Commit Graph

942 Commits

Author SHA1 Message Date
Theo Arends 0ea36d996c Change Dht driver from v6 to v7
- Change Dht driver from v6 to v7
- Add command ``DhtDelay<sensor> <high_delay>,<low_delay>`` to allow user control over high and low delay in microseconds (#17944)
2023-02-15 15:21:57 +01:00
Theo Arends 87686c0d52 update changelogs 2023-02-13 16:07:38 +01:00
Theo Arends 055331d2ab Breaking change TM1638 button and led support
Breaking change TM1638 button and led support are handled as virtual switches and relays (#11031)
2023-02-06 15:57:27 +01:00
Theo Arends 8bc03bbc06 Bump version v12.3.1.6
- Add ESP32 preliminary support for Matter protocol, milestone 1 (commissioning) by Stephan Hadinger
- Add basic support for Shelly Pro 4PM
2023-02-05 14:29:42 +01:00
Fabrizio Amodio e8056df1ad
Biopdu-v1.1.1 (#17868)
* Template Fix

* Removed common setting, use SetOption150 instead

* code cleaning

* BioPDU Factory Settings

* CHANGELOG update

* RELEASENOTES update
2023-02-03 17:52:26 +01:00
Theo Arends db3fdc5118 Add ESP32 support for eigth energy phases/channels
- ESP32 support for eigth energy phases/channels
- ESP32 command ``EnergyCols 1..8`` to change number of GUI columns
- ESP32 command ``EnergyDisplay 1..3`` to change GUI column presentation
- support for SEN5X gas and air quality sensor by Tyeth Gundry (#17736)
2023-01-29 16:09:13 +01:00
Theo Arends f064250d9a Update change logs
Version bump to v12.3.1.5
2023-01-27 16:59:54 +01:00
Theo Arends 5d98b8e05a Update RELEASENOTES.md 2023-01-24 10:27:47 +01:00
Theo Arends f0bd418129 Dark logo 2023-01-24 10:19:46 +01:00
Theo Arends 82b6d1ee91 Bump version to v12.3.1.4 2023-01-15 17:45:59 +01:00
Theo Arends f1763d34cf Update changelogs 2023-01-11 10:31:39 +01:00
Theo Arends 9073fe01c1 Add ESP32 support for BMPxxx sensors on two I2C busses
Add ESP32 support for BMPxxx sensors on two I2C busses (#17643)
2023-01-08 17:19:08 +01:00
Theo Arends 2e7496a052 Keep webserver enabled on command ``upload`` 2023-01-07 15:37:52 +01:00
Theo Arends 8275cb776e Fix rule mqtt subscribe payload size
Increase rule event buffer from 100 to 256 characters (#16943)
2023-01-05 15:02:55 +01:00
Theo Arends ea6a5a2d4e Removed delays in TasmotaSerial and TasmotaModbus Tx enable switching 2023-01-02 15:08:40 +01:00
Theo Arends e375448090 Update change logs 2023-01-02 12:31:46 +01:00
Theo Arends 14ee8decf7 Update changelogs
Add support for PCA9632 4-channel 8-bit PWM driver as light driver by Pascal Heinrich (#17557)
2023-01-01 14:29:41 +01:00
Theo Arends c63919d783 Change Energy totals max supported value
- Change Energy totals max supported value from +/-21474.83647 to +/-2147483.647 kWh
- Bump version to v12.3.1.3
2023-01-01 11:32:30 +01:00
Theo Arends 20a50ffc2e Revert Tuya rewrite
- Update changelogs
2022-12-31 16:08:59 +01:00
Theo Arends 4ee6aee35e Fix ESP8266 relay power on spikes
Fix ESP8266 set GPIO's to input on power on fixing relay spikes (#17531)
2022-12-29 14:46:34 +01:00
Theo Arends 2e1f8fd756 Update changelogs
Change ESP32 Framework (Core) from v2.0.5.4 to v2.0.6 (IPv6 support)
2022-12-28 14:31:49 +01:00
Theo Arends 2fd63ff01f Fix Modbus transmit enable GPIO
Fix Modbus transmit enable GPIO enabled once during write buffer
2022-12-28 14:07:30 +01:00
Theo Arends 234d6e20e0 Extent Generic Energy Modbus Driver
