27:04 +01:00
# ifdef USE_ETHERNET
IPAddress EthernetLocalIP ( void ) ;
char * EthernetHostname ( void ) ;
String EthernetMacAddress ( void ) ;
2021-02-04 14:03:46 +00:00
# endif // USE_ETHERNET
# endif // CONFIG_IDF_TARGET_ESP32
2020-06-15 17:27:04 +01:00
# endif // ESP32
2020-04-09 14:32:23 +01:00
/*********************************************************************************************\
* Preconfigured configurations
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# include "tasmota_configurations.h" // Preconfigured configurations
2020-11-17 13:07:04 +00:00
/*********************************************************************************************\
* ESP8266 specific parameters
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# ifdef ESP8266
# ifndef MODULE
# define MODULE SONOFF_BASIC // [Module] Select default model
# endif
# ifndef FALLBACK_MODULE
# define FALLBACK_MODULE SONOFF_BASIC // [Module2] Select default module on fast reboot where USER_MODULE is user template
# endif
# ifndef ARDUINO_ESP8266_RELEASE
# define ARDUINO_CORE_RELEASE "STAGE"
# else
# define ARDUINO_CORE_RELEASE ARDUINO_ESP8266_RELEASE
# endif // ARDUINO_ESP8266_RELEASE
# ifndef USE_ADC_VCC
# define USE_ADC
# else
# undef USE_ADC
# endif
# endif // ESP8266
/*********************************************************************************************\
* ESP32 specific parameters
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# ifdef ESP32
2021-02-04 14:03:46 +00:00
2022-02-20 13:12:05 +00:00
/*-------------------------------------------------------------------------------------------*\
2022-02-20 13:42:51 +00:00
* Start ESP32 specific parameters - disable features not present in ESP32
2022-02-20 13:12:05 +00:00
\ * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
2022-02-20 13:42:51 +00:00
# if CONFIG_IDF_TARGET_ESP32
# else // Disable features not present in other ESP32 like ESP32C3, ESP32S2, ESP32S3 etc.
2022-02-20 13:12:05 +00:00
# ifdef USE_ETHERNET
2022-02-20 13:42:51 +00:00
# undef USE_ETHERNET // All non-ESP32 do not support ethernet
2022-02-20 13:12:05 +00:00
# endif
2022-02-20 13:42:51 +00:00
# endif // CONFIG_IDF_TARGET_ESP32
/*-------------------------------------------------------------------------------------------*\
* End ESP32 specific parameters
\ * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
/*-------------------------------------------------------------------------------------------*\
* Start ESP32 - C32 specific parameters - disable features not present in ESP32 - C3
\ * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
# if CONFIG_IDF_TARGET_ESP32C3 // ESP32-C3
//#ifdef USE_ETHERNET
//#undef USE_ETHERNET // ESP32-C3 does not support ethernet
//#endif
2022-02-20 13:12:05 +00:00
# endif // CONFIG_IDF_TARGET_ESP32C3
/*-------------------------------------------------------------------------------------------*\
