mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
8,775 Commits 10 Branches 111 Tags 1.1 GiB
Commit Graph

155 Commits

Author SHA1 Message Date
Paul C Diem f075a89d6b Add PWM Dimmer multi-press and ledmask support 2020-10-19 20:12:41 -05:00
Theo Arends 7bc8956d86 Changed management of serial baudrate 
Changed management of serial baudrate (#9554)
 2020-10-16 15:18:16 +02:00
Theo Arends 074aec0a23 Adjust command ``NoDelay`` 2020-10-15 15:33:17 +02:00
Paul C Diem d5216091e7 Add PWM Dimmer color change/trigger on tap and SO88 brightness led support. Add DGR WITH_LOCAL flag support. 2020-10-05 15:15:32 -05:00
Theo Arends d13b4c8448 Add some thoughts 2020-10-05 12:23:07 +02:00
Theo Arends 96b2c8010e Change ``Status`` command output for disabled status types 
Change ``Status`` command output for disabled status types
 2020-10-05 11:45:58 +02:00
Theo Arends 7a73dd7019 Merge branch 'development' into dev-gpio16 2020-09-30 14:54:29 +02:00
Theo Arends 1ae9adc642 Change redesigning ESP8266 GPIO internal numbering 
Change redesigning ESP8266 GPIO internal numbering in line with ESP32
 2020-09-30 14:19:18 +02:00
Theo Arends c00d7035d9 Redesign GPIO to 16-bit 2020-09-29 18:10:21 +02:00
Theo Arends 9cbd2d531d Initial GPIO redesign 2020-09-25 18:15:31 +02:00
Theo Arends bbd15fa174 Fix Status13 shutter exception 9 2020-09-23 17:13:10 +02:00
Theo Arends 765cbe6289 Fix Status13 shutter json and exception 9 2020-09-23 16:51:38 +02:00
stefanbode b7565811db
Adding new shuttermode 2020-09-05 20:45:42 +02:00
Stephan Hadinger f8f0f4f616 Reduce memory usage of BackLog 2020-09-03 15:11:14 +02:00
Theo Arends 0f1e4fc917 Add command ``PowerDelta1`` to ``PowerDelta3`` 
- Bump version to 8.4.0.3
- Add command ``PowerDelta1`` to ``PowerDelta3`` to trigger on up to three phases (#9134)
 2020-08-23 18:29:16 +02:00
Theo Arends 474fb2518a Update status 13 2020-08-20 17:58:58 +02:00
stefanbode 9a3fe2d0bb
Update support_command.ino 2020-08-20 16:24:17 +02:00
Theo Arends 4724fa2c49 Add support for DYP ME007 
Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113)
 2020-08-17 16:25:24 +02:00
Stephan Hadinger d31e720291 Add Virtual CT for 4 channels lights, emulating a 5th channel 2020-08-15 19:24:57 +02:00
Federico Leoni 612e2be2db SO59 support for Power0 2020-08-14 11:43:50 -03:00
Theo Arends 18bf102e4f Prep support for SO114 until SO145 2020-08-13 16:49:11 +02:00
Stephan Hadinger b0188642b1 Change triple-mode TLS via configuration in a single firmware (TLS AWS IoT, Letsencrypt and No-TLS) 2020-08-12 17:20:37 +02:00
Charles 48a346c443 Added SetOption102 to switch between mode 2020-08-11 19:57:39 +02:00
Theo Arends f268697e54 Add command ``Restart 2`` to halt system 
Add command ``Restart 2`` to halt system. Needs hardware reset or power cycle to restart (#9046)
 2020-08-10 16:19:44 +02:00
Theo Arends 1d990ad091 Fix ESP32 PWM range 2020-08-03 11:52:25 +02:00
Theo Arends ac780d5e9a
Merge pull request #8937 from grob6000/serialsend6 
Serialsend6 - comma-separated decimal send as binary
 2020-07-21 12:23:53 +02:00
Theo Arends a84ebe552a Refactor rules processing 2020-07-20 17:24:51 +02:00
George 8a4a0d67ff serialsend6 - fixes 
Forgot to fix top condition
 2020-07-20 10:08:20 +10:00
George 63242de249 Serialsend6 
* Adds serialsend6, allowing sending of binary data with comma-delimited string of decimal numbers.
