Commit Graph

54 Commits

Author SHA1 Message Date
Theo Arends 7965ada5c5 Clean code
Clean code
2019-08-18 15:21:38 +02:00
Theo Arends 54364484fa Add Driver and Sensor info to status 4
* Add Driver and Sensor info to status 4
* Change WebSensor return information to show disabled state using exclamation mark
* Clean up debug code
2019-08-18 13:23:43 +02:00
Theo Arends 676c7867ca Refactor Sensors available
Refactor Sensors available
2019-08-16 18:30:45 +02:00
Theo Arends 26d331501b Add embedded sensor numbering to Status 4
Add embedded sensor numbering to Status 4
2019-08-16 17:48:05 +02:00
Theo Arends c61f2cc5ec Refactor WebSensor
Refactor WebSensor
2019-08-16 16:54:36 +02:00
Theo Arends 9746489380 Bump version to 6.6.0.5
* Add command WebSensor<sensor number> 0/1 to control display of sensor data in web GUI (#6085)
 * Change some table locations from RAM to Flash
2019-08-16 16:12:33 +02:00
Theo Arends 23ec00a452 Add command Buzzer
Add command Buzzer with optional parameters <number of beeps>,<duration of beep in 100mS steps>,<duration of silence in 100mS steps> enabled when a buzzer is configured (#5988)
2019-08-12 17:18:08 +02:00
Theo Arends 2f6b88cb4d Extent sensor list
Extent sensor list
2019-08-07 12:18:59 +02:00
Theo Arends 1b69502d9b Code optimization - Change for(uint8_t in for (uint32_t
Code optimization - Change for(uint8_t in for (uint32_t
2019-06-30 16:44:36 +02:00
Theo Arends 30adce5648 Revert "Code optimization - Change for(uint8_t in for (uint32_t"
This reverts commit 5e1eac3f74.
2019-06-30 15:56:55 +02:00
Theo Arends 5e1eac3f74 Code optimization - Change for(uint8_t in for (uint32_t
Code optimization - Change for(uint8_t in for (uint32_t
2019-06-30 15:47:32 +02:00
Theo Arends 37e1b31937 Add support for sensor SCD30
* Add support for sensor SCD30 (#5434)
 * Add support for commands in sensor drivers
2019-03-10 13:33:32 +01:00
Theo Arends 06a9fbd792 Changed logging message handling
Changed logging message handling
2019-03-08 15:15:42 +01:00
Theo Arends 304ac6fe44 6.4.1.12 code changes (byte/boolean)
6.4.1.12 20190128
 * Change code use of boolean to bool and byte to uint8_t
 * Change code uint8_t flags to bool flags
2019-01-28 14:08:33 +01:00
Theo Arends 447ec6256e 6.4.1.4 Update Copyright (C) 2019
6.4.1.4 20190101
 * Update Copyright (C) 2019
2019-01-01 13:55:01 +01:00
Theo Arends 850d240d2e Add test for result usage 2018-12-30 14:56:50 +01:00
Theo Arends 0a22261e36 Revert "Disable unused feature"
This reverts commit 8fe61f6a11.
2018-12-30 14:47:17 +01:00
Theo Arends 8fe61f6a11 Disable unused feature 2018-12-30 14:40:06 +01:00
Theo Arends 164db4e12b Clean up
Clean up
2018-11-24 17:22:06 +01:00
Theo Arends d71ae77900 6.3.0.12 Change boot delays
6.3.0.12 20181122
 * Remove delays introduced in 6.3.0.11 (#4233)
 * Add additional start-up delay during initial wifi connection
 * Add support for I2C MGC3130 Electric Field Effect sensor by Christian Baars (#3774, #4404)
 * Add initial support for Hass sensor discovery (#4380)
2018-11-22 12:25:18 +01:00
Theo Arends 29f46c5804
Merge pull request #4380 from emontnemery/hass_announce_dht_sensor
Add support for sensor discovery
2018-11-22 12:16:41 +01:00
Erik bee50cba06 Add support for sensor discovery 2018-11-21 19:21:51 +01:00
Theo Arends 76829d4ced 6.3.0.11 Add delays
6.3.0.11 20181120
 * Add delays removed in 6.3.0.9 (#4233)
 * Allow user definition of defines WIFI_RSSI_THRESHOLD (default 10) and WIFI_RESCAN_MINUTES (default 44)
 * Add support for Fujitsu HVac and IrRemote (#4387)
2018-11-20 14:10:32 +01:00
Theo Arends 18997e841f 6.3.0.9 Add dynamic delay in loop
6.3.0.9 20181118
 * Moved command SetSensorXX to debugging driver freeing user code space
 * Add dynamic delay to main loop providing time for wifi background tasks
 * Remove delays introduced in 6.3.0.1 (#4233)
2018-11-18 15:02:52 +01:00
andrethomas 4a7e7b0dbb Change C functions with () to (void) 2018-11-14 15:32:09 +02:00
Theo Arends 3ef78e8095 Revert "Moved command SetSensorXX"
This reverts commit 830319bc6e.
