Commit Graph

14 Commits

Author SHA1 Message Date
Theo Arends c835235141 v5.12.0n - Change ADS1115 and Counter JSON
5.12.0n
 * Change ESP8266 Analog JSON message from {"Analog0:123"} to
{"ANALOG":{"A0:123"}} to accomodate rules (#2560)
 * Change Counter JSON
message from {"Counter1":0,"Counter3":0} to {"COUNTER":{"C1":0,"C3":0}}
to accomodate rules
 * Change ADS1115 JSON message from
{"ADS1115":{"Analog0":123,"Analog1":123}} to
{"ADS1115":{"A0":123,"A1":123}}
2018-04-28 15:55:38 +02:00
arendst 5639b6d966 v5.10.0f
5.10.0f
 * Differentiate between JSON text defines and other text
defines to allow for English JSON while using different locale (#1449)

* Fix display of build date and time in non-english locale (#1465)
2017-12-29 14:35:05 +01:00
arendst 67d8fa0d64 v5.10.0c
5.10.0c
 * Consolidate device serial (MH-Z19, SenseAir and Pzem004T)
into TasmotaSerial library
 * Consolidate PWM device recognition
 * Fix
Wemo Emulation (#1357)
 * Add support for Arilux LC06 (#1414)
2017-12-25 17:41:12 +01:00
arendst 7723d52453 Add support for SenseAir S8 CO2 sensor
* Add support for SenseAir S8 CO2 sensor to be enabled with define
USE_SENSEAIR in user_config.h
 * Add support for Domoticz Air Quality
sensor to be used by MH-Z19(B) and SenseAir sensors
2017-12-22 14:55:24 +01:00
arendst 0129fc9825 Change some output to JSON Array (#1363)
* Change output to valid JSON Array if needed (#1363)
2017-12-18 18:20:28 +01:00
arendst c04fcd0dcf Add support for BME680
5.10.0a
 * Add (experimental) support for sensor SHT3x
 * Add support
for sensor MH-Z19(B) using serial interface to be enabled with define
USE_MHZ19 in user_config.h (#561, #1248)
 * Add (experimental) support
for sensor MH-Z19(B) using SoftwareSerial to be enabled with define
USE_MHZ19 in user_config.h (#561, #1248)
 * Add support for iTead SI7021
temperature and humidity sensor by consolidating DHT22 into AM2301 and
using former DHT22 as SI7021 (#735)
 * Fix BME280 calculation (#1051)
 *
Add support for BME680 using adafruit libraries (#1212)
 * Change
ADS1115 default voltage range from +/-2V to +/-6V (#1289)
 * Add
multipress support and more user configurable options to Sonoff Dual R2
(#1291)
 * Fix Sonoff Bridge missed learned key if learned data contains
0x55 (End of Transmission) flag (#1095, #1294)
 * Add support for
TSL2561 using adafruit library (#661, #1311)
 * Add alternative support
for SHT3x (#1314)
2017-12-06 17:14:41 +01:00
arendst 253d60fd2b Add experimental SI7021 support
* Add (experimental) support for iTead SI7021 temperature and humidity
sensor (#735)
 * Change ADS1115 default voltage range from +/-2V to
+/-6V (#1289)
2017-12-03 14:06:15 +01:00
arendst c102fc5f9e v5.10.0a - Fixes ADS1115 and Sonoff Dual R2
5.10.0a
 * Add (experimental) support for sensor SHT3x
 * Change ADS1115
default voltage range from +/-2V to +/-4V (#1289)
 * Add multipress
support and more user configurable options to Sonoff Dual R2 (#1291)
2017-12-02 12:40:33 +01:00
arendst 5731c975e4 Revert "v5.10.0a - Fixes ADS1115 and Sonoff Dual R2"
This reverts commit 73547c8bd7.
2017-12-02 12:38:50 +01:00
arendst 73547c8bd7 v5.10.0a - Fixes ADS1115 and Sonoff Dual R2
5.10.0a
 * Add (experimental) support for sensor SHT3x
 * Change ADS1115
default voltage range from +/-2V to +/-4V (#1289)
 * Add multipress
support and more user configurable options to Sonoff Dual R2 (#1291)
2017-12-02 12:38:29 +01:00
arendst 0f531e24e5 v5.9.1j - Add Dual R2, Rewrite DS18x20 and fixes
5.9.1j
 * Revert changes to xsns_05_ds18x20.ino and rename to
xsns_05_ds18x20_legacy.ino still needing library OneWire and providing
legacy JSON message:
 *
"DS18x20":{"DS1":{"Type":"DS18B20","Address":"284CC48E04000079","Temperature":19.5},"DS2":{"Type":"DS18B20","Address":"283AC28304000052","Temperature":19.6}}

* Add new xdrv_05_ds18x20.ino free from library OneWire and add the
following features:
 *  Add support for DS1822
 *  Add forced setting of
12-bit resolution for selected device types (#1222)
 *  Add read
temperature retry counter (#1215)
 *  Fix lost sensors by performing
sensor probe at restart only thereby removing dynamic sensor probe
(#1215)
 *  Fix sensor address sorting using ascending sort on sensor
type followed by sensor address
 *  Rewrite JSON resulting in shorter
message allowing more sensors in default firmware image:
 *
"DS18B20-1":{"Id":"00000483C23A","Temperature":19.5},"DS18B20-2":{"Id":"0000048EC44C","Temperature":19.6}

* Add additional define in user_config.h to select either single sensor
(defines disabled), new multi sensor (USE_DS18X20) or legacy multi
sensor (USE_DS18X20_LEGACY)
 * Add support for Sonoff Dual R2 (#1249)
 *
Fix ADS1115 detection (#1258)
2017-11-27 17:46:51 +01:00
arendst 299bed1c05 v5.9.1f - Update libraries and a fix
5.9.1f
 * Upgrade library ArduinoJson to 5.11.2
 * Upgrade library
IRRemoteEsp8266 to 2.2.1 + 2 commits but tweaked some protocols to keep
code usage small
 * Upgrade library NeoPixelBus to 2.2.9
 * Upgrade
library OneWire to 2.3.3 + 6 commits
 * Formalize library PubSubClient
to 2.6 + 9 commits and additional delay
 * Add optional ADS1115 driver
as alternative for unsupported I2Cdevlib in esp8266-core 2.4.0-rc2
 *
Fix wrong response name for command HlwISet (#1214)
2017-11-19 18:02:03 +01:00
arendst 83a9c0693a v5.9.1b - Add INA219 support
5.9.1b
 * Remove spaces in JSON messages
 * Add support for INA219
Voltage and Current sensor to be enabled in user_config.h
2017-11-11 12:33:30 +01:00
arendst 19533cc995 v5.9.0b - Fixes and add ADS1115 A/D converter
5.9.0b
 * Add support for ADS1115 to be enabled in user_config.h and
needs libraries i2cdevlib-Core and i2cdevlib-ADS1115 (#338, #660)
 * Fix
Exception 26 and empty console screen after usage of command
WakeupDuration (#1133)
 * Fix some changed iTead web links in README.md
(#1137)
2017-11-07 15:57:24 +01:00