9ae658f886
Update to platformio v.2.1.1
...
For some platforms esptool flash fails. https://github.com/platformio/platform-espressif8266/issues/149
Fixed in v.2.1.1
2019-05-17 16:49:02 +02:00
a777bb6cdf
6.5.0.11 Add command SetOption64 0/1 to switch between "-" or "_" as sensor index separator
...
6.5.0.11 20190517
* Add command SetOption64 0/1 to switch between "-" or "_" as sensor index separator impacting DS18X20, DHT, BMP and SHT3X sensor names (#5689 )
2019-05-17 14:23:21 +02:00
6177787744
Revert "6.5.0.11 Change sensor names using a minus"
...
This reverts commit 61c59fa4b9
2019-05-17 14:06:36 +02:00
61c59fa4b9
6.5.0.11 Change sensor names using a minus
...
6.5.0.11 20190517
* Add user define INDEX_SEPARATOR to control Sensor Name index character which was fixed to "-" (minus) but is now changed to "_" (underscore) for future support.
* This change impacts DS18X20, DHT, BMP and SHT3X sensor names.
2019-05-17 12:07:37 +02:00
f9ca25755b
Add experimental light sensor code to ADC0
...
Add experimental light sensor code to ADC0. See xsns_02_analog.ino for information.
2019-05-16 18:43:23 +02:00
e7c87d85a4
Merge pull request #5802 from Jason2866/patch-1
...
Update README.md
2019-05-16 11:01:24 +02:00
a8d21827ff
Update README.md
...
Add contributor Stephan Hadinger
2019-05-15 20:00:02 +02:00
5262cb2c1a
Merge pull request #5800 from Jason2866/patch-1
...
Official Platformio release of core 2.5.1
2019-05-15 16:35:47 +02:00
038079a865
Add rule support for single JSON value pair
...
Add rule support for single JSON value pair like {"SSerialReceived":"on"} by expanding it to {"SSerialReceived":{"Data":"on"}} allowing for trigger SSerialReceived#Data=on (#5638 )
2019-05-15 16:31:13 +02:00
32f59c462d
Official Platformio release of core 2.5.1
...
Use official resource of Platformio for core 2.5.1 and delete support for core 2.5.0.
Core 2.5.1 is a bug fix release for core 2.5.0
2019-05-15 14:49:50 +02:00
68c076147f
Merge pull request #5794 from pzgdiego/patch-1
...
fix bug with smartconfig
2019-05-15 11:31:52 +02:00
bacb438a98
Update support.ino
...
Fix I2cValidRead (#2442 )
2019-05-14 18:41:54 +02:00
e472d3232a
Add device OverTemp (>73 Celsius) detection to selected Energy Monitoring devices
...
* Fix Sonoff Pow R2 / S31 invalid energy increments (#5789 )
* Add device OverTemp (>73 Celsius) detection to any Energy Monitoring device with temperature sensor powering off all outputs
2019-05-14 17:46:40 +02:00
475a73b7ef
Merge pull request #5793 from curzon01/development
...
CSE7766 Sensor (Sonoff S31/Pow R2) prevent invalid energy load steps
2019-05-14 17:04:31 +02:00
4c4bb36495
Merge pull request #5795 from Jason2866/patch-1
...
Update Arduino 2.5.1 files
2019-05-14 17:01:47 +02:00
7f5317c1f0
Delete boards.txt
2019-05-14 16:16:17 +02:00
dc777b48e6
Delete platform.txt
2019-05-14 16:16:06 +02:00
3f99a31ff8
Add files via upload
2019-05-14 16:15:39 +02:00
8c03345ad5
Create platform.txt
2019-05-14 16:13:58 +02:00
04d48af04e
fix bug with smartconfig
...
Enables wifi STA mode in order to start SmartConfig correctly
2019-05-14 09:15:43 -04:00
9ed9ac6621
CSE7766 Sensor (Sonoff S31/Pow R2) prevent invalid energy load steps
...
prevent invalid load delta steps even checksum of datastream from CSE is valid (issue #5789 )
2019-05-14 12:13:42 +02:00
0b6c62f5f9
Add support for Shelly 1PM Template
...
Add support for Shelly 1PM Template {"NAME":"Shelly 1PM","GPIO":[56,0,0,0,82,134,0,0,0,0,0,21,0],"FLAG":2,"BASE":18} (#5716 )
2019-05-13 18:26:07 +02:00
1cdc04610e
Update xsns_02_analog.ino
...
Fix KNX compilation
2019-05-13 16:36:17 +02:00
ad54ece2fb
6.5.0.10 Enable ADC0 by default
...
6.5.0.10 20190513
* Enable ADC0 by default in my_user_config.h (#5671 )
* Add user configurable ADC0 to Module and Template configuration compatible with current FLAG options (#5671 )
2019-05-13 15:56:01 +02:00
f9f3e29eab
Merge pull request #5792 from s-hadinger/fix/lightsetdimmer
...