2018-11-12 15:54:18 +01:00
Theo Arends 830319bc6e Moved command SetSensorXX
Moved command SetSensorXX to debugging
2018-11-12 15:09:09 +01:00
Theo Arends c0cfdde8ac Fix Sonoff Pow R2 and Sonoff S31
Fix Sonoff Pow R2 and Sonoff S31 Serial interface hang caused by Sonoff Basic R2 driver delay implementation (and possibly core bug)
2018-11-11 17:58:18 +01:00
Theo Arends 44d6714b69 Moved all func ptr tables to RAM
Moved all function pointer tables to RAM to check performance issues
2018-11-07 11:57:28 +01:00
Theo Arends a4df728115 Moved func ptr tables to RAM
Moved function pointer tables to RAM to check performance issues
2018-11-07 11:38:24 +01:00
Theo Arends 9fef82736d Prep drivers for management
Prep drivers for management
2018-11-07 10:30:03 +01:00
Theo Arends 15148f290d 6.3.0.4 Add SetSensorXX
6.3.0.4 20181106
 * Add command SetSensorXX 0/1 to disable/re-enable compiled xsns_XX_sensor.ino driver
2018-11-06 17:33:51 +01:00
andrethomas 1000cb836f Make driver boot delay configurable 2018-11-01 17:24:49 +02:00
Theo Arends 46a0a0afba Add minutes to commands Timezone
Add minutes to commands Timezone to allow all possible world timezones
2018-11-01 13:00:05 +01:00
Adrian Scillato 1fc19ccf5f
Reduce CPU usage at boot time 2018-10-31 15:07:27 -03:00
Theo Arends 19b7a33f6b Prepair for more drivers 2018-10-23 16:03:57 +02:00
Theo Arends bbd2529914 Sleep fixes part 2 and 3 of 3
* Change scheduler phase 2/3 - Fixed when sleep is enabled: Blinktime (#3581)
 * Change scheduler phase 3/3 - Some sensor update timings: AdcEvery 200 -> 250, Senseair 300 -> 250, SDM120 300 -> 250, SDM630 300 -> 250
2018-08-26 17:10:18 +02:00
Theo Arends a489b4a44a Add profile info to drivers
Update release notes and add profile info to some drivers
2018-07-12 12:19:08 +02:00
Theo Arends 50ce01cd0b Update sensor drivers
Update sensor drivers to provide instant results
2018-07-11 14:21:11 +02:00
Theo Arends 2049730877 Fix DS18x20 temperature updates (#
5.12.0k
 * Change Timer parameter name from Power to Action
 * Fix
update temperature on DS18x20 drivers (#2328)
2018-04-12 14:01:43 +02:00
Theo Arends c60c8af237 v5.12.0d - Add alternative MQTT libraries
5.12.0d
* Add support for optional MQTT drivers to be selected in user_config.h
(#1992)
2018-03-02 15:38:37 +01:00
arendst 0908c336ee v5.11.1j - Provide user driver/sensor hooks 91-99
Provide user driver/sensor hooks 91-99 (#1828)
2018-02-08 15:20:03 +01:00
arendst d66ef2347e v5.11.1f - Revert chunks (#1706)
5.11.1f
 * Revert chunked webserver pages as it fails on many browsers
due to chunks being too small (#1706)
 * Reduce initial console weblog
from 20 to 13 lines due to memory constraints
2018-01-26 15:21:57 +01:00
arendst bb6418116f Fix compile error due to missing define #1692 2018-01-25 10:56:20 +01:00
arendst 2cac51619c v5.11.1e Fixes new commands
5.11.1e
 * Replaced command Ina219Mode with command Sensor13
 * Add
command Sensor15 2 to start MHZ19(B) Zero Point Calibration
 * Add
chunked webserver pages for large pages saving memory
 * Fix Non-English
JSON temperature unit attachement
 * Fix Sonoff Pow Energy Today and
Energy Total reading after restart (#1648)
 * Rewrite function pointers
to save code space and memory (#1683)
 * Add option define
HOME_ASSISTANT_DISCOVERY_ENABLE in user_config.h (#1685)
 * Fix SOnoff
Pow Energy Period roll-over (#1688)
2018-01-24 17:31:20 +01:00
arendst c14234394a v5.11.1d - Add command State and fixes
5.11.1d
 * Add locale Decimal Separator to Web sensor page
 * Add
command State to retrieve device state information (same data as
teleperiod state and status 11 in slightly different JSON format)
 *
Extent state information with Light parameters
 * Fix IRSend parameter
translation (#1636)
 * Add optional login to Webserver AP mode (#1587,
#1635)
 * Fix BME680 teleperiod resistance measuring (#1647)
2018-01-20 12:12:39 +01:00
arendst 349230de72 v5.10.0i - Fixes and rearrangements
5.10.0i
 * Add device function pointers
 * Moved Command and JSON
English language defines to one file (i18n.h)
 * Update it-IT.h language
file (#1449)
 * Fix Wemo and Hue emulation by adding M-Search response
delay (#1486)
2018-01-05 12:26:19 +01:00
arendst 67d8fa0d64 v5.10.0c
5.10.0c
 * Consolidate device serial (MH-Z19, SenseAir and Pzem004T)
into TasmotaSerial library
 * Consolidate PWM device recognition
 * Fix
Wemo Emulation (#1357)
 * Add support for Arilux LC06 (#1414)
2017-12-25 17:41:12 +01:00
arendst 7723d52453 Add support for SenseAir S8 CO2 sensor
* Add support for SenseAir S8 CO2 sensor to be enabled with define
USE_SENSEAIR in user_config.h
 * Add support for Domoticz Air Quality
sensor to be used by MH-Z19(B) and SenseAir sensors
2017-12-22 14:55:24 +01:00
arendst 0129fc9825 Change some output to JSON Array (#1363)
* Change output to valid JSON Array if needed (#1363)
2017-12-18 18:20:28 +01:00