2022-02-20 13:42:51 +00:00
* End ESP32 - C3 specific parameters
2022-02-20 13:12:05 +00:00
\ * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
2021-02-04 14:03:46 +00:00
/*-------------------------------------------------------------------------------------------*\
* Start ESP32 - S2 specific parameters - disable features not present in ESP32 - S2
\ * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
# if CONFIG_IDF_TARGET_ESP32S2 // ESP32-S2
2022-02-20 13:42:51 +00:00
//#ifdef USE_ETHERNET
//#undef USE_ETHERNET // ESP32-S2 does not support ethernet
//#endif
2021-02-04 14:03:46 +00:00
# ifdef USE_BLE_ESP32
# undef USE_BLE_ESP32 // ESP32-S2 does not support BLE
# endif
# ifdef USE_MI_ESP32
# undef USE_MI_ESP32 // ESP32-S2 does not support BLE
# endif
# ifdef USE_IBEACON_ESP32
# undef USE_IBEACON_ESP32 // ESP32-S2 does not support BLE
# endif
# endif // CONFIG_IDF_TARGET_ESP32S2
/*-------------------------------------------------------------------------------------------*\
* End ESP32 - S2 specific parameters
\ * - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - */
2020-11-17 13:07:04 +00:00
# ifndef MODULE
# define MODULE WEMOS // [Module] Select default model
# endif
# ifndef FALLBACK_MODULE
# define FALLBACK_MODULE WEMOS // [Module2] Select default module on fast reboot where USER_MODULE is user template
# endif
# ifndef ARDUINO_ESP32_RELEASE
# define ARDUINO_CORE_RELEASE "STAGE"
# else
# define ARDUINO_CORE_RELEASE ARDUINO_ESP32_RELEASE
# endif // ARDUINO_ESP32_RELEASE
// Hardware has no ESP32
# undef USE_EXS_DIMMER
# undef USE_ARMTRONIX_DIMMERS
# undef USE_SONOFF_RF
# undef USE_SONOFF_SC
# undef USE_SONOFF_IFAN
# undef USE_SONOFF_L1
# undef USE_SONOFF_D1
# undef USE_SHELLY_DIMMER
# undef USE_RF_FLASH
// Not ported (yet)
# undef USE_PS_16_DZ
# undef USE_HM10 // Disable support for HM-10 as a BLE-bridge as an alternative is using the internal ESP32 BLE
# undef USE_KEELOQ // Disable support for Jarolift rollers by Keeloq algorithm as it's library cc1101 is not compatible with ESP32
# endif // ESP32
2021-08-01 16:51:54 +01:00
/*********************************************************************************************\
* Fallback parameters
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
2021-09-25 18:20:36 +01:00
# if defined(USE_PID) && (!defined(PID_USE_TIMPROP) || (PID_USE_TIMPROP > 0))
2021-01-07 14:07:14 +00:00
# define USE_TIMEPROP
2020-06-18 15:05:55 +01:00
# endif
2020-04-09 14:32:23 +01:00
// See https://github.com/esp8266/Arduino/pull/4889
# undef NO_EXTRA_4K_HEAP // Allocate 4k heap for WPS in ESP8166/Arduino core v2.4.2 (was always allocated in previous versions)
# ifndef USE_SONOFF_RF
# undef USE_RF_FLASH // Disable RF firmware flash when Sonoff Rf is disabled
# endif
2020-11-19 14:43:47 +00:00
