mirrors
/
Tasmota
mirror of https://github.com/arendst/Tasmota.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
4,492 Commits 6 Branches 113 Tags 1.2 GiB
Commit Graph

173 Commits

Author SHA1 Message Date
Theo Arends 5527f424a0 Add deep sleep support 
Add define USE_DEEPSLEEP and command DeepSleepTime 0 or 10..86400 (seconds) to enter deepsleep mode (#6638)
 2019-10-14 16:12:59 +02:00
Theo Arends 86ffa2d5fe Fix JSON and functionality 
Fix JSON and functionality
 2019-10-11 11:23:53 +02:00
Shantur Rathore 01f6df9161 Add DimmerRange command and support longer dimmer ranges. Fixes #6605 
More and more serial dimmers are coming up with different dimming ranges, implemented DimmerRange command to make this setting generic and bring support for 2 byte dimming ranges which isn't supported by SetOptions.
 2019-10-10 15:53:01 +01:00
Theo Arends 0f72a93170 Add command SetOption34 0..255 to set backlog delay 
Add command SetOption34 0..255 to set backlog delay. Default value is 200 (mSeconds) (#6562)
 2019-10-09 17:52:52 +02:00
Theo Arends 8d17301433 Redesign light driver phase 3 
Redesign light driver phase 3
 2019-10-08 17:46:03 +02:00
Shantur Rathore f946ebaf7b Dimmer: Change SetOption43 (Dimmer Max) generic instead of Tuya only 2019-10-02 11:11:50 +01:00
Theo Arends aa5b5e891e Add initial support for PCF8574 I2C I/O Expander 
Add initial support for PCF8574 I2C I/O Expander (currently output only) by Stefan Bode
 2019-10-01 16:33:39 +02:00
Theo Arends e40475b563 Add initial support for shutters 
Add initial support for shutters by Stefan Bode (#288)
 2019-09-29 18:00:01 +02:00
Theo Arends b7aa3cd884 Add initial support for MQTT logging 
Add initial support for MQTT logging using command MqttLog <loglevel> (#6498)
 2019-09-27 18:13:00 +02:00
Theo Arends 5bd19d54db Change command Tariffx to allow time entries like 23 (hours), 1320 (minutes) or 23:00 
Change command Tariffx to allow time entries like 23 (hours), 1320 (minutes) or 23:00. NOTE: As this is development branch previous tariffs are lost! (#6488)
 2019-09-25 14:24:49 +02:00
Theo Arends 15024fa348 Add Tariff export values to JSON message 
Add Tariff export values to JSON message (#6429)
 2019-09-22 14:00:34 +02:00
Theo Arends 7b70c042bd Add command ModuleAddress 1/2/3 
Add command ModuleAddress 1/2/3 to set Pzem module address when a single module is connected (#2315)
 2019-09-16 16:56:16 +02:00
Theo Arends 4b647928aa Bump version to 6.6.0.12 
* Redesign command Tariff to now default to 0 (=disabled) and allowing to set both Standard Time (ST) and Daylight Savings Time (DST) start hour (#6282)
 *  Commands Tariff1 23 = Tariff1 ST, Tariff2 7 = Tariff2 ST, Tarriff3 22 = Tarrif1 DST, Tariff4 6 = Tariff2 DST, Tariff9 0/1 = Weekend toggle
 2019-09-10 16:18:23 +02:00
Theo Arends 53235a3382 Redesign Energy Total calculation 
* Redesign Energy Total calculation
* Increase SDM120 modbus interval time to 200mS (#6282)
 2019-09-06 18:02:31 +02:00
Theo Arends ab89bb53a9 Oops 
Oops
 2019-09-05 17:45:43 +02:00
Theo Arends 282591a0b2 Bump version to 6.6.0.10 
Redesign Tuya support by Shantur Rathore (#6353)
 2019-09-05 10:41:08 +02:00
Theo Arends f88e87cfde Refactor and document power control 
Refactor and document power control
 2019-09-04 12:20:04 +02:00
