Commit Graph

171 Commits

Author SHA1 Message Date
Theo Arends 49f0b514eb Fix some exceptions and watchdogs
* Fix some exceptions and watchdogs due to lack of stack space - part 2
 * Add command SetOption62 0/1 to disable retain on Button or Swith hold messages (#5299)
 * Add option WifiConfig 7 to allow reset of device in AP mode without admin password (#5297)
2019-02-22 12:04:05 +01:00
netpok e2bcef16bf Merge remote-tracking branch 'upstream/development' into wificonfig-7 2019-02-21 19:45:34 +01:00
netpok 731154cc9b Handle authentication on reset/restart 2019-02-21 19:45:03 +01:00
netpok 4993d16ecb Implement WifiConfig 7 2019-02-21 17:49:11 +01:00
netpok e035a3253a Add password validation to WebUI 2019-02-21 15:58:37 +01:00
Theo Arends 95da493325 Update xdrv_01_webserver.ino
Fix compile error
2019-02-21 14:56:39 +01:00
Theo Arends 05b0280019 6.4.1.18 - Fix some exceptions and watchdogs
6.4.1.18 20191221
 * Fix some exceptions and watchdogs due to lack of stack space - part 1 (#5215)
2019-02-21 14:31:31 +01:00
Theo Arends cfd3f3f4f5 Fix WebSend compile warning
Fix WebSend compile warning
2019-02-21 09:48:58 +01:00
Theo Arends 06c97c4e19 Fix command WebSend
Fix command WebSend intermittent results (#5273)
2019-02-19 12:51:38 +01:00
Theo Arends a6c7e3b5f4 Update xdrv_01_webserver.ino
Force restart on any template change to fix page refresh hang (#5222)
2019-02-18 15:13:37 +01:00
Theo Arends 483eb4dd44 Change Flags to Options
Change Flags to Options and enforce Activate for already active template (#5256)
2019-02-18 13:10:10 +01:00
Theo Arends 8d2b9e4734 Update xdrv_01_webserver.ino
Tune webserver
2019-02-18 11:35:49 +01:00
Theo Arends a201dd1222 Remove command SetOption62
Remove command SetOption62 as it's functionality is replaced by user changing the device template (#5255)
2019-02-17 16:05:53 +01:00
Theo Arends 3f6db36187 Update xdrv_01_webserver.ino
Fix 404 error
2019-02-17 14:43:07 +01:00
Theo Arends 577791440e Add Configure Template menu option
Add Configure Template menu option to GUI (#5222)
2019-02-17 11:32:53 +01:00
Jason e6029e18be Fix typos. 2019-02-16 12:51:43 +00:00
Jason 02f1052440 Amended wifi password UI to show "****".
Only store passwords which are not equal to "****".
Removes previous behaviour where wifi password with an asterisk was
ignored.
2019-02-16 12:48:16 +00:00
Theo Arends 4e3d2c63db Fix timer GUI tab colors
Fix timer GUI tab colors
2019-02-13 17:30:07 +01:00
Theo Arends 74affa1440 Fix Edge and Safari margins
Fix Edge and Safari margins
2019-02-13 16:26:16 +01:00
Theo Arends c39e2da6b5 Update GUI
Update GUI
2019-02-13 16:05:25 +01:00
Theo Arends 567bc93623 Add Template GUI update
Initial support for online template change using command Template or GUI Configure Other (#5177)
2019-02-12 11:55:47 +01:00
Theo Arends 98ae3eaf54 6.4.1.16 Online template change
6.4.1.16 20190211
 * Initial support for online template change using command Template (#5177)
2019-02-11 19:21:49 +01:00
Theo Arends ae277f59cf Change image defines
6.4.1.15 20190208
 * Change image name BE_MINIMAL to FIRMWARE_MINIMAL (#5106)
 * Change image names USE_xyz to FIRMWARE_xyz (#5106)
2019-02-08 14:55:45 +01:00
Erik afe797fd6e Improve weblog robustness 2019-02-07 20:42:46 +01:00
Theo Arends b839d7e80e Add user configuration of MCP39F501
Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
2019-02-04 18:18:47 +01:00
Theo Arends 48faabc1cf Revert "Add user configuration of MCP39F501"
This reverts commit c340e2b8bd.