# ifndef USE_ZIGBEE
# undef USE_ZIGBEE_EZSP // Disable Zigbee EZSP firmware flash
# endif
2020-11-17 11:25:48 +00:00
# ifndef USE_LIGHT
# undef SHELLY_FW_UPGRADE // Disable Shelly Dimmer firmware flash when lights are disabled
# endif
# ifndef USE_SHELLY_DIMMER
# undef SHELLY_FW_UPGRADE // Disable Shelly Dimmer firmware flash when Shelly Dimmer is disabled
# endif
2020-06-22 21:36:54 +01:00
# ifndef APP_INTERLOCK_MODE
# define APP_INTERLOCK_MODE false // [Interlock] Relay interlock mode
# endif
# ifndef APP_INTERLOCK_GROUP_1
# define APP_INTERLOCK_GROUP_1 0xFF // [Interlock] Relay bitmask for interlock group 1 - Legacy support using all relays in one interlock group
# endif
# ifndef APP_INTERLOCK_GROUP_2
# define APP_INTERLOCK_GROUP_2 0x00 // [Interlock] Relay bitmask for interlock group 2
# endif
# ifndef APP_INTERLOCK_GROUP_3
# define APP_INTERLOCK_GROUP_3 0x00 // [Interlock] Relay bitmask for interlock group 3
# endif
# ifndef APP_INTERLOCK_GROUP_4
# define APP_INTERLOCK_GROUP_4 0x00 // [Interlock] Relay bitmask for interlock group 4
# endif
2020-04-09 14:32:23 +01:00
# ifndef SWITCH_MODE
# define SWITCH_MODE TOGGLE // TOGGLE, FOLLOW or FOLLOW_INV (the wall switch state)
# endif
# ifndef MQTT_FINGERPRINT1
// Set an all-zeros default fingerprint to activate auto-learning on first connection (AWS IoT)
2020-10-18 19:06:27 +01:00
# define MQTT_FINGERPRINT1 0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 // [MqttFingerprint1] (auto-learn)
2020-04-09 14:32:23 +01:00
# endif
2020-07-04 11:56:05 +01:00
# ifndef MQTT_FINGERPRINT2 // SHA1('')
2020-10-18 19:06:27 +01:00
# define MQTT_FINGERPRINT2 0xDA,0x39,0xA3,0xEE,0x5E,0x6B,0x4B,0x0D,0x32,0x55,0xBF,0xEF,0x95,0x60,0x18,0x90,0xAF,0xD8,0x07,0x09 // [MqttFingerprint2] (invalid)
2020-04-09 14:32:23 +01:00
# endif
# ifndef WS2812_LEDS
# define WS2812_LEDS 30 // [Pixels] Number of LEDs
# endif
2020-07-17 10:49:56 +01:00
# if defined(ARDUINO_ESP8266_RELEASE_2_3_0) || defined(ARDUINO_ESP8266_RELEASE_2_4_0) || defined(ARDUINO_ESP8266_RELEASE_2_4_1) || defined(ARDUINO_ESP8266_RELEASE_2_4_2) || defined(ARDUINO_ESP8266_RELEASE_2_5_0) || defined(ARDUINO_ESP8266_RELEASE_2_5_1) || defined(ARDUINO_ESP8266_RELEASE_2_5_2)
# error "Arduino ESP8266 Core versions before 2.7.1 are not supported"
2020-04-09 14:32:23 +01:00
# endif
2021-01-20 14:06:34 +00:00
# define UFS_FILE_WRITE "w"
# define UFS_FILE_READ "r"
# define FS_FILE_WRITE "w"
# define FS_FILE_READ "r"
# define FS_FILE_APPEND "a"
2021-01-13 12:51:49 +00:00
# define TASM_FILE_SETTINGS " / .settings" // Settings binary blob
2021-06-13 10:10:52 +01:00
# define TASM_FILE_SETTINGS_LKG " / .settings.lkg" // Last Known Good Settings binary blob
2021-02-01 15:51:41 +00:00
# define TASM_FILE_DRIVER " / .drvset%03d"
# define TASM_FILE_SENSOR " / .snsset%03d"
2021-03-30 18:17:03 +01:00
# define TASM_FILE_TLSKEY " / tlskey" // TLS private key
2021-04-22 13:49:38 +01:00
