sfromis
4e7c991f3d
Fix off by one error
...
Oops, warning about too old python script came when it should not.
2021-05-12 23:20:16 +02:00
sfromis
972e39b607
Expand decode-status to support all feature bits
...
Output of decode-status.py lacks information about the latest two new sets of feature bits, due to the constant for array size not being updated when the array was expanded. Code changed to avoid this magical number, but instead check size of array with texts, and array with features from the JSON format in Status 4, using the lowest number to provide as many bits as both Tasmota version and Python code supports. A warning is printed if the number of feature bits from Tasmota is higher than supported in the current iteration of Python code.
Based on history, I'm assuming that updates are first done in arendst/Tasmota development, later replicated to tasmota/Tasmota-decode-status. If wrong, I can move the change there.
2021-05-12 18:44:13 +02:00
Theo Arends
f50c3f8f62
Admin USE_ENERGY_DUMMY
2021-04-06 12:08:07 +02:00
Theo Arends
b0689af803
Add optional DS18x20 arithmetic mean
...
Add command ``SetOption126 1`` to enable DS18x20 arithmetic mean over teleperiod for JSON temperature based on (#11472 )
2021-04-02 11:43:31 +02:00
Theo Arends
be72bde8f5
Add ESP32 support for internal Hall Effect sensor
...
Add ESP32 support for internal Hall Effect sensor connected to both GPIO36 and GPIO39 only
2021-03-27 15:15:15 +01:00
Theo Arends
dd4f16526e
Fix sensor coexistence
2021-03-23 12:57:56 +01:00
RaphDaMan
587ad9a733
Squashed commit of the following:
...
commit 6c9c4a83d0076bb9303d65d5435f0d0bf2e81a6b
Author: RaphDaMan <raphael@my107.de>
Date: Sat Mar 20 13:49:36 2021 +0100
v0.7 Final and ready to PR.
2021-03-20 14:14:07 +01:00
Jan Bubík
c6673d4081
new feature: LCD/DLP Projector Serial Control
...
- implemented as XDRV53
- user must configure GPIO pins "DLP Rx" and "DLP Tx" for serial communication
- emulates an additional RELAY by sending ON/OFF commands to Projector
- continually polls the Projector's state to update virtual RELAY state
- blocks RELAY1 in ON state while Projector is running (to protect the lamp)
- serial codes for NEC and OPTOMA, ready for more manufacturers
- tested with NEC V300W
2021-02-27 22:28:29 +01:00
Theo Arends
9edccbbca5
Add commands ``StateRetain`` and ``InfoRetain`` ( #11084 )
2021-02-22 13:59:45 +01:00
Theo Arends
14206e46a1
Add support for TM1637 seven segment display by Ajith Vasudevan ( #10889 )
2021-02-17 12:32:36 +01:00
Norbert Richter
435be84ff3
Add SDM72 Modbus energy meter
2021-02-09 16:13:40 +01:00
Theo Arends
6108076eec
Prepare feature additions
2021-01-22 17:15:58 +01:00
Theo Arends
c934a20b4f
Add support for TOF10120
...
Add support for TOF10120 time of flight sensor by Cyril Pawelko (#10190 )
2021-01-22 16:48:41 +01:00
Norbert Richter
8387c14dfc
Add NeoPool feature
2021-01-20 15:06:59 +01:00
Theo Arends
2dbd1ef973
Add support for 24/26/32/34 bit RFID Wiegand
...
Add support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther (#3647 , #10565 )
2021-01-16 15:39:33 +01:00
Theo Arends
f6d7c5c578
Update changelog
2021-01-11 14:13:20 +01:00
Theo Arends
98b529ce7b
Update decode-status.py
2021-01-07 15:12:07 +01:00
Theo Arends
6b16745cf0
Support UFILESYS
2021-01-06 14:41:23 +01:00
Theo Arends
d028e5c847
Update changelog
2021-01-03 17:04:14 +01:00
Theo Arends
ee1648d3e0
Prep SSD1331 driver
2021-01-01 16:05:06 +01:00
Theo Arends
54c1a2d029
Add support for SPI display driver for ST7789 TFT
...
Add support for SPI display driver for ST7789 TFT by Gerhard Mutz (#9037 )
2021-01-01 15:05:58 +01:00
Theo Arends
fc93b05476
Happy New Year
2021-01-01 13:57:04 +01:00
Theo Arends
59992d1954
Add support for FTC532 8-button touch controller
...