- Add support for up to 3 single phase modbus energy monitoring device using generic Energy Modbus driver
2022-12-23 16:56:18 +01:00
Theo Arends 23e0bc27e7 Update changelogs 2022-12-22 17:54:54 +01:00
Theo Arends 8ffff8b857 Change Tasmota OTA scripts
Change Tasmota OTA scripts now support both unzipped and gzipped file uploads (#17378)
2022-12-21 17:22:54 +01:00
Theo Arends 3555d88bee Bump version v12.3.1.2
- Fix shutter default motorstop set to 0 (#17403)
2022-12-21 15:20:33 +01:00
Theo Arends b33d2d540f Update changelogs 2022-12-18 14:18:14 +01:00
Theo Arends a6602249a3 Update changelogs 2022-12-18 14:05:31 +01:00
Theo Arends 4e5c1f7a2d Bump version to v12.3.1.1 2022-12-16 10:20:51 +01:00
Theo Arends 571502114c Bump version v12.3.0.1 2022-12-14 14:46:08 +01:00
Theo Arends 1ad8b7713e Add support for ME007-ULS
Add support for ME007-ULS narrow FoV ultrasonic distance sensor by Mathias Buder (#17376)
2022-12-14 12:18:49 +01:00
Theo Arends f6d385250e Update changelogs 2022-12-14 11:31:25 +01:00
Theo Arends ce4197459f Update changelogs 2022-12-14 11:25:12 +01:00
Theo Arends 630987302a Fix Analog MQ exception
Fix Analog MQ exception (#17271)
2022-12-12 10:57:21 +01:00
Theo Arends d8d45078fb Update changelogs 2022-12-11 12:23:01 +01:00
Theo Arends e018b61a9d Update changelogs 2022-12-10 17:16:42 +01:00
Theo Arends e1221b924d Changed removed leading spaces on commands ``(S)SerialSend1 to 6``
Removed leading spaces on commands ``(S)SerialSend1 to 6`` but keep on duplicate commands ``(S)SerialSend11 to 16`` (#16723)
2022-12-04 15:09:39 +01:00
Theo Arends bbde894628 Add serial Modbus transmit enable GPIOs
Add serial Modbus transmit enable GPIOs to all modbus energy drivers and modbus bridge (#17247)
2022-12-03 12:33:42 +01:00
Theo Arends af9f83e7e4 Bump version v12.2.0.6 2022-11-29 11:11:39 +01:00
Theo Arends 53563d44d8 Add support for HLK-LD2410 24GHz smart wave motion sensor
Add support for HLK-LD2410 24GHz smart wave motion sensor
2022-11-26 17:49:25 +01:00
Theo Arends a381da3a39 Revert GUI file accept 2022-11-24 14:47:26 +01:00
Theo Arends 6e9394984d Update changelogs 2022-11-20 15:52:40 +01:00
Theo Arends f9138984bf Add accept filename extensions to GUI
Add accept filename extensions to GUI file upload input fields (#16875)
2022-11-20 15:07:38 +01:00
Theo Arends 4f31e7a1b2 Add command ``SetOption35 0..255``
Add command ``SetOption35 0..255`` to skip number of received messages in Serial Bridge (default 0) (#17140)
2022-11-20 12:52:24 +01:00
Theo Arends 783631903d Add user control over Serial Bridge buffers
- Add optional define ``SERIAL_BRIDGE_BUFFER_SIZE`` to set Serial Bridge internal buffer size (Default ESP8266 = 256, ESP32 = 800)
- Add command ``SSerialBuffer 256..SERIAL_BRIDGE_BUFFER_SIZE`` to change serial bridge rx buffer size (#17120)
2022-11-18 16:21:54 +01:00
Theo Arends 0674f9b0b6 Add command ``SSerialBuffer 64..256``
Add command ``SSerialBuffer 64..256`` to change software serial bridge receive buffer size from default (64) to max local buffer size (256) (#17120)
2022-11-18 13:00:59 +01:00
Theo Arends e578171a16 Update changelogs 2022-11-17 12:47:09 +01:00
Theo Arends a924e41ff3 Bump version v12.2.0.5
- Fixed ModbusBridge baudrates over 76500 baud (#17106)
- Bump version v12.2.0.5
2022-11-17 11:44:51 +01:00
Theo Arends 99378308f7 Update changelogs 2022-11-16 14:26:49 +01:00