 2020-07-19 20:34:43 +10:00
Sammy BAUER b7c7943b00
ESP32 port: JSON error 
A double quote is missing in the JSON response of the status command, so the result is not valid for ESP32.
 2020-07-14 16:07:35 +02:00
Theo Arends 0315ef3a3c Add some comments to led commands 2020-07-04 15:40:38 +02:00
Federico Leoni 03db100197 TuyaMCU baud rate 2020-06-29 11:01:55 -03:00
Theo Arends 7dafeb280e Rename global temp and pressure 
- Rename global temp and pressure (#8808, #8810)
- Fix SGP30 calculation (#8808)
 2020-06-28 12:23:18 +02:00
Theo Arends ff327106be Refactor ESP32 support 2020-06-24 15:58:56 +02:00
Theo Arends 7c8b06ce16 Add compile time interlock parameters 
Add compile time interlock parameters (#8759)
 2020-06-22 22:36:54 +02:00
halfbakery 2e43715343 SwitchDebounce flags should be added to every valid imeout values 2020-06-21 20:46:37 +02:00
Theo Arends b5f45aa295 Fix ESP32 SPI config 2020-06-20 17:58:21 +02:00
Norbert Richter 9b44a369d8
Fix some json unescapes 2020-06-19 12:33:31 +02:00
Theo Arends 83bbe757db Add command ``Module2`` 
Add command ``Module2`` to configure fallback module on fast reboot (#8464)
 2020-06-17 14:06:46 +02:00
Theo Arends ef0b797686 Add basic support for ESP32 ethernet 
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503)
 2020-06-15 18:27:04 +02:00
Theo Arends 0abfcf1954 Fix global temperature 
- Fix global temperature use of float solving intermittend power off (#8175)
- Fix BL0940 power monitoring when powered on but no load present
 2020-06-12 16:51:21 +02:00
Theo Arends 56c491050e Fix AP switch 
Fix AP switch (#8635)
 2020-06-09 11:25:43 +02:00
Theo Arends 29070f1136 Add ``CpuFrequency`` and ``FlashFrequency`` to status 0 
- Add ``CpuFrequency`` to ``status 2``
- Add ``FlashFrequency`` to ``status 4``
 2020-05-30 14:59:52 +02:00
Staars 7e28e03d78 add commands to touch pin button on ESP32 2020-05-30 13:50:22 +02:00
Theo Arends 90d3cd45c4 Add command ``Time 4`` 
Add command ``Time 4`` to display timestamp using milliseconds (#8537)
 2020-05-25 11:44:17 +02:00
Theo Arends ca8b38d0d0 Add LedPwm commands 
Add commands ``LedPwmOn 0..255``, ``LedPwmOff 0..255`` and ``LedPwmMode1 0/1`` to control led brightness by George (#8491)
 2020-05-23 15:17:13 +02:00
Theo Arends dc9ce42888 Refactor LedPwm code 2020-05-23 13:04:17 +02:00
George e780f25283 Gamma correction 
Implement changes proposed by @s-hadinger review.
* Use 0-255 range in settings
* Apply gamma correction from xdrv_light & use changuintscale helper fn (as per pwm light routine)
 2020-05-23 17:13:04 +10:00
George 603b628f97 Add pwm mode masking 
* Extra setting & command to set - allows masking of pwm mode. Use case is for leds attached to buttons for seeing at night; this way user can combine both pwm and digital leds (i.e. pwm for the button leds but non-button status leds can stay on/off).
 2020-05-20 13:23:54 +10:00
George e21cbfdc5d More sensible behaviour 
* When setting PWM values, updates all the LEDs (instant response). Uses led_power values.
* If LEDLINK not set, but LED1 is, LED1 is the status led. When turning on/off, setledlink uses digitalwrite (which does not respect the new pwm operation). In this case only, we will use the setledpoweridx instead of digitalwrite - costly (every 250ms this runs), but edge case / legacy. Allows more intuitive operation - if we blink an LED with the max and min PWM limits, we'd expect it to respect these. In this case, blink will also now update the led_power status, which keeps this accurate e.g. if ledpower 1 cmnd was sent, then blink occurred, led_state would read a 1 for that bit but the led would be off (but nothing was reading it for status so it didn't cause any trouble). Leaving digitalwrite when LEDLINK is defined as this is more efficient and the use case for pwm leds is to find buttons - link indicator would become more ambiguous for no benefit.
 2020-05-20 13:23:53 +10:00