Theo Arends
5f3d504c30
Add support for HMC5883L
...
Add support for HMC5883L 3-Axis Digital Compass sensor by Andreas Achtzehn (#17069 )
2022-11-15 11:11:32 +01:00
Theo Arends
e88d1682e9
Add command ``SwitchMode 16``
...
Add command ``SwitchMode 16`` sending only MQTT message on inverted switch change (#17028 )
2022-11-15 10:10:29 +01:00
Theo Arends
c92d51f050
Rename ArtNet to Art-Net
2022-11-14 14:20:41 +01:00
Theo Arends
bfbdd49aaf
Revert change 2.7.4.9
2022-11-14 12:52:25 +01:00
Theo Arends
60ff102807
Update changelogs
2022-11-14 12:04:36 +01:00
Theo Arends
13c27194ec
TuyaMcu rewrite by btsimonh ( #17051 )
2022-11-13 12:55:18 +01:00
Theo Arends
e83882b655
Update changelogs
2022-11-10 13:54:05 +01:00
Jason2866
1146955312
Core 2.0.5.3
2022-11-10 12:52:38 +01:00
Theo Arends
dd1586fbfc
Bump version to v12.2.0.4
...
- Reverted Flash Mode back from ``DIO`` to ``DOUT`` for ESP8266/ESP8285 (#17019 )
2022-11-09 12:19:33 +01:00
Theo Arends
381bfbf5bd
Redesign distance sensors VL53LXX, TOF10120, HRXL and DYP
...
Redesign distance sensors VL53LXX, TOF10120, HRXL and DYP to use cm instead of mm (#17021 )
2022-11-08 16:59:46 +01:00
Theo Arends
05b43fb143
Redesign distance sensors HRXL and DYP
...
Redesign distance sensors HRXL and DYP to use cm instead of mm (#17021 )
2022-11-08 15:27:40 +01:00
Theo Arends
a469b35f02
Bump version to v12.2.0.3
2022-11-07 11:06:17 +01:00
Theo Arends
4e9cfc7629
Add command ``SetOption47 1..255``
...
Add command ``SetOption47 1..255`` to delay power on relay state in seconds reducing power surge
2022-11-03 17:26:54 +01:00
Theo Arends
0632377192
Fix serial initialization
...
Fix serial initialization for baudrate and config (#16970 )
2022-11-02 11:24:24 +01:00
Theo Arends
79536d8714
Update changelog
2022-10-31 10:59:49 +01:00
Theo Arends
7167eb2f46
Changed ADE7953 monitoring
...
Changed ADE7953 monitoring from instant power to accumulated energy (#16941 )
2022-10-30 12:20:56 +01:00
Theo Arends
41b65fd6b7
Add support for two phase power calibration
...
Add support for two phase power calibration using commands ``PowerSet2``, ``VoltageSet2`` and ``CurrentSet2``
2022-10-30 11:15:17 +01:00
Theo Arends
7fac661b2e
Update changelogs
2022-10-29 16:00:47 +02:00
Theo Arends
cef18060a0
Bump version to v12.2.0.2
...
Prepare for extended calibration and move some persistent data (PowerLow)
2022-10-26 17:59:43 +02:00
Theo Arends
c5f7195d77
Add support for Shelly Pro 1/1PM and 2/2PM ( #16773 )
2022-10-26 17:16:36 +02:00
Theo Arends
b4269d262c
Add support for Shelly Pro 1/2
...
Add support for Shelly Pro 1/2 (#16773 )
2022-10-24 11:32:10 +02:00
Theo Arends
753f4bee31
Change compiling with reduced boards manifests
...
Change compiling with reduced boards manifests in favour of Autoconfig (#16848 )
2022-10-19 10:21:31 +02:00
Theo Arends
2104256b74
Add DS18x20 support on up to four GPIOs
...