# define TASM_FILE_ZIGBEE " / zb" // Zigbee devices information blob
# define TASM_FILE_ZIGBEE_DATA " / zbdata" // Zigbee last known values of devices
2021-02-15 15:37:09 +00:00
# define TASM_FILE_AUTOEXEC " / autoexec.bat" // Commands executed after restart
# define TASM_FILE_CONFIG " / config.sys" // Settings executed after restart
2021-01-08 16:06:17 +00:00
2020-04-09 14:32:23 +01:00
# ifndef MQTT_MAX_PACKET_SIZE
# define MQTT_MAX_PACKET_SIZE 1200 // Bytes
2021-05-24 15:52:59 +01:00
//#define MQTT_MAX_PACKET_SIZE 2048 // Bytes
2020-04-09 14:32:23 +01:00
# endif
# ifndef MQTT_KEEPALIVE
# define MQTT_KEEPALIVE 30 // Seconds
# endif
2021-03-18 16:44:10 +00:00
# ifndef MQTT_SOCKET_TIMEOUT
# define MQTT_SOCKET_TIMEOUT 4 // Seconds
2020-04-09 14:32:23 +01:00
# endif
2021-06-15 09:15:36 +01:00
# ifndef MQTT_WIFI_CLIENT_TIMEOUT
# define MQTT_WIFI_CLIENT_TIMEOUT 200 // Wifi TCP connection timeout (default is 5000 mSec)
# endif
2020-04-09 14:32:23 +01:00
# ifndef MQTT_CLEAN_SESSION
# define MQTT_CLEAN_SESSION 1 // 0 = No clean session, 1 = Clean session (default)
# endif
2020-09-27 11:57:49 +01:00
# ifndef MQTT_LWT_OFFLINE
# define MQTT_LWT_OFFLINE "Offline" // MQTT LWT offline topic message
# endif
# ifndef MQTT_LWT_ONLINE
# define MQTT_LWT_ONLINE "Online" // MQTT LWT online topic message
# endif
2020-04-09 14:32:23 +01:00
# ifndef MESSZ
2021-06-09 16:24:28 +01:00
# define MESSZ 1040 // Max number of characters in JSON message string (Hass discovery and nice MQTT_MAX_PACKET_SIZE = 1200)
2020-04-09 14:32:23 +01:00
# endif
# ifndef USE_DEVICE_GROUPS
# undef USE_PWM_DIMMER_REMOTE
2020-04-25 23:49:34 +01:00
# undef USE_DGR_LIGHT_SEQUENCE
# endif // USE_DEVICE_GROUPS
2020-04-09 14:32:23 +01:00
# ifndef DOMOTICZ_UPDATE_TIMER
# define DOMOTICZ_UPDATE_TIMER 0 // [DomoticzUpdateTimer] Send relay status (0 = disable, 1 - 3600 seconds) (Optional)
# endif
# ifndef EMULATION
# define EMULATION EMUL_NONE // [Emulation] Select Belkin WeMo (single relay/light) or Hue Bridge emulation (multi relay/light) (EMUL_NONE, EMUL_WEMO or EMUL_HUE)
# endif
# ifndef MTX_ADDRESS1 // Add Display Support for up to eigth Matrices
# define MTX_ADDRESS1 0
# endif
# ifndef MTX_ADDRESS2
# define MTX_ADDRESS2 0
# endif
# ifndef MTX_ADDRESS3
# define MTX_ADDRESS3 0
# endif
# ifndef MTX_ADDRESS4
# define MTX_ADDRESS4 0
# endif
# ifndef MTX_ADDRESS5
# define MTX_ADDRESS5 0
# endif
# ifndef MTX_ADDRESS6
# define MTX_ADDRESS6 0
# endif
# ifndef MTX_ADDRESS7
# define MTX_ADDRESS7 0
# endif
# ifndef MTX_ADDRESS8
# define MTX_ADDRESS8 0
# endif
# ifndef HOME_ASSISTANT_DISCOVERY_ENABLE
# define HOME_ASSISTANT_DISCOVERY_ENABLE 0
# endif
# ifndef LATITUDE
# define LATITUDE 48.858360 // [Latitude] Your location to be used with sunrise and sunset
# endif
# ifndef LONGITUDE
# define LONGITUDE 2.294442 // [Longitude] Your location to be used with sunrise and sunset
# endif
# ifndef IR_RCV_MIN_UNKNOWN_SIZE
# define IR_RCV_MIN_UNKNOWN_SIZE 6 // Set the smallest sized "UNKNOWN" message packets we actually care about (default 6, max 255)
# endif
2022-01-21 15:24:32 +00:00
