mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
8,551 Commits 12 Branches 111 Tags 1.1 GiB
Commit Graph

90 Commits

Author SHA1 Message Date
Theo Arends 7a73dd7019 Merge branch 'development' into dev-gpio16 2020-09-30 14:54:29 +02:00
Theo Arends c00d7035d9 Redesign GPIO to 16-bit 2020-09-29 18:10:21 +02:00
Theo Arends 9cbd2d531d Initial GPIO redesign 2020-09-25 18:15:31 +02:00
Theo Arends 27caccf7a0 Remove ArduinoJson in favour of JSMN 
Remove ArduinoJson library in favour of JSMN library
 2020-09-25 11:33:12 +02:00
Stephan Hadinger 019e402fe7 Move IR from ArduinoJson to JSMN 2020-09-24 08:51:43 +02:00
Theo Arends 423b4c0712 Workaround compilation regression 
Workaround compilation regression (#9223)
 2020-09-03 20:31:31 +02:00
Stephan Hadinger f8f0f4f616 Reduce memory usage of BackLog 2020-09-03 15:11:14 +02:00
Theo Arends 4724fa2c49 Add support for DYP ME007 
Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113)
 2020-08-17 16:25:24 +02:00
Theo Arends 1eea0978ed Change Fast Reboot Cycle prefix 2020-08-13 17:15:57 +02:00
Theo Arends f268697e54 Add command ``Restart 2`` to halt system 
Add command ``Restart 2`` to halt system. Needs hardware reset or power cycle to restart (#9046)
 2020-08-10 16:19:44 +02:00
Theo Arends a5857ac03f Add masterlog_level to control master log level control 2020-07-31 11:53:12 +02:00
Theo Arends 934ca43463 Remove Arduino ESP8266 Core support before 2.7.1 
Remove Arduino ESP8266 Core support for versions before 2.7.1
 2020-07-17 11:49:56 +02:00
Theo Arends 6b0870343b Change to limited support of Arduino IDE 
Change to limited support of Arduino IDE as an increasing amount of features cannot be compiled with Arduino IDE
 2020-07-16 18:21:19 +02:00
Theo Arends 06c06705dd Fix minimal binary fast reboot issue 2020-07-15 16:09:32 +02:00
Theo Arends cc301e9395
Merge pull request #8837 from gemu2015/scripter-update 
Scripter update
 2020-07-02 18:18:41 +02:00
Theo Arends 0cc1dd957b Add SO98 to control user rotary support 2020-07-02 18:13:14 +02:00
gemu2015 67b3702b0b Update tasmota.ino 2020-07-02 06:48:07 +02:00
gemu2015 64bd9f1974 scripter fixes 2020-07-02 06:46:04 +02:00
Theo Arends 83b6665c39 Rotary experiments 2020-07-01 10:24:46 +02:00
Theo Arends 9ac4502c78 Rotary experiments 2020-07-01 10:22:20 +02:00
Theo Arends 7dafeb280e Rename global temp and pressure 
- Rename global temp and pressure (#8808, #8810)
- Fix SGP30 calculation (#8808)
 2020-06-28 12:23:18 +02:00
Theo Arends 83bbe757db Add command ``Module2`` 
Add command ``Module2`` to configure fallback module on fast reboot (#8464)
 2020-06-17 14:06:46 +02:00
gemu2015 865769767d scripter call >BS after sensor init 2020-06-16 10:36:16 +02:00
Theo Arends ef0b797686 Add basic support for ESP32 ethernet 
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503)
 2020-06-15 18:27:04 +02:00
Theo Arends cdf7aa74bf Add rule trigger ``System#Init`` 
Add rule trigger ``System#Init`` to allow early rule execution without wifi and mqtt initialized yet (#8673)
 2020-06-14 12:36:44 +02:00
Theo Arends 0abfcf1954 Fix global temperature 
- Fix global temperature use of float solving intermittend power off (#8175)
- Fix BL0940 power monitoring when powered on but no load present
 2020-06-12 16:51:21 +02:00
Stephan Hadinger 1d68fe9bc6 Cleaned TLS options and prepare for TELEGRAM 2020-06-10 20:14:46 +02:00
Theo Arends aafa0862ab Refactor LedPwm code 2020-05-23 13:09:16 +02:00
George e21cbfdc5d More sensible behaviour 
* When setting PWM values, updates all the LEDs (instant response). Uses led_power values.