Add DS18x20 support on up to four GPIOs by md5sum-as (#16833 )
2022-10-18 16:36:45 +02:00
Theo Arends
7b6f724685
Update changelogs
2022-10-18 15:34:07 +02:00
Theo Arends
065396ff73
Bump version v12.2.0.1
2022-10-17 11:25:22 +02:00
Theo Arends
d4559fea5a
Prep release v12.2
2022-10-17 10:34:48 +02:00
Theo Arends
480fae6804
Add command ``SspmPowerOnState<relay> 0|1|2``
...
Add command ``SspmPowerOnState<relay> 0|1|2`` to set Sonoff SPM 4Relay module v1.2.0 power on state overruling tasmota global power on state. 0 = Off, 1 = On, 2 = Saved state (#13447 )
2022-10-16 12:57:17 +02:00
Theo Arends
2ad018816b
Add command ``WcClock 10..200``
...
Add command ``WcClock 10..200`` set webcam clock in MHz. Default is 20
2022-10-13 17:58:16 +02:00
Theo Arends
6202211c31
Fix Shelly EM polarity ( #16486 )
2022-10-12 15:46:33 +02:00
Theo Arends
5cfbbd4302
Add command ``Sunrise 0..3`` to select sunrise dawn angle
...
- Bump version to v12.1.1.5
- Add command ``Sunrise 0..3`` to select sunrise dawn angle between Normal, Civil, Nautical or Astronomical (#16795 )
2022-10-12 11:02:54 +02:00
Theo Arends
3427e1bee3
Support for Modbus Energy Monitoring devices
...
Support for Modbus Energy Monitoring devices using a rule file. See ``xnrg_29_modbus.ino`` for more information
2022-10-08 16:14:11 +02:00
Theo Arends
da623701d7
Add support for QMC5883L magnetic induction sensor
...
Add support for QMC5883L magnetic induction sensor by Helge Scheunemann (#16714 )
2022-10-05 15:00:03 +02:00
Theo Arends
8eb7b007d5
Support for Shelly Plus 2PM
...
- Version bump to v12.1.1.4
- Support for Shelly Plus 2PM using template ``{"NAME":"Shelly Plus 2PM PCB v0.1.9","GPIO":[320,0,0,0,32,192,0,0,225,224,0,0,0,0,193,0,0,0,0,0,0,608,640,3457,0,0,0,0,0,9472,0,4736,0,0,0,0],"FLAG":0,"BASE":1,"CMND":"AdcParam1 2,10000,10000,3350"}``
2022-10-03 18:02:50 +02:00
Theo Arends
f668ea44ed
Add ESP32-S2 and ESP32-S3 touch input support
2022-09-27 15:36:35 +02:00
Theo Arends
3a4a82ba0a
Fix ESP32 touch button multi-press and hold detection
...
Fix ESP32 touch button multi-press and hold detection (#16596 )
2022-09-27 14:31:21 +02:00
Theo Arends
6bfb9d6aa4
Update changelogs
2022-09-24 16:53:11 +02:00
Theo Arends
971b06ccdd
Add command ``SetOption46 0..255``
...
Add command ``SetOption46 0..255`` to add 0..255 * 10 milliseconds power on delay before initializing I/O (#15438 )
2022-09-15 17:17:16 +02:00
Theo Arends
6aece15bd6
ESP32 Increase number of button GPIOs from 8 to 28
...
ESP32 Increase number of button GPIOs from 8 to 28 (#16518 )
2022-09-14 16:33:01 +02:00
Theo Arends
8b5a34b014
Add support of optional file calib.dat
...
Add support of optional file calib.dat on ADE7953 based energy monitors like Shelly EM (#16486 )
2022-09-13 15:35:09 +02:00
Theo Arends
ae1d4ef1f7
Bump version to v12.1.1.2
2022-09-10 16:32:57 +02:00
Theo Arends
04160106c2
Add commands DspLine and DspSpeed
...
Add commands DspLine and DspSpeed (#15856 )
2022-09-08 16:02:49 +02:00
Theo Arends
86e45969bd
Support for DFRobot SEN0390 V30B ambient light sensor
...