# ifndef IR_RCV_TOLERANCE
# define IR_RCV_TOLERANCE 25 // Base tolerance percentage for matching incoming IR messages (default 25, max 100)
# endif
2020-04-09 14:32:23 +01:00
# ifndef ENERGY_OVERTEMP
# define ENERGY_OVERTEMP 90 // Overtemp in Celsius
# endif
# ifndef DEFAULT_DIMMER_MAX
# define DEFAULT_DIMMER_MAX 100
# endif
# ifndef DEFAULT_DIMMER_MIN
# define DEFAULT_DIMMER_MIN 0
# endif
2020-10-30 13:49:36 +00:00
# ifndef DEFAULT_DIMMER_STEP
# define DEFAULT_DIMMER_STEP 10
# endif
2020-04-09 14:32:23 +01:00
# ifndef DEFAULT_LIGHT_DIMMER
# define DEFAULT_LIGHT_DIMMER 10
# endif
# ifndef DEFAULT_LIGHT_COMPONENT
# define DEFAULT_LIGHT_COMPONENT 255
# endif
# ifndef CORS_ENABLED_ALL
# define CORS_ENABLED_ALL "*"
# endif
# ifndef WORKING_PERIOD
# define WORKING_PERIOD 5 // Working period of the SDS Sensor, Takes a reading every X Minutes
# endif
# ifndef STARTING_OFFSET
# define STARTING_OFFSET 30 // NOVA SDS parameter used in settings
# endif
2021-08-02 01:25:32 +01:00
# ifndef WIFI_RGX_STATE
# define WIFI_RGX_STATE 0
# endif
# ifndef WIFI_RGX_NAPT
# define WIFI_RGX_NAPT 0
# endif
2021-08-01 16:51:54 +01:00
# ifndef WIFI_RGX_SSID
# define WIFI_RGX_SSID ""
# endif
# ifndef WIFI_RGX_PASSWORD
# define WIFI_RGX_PASSWORD ""
# endif
# ifndef WIFI_RGX_IP_ADDRESS
# define WIFI_RGX_IP_ADDRESS "192.168.99.1"
# endif
# ifndef WIFI_RGX_SUBNETMASK
# define WIFI_RGX_SUBNETMASK "255.255.255.0"
# endif
2020-04-09 14:32:23 +01:00
/*********************************************************************************************\
* UserConfig related parameters
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# ifndef COLOR_TEXT
# define COLOR_TEXT "#000" // Global text color - Black
# endif
# ifndef COLOR_BACKGROUND
# define COLOR_BACKGROUND "#fff" // Global background color - White
# endif
# ifndef COLOR_FORM
# define COLOR_FORM "#f2f2f2" // Form background color - Greyish
# endif
# ifndef COLOR_INPUT_TEXT
# define COLOR_INPUT_TEXT "#000" // Input text color - Black
# endif
# ifndef COLOR_INPUT
# define COLOR_INPUT "#fff" // Input background color - White
# endif
# ifndef COLOR_CONSOLE_TEXT
# define COLOR_CONSOLE_TEXT "#000" // Console text color - Black
# endif
# ifndef COLOR_CONSOLE
# define COLOR_CONSOLE "#fff" // Console background color - White
# endif
# ifndef COLOR_TEXT_WARNING
# define COLOR_TEXT_WARNING "#f00" // Warning text color - Red
# endif
# ifndef COLOR_TEXT_SUCCESS
# define COLOR_TEXT_SUCCESS "#008000" // Success text color - Green
# endif
# ifndef COLOR_BUTTON_TEXT
# define COLOR_BUTTON_TEXT "#fff" // Button text color - White
# endif
# ifndef COLOR_BUTTON
# define COLOR_BUTTON "#1fa3ec" // Button color - Blueish