2019-02-04 18:17:50 +01:00
Theo Arends c340e2b8bd Add user configuration of MCP39F501
Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
2019-02-04 18:17:17 +01:00
Theo Arends 0c747a7499 Split module and GPIO ajax list
Split module and GPIO ajax list
2019-02-02 15:16:35 +01:00
Theo Arends 304ac6fe44 6.4.1.12 code changes (byte/boolean)
6.4.1.12 20190128
 * Change code use of boolean to bool and byte to uint8_t
 * Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
Theo Arends 2e101839a4 Change web authentication
Change web authentication (#4865)
2019-01-10 12:57:42 +01:00
Theo Arends a23f01080b 6.4.1.8 Add template flags
6.4.1.8 20190107
 * Change sonoff_template.h layout regarding optional module flags like ADC0
 * Add command SetOption62 1 to force no Button/Switch pullup on dedicated modules. Currently only supported on Shelly2 (#4841)
2019-01-07 16:33:18 +01:00
Theo Arends f66de3111e Housekeeping 2019-01-03 18:07:03 +01:00
Theo Arends 447ec6256e 6.4.1.4 Update Copyright (C) 2019
6.4.1.4 20190101
 * Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
Theo Arends 7ebb7a6067 6.4.1.3 Change sonoff_template.h
6.4.1.3 20181229
 * Change sonoff_template.h module lay-out by removing non-configurable GPIOs
2018-12-29 19:46:28 +01:00
Theo Arends afe83a3460 Prep for template tuning 2018-12-29 17:19:13 +01:00
Theo Arends 0b10f48e41 6.4.1.1 Fix most compiler warnings
6.4.1.1 20181224
 * Fix most compiler warnings
2018-12-24 18:14:25 +01:00
Theo Arends 77c07a2e00 Change FallbackTopic
Change FallbackTopic from cmnd/<mqttclient>/ to cmnd/<mqttclient>_fb/ to discriminate from Topic (#1528)
2018-12-23 14:48:57 +01:00
Theo Arends e2cd656286 6.4.0.3 Hass and Alexa fixes
6.4.0.3 20181222
 * Change Hass discovery to short MQTT messages as used by Hass 0.81 and up (#4711)
 * Change FallbackTopic detection (#4706)
 * Add define WIFI_SOFT_AP_CHANNEL in my_user_config.h to set Soft Access Point Channel number between 1 and 13 as used by Wifi Manager web GUI (#4673)
 * Fix Alexa "this value is outside the range of the device". Needs power cycle and Alexa deletion/discovery cycle. (#3159, #4712)
2018-12-22 16:13:07 +01:00
Joel Stein 9737ec560c webserver: swap index and name in module configuration 2018-12-17 16:33:07 +01:00
Theo Arends dfa0d2ef11 Add Domoticz Selector for Fanspeed
Add support for iFan02 Fanspeed in Domoticz using a selector (#4517)
2018-12-06 10:49:49 +01:00
Theo Arends c3f07f0bd2 Fix WifiManager functionality
Fix WifiManager functionality on initial installation (#4433)
2018-11-26 17:00:18 +01:00
Theo Arends 9608bfd2e5
Update xdrv_01_webserver.ino 2018-11-24 12:04:30 +01:00
andrethomas ef4e2b297c
Decrease update webui refresh to 5 seconds
Decrease update webui refresh to 5 seconds
2018-11-24 13:00:45 +02:00
andrethomas a6983d52f7
Increase delays before web ui is refreshed
The current 5-second delay before refreshing web ui after settings were changed is not always sufficient as wifi can take up to 10 seconds to re-connect and be available on some wireless networks, depending on the device's RSSI.

This change increases the delay from 5 seconds to 10 seconds which have been tested down to RSSI levels of 25 to be sufficient.

This change also increases the refresh delay when a local OTA is uploaded to 20 seconds which allows enough time for the cp: process to complete and the device to reconnected to wifi under >= 25 RSSI conditions.