Add support for DFRobot SEN0390 V30B ambient light sensor (#16105 )
2022-09-02 13:13:47 +02:00
Theo Arends
684584a5e5
Command ``SetOption146 1`` to enable display of ESP32 internal temperature
2022-09-02 11:24:47 +02:00
Theo Arends
14642fb214
Update changelogs
2022-09-01 09:43:20 +02:00
Theo Arends
71c3b98b35
Add download link for v5.14.0
2022-08-31 15:51:21 +02:00
Theo Arends
0e59ddc467
Update changelogs
2022-08-31 11:08:45 +02:00
Theo Arends
4cafaf269c
Update changelogs
2022-08-28 15:05:46 +02:00
Theo Arends
7e34936e6b
Update changelogs
2022-08-27 11:36:12 +02:00
Theo Arends
c0cb49d2c8
TasmotaModbus library from v3.5.0 to v3.6.0
...
TasmotaModbus library from v3.5.0 to v3.6.0 (#16351 )
2022-08-27 11:31:29 +02:00
Theo Arends
f3e677e805
Button debouncing V3 by adopting switch debounce code ( #16339 )
...
Button debouncing V3 by adopting switch debounce code (#15867 )
2022-08-25 17:23:51 +02:00
Theo Arends
58f14301ae
Bump version v12.1.1.1
2022-08-25 14:08:05 +02:00
Theo Arends
a187867070
Lost module name in GUI regression from v12.0.2.4
...
Lost module name in GUI regression from v12.0.2.4 - 20220803 (#16324 )
2022-08-24 17:09:26 +02:00
Theo Arends
871e0dd3a0
Update changelogs
2022-08-24 09:12:15 +02:00
Theo Arends
f08a14cec2
Update changelogs
2022-08-21 11:50:38 +02:00
Theo Arends
103808ce44
Add command ``StatusRetain``
...
Add command ``StatusRetain`` (#11109 )
2022-08-19 14:24:55 +02:00
Theo Arends
49ada1cab9
Update changelogs
2022-08-19 12:30:20 +02:00
Theo Arends
89d9b379d4
Update changelogs
2022-08-19 11:48:26 +02:00
Theo Arends
94c88df93b
Fix RTC not detected when lights are present
...
Fix RTC not detected when lights are present (#16242 )
2022-08-18 15:41:35 +02:00
Theo Arends
9285f89ef7
Bump version v12.1.0.1
2022-08-18 14:39:55 +02:00
Jason2866
f054fcc590
added Catalan "AD"
2022-08-18 13:52:39 +02:00
Theo Arends
6bc0e8dc7b
TasmotaModbus library from v3.4.0 to v3.5.0
...
TasmotaModbus library from v3.4.0 to v3.5.0 (#16245 )
2022-08-18 12:17:31 +02:00
Theo Arends
2cdfcf5345
Update changelog and templates
2022-08-11 14:47:31 +02:00
Theo Arends
4037184ee0
Fix catalan workflows
2022-08-07 11:33:32 +02:00
Theo Arends
0a616df706
Update changelogs
2022-08-07 11:18:57 +02:00
Theo Arends
202ec86453
Update changelogs
2022-08-05 15:52:53 +02:00
Theo Arends
722406a461
Add support for Modbus bridge
...
Add support for Modbus bridge adding commands ``ModbusSend``, ``ModbusBaudrate`` and ``ModbusSerialConfig`` (#16013 )
2022-07-20 10:41:02 +02:00
Theo Arends
846b217427
Bump version to v12.0.2.4
...
- Bump version to v12.0.2.4
- Command ``SetOption45 1..250`` to change default bistable latching relay pulse length of 40 milliseconds (#15856 )
2022-07-16 14:32:18 +02:00
Theo Arends
26f55f752b
Update changelogs with ULP
2022-07-11 10:09:02 +02:00
Theo Arends
cd0f9c7360
Revert "Revert "Add better support for bistable (latching) relays""
...
This reverts commit c6867ddd3d
.