Add support for FTC532 8-button touch controller by Peter Franck (#10222 )
2020-12-22 16:47:24 +01:00
Theo Arends
5892cffbda
Prep RC522 rfid reader pt2
2020-11-30 17:54:40 +01:00
Theo Arends
7f1f9727ef
Update comments
2020-11-29 15:59:40 +01:00
Theo Arends
c02770ce96
Add support for Shelly Dimmer 1 and 2
...
Add support for Shelly Dimmer 1 and 2 by James Turton (#9854 )
2020-11-14 16:43:32 +01:00
Theo Arends
203124d678
Add command ``SetOption115 1`` to enable ESP32 MiBle
...
Add command ``SetOption115 1`` to enable ESP32 MiBle
2020-11-13 17:00:44 +01:00
Theo Arends
3334fe58ed
Prep AS608/R503 FIngerprint sensor support
2020-11-10 15:04:45 +01:00
Theo Arends
e498b28864
Add support for EZO PMP sensors
...
Add support for EZO PMP sensors by Christopher Tremblay (#9760 )
2020-11-07 11:35:33 +01:00
Theo Arends
8376dd8982
Fix switches
2020-11-04 16:31:53 +01:00
Theo Arends
54f9532919
Add command ``SetOption114 1``
...
Add command ``SetOption114 1`` to detach Swiches from Relays and enable MQTT action state for all the SwitchModes
2020-11-03 14:34:02 +01:00
Theo Arends
67bd5daf45
Update changelog
2020-11-02 11:58:23 +01:00
Theo Arends
db863c4589
Add support for EZO FLO
...
Add support for EZO FLO sensors by Christopher Tremblay (#9697 )
2020-11-01 15:15:10 +01:00
Theo Arends
6f7a20e2ec
Add support for EZO PRS sensors
...
Add support for EZO PRS sensors by Christopher Tremblay (#9659 )
2020-10-29 11:53:25 +01:00
Theo Arends
85d2626e84
Refactor feature list build
2020-10-28 11:37:59 +01:00
Theo Arends
b92b59b2b1
Add command ``SetOption113 1``
...
Add command ``SetOption113 1`` to set dimmer low on rotary dial after power off (#8263 )
2020-10-25 12:59:24 +01:00
Theo Arends
582c32f5b9
Add support for EZO EC sensor
...
Add support for EZO EC sensors by Christopher Tremblay (#9613 )
2020-10-24 12:41:08 +02:00
Theo Arends
1021cf3ca5
Update changelog and releasenotes
2020-10-23 16:56:03 +02:00
Theo Arends
500fb147c4
Add Breaking Changed to Release Notes
...
- Support for EZO RTD sensors by Christopher Tremblay (#9585 )
- On ZigbeeBridge support for glowing led when permit join is active (#9581 )
- Support for PWM Dimmer multi-press and ledmask (#9584 )
2020-10-20 14:04:29 +02:00
Theo Arends
38e2638f07
Add support for EZO Ph and ORP sensors
...
Add support for EZO Ph and ORP sensors by Christopher Tremblay (#9567 )
2020-10-18 15:36:17 +02:00
Theo Arends
330109d67c
Add optional support for Orno WE517
...
Add optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353 )
2020-10-02 16:37:43 +02:00
Theo Arends
760d702fd0
Add optional support for Mitsubishi Electric HVAC
...
Add optional support for Mitsubishi Electric HVAC by David Gwynne (#9237 )
2020-10-02 15:10:21 +02:00
Theo Arends
5cf40fc059
Add support for VL53L1X time of flight sensor
...
Add support for VL53L1X time of flight sensor by Johann Obermeier
2020-09-29 11:27:53 +02:00
Theo Arends
afd197d493
Add command ``SetOption111 1``
...
Add command ``SetOption111 1`` to enable frequency output for buzzer GPIO (#8994 )
2020-09-15 11:44:09 +02:00
Staars
1b56a97298
update to newest version
2020-09-12 19:28:25 +02:00
Staars
a62ff5176e
add mlx90640 to configs
2020-09-12 19:16:36 +02:00
Theo Arends
201bad3eb0
Prep release 8.5
2020-09-06 18:41:39 +02:00
Theo Arends
4724fa2c49
Add support for DYP ME007
...
Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113 )
2020-08-17 16:25:24 +02:00
Theo Arends
f2aa0607b4
Prep support for SO114 until SO145
2020-08-13 16:59:51 +02:00
Theo Arends
48c268a920
Update decode-status.py
2020-07-21 12:17:29 +02:00
Theo Arends
6843f58a91
Add support for Schneider Electric iEM3000
...
Add support for Schneider Electric iEM3000 series Modbus energy meter by Marius Bezuidenhout
2020-07-14 17:37:14 +02:00
Theo Arends
b8afa11743
Update decode-status.py to python 3.x
2020-07-04 17:39:56 +02:00
Theo Arends
1866938cbd
Integrate prometheus
2020-06-27 11:52:44 +02:00
Theo Arends
934526244f
Add support for single wire LMT01
...
Add support for single wire LMT01 temperature Sensor by justifiably (#8713 )
2020-06-17 17:22:41 +02:00
Theo Arends
7c785ab056
Add support for Energy sensor (Denky)
...
Add support for Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers
2020-06-17 15:00:48 +02:00
Theo Arends
715697cb32
Add ESP32 ethernet commands
...
Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3`` (#8503 )
2020-06-16 18:36:49 +02:00
Theo Arends
ef0b797686
Add basic support for ESP32 ethernet
...
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503 )
2020-06-15 18:27:04 +02:00
Robert Jaakke
9835c55203
Merge branch 'development' into HP303B
...
# Conflicts:
# tasmota/support_features.ino Resolved
# tools/decode-status.py Resolved
2020-06-11 21:56:27 +02:00
Theo Arends
4c5b2f37fd
Add initial support for Telegram
...
Add initial support for Telegram bot (#8619 )
2020-06-11 17:30:33 +02:00
Robert Jaakke
601317d5f3
Merge branch 'development' into HP303B
...
# Conflicts:
# tasmota/support_features.ino Resolved
# tools/decode-status.py Resolved
2020-06-08 09:01:43 +02:00
Theo Arends
c6fede2bf4
Basic support for BL0940
...
Basic support for BL0940 (#8175 )
2020-06-07 17:21:29 +02:00
Robert Jaakke
6667951505
Working sample
2020-06-06 22:35:41 +02:00
device111
8c29ead09d
Add support for up to eight MCP9808 temperature sensors
2020-06-02 08:35:49 +02:00
Theo Arends
86921e60b2
Add support for VEML6075 and VEML7700
...
- Add support for VEML6075 UVA/UVB/UVINDEX Sensor by device111 (#8432 )
- Add support for VEML7700 Ambient light intensity Sensor by device111 (#8432 )
2020-05-22 15:16:01 +02:00
Theo Arends
2a6de09396
Change ESP32 GUI GPIO index display
2020-05-07 18:10:54 +02:00
Theo Arends
dbd0020033
Add webcam
2020-05-07 16:55:26 +02:00
Theo Arends
d78ca09c30
Integrate OpenTherm and WindMeter
2020-05-07 16:03:27 +02:00
Theo Arends
4536746d03
Update Changelog and Release notes
2020-04-28 11:09:56 +02:00
Theo Arends
45e9408b73
Add support for AS3935 Lightning Sensor
...
Add support for AS3935 Lightning Sensor by device111 (#8130 )
2020-04-11 14:51:08 +02:00
Theo Arends
13d7943b58
Add support for Seven Segment display
...
Add support for Seven Segment display using HT16K33 (#8116 )
2020-04-10 16:05:43 +02:00
Staars
90be0804eb
add iAQ-core air quality sensor
2020-04-09 14:22:44 +02:00
Theo Arends
5235ad1757
Add support for HDC1080
...
Add support for HDC1080 Temperature and Humidity sensor by Luis Teixeira (#7888 )
2020-03-14 12:43:02 +01:00
Theo Arends
a8e369e5ce
Update feature information
2020-03-05 14:00:47 +01:00
Theo Arends
473892d5c9
Add updated experimental Sonoff D1 support
...
Add updated experimental Sonoff D1 support (#7598 )
2020-03-01 15:31:08 +01:00
Theo Arends
3343164da9
Add support for MaxBotix HRXL-MaxSonar
...
Add support for MaxBotix HRXL-MaxSonar ultrasonic range finders by Jon Little (#7814 )
2020-03-01 14:20:19 +01:00
Theo Arends
94f5321db4
Fix keeloq functionality
2020-02-28 16:35:19 +01:00
Theo Arends
5cfe247611
Change default my_user_config.h driver and sensor support
...