* If LEDLINK not set, but LED1 is, LED1 is the status led. When turning on/off, setledlink uses digitalwrite (which does not respect the new pwm operation). In this case only, we will use the setledpoweridx instead of digitalwrite - costly (every 250ms this runs), but edge case / legacy. Allows more intuitive operation - if we blink an LED with the max and min PWM limits, we'd expect it to respect these. In this case, blink will also now update the led_power status, which keeps this accurate e.g. if ledpower 1 cmnd was sent, then blink occurred, led_state would read a 1 for that bit but the led would be off (but nothing was reading it for status so it didn't cause any trouble). Leaving digitalwrite when LEDLINK is defined as this is more efficient and the use case for pwm leds is to find buttons - link indicator would become more ambiguous for no benefit.
 2020-05-20 13:23:53 +10:00
Theo Arends d7f6c78ed9 Add command ``DeviceName`` 
Add command ``DeviceName`` defaults to FriendlyName1 and replaces FriendlyName1 in GUI
 2020-05-17 17:10:17 +02:00
Theo Arends 4aa1c18d82 Revert uart buffer size increase 
Revert uart buffer size increase but visit uart buffer reads more often to solve possible uart buffer overrun caused by sleep
 2020-05-11 16:45:22 +02:00
Theo Arends 125ee62ff3 Add Serial buffer overrun detection 
Add Serial buffer overrun detection and fix serial corruption by increasing uart serial buffer to 520
 2020-05-11 15:27:29 +02:00
Theo Arends 892be892fa Remove gpio to pin support 2020-05-01 17:37:56 +02:00
Theo Arends 5d18ad1c74 Add experimental basic support for ESP32 
- Add experimental basic support for Tasmota on ESP32 based on work by Jörg Schüler-Maroldt
- Bump version to 8.2.0.6
- This ESP32 upgrade breaks current ESP32 templates
 2020-05-01 17:30:09 +02:00
Theo Arends 7177c7d8e0 Change ESP32 pin allocation part 4 2020-05-01 16:47:41 +02:00
Theo Arends d805803daa Change pin array names 
Change pin array names to block unwanted use of direct access
 2020-04-29 14:01:02 +02:00
Theo Arends c24de18278 Change ESP32 pin allocation part 1 2020-04-28 18:27:07 +02:00
Theo Arends 60e7a73b60 Switch from GPIO array to Pin array 2020-04-28 14:42:47 +02:00
Theo Arends c9149b53c5 Change pin handling part 1 2020-04-26 17:33:27 +02:00
Theo Arends 104e3c4838 Implement ARRAY_SIZE macro 2020-04-25 11:37:36 +02:00
Theo Arends 9ed8e7c254 Fix internal array size checks 2020-04-24 17:39:26 +02:00
Theo Arends 684b7dc3a4 Update ESP32 optional brownout disable 2020-04-18 16:34:29 +02:00
Theo Arends b70ca01231 Add ESP32 optional brownout disable 
Add ESP32 brownout disable for weak onboard LDO's - eventually you'll need to change the LDO to a better one.
 2020-04-17 18:27:31 +02:00
Theo Arends e8f3d1d986 Increase ESP32 compatibility 
Increase ESP32 compatibility (breaks current ESP32 configuration again!)
 2020-04-13 17:45:06 +02:00
Theo Arends 93fd5dd618 Add experimental minimal support for ESP32 
Add experimental minimal support for ESP32 (#8110)
 2020-04-10 18:24:08 +02:00
Theo Arends a0b0c32ff4 Update references 2020-04-10 10:52:22 +02:00
Theo Arends d1b1585d1c Prep for easier preconfigurations 2020-04-09 15:32:23 +02:00
Paul C Diem d16f1a7a0f Add Light skip_light_fade flag and Dimmer3 command, Ignore MCU dimmer changes after sending dimmer command 2020-03-05 18:15:58 -06:00
Theo Arends 0ce89e53e3 Fix Arduino IDE compile error 2020-03-02 17:48:19 +01:00
Paul C Diem a550fe3ac7 Use newly allocated settings and flag 2020-02-24 16:34:45 -06:00