2022-07-09 15:55:27 +02:00
Theo Arends
c6867ddd3d
Revert "Add better support for bistable (latching) relays"
...
This reverts commit 6031e5df98
.
2022-07-09 14:47:36 +02:00
Theo Arends
6031e5df98
Add better support for bistable (latching) relays
...
Add support for bistable (latching) relays mixed with monostable relays using GPIO Relay_b or Relay_bi
2022-07-09 12:27:59 +02:00
Theo Arends
f3b1c4d543
Add POWR3xxD and THR3xxD overflow display
2022-07-07 14:24:53 +02:00
Theo Arends
e6b4a77abd
Add ESP32 Sonoff sensor support
...
- Bump version to v12.0.2.3
- Add ESP32 SI7021, THS01 and MS01 support
- Fix THRxxD template
2022-07-06 16:58:27 +02:00
Theo Arends
cefe015c68
Bump version to v12.0.2.2
...
- Add commands to better control global temperature, humidity and pressure
- Command ``GlobalTemp2 1..250`` to select Global Temperature source indexed from teleperiod occurance data (#15834 )
- Command ``GlobalHum2 1..250`` to select Global Humidity source indexed from teleperiod occurance data (#15834 )
- Command ``GlobalPress2 1..250`` to select Global Pressure source indexed from teleperiod occurance data (#15834 )
2022-06-22 23:45:25 +02:00
Theo Arends
07d2862c7f
Add support for 5-channel light dimmer driver SM2335
...
Add support for 5-channel light dimmer driver SM2335 used in SwitchBot Color Bulbs (#15839 )
2022-06-22 17:28:54 +02:00
Cossid
9774cc8478
Add release note for feature added.
2022-06-21 19:01:32 -05:00
Theo Arends
1747348558
Fixed ESP32 SendMail not working over ethernet
...
Fixed ESP32 SendMail not working over ethernet (#15794 )
2022-06-20 17:44:11 +02:00
Theo Arends
a1dedf0d26
Bump version to v12.0.2.1
2022-06-20 15:40:52 +02:00
Theo Arends
626fb783ea
Fix MQTT rc -4 on TLS connections
...
Fix MQTT rc -4 on TLS connections regression from v12.0.0 (#15809 )
2022-06-20 12:07:31 +02:00
Theo Arends
c988ba1645
Add user control over DNS timeout reducing blocking
...
Add command ``DnsTimeout 100..20000`` to change default DNS timeout from 1000 msec blocking if no DNS server found
2022-06-19 17:57:43 +02:00
Theo Arends
e9708a4e5a
Fix resolving NTP and/or MQTT server
...
- Fix resolving NTP and/or MQTT server names regression from v12.0.0 (#15816 )
- Bump version to v12.0.1.1
2022-06-17 17:35:52 +02:00
Theo Arends
dca2837285
Bump version v12.0.0.1
2022-06-16 14:02:09 +02:00
Theo Arends
85566c5ed3
Fix SHT1X driver hangs and wrong values on ESP32
...
Fix SHT1X driver hangs and wrong values on ESP32 (#15790 )
2022-06-13 14:41:40 +02:00
Theo Arends
93bb0d23b8
Reduce blocking when DNS is unreachable
...
- Reduce blocking by adding WifiPollDns before resolving NTP and/or MQTT server names (#14394 )
- Fix ESP32 Arduino Core WiFi timeout is changed from msec to seconds
2022-06-12 14:36:25 +02:00
Theo Arends
3a22874124
Increase wifi retry time ( #14394 )
...