2018-11-24 12:46:32 +02:00
Theo Arends 23c16e58a9 Housekeeping
Housekeeping
2018-11-20 15:00:24 +01:00
Theo Arends e34a1f0719 Add wifi network scan
* Add command SetOption56 0/1 to enable wifi network scan and select highest RSSI (#3173)
2018-11-19 18:07:25 +01:00
Theo Arends 4899178362 6.3.0.10 Add command SetOption36
6.3.0.10 20181118
 * Add command SetOption36 0..255 milliseconds (10 default) to tune main loop dynamic delay
2018-11-18 16:49:02 +01:00
Theo Arends 877771c90a 6.3.0.8 Stop enforcing dout
6.3.0.8 20181115
 * Stop enforcing flashmode dout. Still mandatory but this a chk for possible future flash corruption
2018-11-15 14:55:45 +01:00
andrethomas 4a7e7b0dbb Change C functions with () to (void) 2018-11-14 15:32:09 +02:00
Theo Arends e2dd11b0bc Consolidate LTrim into Trim
Consolidate LTrim into Trim
2018-11-12 12:33:49 +01:00
Theo Arends d3f5c8978b Update command WebSend
* Change command WebSend Host header field from IP address to hostname (#4331)
 * Add to command WebSend option to send a direct path when command starts with a slash (#4329)
2018-11-12 11:13:05 +01:00
Theo Arends 406907cbe2 Revert "Update command WebSend"
This reverts commit 59c5817214.
2018-11-12 11:11:22 +01:00
Theo Arends 59c5817214 Update command WebSend
* Change command WebSend Host header field from IP address to hostname (#4331)
 * Add to command WebSend option to send a direct path when command starts with a slash (#4329)
2018-11-12 11:10:55 +01:00
Theo Arends 41aafe05ae Change command WebSend
Change command WebSend Host header field from IP address to hostname (#4331)
2018-11-12 10:20:30 +01:00
Theo Arends 671231053a More webserver GUI tuning
More webserver GUI tuning
2018-11-10 17:30:23 +01:00
Theo Arends 827dd62f61 Fix GUI Configure Module regression
Fix GUI Configure Module regression (#4319)
2018-11-10 16:45:32 +01:00
Theo Arends 9872f942ae 6.3.0.6 Change GUI page load
6.3.0.6 20181110
 * Change GUI Configure Module by using AJAX for data fetch to cut page size (and memory use) by 40%
2018-11-10 15:10:58 +01:00
Theo Arends f9bddb6c54 Add flashchipid info
Add flashchipid info
2018-11-08 10:40:19 +01:00
Theo Arends 61985ca16b Add hex to flash info 2018-11-07 18:43:44 +01:00
Theo Arends c75ae78d88 6.3.0.5 Add code image
6.3.0.5 20181107
 * Add code image and optional commit number to version
2018-11-07 15:03:41 +01:00
Theo Arends 9fef82736d Prep drivers for management
Prep drivers for management
2018-11-07 10:30:03 +01:00
Theo Arends c9cf375c6c Add checks for GPIO selections
Add more strict checks for GPIO selections
2018-11-05 17:27:02 +01:00
Theo Arends 99ae0c9cab Change wifi connection check
Change wifi connection check
2018-11-04 18:00:07 +01:00
Theo Arends cc56677ba3 Add Gui Hostname display
Add command SetOption53 0/1 to toggle gui display of Hostname and IP address
2018-10-29 12:21:27 +01:00
Theo Arends 3f4320b95d Add optional HX711 GUI
Add optional HX711 scale interface to web GUI demonstrating easy GUI plug-in
2018-10-21 16:30:05 +02:00
Theo Arends fe26768103 6.2.1.15 Fix Color Temperature slider
6.2.1.15 20181012
 * Fix Color Temperature slider functionality regression from 20180726 (#4037)
 * Add auto reload of main web page to some web restarts
2018-10-12 11:42:52 +02:00
Theo Arends fcc6d5437b Add HX711 Load Cell
* Add support for DS3231 Real Time Clock
 * Add support for HX711 Load Cell
 * Add command WeightRes 0..3 to control display of decimals for kilogram
2018-10-11 17:33:07 +02:00
Theo Arends ac595d44b0 Fix compiler error
Fix compiler error on BE_MINIMAL not finding WaitForRestart()
2018-10-11 08:32:09 +02:00
Theo Arends b3039de1b6 6.2.1.14 Rewrite Webserver
6.2.1.14 20181010
 * Rewrite Webserver page handler for easier extension (thx to Adrian Scillato)
2018-10-10 22:21:44 +02:00
Theo Arends 633a45f964 Revert "6.2.1.14 Webserver rewrite"
This reverts commit 077b8a79e1.
2018-10-10 19:41:08 +02:00
Theo Arends 077b8a79e1 6.2.1.14 Webserver rewrite
6.2.1.14 20181010
 * Rewrite Webserver page handler for easier extension (thx to Adrian Scillato)
2018-10-10 16:40:54 +02:00