Theo Arends f4b5e565ef Add driver USE_SDM120_2 with Domoticz P1 Smart Meter functionality as future replacement for USE_SDM120 - Pls test and report 
Add driver USE_SDM120_2 with Domoticz P1 Smart Meter functionality as future replacement for USE_SDM120 - Pls test and report (#6282)
 2019-09-01 17:51:25 +02:00
Theo Arends b363bb55a9 Add compile time define USE_WS2812_HARDWARE to select hardware type WS2812, WS2812X, WS2813, SK6812, LC8812 or APA106 (DMA mode only) 
Add compile time define USE_WS2812_HARDWARE to select hardware type WS2812, WS2812X, WS2813, SK6812, LC8812 or APA106 (DMA mode only)
 2019-08-30 14:35:08 +02:00
Theo Arends 48783a4772 Add define USE_WS2812_BTYPE to select different bitbang timing 
Add define USE_WS2812_BTYPE to select different bitbang timing (#6292)
 2019-08-29 18:03:30 +02:00
Theo Arends f31b903fab Bump version to 6.6.0.8 
* Add Tuya Energy monitoring by Shantur Rathore
 * Add phase 1 Domoticz P1 Smart Meter support using energy sensors handled by xdrv_03_energy.ino based on an idea by pablozg
 *   Add commands Tariff1 0..23 (start Off-Peak hour), Tariff2 0..23 (start Standard hour) and Tariff3 0/1 (Saturday and Sunday Off-Peak)
 2019-08-27 17:01:12 +02:00
Shantur Rathore 231a1ba137 Tuya Serial: Add support for power metering 
Capable Tuya serial devices send power metering data over serial interface. User needs to identify the ids of all power metering functions and set as
SetOption44 -> Voltage
SetOption45 -> Current
SetOption46 -> Power
 2019-08-27 10:50:34 +01:00
Shantur Rathore 579f68cf2f Tuya Dimmer: Add support for dimmers with max 24 
New Tuya Dimmer has dim values from 0 to 24. Currently the code expects it to be 0-100 or 0-255.
With this change we move the flag to a param and use that to calculate correct dim percentage.

This change also makes sure to update settings on version upgrade.
 2019-08-27 10:46:27 +01:00
Theo Arends 427dee028d Fix compile error 
Fix compile error
 2019-08-25 17:30:12 +02:00
Theo Arends ef63883a1c Refactor Button, Switch and Rotary to save code space 
Refactor Button, Switch and Rotary to save code space
 2019-08-17 16:19:58 +02:00
Theo Arends 38c6254833 Refactor light driver saving code space 
Refactor light driver saving code  space
 2019-08-17 13:17:30 +02:00
Theo Arends 9746489380 Bump version to 6.6.0.5 
* Add command WebSensor<sensor number> 0/1 to control display of sensor data in web GUI (#6085)
 * Change some table locations from RAM to Flash
 2019-08-16 16:12:33 +02:00
Theo Arends 23ec00a452 Add command Buzzer 
Add command Buzzer with optional parameters <number of beeps>,<duration of beep in 100mS steps>,<duration of silence in 100mS steps> enabled when a buzzer is configured (#5988)
 2019-08-12 17:18:08 +02:00
Stephan Hadinger c9139514d0 Add ZigBee support phase 1 - low level MQTT ZNP messages for CC2530 devices 2019-08-09 22:52:33 +02:00
Theo Arends afb39aa680 Add support for CHIRP soil moisture sensor by Christian Baars 
Add support for CHIRP soil moisture sensor by Christian Baars
 2019-08-07 12:08:13 +02:00
Stephan Hadinger 81ca44dba2 Add SetOption68 to enable multi-channel PWM instead of a single light (#6134) 2019-08-06 10:57:50 +02:00
Theo Arends 49022d0320 6.6.0.2 Add support for Sonoff iFan03 as module 71 