- Increase wifi retry time (#14394 )
- Remove 1 second system hang on wifi re-connect (retry)
- Try to limit the number of seconds unresponsiveness due to wifi reconnect
2022-06-10 14:49:35 +02:00
Theo Arends
e73828cade
Update release information
2022-06-10 11:32:56 +02:00
Theo Arends
1b701173d0
Rename usb to cdc
2022-06-07 16:37:10 +02:00
Theo Arends
b356e200cd
Update RELEASENOTES.md
2022-06-07 14:35:28 +02:00
Theo Arends
44ce19f26f
Add command ``SSerialSend9 0/1`` to enable Serial Bridge console Tee for debugging purposes
2022-06-06 17:48:40 +02:00
Theo Arends
dae1b32995
Add support for Sensirion SHT4X using define USE_SHT3X ( #15349 )
2022-06-04 16:52:52 +02:00
Theo Arends
d7ffd01f1f
Add support for HYTxxx temperature and humidity sensor ( #15715 )
2022-06-04 14:15:16 +02:00
Theo Arends
59dbd4df3d
Update changelogs
2022-06-02 14:19:20 +02:00
Theo Arends
20e12c2a41
Update changelogs
2022-05-30 11:34:29 +02:00
oogm
72932b9b02
Add feature to changelog
2022-05-29 18:06:26 +02:00
Theo Arends
65a87fd747
Add command ``SetOption141 1``
...
- Add command ``SetOption141 1`` to disable display of module name in GUI header
- Prep SO146-177
2022-05-29 15:49:57 +02:00
Theo Arends
a43c194db6
Add support for Sonoff Zigbee Bridge Pro
...
- Add support for Sonoff Zigbee Bridge Pro by Stephan Hadinger (#15701 )
- Add command ``SspmDisplay 2`` to display Sonoff SPM energy data in GUI for user tab-selected relay modules (#13447 )
2022-05-27 16:08:27 +02:00
Theo Arends
41b82fd076
Possible pin output toggle after power on
...
Possible pin output toggle after power on (#15630 )
2022-05-19 18:02:05 +02:00
Theo Arends
da0a2280b5
Add support for Sonoff SPM v1.2.0
...
- Add support for Sonoff SPM v1.2.0
- Bump version to v11.1.0.3
2022-05-14 14:47:50 +02:00
Theo Arends
a80f33474d
Change to Tasmota Discovery and hatasmota
...
- Prepare to remove dedicated Home Assistant discovery in favour of Tasmota Discovery and hatasmota
2022-05-09 19:31:31 +02:00
Theo Arends
91f42fc8b8
Add ESP32 Command ``Restart 3`` to switch between SafeBoot and Production
2022-05-05 15:24:00 +02:00
Theo Arends
b26e74960e
Update changelogs
2022-05-05 14:35:30 +02:00
Theo Arends
94ebef496d
Version bump to v11.1.0.2
2022-05-04 18:09:26 +02:00
Theo Arends
cab5cb4753
Update changelogs
2022-05-04 15:34:26 +02:00
Theo Arends
d71c1711f2
Add command ``SetOption139 0/1``
...
- Add command ``SetOption139 0/1`` to switch between pressure unit "mmHg" (0) or "inHg" (1) when ``SO24 1`` (#15350 )
- Change double constants to float constants saving 200 bytes
2022-04-19 14:45:26 +02:00
Theo Arends
f8254901d0
Add delayed SetPowerOnState
...
Add delayed SetPowerOnState to Sonoff SPM (#13447 )
2022-04-16 18:20:10 +02:00
Theo Arends
f85e0dd805
Fix BL09xx negative power presentation
...
Fix BL09xx negative power presentation (#15374 )
2022-04-16 17:19:04 +02:00
Theo Arends
7c417430c9
Add energy export active to ADE7880
...
Add command ``EnergyExportActive<phase>`` to (p)reset energy export active for supported devices. Currently ADE7880 only (#13515 )
2022-04-16 16:07:42 +02:00
Theo Arends
3f4f519e5c
Fix Improv initial or erase device installation
...
Fix Improv initial or erase device installation failing to provide Configure WiFi option
2022-04-14 13:38:26 +02:00
Theo Arends
ac573f669e
Bump version 11.1.0.1
2022-04-13 09:16:55 +02:00
Theo Arends
df3fc96238
Update RELEASENOTES.md
2022-04-12 13:32:56 +02:00
Theo Arends
a4cf023357
Add command ``SetOption138 1``
...