# endif
# ifndef COLOR_BUTTON_HOVER
# define COLOR_BUTTON_HOVER "#0e70a4" // Button color when hovered over - Darker blueish
# endif
# ifndef COLOR_BUTTON_RESET
# define COLOR_BUTTON_RESET "#d43535" // Restart/Reset/Delete button color - Redish
# endif
# ifndef COLOR_BUTTON_RESET_HOVER
# define COLOR_BUTTON_RESET_HOVER "#931f1f" // Restart/Reset/Delete button color when hovered over - Darker redish
# endif
# ifndef COLOR_BUTTON_SAVE
# define COLOR_BUTTON_SAVE "#47c266" // Save button color - Greenish
# endif
# ifndef COLOR_BUTTON_SAVE_HOVER
# define COLOR_BUTTON_SAVE_HOVER "#5aaf6f" // Save button color when hovered over - Darker greenish
# endif
# ifndef COLOR_TIMER_TAB_TEXT
# define COLOR_TIMER_TAB_TEXT "#fff" // Config timer tab text color - White
# endif
# ifndef COLOR_TIMER_TAB_BACKGROUND
# define COLOR_TIMER_TAB_BACKGROUND "#999" // Config timer tab background color - Light grey
# endif
# ifndef COLOR_TITLE_TEXT
# define COLOR_TITLE_TEXT COLOR_TEXT // Title text color defaults to global text color either dark or light
# endif
enum WebColors {
COL_TEXT , COL_BACKGROUND , COL_FORM ,
COL_INPUT_TEXT , COL_INPUT , COL_CONSOLE_TEXT , COL_CONSOLE ,
COL_TEXT_WARNING , COL_TEXT_SUCCESS ,
COL_BUTTON_TEXT , COL_BUTTON , COL_BUTTON_HOVER , COL_BUTTON_RESET , COL_BUTTON_RESET_HOVER , COL_BUTTON_SAVE , COL_BUTTON_SAVE_HOVER ,
COL_TIMER_TAB_TEXT , COL_TIMER_TAB_BACKGROUND , COL_TITLE ,
COL_LAST } ;
const char kWebColors [ ] PROGMEM =
COLOR_TEXT " | " COLOR_BACKGROUND " | " COLOR_FORM " | "
COLOR_INPUT_TEXT " | " COLOR_INPUT " | " COLOR_CONSOLE_TEXT " | " COLOR_CONSOLE " | "
COLOR_TEXT_WARNING " | " COLOR_TEXT_SUCCESS " | "
COLOR_BUTTON_TEXT " | " COLOR_BUTTON " | " COLOR_BUTTON_HOVER " | " COLOR_BUTTON_RESET " | " COLOR_BUTTON_RESET_HOVER " | " COLOR_BUTTON_SAVE " | " COLOR_BUTTON_SAVE_HOVER " | "
COLOR_TIMER_TAB_TEXT " | " COLOR_TIMER_TAB_BACKGROUND " | " COLOR_TITLE_TEXT ;
/*********************************************************************************************\
* Macros
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
/*
// Removed from esp8266 core since 20171105
# define min(a,b) ((a)<(b)?(a):(b))
# define max(a,b) ((a)>(b)?(a):(b))
*/
# define tmin(a,b) ((a)<(b)?(a):(b))
# define tmax(a,b) ((a)>(b)?(a):(b))
2021-02-28 11:50:02 +00:00
# define nitems(_a) (sizeof((_a)) / sizeof((_a)[0]))
2020-04-09 14:32:23 +01:00
# define STR_HELPER(x) #x
# ifndef STR
# define STR(x) STR_HELPER(x)
# endif
2020-11-12 15:11:32 +00:00
# define AGPIO(x) ((x)<<5)
# define BGPIO(x) ((x)>>5)
2020-04-29 16:44:03 +01:00
2020-04-09 14:32:23 +01:00
# ifdef USE_DEVICE_GROUPS
# define SendDeviceGroupMessage(DEVICE_INDEX, REQUEST_TYPE, ...) _SendDeviceGroupMessage(DEVICE_INDEX, REQUEST_TYPE, __VA_ARGS__, 0)
2020-08-09 16:16:15 +01:00
uint8_t device_group_count = 0 ;
2020-10-20 02:12:41 +01:00
bool first_device_group_is_local = true ;
