398a72d128
Remove command code from sonoff.ino and introduce support_command.ino
...
Remove command code from sonoff.ino and introduce support_command.ino
2019-07-24 11:55:58 +02:00
1068d59a63
Extent commands Var and Mem with option to show all parameters at once
...
Extent commands Var and Mem with option to show all parameters at once (#6107 )
2019-07-24 11:10:15 +02:00
d77017fd74
Add option to disable support for module Sonoff iFan at compile time
...
Add option to disable support for module Sonoff iFan at compile time (#6093 )
2019-07-14 22:08:19 +02:00
49022d0320
6.6.0.2 Add support for Sonoff iFan03 as module 71
...
Add support for Sonoff iFan03 as module 71 (#5988 )
2019-07-14 15:23:02 +02:00
c3d2937f22
Add command Time to disable NTP and set UTC time as Epoch value if above 1451602800 (=20160101). Time 0 re-enables NTP
...
Add command Time to disable NTP and set UTC time as Epoch value if above 1451602800 (=20160101). Time 0 re-enables NTP (#5279 )
2019-07-11 14:59:28 +02:00
64521b42b6
Add Epoch and UptimeSec to JSON messages
...
Add Epoch and UptimeSec to JSON messages (#6068 )
2019-07-11 14:09:42 +02:00
86314e24e5
Fix ambiguous Tuya set relay option by adding command SetOption41 allowing to control number of virtual relays
...
Fix ambiguous Tuya set relay option by adding command SetOption41 allowing to control number of virtual relays (#6039 )
2019-07-08 12:42:46 +02:00
b76b5f35c3
Extent some char buffers to accomodate UTF-16 character sets
...
Extent some char buffers to accomodate UTF-16 character sets (#6026 )
2019-07-06 12:53:07 +02:00
b73b40ee11
Remove hourly uptime message
...
Remove hourly uptime message
2019-07-05 12:05:34 +02:00
99f680da57
Add NTP drift information
...
Add NTP drift information
2019-07-05 11:47:13 +02:00
9268976ff1
Add Heap info to state message
...
Add Heap info to state message
2019-07-01 15:30:40 +02:00
1b69502d9b
Code optimization - Change for(uint8_t in for (uint32_t
...
Code optimization - Change for(uint8_t in for (uint32_t
2019-06-30 16:44:36 +02:00
30adce5648
Revert "Code optimization - Change for(uint8_t in for (uint32_t"
...
This reverts commit 5e1eac3f74
2019-06-30 15:56:55 +02:00
5e1eac3f74
Code optimization - Change for(uint8_t in for (uint32_t
...
Code optimization - Change for(uint8_t in for (uint32_t
2019-06-30 15:47:32 +02:00
4413a757d8
TLS+AWS IoT optimization for speed, code and memory footprint
2019-06-19 09:49:48 +02:00
12da2fd6f9
Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
...
Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
2019-06-16 16:43:23 +02:00
2b5c691041
6.5.0.16 Refactor TLS and Add visibility toggle to GUI password
...
6.5.0.16 20190611
* Refactored TLS based on BearSSL, warning breaking change for fingerprints validation (see doc)
* Add checkbox to GUI password field enabling visibility during password entry only (#5934 )
2019-06-11 14:30:07 +02:00
006462f17e
Refactored TLS based on BearSSL - cleaned
2019-06-10 12:06:03 +02:00
d3eaf7491d
Fix exception 9 when syslog is enabled and NTP is just synced
...
Fix exception 9 when syslog is enabled and NTP is just synced (#5917 )
2019-06-09 13:34:14 +02:00
53ecde7637
Add command SetOption65 0/1 and more Tuya Serial based device support
...
Add command SetOption65 0/1 and more Tuya Serial based device support (#5815 )
2019-06-08 11:38:45 +02:00
aaacb20d55
Merge pull request #5815 from thirug010/development
...
New Tuya Serial Based Devices support
2019-06-08 11:17:27 +02:00
7fdbd81def
Fix setting seriallog using web gui (old) regression
...
Fix setting seriallog using web gui (old) regression
2019-06-03 17:05:09 +02:00
b078d10bf4
Fix compilation error
...
Fix compilation error
2019-05-27 14:17:31 +02:00
22663fc10c
6.5.0.13 Add command SetOption38 6..255
...
6.5.0.13 20190527
* Add command SetOption38 6..255 to set IRReceive protocol detection sensitivity mimizing UNKNOWN protocols (#5853 )
2019-05-27 11:56:14 +02:00
5beaea32fd
global update fix
2019-05-22 12:22:58 +02:00
c55ad6bd39
Merge branch 'development' into development
2019-05-22 01:30:43 -05:00
763118b626
6.5.0.12 Add support for link LED and four power LEDs
...
6.5.0.12 20190521
* Add AriLux RF control GPIO option "ALux IrSel" (159) replacing "Led4i" (59) for full LED control (#5709 )
* Add LED GPIO option "LedLink" (157) and "LedLinki" (158) to select dedicated link status LED (#5709 )
* Add support for up to four LEDs related to four power outputs. Enabled when "LedLink(i)" is configured too (#5709 )
* Add extended LED power control using command LedPowerX where X is 1 to 4. Enabled when "LedLink(i)" is configured too (#5709 )
2019-05-21 18:11:39 +02:00
d599f21758
Add defines USE_EMULATION_WEMO and USE_EMULATION_HUE
...
* Remove define USE_EMULATION from my_user_config.h (#5826 )
* Add defines USE_EMULATION_WEMO and USE_EMULATION_HUE to my_user_config.h to control emulation features at compile time (#5826 )
2019-05-20 15:09:42 +02:00
1a6acf5078
Remove redundant call
...