Change default my_user_config.h driver and sensor support removing most sensors and adding most drivers
2020-02-27 15:10:42 +01:00
Theo Arends
f706b7c490
Add support for Wemos Motor Shield V1
...
Add support for Wemos Motor Shield V1 by Denis Sborets (#7764 )
2020-02-22 12:18:20 +01:00
Theo Arends
f674feb0ef
Add initial support for Sensors AHT1x
...
Add initial support for Sensors AHT10 and AHT15 by Martin Wagner (#7596 )
2020-02-20 13:38:03 +01:00
Theo Arends
af63bb363d
Add support for FiF LE-01MR energy meter
...
Add support for FiF LE-01MR energy meter by saper-2 (#7584 )
2020-02-10 15:18:11 +01:00
Theo Arends
15df54bb07
Add support for HM-10
...
Add support for MI-BLE sensors using HM-10 Bluetooth 4.0 module by Christian Staars (#7683 )
2020-02-07 10:50:06 +01:00
Theo Arends
287b3b97f1
Fix some display issues
...
- Fix LCD line and column positioning (#7387 )
- Fix Display handling of hexadecimal escape characters (#7387 )
2020-01-01 15:13:58 +01:00
Theo Arends
be29e71c96
Update decode-status.py
2019-12-30 14:24:00 +01:00
Leonid Muravjev
782414c35d
ds1624: support for ds1621 and ds1624
...
[x] the I2C address reservation implemented.
[x] multiple sensors any combination with 8 addresses
[x] with and without HotPlug support
2019-12-27 22:56:16 +03:00
Theo Arends
fb8bb1223a
Add support for GPS as NTP server
...
Add support for GPS as NTP server by Christian Baars and Adrian Scillato
2019-12-23 15:39:07 +01:00
Theo Arends
72849f672e
Add support for DHT12
...
- Fix DeepSleep in case there is no wifi by Stefan Bode (#7213 )
- Add support for DHT12 Temperature and Humidity sensor by Stefan Oskamp
2019-12-20 15:48:40 +01:00
Theo Arends
ac065867d3
Add command ``SetOption77 0/1``
...
Add command ``SetOption77 0/1`` to keep power on when slider is far left
2019-11-29 13:11:35 +01:00
Theo Arends
20c2f4238c
Prep for release 7.1
2019-11-13 10:17:52 +01:00
Theo Arends
e89b76adc7
Add support for Honeywell HPMA115S0
...
Add support for Honeywell HPMA115S0 particle concentration sensor by David Hunt (#6843 )
2019-11-06 14:05:17 +01:00
Theo Arends
6395db9963
Add support for Honeywell I2C HIH series
...
Add support for Honeywell I2C HIH series Humidity and Temperetaure sensor (#6808 )
2019-11-02 17:18:51 +01:00
Theo Arends
20370820b8
Update decode-status.py
2019-10-31 17:41:54 +01:00
Theo Arends
50e1038c05
Add support for SetOption82-113
2019-10-31 12:12:48 +01:00
Theo Arends
dccf6fb7cd
Add command SetOption74 0/1
...
Add command SetOption74 0/1 to enable DS18x20 internal pull-up and remove define DS18B20_INTERNAL_PULLUP (#6795 )
2019-10-30 22:22:18 +01:00
Theo Arends
2dabaa3d20
Add command SetOption73 0/1 to re-enable CORS
...
Add command SetOption73 0/1 to re-enable HTTP Cross-Origin Resource Sharing (CORS) now default disabled (#6767 )
2019-10-28 13:36:04 +01:00
Theo Arends
0e07397ff7
Change Sonoff-Tasmota to Tasmota
2019-10-27 12:04:08 +01:00
Theo Arends
7ecc752c11
Remove command SetOption2
2019-10-22 18:34:41 +02:00
Theo Arends
1110bac410
Houskeeping Arduino Slave
2019-10-21 12:36:08 +02:00
Theo Arends
4e45e660f2
Add support for EX-Store WiFi Dimmer V4
...
Add support for EX-Store WiFi Dimmer V4 (#5856 )
2019-10-18 17:29:19 +02:00
Theo Arends
84fe7b8e76
Bump version to 6.6.0.20
...
Add command SetOption65 0/1 to disable (1) fast power cycle detection fixing unwanted brownout trigger
2019-10-18 15:18:39 +02:00
Theo Arends
a62432f6eb
Fix USE_A4988_STEPPER compilation
2019-10-17 15:28:46 +02:00