mirror of https://github.com/arendst/Tasmota.git
Epaper29 v2 (#17627)
* support for v2 * Update ST7262_rgb16_display.ini
This commit is contained in:
gemu
GitHub
parent
5e89578403
commit
2f1e36e1bf
|
|
@ -28,6 +28,8 @@
|
|||
#include "epd2in9.h"
|
||||
|
||||
|
||||
#define EPD_29_V2
|
||||
|
||||
Epd::Epd(int16_t width, int16_t height) :
|
||||
Paint(width,height) {
|
||||
}
|
||||
|
|
@ -126,6 +128,32 @@ int Epd::Init(const unsigned char* lut) {
|
|||
width = EPD_WIDTH;
|
||||
height = EPD_HEIGHT;
|
||||
|
||||
#ifdef EPD_29_V2
|
||||
/* EPD hardware init start */
|
||||
WaitUntilIdle();
|
||||
SendCommand(0x12); //SWRESET
|
||||
WaitUntilIdle();
|
||||
|
||||
SendCommand(0x01); //Driver output control
|
||||
SendData(0x27);
|
||||
SendData(0x01);
|
||||
SendData(0x00);
|
||||
|
||||
SendCommand(0x11); //data entry mode
|
||||
SendData(0x03);
|
||||
|
||||
SetMemoryArea(0, 0, width-1, height-1);
|
||||
|
||||
SendCommand(0x21); // Display update control
|
||||
SendData(0x00);
|
||||
SendData(0x80);
|
||||
|
||||
SetMemoryPointer(0, 0);
|
||||
WaitUntilIdle();
|
||||
|
||||
SetLut_by_host(lut_full_update);
|
||||
|
||||
#else
|
||||
/* EPD hardware init start */
|
||||
this->lut = lut;
|
||||
Reset();
|
||||
|
|
@ -146,6 +174,7 @@ int Epd::Init(const unsigned char* lut) {
|
|||
SendCommand(DATA_ENTRY_MODE_SETTING);
|
||||
SendData(0x03); // X increment; Y increment
|
||||
SetLut(this->lut);
|
||||
#endif
|
||||
/* EPD hardware init end */
|
||||
return 0;
|
||||
}
|
||||
|
|
@ -172,6 +201,11 @@ void Epd::SendData(unsigned char data) {
|
|||
* @brief: Wait until the busy_pin goes LOW
|
||||
*/
|
||||
void Epd::WaitUntilIdle(void) {
|
||||
|
||||
#ifdef EPD_29_V2
|
||||
delay(100);
|
||||
#endif
|
||||
|
||||
return;
|
||||
//while(DigitalRead(busy_pin) == HIGH) { //LOW: idle, HIGH: busy
|
||||
// DelayMs(100);
|
||||
|
|
@ -190,6 +224,34 @@ void Epd::Reset(void) {
|
|||
//delay(200);
|
||||
}
|
||||
|
||||
#ifdef EPD_29_V2
|
||||
void Epd::SetLut(const unsigned char *lut) {
|
||||
unsigned char count;
|
||||
SendCommand(0x32);
|
||||
for(count=0; count<153; count++)
|
||||
SendData(lut[count]);
|
||||
WaitUntilIdle();
|
||||
}
|
||||
|
||||
|
||||
void Epd::SetLut_by_host(const unsigned char *lut) {
|
||||
SetLut((unsigned char *)lut);
|
||||
SendCommand(0x3f);
|
||||
SendData(*(lut+153));
|
||||
SendCommand(0x03); // gate voltage
|
||||
SendData(*(lut+154));
|
||||
SendCommand(0x04); // source voltage
|
||||
SendData(*(lut+155)); // VSH
|
||||
SendData(*(lut+156)); // VSH2
|
||||
SendData(*(lut+157)); // VSL
|
||||
SendCommand(0x2c); // VCOM
|
||||
SendData(*(lut+158));
|
||||
}
|
||||
#else
|
||||
|
||||
void Epd::SetLut_by_host(const unsigned char *lut) {
|
||||
|
||||
}
|
||||
/**
|
||||
* @brief: set the look-up table register
|
||||
*/
|
||||
|
|
@ -201,6 +263,7 @@ void Epd::SetLut(const unsigned char* lut) {
|
|||
SendData(this->lut[i]);
|
||||
}
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief: put an image buffer to the frame memory.