Theo Arends 229c2cce06 Revert Art-Net to ArtNet 2022-11-16 10:55:56 +01:00
Theo Arends 5f3d504c30 Add support for HMC5883L
Add support for HMC5883L 3-Axis Digital Compass sensor by Andreas Achtzehn (#17069)
2022-11-15 11:11:32 +01:00
Theo Arends e88d1682e9 Add command ``SwitchMode 16``
Add command ``SwitchMode 16`` sending only MQTT message on inverted switch change (#17028)
2022-11-15 10:10:29 +01:00
Theo Arends c92d51f050 Rename ArtNet to Art-Net 2022-11-14 14:20:41 +01:00
Theo Arends bfbdd49aaf Revert change 2.7.4.9 2022-11-14 12:52:25 +01:00
Theo Arends 60ff102807 Update changelogs 2022-11-14 12:04:36 +01:00
Theo Arends 13c27194ec TuyaMcu rewrite by btsimonh (#17051) 2022-11-13 12:55:18 +01:00
Theo Arends e83882b655 Update changelogs 2022-11-10 13:54:05 +01:00
Jason2866 1146955312
Core 2.0.5.3 2022-11-10 12:52:38 +01:00
Theo Arends dd1586fbfc Bump version to v12.2.0.4
- Reverted Flash Mode back from ``DIO`` to ``DOUT`` for ESP8266/ESP8285 (#17019)
2022-11-09 12:19:33 +01:00
Theo Arends 381bfbf5bd Redesign distance sensors VL53LXX, TOF10120, HRXL and DYP
Redesign distance sensors VL53LXX, TOF10120, HRXL and DYP to use cm instead of mm (#17021)
2022-11-08 16:59:46 +01:00
Theo Arends 05b43fb143 Redesign distance sensors HRXL and DYP
Redesign distance sensors HRXL and DYP to use cm instead of mm (#17021)
2022-11-08 15:27:40 +01:00
Theo Arends a469b35f02 Bump version to v12.2.0.3 2022-11-07 11:06:17 +01:00
Theo Arends 4e9cfc7629 Add command ``SetOption47 1..255``
Add command ``SetOption47 1..255`` to delay power on relay state in seconds reducing power surge
2022-11-03 17:26:54 +01:00
Theo Arends 0632377192 Fix serial initialization
Fix serial initialization for baudrate and config (#16970)
2022-11-02 11:24:24 +01:00
Theo Arends 79536d8714 Update changelog 2022-10-31 10:59:49 +01:00
Theo Arends 7167eb2f46 Changed ADE7953 monitoring
Changed ADE7953 monitoring from instant power to accumulated energy (#16941)
2022-10-30 12:20:56 +01:00
Theo Arends 41b65fd6b7 Add support for two phase power calibration
Add support for two phase power calibration using commands ``PowerSet2``, ``VoltageSet2`` and ``CurrentSet2``
2022-10-30 11:15:17 +01:00
Theo Arends 7fac661b2e Update changelogs 2022-10-29 16:00:47 +02:00
Theo Arends cef18060a0 Bump version to v12.2.0.2
Prepare for extended calibration and move some persistent data (PowerLow)
2022-10-26 17:59:43 +02:00
Theo Arends c5f7195d77 Add support for Shelly Pro 1/1PM and 2/2PM (#16773) 2022-10-26 17:16:36 +02:00
Theo Arends b4269d262c Add support for Shelly Pro 1/2
Add support for Shelly Pro 1/2 (#16773)
2022-10-24 11:32:10 +02:00
Theo Arends 753f4bee31 Change compiling with reduced boards manifests
Change compiling with reduced boards manifests in favour of Autoconfig (#16848)
2022-10-19 10:21:31 +02:00
Theo Arends 2104256b74 Add DS18x20 support on up to four GPIOs
Add DS18x20 support on up to four GPIOs by md5sum-as (#16833)
2022-10-18 16:36:45 +02:00
Theo Arends 7b6f724685 Update changelogs 2022-10-18 15:34:07 +02:00
Theo Arends 065396ff73 Bump version v12.2.0.1 2022-10-17 11:25:22 +02:00
Theo Arends d4559fea5a Prep release v12.2 2022-10-17 10:34:48 +02:00
Theo Arends 480fae6804 Add command ``SspmPowerOnState<relay> 0|1|2``
Add command ``SspmPowerOnState<relay> 0|1|2`` to set Sonoff SPM 4Relay module v1.2.0 power on state overruling tasmota  global power on state. 0 = Off, 1 = On, 2 = Saved state (#13447)