Put back LightSetDimmer, see #5787
2019-05-13 10:34:25 +01:00
fb77763c45
Merge pull request #5784 from Jason2866/patch-1
...
Add Bugfix Arduino Core 2.5.1 and use as default
2019-05-13 10:33:52 +01:00
63f5429d28
Merge pull request #5770 from andreapede/patch-1
...
Missing the end pointer reference solves #5760
2019-05-13 10:33:16 +01:00
e81c2908f2
Merge pull request #5783 from curzon01/development
...
decode-config.py: adapt settings
2019-05-13 10:32:27 +01:00
cfdc553b65
Put back LightSetDimmer, see #5787
2019-05-13 11:27:46 +02:00
faa2590e92
Fix
2019-05-11 14:32:35 +02:00
3d08514060
add -DBEARSSL_SSL_BASIC
...
When using TLS, this flag avoids loading all the Elliptic Curves algorithm, and saves ~45KB of flash. Anyways, Elliptic Curves are far too slow for ESP8266 and the handshake would take more the 5 seconds. With this flag we limit to RSA algorithms which are faster.
Thx for the tipp @s-hadinger
2019-05-11 14:19:54 +02:00
bc211e8c78
Add Bugfix Arduino Core 2.5.1 and use as default
...
Since bugfix release is still not availible via orig. Platformio Github it is donwloaded via forked source from https://github.com/Jason2866/platform-espressif8266.git#Tasmota
2019-05-11 13:58:23 +02:00
9a6cdbe1c1
decode-config.py: adapt settings
...
- fix suppress of empty values for output format "Tasmota cmnd"
- add SetOption63 (no_power_feedback)
- add config file verbose info
- change `@f`/`@h` macro char replacement (alphanumeric chars only, same as Tasmota does)
- remove mcp230xx pinmode validation
- revert PowerSet, VoltageSet, CurrentSet for >= v6.2.1.6 from -T cmnd
- allow mix case for -g parameter
- adjust command groups -g to Tasmota Wiki
2019-05-11 13:46:58 +02:00
09c1b4f5f9
Update _changelog.ino
2019-05-09 12:14:18 +02:00
5b5272e684
Missing the end pointer reference solves #5760
...
Exiting from the unescape call the content in buffer still contains the original string. The result of unescape elaboration works well, but the rest of the string is still there and in the printf in the main program infact is printed overlapped to the previous content.
TY MauroS for the hint.
2019-05-09 11:26:20 +02:00
889b01779d
Merge pull request #5766 from s-hadinger/development
...
Fixed: Coldwhite/Warmwhite channels were inverted, back to RGBCW
2019-05-08 11:48:16 +01:00
9247107f3d
Fixed: WC/WW were inverted, back to RGBCW
2019-05-08 12:07:15 +02:00
678f3ec35b
Fixed: WC/WW were inverted, back to RGBCW
2019-05-08 12:06:22 +02:00
0576d712cd
Merge pull request #5759 from arendst/blakadder-patch-1
...
Update SUPPORT.md
2019-05-07 17:01:33 +01:00
f09c5c495f
Merge pull request #5758 from s-hadinger/fix/emulation_size
...
Updated code size for USE_EMULATION
2019-05-07 17:00:37 +01:00
c71ba03acc
Update SUPPORT.md
...
since the FAQ is cleaned and troubleshooting is more of a general guide i added the FAQ link
2019-05-07 15:00:21 +02:00
4cf156cbdc
Updated code size for USE_EMULATION
2019-05-07 09:37:10 +02:00
fa64a0bf4d
Merge pull request #5748 from s-hadinger/fix/better_colormode
...
Allow all 5 PWM channels individually adressable with LEDs.
2019-05-05 19:43:57 +01:00
9478c34ca0
Updated changelog
2019-05-05 18:28:29 +02:00
e23f933cde
Moved Philips-Xiaomi special handling to a better location
2019-05-05 18:18:20 +02:00
8144402536
Merge branch 'development' of https://github.com/arendst/Sonoff-Tasmota into fix/better_colormode
2019-05-05 09:19:34 +02:00
3cff56cdae
Improved doc of LightStateClass about invariants
2019-05-05 09:18:57 +02:00
dcd10a04cd
Better color-mode management for RGB and Warm/Cold LEDs
2019-05-04 23:04:53 +02:00
472ac7cc2a
Merge pull request #5742 from s-hadinger/feature/led_gamma_10_bits
...
Extend PWM resolution from 8 to 10 bits for low brightness lights.
2019-05-04 18:42:47 +01:00
4b3c826a0e
Merge branch 'development' of https://github.com/arendst/Sonoff-Tasmota into feature/led_gamma_10_bits
2019-05-04 17:37:05 +02:00
Jason2866
Theo Arends
Diego Pérez
Norbert Richter
Stephan Hadinger
Andrea Pede
blakadder