|
||||
|
|
@ -310,6 +373,23 @@ void Epd::DisplayFrame(void) {
|
|||
WaitUntilIdle();
|
||||
}
|
||||
|
||||
|
||||
#ifdef EPD_29_V2
|
||||
/**
|
||||
* @brief: private function to specify the memory area for data R/W
|
||||
*/
|
||||
void Epd::SetMemoryArea(int x_start, int y_start, int x_end, int y_end) {
|
||||
SendCommand(0x44);
|
||||
/* x point must be the multiple of 8 or the last 3 bits will be ignored */
|
||||
SendData((x_start >> 3) & 0xFF);
|
||||
SendData((x_end >> 3) & 0xFF);
|
||||
SendCommand(0x45);
|
||||
SendData(y_start & 0xFF);
|
||||
SendData((y_start >> 8) & 0xFF);
|
||||
SendData(y_end & 0xFF);
|
||||
SendData((y_end >> 8) & 0xFF);
|
||||
}
|
||||
#else
|
||||
/**
|
||||
* @brief: private function to specify the memory area for data R/W
|
||||
*/
|
||||
|
|
@ -324,7 +404,24 @@ void Epd::SetMemoryArea(int x_start, int y_start, int x_end, int y_end) {
|
|||
SendData(y_end & 0xFF);
|
||||
SendData((y_end >> 8) & 0xFF);
|
||||
}
|
||||
#endif
|
||||
|
||||
|
||||
#ifdef EPD_29_V2
|
||||
|
||||
/**
|
||||
* @brief: private function to specify the start point for data R/W
|
||||
*/
|
||||
void Epd::SetMemoryPointer(int x, int y) {
|
||||
SendCommand(0x4E);
|
||||
/* x point must be the multiple of 8 or the last 3 bits will be ignored */
|
||||
SendData((x >> 3) & 0xFF);
|
||||
SendCommand(0x4F);
|
||||
SendData(y & 0xFF);
|
||||
SendData((y >> 8) & 0xFF);
|
||||
WaitUntilIdle();
|
||||
}
|
||||
#else
|
||||
/**
|
||||
* @brief: private function to specify the start point for data R/W
|
||||
*/
|
||||
|
|
@ -337,6 +434,7 @@ void Epd::SetMemoryPointer(int x, int y) {
|
|||
SendData((y >> 8) & 0xFF);
|
||||
WaitUntilIdle();
|
||||
}
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief: After this command is transmitted, the chip would enter the
|
||||
|
|
@ -349,6 +447,56 @@ void Epd::Sleep() {
|
|||
WaitUntilIdle();
|
||||
}
|
||||
|
||||
#ifdef EPD_29_V2
|
||||
|
||||
const unsigned char lut_partial_update[159] =
|
||||
{
|
||||
0x0,0x40,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x80,0x80,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x40,0x40,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x80,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0A,0x0,0x0,0x0,0x0,0x0,0x2,
|
||||
0x1,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x1,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x0,0x0,0x0,0x0,0x0,0x0,0x0,
|
||||
0x22,0x22,0x22,0x22,0x22,0x22,0x0,0x0,0x0,
|
||||
0x22,0x17,0x41,0xB0,0x32,0x36,
|
||||
};
|
||||
|
||||
const unsigned char lut_full_update[159] =
|
||||
{
|
||||
0x80, 0x66, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0x0, 0x0, 0x0,
|
||||
0x10, 0x66, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x20, 0x0, 0x0, 0x0,
|
||||
0x80, 0x66, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x40, 0x0, 0x0, 0x0,
|
||||
0x10, 0x66, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x20, 0x0, 0x0, 0x0,
|
||||
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
|
||||
0x14, 0x8, 0x0, 0x0, 0x0, 0x0, 0x1,
|
||||
0xA, 0xA, 0x0, 0xA, 0xA, 0x0, 0x1,
|
||||
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
|
||||
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
|
||||
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
|
||||
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
|
||||
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
|
||||
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
|
||||
0x14, 0x8, 0x0, 0x1, 0x0, 0x0, 0x1,
|
||||
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x1,
|
||||
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
|
||||
0x0, 0x0, 0x0, 0x0, 0x0, 0x0, 0x0,
|
||||
0x44, 0x44, 0x44, 0x44, 0x44, 0x44, 0x0, 0x0, 0x0,
|
||||
0x22, 0x17, 0x41, 0x0, 0x32, 0x36
|
||||
};
|
||||
|
||||
#else
|
||||
|
||||
const unsigned char lut_full_update[] =
|
||||
{
|
||||
0x02, 0x02, 0x01, 0x11, 0x12, 0x12, 0x22, 0x22,
|
||||
|
|
@ -364,7 +512,7 @@ const unsigned char lut_partial_update[] =
|
|||
0x00, 0x00, 0x00, 0x00, 0x13, 0x14, 0x44, 0x12,
|
||||
0x00, 0x00, 0x00, 0x00, 0x00, 0x00
|
||||
};
|
||||
|
||||
#endif // EPD_29_V2
|
||||
|
||||
#define PIN_OUT_SET 0x60000304
|
||||
#define PIN_OUT_CLEAR 0x60000308
|
||||
|
|
|
|||
|
|
@ -106,6 +106,8 @@ private:
|
|||
void SetLut(const unsigned char* lut);
|
||||
void SetMemoryArea(int x_start, int y_start, int x_end, int y_end);
|
||||
void SetMemoryPointer(int x, int y);
|
||||
void SetLut_by_host(const unsigned char* lut);
|
||||
|
||||
//void fastSPIwrite(uint8_t d,uint8_t dc);
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -1,5 +1,9 @@
|
|||
:H,ST7262,800,480,16,RGB,40,41,39,42,2,15,16,4,45,48,47,21,14,8,3,46,9,1,5,6,7,14
|
||||
:S,2,1,1,0,40,20
|
||||
:V,0,8,4,8,0,8,4,8,1
|
||||
:TI1,5a,*,*,-1,38
|
||||
:0,00
|
||||
:1,01
|
||||
:2,02
|
||||
:3,03
|
||||
:TI1,5d,*,*,-1,38
|
||||
#
|
||||
|
|
|
|||
Loading…
Reference in New Issue