Update Cz and Fr language files

This commit is contained in:
Theo Arends 2018-04-20 10:40:58 +02:00
parent 76f699bf02
commit 67a8f0fc60
2 changed files with 28 additions and 28 deletions

View File

@ -1,7 +1,7 @@
/*
cs-CZ.h - localization for Czech with diacritics - Czech for Sonoff-Tasmota
Copyright (C) 2018 Theo Arends (translated by vs)
Copyright (C) 2018 Vladimír Synekl
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -28,7 +28,7 @@
* Use online command StateText to translate ON, OFF, HOLD and TOGGLE.
* Use online command Prefix to translate cmnd, stat and tele.
*
* Updated until v5.12.0k
* Updated until v5.12.0m
\*********************************************************************/
//#define LANGUAGE_MODULE_NAME // Enable to display "Module Generic" (ie Spanish), Disable to display "Generic Module" (ie English)
@ -57,7 +57,7 @@
#define D_AUTO "AUTO"
#define D_BLINK "Blikání"
#define D_BLINKOFF "BlikáníVyp"
#define D_BOOT_COUNT "Počitadlo spuštění"
#define D_BOOT_COUNT "Počítadlo spuštění"
#define D_BRIGHTLIGHT "Světlý"
#define D_BUTTON "Tlačítko"
#define D_BY "by" // Written by me
@ -69,7 +69,7 @@
#define D_COMMAND "Příkaz"
#define D_CONNECTED "...připojeno"
#define D_COUNT "Počítej"
#define D_COUNTER "Počitadlo"
#define D_COUNTER "Počítadlo"
#define D_CURRENT "Proud" // As in Voltage and Current
#define D_DATA "Data"
#define D_DARKLIGHT "Tmavý"
@ -116,7 +116,7 @@
#define D_ONLINE "Aktivní"
#define D_PASSWORD "Heslo"
#define D_PORT "Port"
#define D_POWER_FACTOR "Součinitel příkonu"
#define D_POWER_FACTOR "Účiník"
#define D_POWERUSAGE "Příkon"
#define D_PRESSURE "Tlak"
#define D_PRESSUREATSEALEVEL "Tlak na úrovni hladiny moře"
@ -375,24 +375,24 @@
#define D_TIMER_ACTION "Napájení"
// xdrv_10_knx.ino
#define D_CONFIGURE_KNX "Configure KNX"
#define D_KNX_PARAMETERS "KNX Parameters"
#define D_KNX_GENERAL_CONFIG "General"
#define D_KNX_PHYSICAL_ADDRESS "Physical Address"
#define D_KNX_PHYSICAL_ADDRESS_NOTE "( Must be unique on the KNX network )"
#define D_KNX_ENABLE "Enable KNX"
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Data to Send to Group Addresses"
#define D_ADD "Add"
#define D_DELETE "Delete"
#define D_REPLY "Reply"
#define D_KNX_GROUP_ADDRESS_TO_READ "Group Addresses to Receive Data from"
#define D_CONFIGURE_KNX "Nastavení KNX"
#define D_KNX_PARAMETERS "KNX parametry"
#define D_KNX_GENERAL_CONFIG "Obecné"
#define D_KNX_PHYSICAL_ADDRESS "Fyzická adresa"
#define D_KNX_PHYSICAL_ADDRESS_NOTE "( Musí být jedinečná v síti KNX )"
#define D_KNX_ENABLE "Povol KNX"
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Data k odeslání na skupinové adresy"
#define D_ADD "Přidej"
#define D_DELETE "Smaž"
#define D_REPLY "Odpověď"
#define D_KNX_GROUP_ADDRESS_TO_READ "Skupinové adresy pro příjem dat z"
#define D_LOG_KNX "KNX: "
#define D_RECEIVED_FROM "Received from"
#define D_KNX_COMMAND_WRITE "Write"
#define D_KNX_COMMAND_READ "Read"
#define D_KNX_COMMAND_OTHER "Other"
#define D_SENT_TO "sent to"
#define D_KNX_WARNING "The group address ( 0 / 0 / 0 ) is reserved and can not be used."
#define D_RECEIVED_FROM "Přijato z"
#define D_KNX_COMMAND_WRITE "Zapiš"
#define D_KNX_COMMAND_READ "Čti"
#define D_KNX_COMMAND_OTHER "Jiné"
#define D_SENT_TO "pošli"
#define D_KNX_WARNING "Skupinová adresa ( 0 / 0 / 0 ) je rezervována a nemůže být použita."
// xdrv_03_energy.ino
#define D_ENERGY_TODAY "Spotřeba Dnes"
@ -435,7 +435,7 @@
#define D_SENSOR_RELAY "Relé" // Suffix "1i"
#define D_SENSOR_LED "Led" // Suffix "1i"
#define D_SENSOR_PWM "PWM" // Suffix "1",
#define D_SENSOR_COUNTER "Počitadlo" // Suffix "1"
#define D_SENSOR_COUNTER "Počítadlo" // Suffix "1"
#define D_SENSOR_IRRECV "IRrecv"
#define D_SENSOR_MHZ_RX "MHZ Rx"
#define D_SENSOR_MHZ_TX "MHZ Tx"

View File

@ -309,14 +309,14 @@
#define D_UPLOAD_ERR_3 "L'octet magique n'est pas 0xE9"
#define D_UPLOAD_ERR_4 "La taille du programme à flasher est plus grande que la taille réelle de la mémoire flash"
#define D_UPLOAD_ERR_5 "Erreur de comparaison du buffer de téléchargement"
#define D_UPLOAD_ERR_6 "Téléchargement échoué. Activation logging 3"
#define D_UPLOAD_ERR_6 "Téléchargement échoué. Activer Weblog 3"
#define D_UPLOAD_ERR_7 "Téléchargement annulé"
#define D_UPLOAD_ERR_8 "Fichier invalide"
#define D_UPLOAD_ERR_9 "Fichier trop grand"
#define D_UPLOAD_ERROR_CODE "Code d'erreur téléchargement"
#define D_ENTER_COMMAND "Saisir une commande"
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Activer weblog 2 si response attendue"
#define D_ENABLE_WEBLOG_FOR_RESPONSE "Activer Weblog 2 si une réponse est attendue"
#define D_NEED_USER_AND_PASSWORD "Nécessite utilisateur=<username>&password=<password>"
// xdrv_00_mqtt.ino
@ -345,7 +345,7 @@
#define D_HUE_API_NOT_IMPLEMENTED "API Hue non implémentée"
#define D_HUE_API "Hue API"
#define D_HUE_POST_ARGS "Hue POST args"
#define D_3_RESPONSE_PACKETS_SENT "3 paquets Response envoyés"
#define D_3_RESPONSE_PACKETS_SENT "3 paquets de réponse envoyés"
// xdrv_05_domoticz.ino
#define D_DOMOTICZ_PARAMETERS "Paramètres Domoticz"
@ -381,7 +381,7 @@
#define D_KNX_PHYSICAL_ADDRESS "Adresse individuelle" // Backbone/Line/Device -> Zone/Ligne/Participant
#define D_KNX_PHYSICAL_ADDRESS_NOTE "(Doit être unique sur le réseau KNX)"
#define D_KNX_ENABLE "Activer KNX"
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Données à envoyer à les Adresses de Groupe"
#define D_KNX_GROUP_ADDRESS_TO_WRITE "Données à envoyer aux Adresses de Groupe"
#define D_ADD "Ajoûter"
#define D_DELETE "Supprimer"
#define D_REPLY "Répondre"