Add support for Sonoff iFan03 as module 71 (#5988)
 2019-07-14 15:23:02 +02:00
Theo Arends 0243e2be7e Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90 
Add command SetOption42 0..255 to set over temperature in Celsius. Defaults to 90 (#6036)
 2019-07-08 14:16:33 +02:00
Theo Arends 86314e24e5 Fix ambiguous Tuya set relay option by adding command SetOption41 allowing to control number of virtual relays 
Fix ambiguous Tuya set relay option by adding command SetOption41 allowing to control number of virtual relays (#6039)
 2019-07-08 12:42:46 +02:00
Theo Arends 46210bc9f0 Add command SetOption40 0..250 
Add command SetOption40 0..250 to disable button functionality if activated for over 0.1 second. Needs SetOption1 1 and SetOption13 0 (#5449)
 2019-06-19 12:37:35 +02:00
Theo Arends 5f3be7ca87 Add define USE_DHT to my_user_config.h to save space in sonoff-basic.bin 
Add define USE_DHT to my_user_config.h to save space in sonoff-basic.bin
 2019-06-16 17:03:41 +02:00
Theo Arends 12da2fd6f9 Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin 
Add define USE_COUNTER to my_user_config.h to save space in sonoff-basic.bin and sonoff-minimal.bin
 2019-06-16 16:43:23 +02:00
Theo Arends 073fd5c2cd 6.5.0.15 Change pubsubclient MQTT_KEEPALIVE from 10 to 30 seconds 
6.5.0.15 20190606
 * Change pubsubclient MQTT_KEEPALIVE from 10 to 30 seconds in preparation of AWS IoT support
 2019-06-06 12:14:04 +02:00
Theo Arends 164b3aaf11 Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W 
Add command SetOption39 1..255 to control CSE7766 (Pow R2) or HLW8032 (Blitzwolf SHP5) handling of power loads below 6W. Default setting is 128 (#5756)
 2019-06-04 17:30:03 +02:00
Theo Arends 22663fc10c 6.5.0.13 Add command SetOption38 6..255 
6.5.0.13 20190527
 * Add command SetOption38 6..255 to set IRReceive protocol detection sensitivity mimizing UNKNOWN protocols (#5853)
 2019-05-27 11:56:14 +02:00
Theo Arends 4d070bfb15 Change default PowerDelta from 80% to 0% on new installations 
Change default PowerDelta from 80% to 0% on new installations (#5858, #5028, #4813, #4130, #4145, #3795, #3778, #3660, #3648)
 2019-05-24 15:04:48 +02:00
Stephan Hadinger ae3d7e0122 PWM using 10 bits resolution, LST_MAX created 2019-05-02 22:50:19 +02:00
Theo Arends 5e810f1ff3 Add Shelly 2.5 overtemp functionality 
* Add all temperature, humidity and pressure for global access
 * Add Shelly 2.5 overtemp functionality
 * Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592)
 2019-04-15 18:12:42 +02:00
Theo Arends 2aad0567bf Change some defines to const 
Change some defines to const
 2019-03-30 16:29:27 +01:00
Theo Arends b7f89c0a8c 6.5.0.1 Change GUI data collection 
6.5.0.1 20190319
 * Change Web GUI sensor data collection
 2019-03-19 17:31:43 +01:00
Theo Arends 37e1b31937 Add support for sensor SCD30 
* Add support for sensor SCD30 (#5434)
 * Add support for commands in sensor drivers
 2019-03-10 13:33:32 +01:00
Gabor Simon 48f6b09987 Initialisation and updating of color mapping added 2019-02-24 23:48:03 +00:00
netpok 945e7000dd Implement full color remapper 2019-02-24 21:03:33 +01:00
Gabor Simon 4492a14574 Added SetOption37 for RGB remapping 2019-02-24 12:07:15 +00:00
Gabor Simon 38b81302e3 sm16716: added config option for custom rgb order 2019-02-24 09:26:10 +04:00