714f938c05
Refactor energy commands
...
* Refactor energy commands
* Add define USE_ENERGY_MARGIN_DETECTION to disable Energy Margin and Power Limit detection
* Add define USE_ENERGY_POWER_LIMIT to disable Energy Power Limit detection while Energy Margin detection is active
2019-08-01 15:46:12 +02:00
64521b42b6
Add Epoch and UptimeSec to JSON messages
...
Add Epoch and UptimeSec to JSON messages (#6068 )
2019-07-11 14:09:42 +02:00
0243e2be7e
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90
...
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90 (#6036 )
2019-07-08 14:16:33 +02:00
4e95417db4
Add reset of Energy values when connection to sensor is lost for over 4 seconds
...
Add reset of Energy values when connection to sensor is lost for over 4 seconds (#5874 , #5881 )
2019-05-30 12:45:02 +02:00
4d070bfb15
Change default PowerDelta from 80% to 0% on new installations
...
Change default PowerDelta from 80% to 0% on new installations (#5858 , #5028 , #4813 , #4130 , #4145 , #3795 , #3778 , #3660 , #3648 )
2019-05-24 15:04:48 +02:00
a623d1e90b
Add temp test
...
Add temp test
2019-05-22 12:31:23 +02:00
e472d3232a
Add device OverTemp (>73 Celsius) detection to selected Energy Monitoring devices
...
* Fix Sonoff Pow R2 / S31 invalid energy increments (#5789 )
* Add device OverTemp (>73 Celsius) detection to any Energy Monitoring device with temperature sensor powering off all outputs
2019-05-14 17:46:40 +02:00
0b6c62f5f9
Add support for Shelly 1PM Template
...
Add support for Shelly 1PM Template {"NAME":"Shelly 1PM","GPIO":[56,0,0,0,82,134,0,0,0,0,0,21,0],"FLAG":2,"BASE":18} (#5716 )
2019-05-13 18:26:07 +02:00
5e810f1ff3
Add Shelly 2.5 overtemp functionality
...
* Add all temperature, humidity and pressure for global access
* Add Shelly 2.5 overtemp functionality
* Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592 )
2019-04-15 18:12:42 +02:00
eb9617e3f9
Tune some functionality
...
Tune some functionality
2019-03-30 13:03:45 +01:00
6922e657d9
Shrink code/flash space
...
Shrink code/flash space
2019-03-23 17:00:59 +01:00
b7f89c0a8c
6.5.0.1 Change GUI data collection
...
6.5.0.1 20190319
* Change Web GUI sensor data collection
2019-03-19 17:31:43 +01:00
06a9fbd792
Changed logging message handling
...
Changed logging message handling
2019-03-08 15:15:42 +01:00
f0a7a1f2a1
Fix Energy TotalStartTime
...
Fix Energy TotalStartTime when commands EnergyReset0 and/or EnergyReset3 used (#5373 )
2019-03-01 12:08:41 +01:00
b839d7e80e
Add user configuration of MCP39F501
...
Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
2019-02-04 18:18:47 +01:00
48faabc1cf
Revert "Add user configuration of MCP39F501"
...
This reverts commit c340e2b8bd
2019-02-04 18:17:50 +01:00
c340e2b8bd
Add user configuration of MCP39F501
...
Add user configuration of MCP39F501 Energy Monitoring as used in Shelly2
2019-02-04 18:17:17 +01:00
304ac6fe44
6.4.1.12 code changes (byte/boolean)
...
6.4.1.12 20190128
* Change code use of boolean to bool and byte to uint8_t
* Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
41351001f5
6.4.1.6 Re-introduce Cal commands
...
6.4.1.6 20190105
* Add commands PowerCal, VoltageCal and CurrentCal for HLW8012, HJL01 and BL0937 based energy sensors
2019-01-05 15:39:56 +01:00
447ec6256e
6.4.1.4 Update Copyright (C) 2019
...
6.4.1.4 20190101
* Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
c1102a4863
6.4.0.2 Fix possible dtostrf bos
...
6.4.0.2 20181221
* Fix possible dtostrf buffer overflows by increasing buffers
2018-12-21 16:17:06 +01:00
23c16e58a9
Housekeeping
...
Housekeeping
2018-11-20 15:00:24 +01:00
4a7e7b0dbb
Change C functions with () to (void)
2018-11-14 15:32:09 +02:00
15148f290d
6.3.0.4 Add SetSensorXX
...
6.3.0.4 20181106
* Add command SetSensorXX 0/1 to disable/re-enable compiled xsns_XX_sensor.ino driver
2018-11-06 17:33:51 +01:00
e6a8b2d30d
Add TotalStartTime to Energy JSON
...
Add TotalStartTime to Energy JSON message (#3971 )
2018-10-30 17:04:19 +01:00
f05a471e48
Fix KNX compile error
2018-09-28 17:02:55 +02:00
4b7c797fb7
6.2.1.9 Apparent/Reactive Power
...