Remove redundant call
2019-05-20 10:25:49 +02:00
6b013144ab
Updated the code based on the feedback
...
* Updated xdrv_01_webserver.ino to show dimmer slider2 by default for Tuya Dimmer Module
* Updated xdrv_16_tuyadimmer.ino remove the use of XdrvMailbox and removed the pow functions now the size for 6.5.0 build is 510kb
* updated sonoff.ino to hold current device id
2019-05-18 18:13:57 -05:00
ba41a2ada5
update scripter
2019-05-18 09:45:04 +02:00
d59d631e40
New Tuya Serial Based Devices support
...
Updated the Code to support most of the new Tuya Serial devices like 4Gang Serail switch, 1 Dimmer + 1 relay, 3 Gang ...
2019-05-17 22:03:53 -05:00
f9ca25755b
Add experimental light sensor code to ADC0
...
Add experimental light sensor code to ADC0. See xsns_02_analog.ino for information.
2019-05-16 18:43:23 +02:00
038079a865
Add rule support for single JSON value pair
...
Add rule support for single JSON value pair like {"SSerialReceived":"on"} by expanding it to {"SSerialReceived":{"Data":"on"}} allowing for trigger SSerialReceived#Data=on (#5638 )
2019-05-15 16:31:13 +02:00
0b6c62f5f9
Add support for Shelly 1PM Template
...
Add support for Shelly 1PM Template {"NAME":"Shelly 1PM","GPIO":[56,0,0,0,82,134,0,0,0,0,0,21,0],"FLAG":2,"BASE":18} (#5716 )
2019-05-13 18:26:07 +02:00
ad54ece2fb
6.5.0.10 Enable ADC0 by default
...
6.5.0.10 20190513
* Enable ADC0 by default in my_user_config.h (#5671 )
* Add user configurable ADC0 to Module and Template configuration compatible with current FLAG options (#5671 )
2019-05-13 15:56:01 +02:00
e8e7b25b80
6.5.0.9 Add command SetOption63
...
6.5.0.9 20190418
* Add command SetOption63 0/1 to disable relay state feedback scan at restart (#5594 , #5663 )
* Fix TasmotaSerial at 9600 bps solving DFPlayer comms (#5528 )
* Fix Shelly 2.5 overtemp
2019-04-18 16:24:46 +02:00
5e810f1ff3
Add Shelly 2.5 overtemp functionality
...
* Add all temperature, humidity and pressure for global access
* Add Shelly 2.5 overtemp functionality
* Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592 )
2019-04-15 18:12:42 +02:00
4fa4397ab5
6.5.0.8 Fixes syslog and SerialDelimiter
...
6.5.0.8 20190413
* Fix use of SerialDelimiter value 128 (#5634 )
* Fix lost syslog connection regression from 6.5.0.4
2019-04-13 15:52:32 +02:00
2ec7d1853e
Merge pull request #5634 from revk/development
...
Fix use of SerialDelimiter value 128
2019-04-13 15:44:46 +02:00
11146c2225
Fix lost syslog connection regression from 6.5.0.4
...
Fix lost syslog connection regression from 6.5.0.4
2019-04-13 15:12:25 +02:00
7d055b2271
Fix use of SerialDelimiter value 128
...
This was allowing printable characters when set to 128, but also allowed all characters that are not 128.
2019-04-13 06:51:11 +01:00
a454ab71de
Update LedMask info
...
- Add hexadecimal info to command LedMask
- Add LedMask to Status
2019-04-10 15:02:38 +02:00
df6645481e
6.5.0.7 Add command LedMask
...
6.5.0.7 20190410
* Add command LedMask to assign which relay has access to power LED (#5602 , #5612 )
2019-04-10 14:26:36 +02:00
be385ecb5c
Add command WebColor
...
* Add rule Http#Initialized
* Add command WebColor to change non-persistent GUI colors on the fly
Use a rule like:
rule3 on http#initialized do webcolor {"webcolor":["#eeeeee","#181818 ","#4f4f4f","#000000 ","#dddddd","#008000 ","#222222 ","#ff0000","#008000 ","#ffffff","#1fa3ec","#0e70a4","#d43535","#931f1f","#47c266","#5aaf6f","#ffffff","#999999 ","#000000 "]} endon
or
rule3 on http#initialized do webcolor {"webcolor":["#eee","#181818 ","#4f4f4f","#000 ","#ddd","#008000 ","#222 "]} endon
to make color changes persistent)
2019-04-08 22:37:39 +02:00
ce53ee07e7
Fix template activation and/or module selection regression from 6.5.0.4 ( #5598 )
...
Fix template activation and/or module selection regression from 6.5.0.4 (#5598 )
2019-04-08 13:26:17 +02:00
c673ea1728
Make MI Desk Lamp optional
...
Make MI Desk Lamp optional
2019-04-05 15:41:01 +02:00
5e1cbcf94f
Make MI Desk Lamp optional
...
Make MI Desk Lamp optional
2019-04-05 15:27:06 +02:00
82ef09b684
Make MI Desk Lamp default off
...
Mi Desk Lamp can be activated in my_user_config.h by setting uncommenting //#define ROTARY_V1
2019-04-05 08:41:26 +02:00
2aad0567bf
Change some defines to const
...
Change some defines to const
2019-03-30 16:29:27 +01:00
Theo Arends
Stephan Hadinger
gemu2015
thirug010
RevK
Jason2866