2020-04-09 14:32:23 +01:00
# endif // USE_DEVICE_GROUPS
# ifdef DEBUG_TASMOTA_CORE
2021-06-05 10:47:09 +01:00
# define DEBUG_CORE_LOG(...) AddLog(LOG_LEVEL_DEBUG, __VA_ARGS__)
2020-04-09 14:32:23 +01:00
# else
# define DEBUG_CORE_LOG(...)
# endif
# ifdef DEBUG_TASMOTA_DRIVER
2021-06-05 10:47:09 +01:00
# define DEBUG_DRIVER_LOG(...) AddLog(LOG_LEVEL_DEBUG, __VA_ARGS__)
2020-04-09 14:32:23 +01:00
# else
# define DEBUG_DRIVER_LOG(...)
# endif
# ifdef DEBUG_TASMOTA_SENSOR
2021-06-05 10:47:09 +01:00
# define DEBUG_SENSOR_LOG(...) AddLog(LOG_LEVEL_DEBUG, __VA_ARGS__)
2020-04-09 14:32:23 +01:00
# else
# define DEBUG_SENSOR_LOG(...)
# endif
# ifdef DEBUG_TASMOTA_TRACE
2021-06-05 10:47:09 +01:00
# define DEBUG_TRACE_LOG(...) AddLog(LOG_LEVEL_DEBUG, __VA_ARGS__)
2020-04-09 14:32:23 +01:00
# else
# define DEBUG_TRACE_LOG(...)
# endif
2021-06-25 16:09:53 +01:00
# ifdef USE_DEBUG_DRIVER
# define SHOW_FREE_MEM(WHERE) ShowFreeMem(WHERE);
# else
# define SHOW_FREE_MEM(WHERE)
# endif
2021-01-28 08:04:42 +00:00
2021-11-03 09:42:30 +00:00
# ifndef USE_PROFILING
# undef USE_PROFILE_DRIVER
# undef USE_PROFILE_FUNCTION
# endif
# ifdef USE_PROFILE_DRIVER
# define PROFILE_DRIVER(DRIVER, FUNCTION, START) AddLogDriver(DRIVER, FUNCTION, START)
# else
# define PROFILE_DRIVER(DRIVER, FUNCTION, START)
# endif // USE_PROFILE_DRIVER
# ifdef USE_PROFILE_FUNCTION
# define PROFILE_FUNCTION(DRIVER, INDEX, FUNCTION, START) AddLogFunction(DRIVER, INDEX, FUNCTION, START)
# else
# define PROFILE_FUNCTION(DRIVER, INDEX, FUNCTION, START)
# endif // USE_PROFILE_DRIVER
2021-01-28 08:04:42 +00:00
/*********************************************************************************************\
* Macro for SetOption synonyms
2021-02-01 15:51:41 +00:00
*
2021-01-28 08:04:42 +00:00
* SetOption synonyms come first in the list of commands , right after the prefix .
* They don ' t need any matching function pointer , since they are handled internally .
* So don ' t forget to NOT put pointers in the functions pointers list .
2021-02-01 15:51:41 +00:00
*
2021-01-28 08:04:42 +00:00
* The additionnal list of unsigned bytes contains the Option numbers of each synonyms
* in the same order . The first byte of the list contains the number of synonyms
* ( not including the number itself ) . The is the number of names to skip to find the first command .
2021-02-01 15:51:41 +00:00
*
2021-01-28 08:04:42 +00:00
* As it si cumbersome to calculate the first byte ( number of synonyms ) , we provide the following
* macro ` SO_SYNONYMS ( < name > , < list of bytes > ) `
2021-02-01 15:51:41 +00:00
*
2021-01-28 08:04:42 +00:00
* For example :
* ` ` `
* SO_SYNONYMS ( kLightSynonyms ,
* 37 , 68 , 82 , 91 , 92 , 105 ,
* 106 ,
* ) ;
* ` ` `
2021-02-01 15:51:41 +00:00
*
2021-01-28 08:04:42 +00:00
* is equivalent to :
* ` ` `
* const static uint8_t kLightSynonyms [ ] PROGMEM = {
* 7 , // number of synonyms, automatically calculated
* 37 , 68 , 82 , 91 , 92 , 105 ,
* 106 ,
* } ;
* ` ` `
2021-02-01 15:51:41 +00:00
*
2021-01-28 08:04:42 +00:00
* This comes very handy if you need to adjust the number of synonyms depending on # defines
\ * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * */
# define SO_SYNONYMS(N,...) const static uint8_t __syn_array_len_ ## N[] = { __VA_ARGS__ }; /* this first array will not be kept by linker, just used for sizeof() */ const static uint8_t N[] PROGMEM = { sizeof(__syn_array_len_ ## N), __VA_ARGS__ };
2020-04-09 14:32:23 +01:00
/*********************************************************************************************/
# endif // _TASMOTA_GLOBALS_H_