6.2.1.9 20180928
* Add Apparent Power and Reactive Power to Energy Monitoring devices (#251 )
2018-09-28 15:48:42 +02:00
7a767f104c
6.2.1.6 Remove some commands
...
6.2.1.6 20180922
* Removed commands PowerCal, VoltageCal and CurrentCal as more functionality is provided by commands PowerSet, VoltageSet and CurrentSet
* Allow decimals as input to commands PowerSet, VoltageSet and CurrentSet
* Add support for PCA9685 12bit 16pin hardware PWM driver (#3866 )
2018-09-22 15:09:53 +02:00
f7a8b1f923
Shelly2 clean up
...
Shelly2 clean up
2018-09-21 16:02:56 +02:00
4065a215f0
Add Shelly2 Energy Monitoring
...
Add energy monitoring to Shelly2 (#2789 )
2018-09-21 15:22:17 +02:00
ff4f8f75c1
Add uncalibrated energy monitor
...
Add uncalibrated energy monitoring to Shelly2 (#2789 )
2018-09-17 20:32:38 +02:00
7cd9224819
6.2.1.3 - Change drop down list
...
6.2.1.3 20180907
* Change web Configure Module GPIO drop down list order for better readability
* Fix showing Period Power in energy threshold messages
* Fix ButtonRetain to not use default topic for clearing retain messages (#3737 )
2018-09-08 17:18:31 +02:00
f517755303
Prep for frequency display
...
Prep for energy frequency display and update xnrg_05_pzem2.ino with correct register values
2018-09-07 18:15:47 +02:00
b441c85776
Experimental PZEM-003,014,016,017
...
Add experimental support for PZEM-003,014,016,017 Energy monitoring (#3694 )
2018-09-06 17:35:57 +02:00
07dafe1631
6.2.0.2 - Energy monitoring
...
6.2.0.2 20180904
* Rewrite energy monitoring using energy sensor driver modules
* Fix lost today and total energy value after power cycle (#3689 )
2018-09-04 16:22:34 +02:00
e20c2b056a
Added Optional Retain Flag for Energy Margins
...
Request #3612
2018-08-27 18:35:23 -03:00
035bc29475
Fix EnergyReset3
...
Fix EnergyReset3 (#2723 )
2018-08-23 17:38:17 +02:00
6d1ce5bd69
Fix SDM120 wrong values
...
Fix SDM120 reporting wrong negative values to Domoticz (#3521 )
2018-08-19 13:00:27 +02:00
e15aeabbcf
Fix Pow R2 / S31 buffer sync
...
Fix Pow R2 / S31 buffer sync
2018-08-13 11:33:33 +02:00
ee9b26ecfa
6.1.1.5 - Fix Pow R2 and S31
...
Fix some Pow R2 and S31 checksum errors using optimized re-sync
2018-08-12 16:15:03 +02:00
75284f09fe
Re-fix S31/Pow R2 serial sync
...
Re-fix S31/Pow R2 energy data serial sync (#3425 )
2018-08-11 15:47:27 +02:00
2058b9fa95
Updated to v6.1.0a
...
Updated to v6.1.0a
2018-07-06 18:00:50 +02:00
8f60a88a20
Add support for BlitzWolf BW-SHP2
...
Add support for BlitzWolf BW-SHP2 (and Homecube, Gosund SP1) Energy
Monitoring Smart Socket (#2223 )
2018-07-02 14:25:02 +02:00
d4119fe54d
Add SnfBrdg EFM8BB1 fw tools
...
6.0.0a
* Add support for uploading Sonoff Bridge firmware found in
tools/fw_efm8bb1 folder build by Portisch using Web Gui File Upload
(#2886 )
* Add command RfRaw to control Portisch firmware features
2018-06-04 18:10:38 +02:00
cec701fb33
Fix Pzem004T checksum error
...
6.0.0a
* Fix Pzem004T checksum error
2018-06-03 14:43:17 +02:00
ed56322f12
Add command source information
...
5.14.0b
* Add source information to command execution to be shown with logging
option 3 (#2843 )
2018-05-28 15:52:42 +02:00
b8edfddd7e
Fix Pow R2 and S31 checksum error
...
Fix Pow R2 and S31 checksum error (#1907 )
2018-05-27 14:13:14 +02:00
80ffea085b
Admin and some fixes
...
5.14.0a
* Add KNX energy data (#2750 )
* Fix display selection of
un-available GPIO options in Module Configuration webpage (#2718 )
* Fix
IRSend not accepting data value of 0 (#2751 )
2018-05-17 11:55:40 +02:00
187b7ac375
Add Energy Information for KNX
...
Add Energy Information for KNX
2018-05-17 01:44:46 -03:00
c51bcd77d1
Add Hardware Serial Fallback to TasmotaSerial
...
5.13.1a
* Update TasmotaSerial to 2.0.0 allowing Hardware Serial Fallback when
correct connection are configured
2018-05-10 17:21:26 +02:00
Theo Arends
andrethomas
Adrian Scillato
Theo Arends