2022-10-16 12:57:17 +02:00
Theo Arends 2ad018816b Add command ``WcClock 10..200``
Add command ``WcClock 10..200`` set webcam clock in MHz. Default is 20
2022-10-13 17:58:16 +02:00
Theo Arends 6202211c31 Fix Shelly EM polarity (#16486) 2022-10-12 15:46:33 +02:00
Theo Arends 5cfbbd4302 Add command ``Sunrise 0..3`` to select sunrise dawn angle
- Bump version to v12.1.1.5
- Add command ``Sunrise 0..3`` to select sunrise dawn angle between Normal, Civil, Nautical or Astronomical (#16795)
2022-10-12 11:02:54 +02:00
Theo Arends 3427e1bee3 Support for Modbus Energy Monitoring devices
Support for Modbus Energy Monitoring devices using a rule file. See ``xnrg_29_modbus.ino`` for more information
2022-10-08 16:14:11 +02:00
Theo Arends da623701d7 Add support for QMC5883L magnetic induction sensor
Add support for QMC5883L magnetic induction sensor by Helge Scheunemann (#16714)
2022-10-05 15:00:03 +02:00
Theo Arends 8eb7b007d5 Support for Shelly Plus 2PM
- Version bump to v12.1.1.4
- Support for Shelly Plus 2PM using template ``{"NAME":"Shelly Plus 2PM PCB v0.1.9","GPIO":[320,0,0,0,32,192,0,0,225,224,0,0,0,0,193,0,0,0,0,0,0,608,640,3457,0,0,0,0,0,9472,0,4736,0,0,0,0],"FLAG":0,"BASE":1,"CMND":"AdcParam1 2,10000,10000,3350"}``
2022-10-03 18:02:50 +02:00
Theo Arends f668ea44ed Add ESP32-S2 and ESP32-S3 touch input support 2022-09-27 15:36:35 +02:00
Theo Arends 3a4a82ba0a Fix ESP32 touch button multi-press and hold detection
Fix ESP32 touch button multi-press and hold detection (#16596)
2022-09-27 14:31:21 +02:00
Theo Arends 6bfb9d6aa4 Update changelogs 2022-09-24 16:53:11 +02:00
Theo Arends 971b06ccdd Add command ``SetOption46 0..255``
Add command ``SetOption46 0..255`` to add 0..255 * 10 milliseconds power on delay before initializing I/O (#15438)
2022-09-15 17:17:16 +02:00
Theo Arends 6aece15bd6 ESP32 Increase number of button GPIOs from 8 to 28
ESP32 Increase number of button GPIOs from 8 to 28 (#16518)
2022-09-14 16:33:01 +02:00
Theo Arends 8b5a34b014 Add support of optional file calib.dat
Add support of optional file calib.dat on ADE7953 based energy monitors like Shelly EM (#16486)
2022-09-13 15:35:09 +02:00
Theo Arends ae1d4ef1f7 Bump version to v12.1.1.2 2022-09-10 16:32:57 +02:00
Theo Arends 04160106c2 Add commands DspLine and DspSpeed
Add commands DspLine and DspSpeed (#15856)
2022-09-08 16:02:49 +02:00
Theo Arends 86e45969bd Support for DFRobot SEN0390 V30B ambient light sensor
Add support for DFRobot SEN0390 V30B ambient light sensor (#16105)
2022-09-02 13:13:47 +02:00
Theo Arends 684584a5e5 Command ``SetOption146 1`` to enable display of ESP32 internal temperature 2022-09-02 11:24:47 +02:00
Theo Arends 14642fb214 Update changelogs 2022-09-01 09:43:20 +02:00
Theo Arends 71c3b98b35 Add download link for v5.14.0 2022-08-31 15:51:21 +02:00
Theo Arends 0e59ddc467 Update changelogs 2022-08-31 11:08:45 +02:00
Theo Arends 4cafaf269c Update changelogs 2022-08-28 15:05:46 +02:00
Theo Arends 7e34936e6b Update changelogs 2022-08-27 11:36:12 +02:00
Theo Arends c0cb49d2c8 TasmotaModbus library from v3.5.0 to v3.6.0
TasmotaModbus library from v3.5.0 to v3.6.0 (#16351)
2022-08-27 11:31:29 +02:00
Theo Arends f3e677e805 Button debouncing V3 by adopting switch debounce code (#16339)
Button debouncing V3 by adopting switch debounce code (#15867)
2022-08-25 17:23:51 +02:00