Add command ``SetOption138 1`` to switch GUI energy multi-column layout from left/center (0) to right (1) align (#15342 )
2022-04-12 10:22:32 +02:00
Theo Arends
a5ead29b29
Update changelogs
2022-04-10 12:17:29 +02:00
Theo Arends
1f3bb675ba
HX711 redesign ( #13986 )
...
- Add HX711 command ``Sensor34 10 0|1|<weight in gram>`` to set HX711 fixed tare (0 = use auto tare, 1 = use calibrated tare, Any other value is user selected tare)
- HX711 removed command ``Sensor34 7`` as now active tare is persistent resulting in calculated current weight
- Changed HX711 commands ``Sensor34 11 <valueA>`` and ``Sensor34 12 <valueB>`` to use HX711 absolute weight conversion (#15292 )
2022-04-09 18:24:37 +02:00
Theo Arends
ccdd8c9861
Add Sensor34 commands
...
Add commands ``Sensor34 10 <valueA>`` and ``Sensor34 11 <valueB>`` to use HX711 absolute weight conversion (#15292 )
2022-04-07 15:06:21 +02:00
Theo Arends
1e49909961
Add ESP32 Support for OpenHASP v1.0
...
Add ESP32 Support for OpenHASP v1.0 by Stephan Hadinger (#15307 )
2022-04-07 13:49:58 +02:00
Theo Arends
5a507a5c6e
Fix HX711 false readings by removing large deviations
2022-04-06 15:09:35 +02:00
Theo Arends
fcec346db8
Fix ESP32 save settings after OTA upload
...
Fix ESP32 save settings after OTA upload regression from v10.0.0.3
2022-04-06 15:02:15 +02:00
Theo Arends
c84f5fe607
Add command ``IfxSensor 1`` to send non-teleperiod data to influxdb
2022-04-05 23:14:41 +02:00
Theo Arends
8b98839729
Add non-teleperiod data to influxdb
2022-04-05 21:55:05 +02:00
Theo Arends
e9ec0934d3
Remove support for Internet Explorer
...
Remove support for Internet Explorer by allowing ECMAScript6 syntax using less JavaScript code bytes (#15280 )
2022-04-03 15:01:47 +02:00
Theo Arends
c3132594d3
Add support for improv as used by esp-web-tools
2022-04-02 11:43:29 +02:00
Theo Arends
61004953e6
Change ESP32 Arduino core to v2.0.3
2022-03-27 14:57:44 +02:00
Theo Arends
1b04a00488
Add command ``SetOption136 1``
...
Add command ``SetOption136 1`` to disable single sensor reports from Tuya devices while keeping teleperiod reports (#15216 )
2022-03-25 16:27:57 +01:00
Theo Arends
40680036a6
Shrinked tasmota-minimal.bin by 34k
...
ESP8266 Shrinked tasmota-minimal.bin by removing all commands except ``Upgrade``, ``Upload``, ``OtaUrl``, ``Seriallog``, ``Weblog`` and ``Restart``
2022-03-18 14:39:06 +01:00
Theo Arends
55610efcb2
Support for up to four DS3502
...
Support for up to four DS3502 digital potentiometers with command ``Wiper<x> 0..127``
2022-03-17 16:03:40 +01:00
Theo Arends
4c3f223ddf
Change display of energy values in GUI
...
Change display of energy values in GUI use columns when define ``USE_ENERGY_COLUMN_GUI`` is enabled (default)
2022-03-15 15:43:23 +01:00
Theo Arends
fa96638487
Fix ESP32 PowerOnState
...
Fix ESP32 PowerOnState (#15084 )
2022-03-14 16:07:35 +01:00
Theo Arends
fbd8c861a3
Consolidate three RTC chip drivers into one driver
...
- Consolidate three RTC chip drivers (DS3231, BM8563, PCF85363) into one driver updating RTC as soon as possible after restart
- Removed command ``Sensor33`` and replaced by ``RtcNtpserver``
- define ``USE_RTC_ADDR`` into ``DS3231_ADDRESS``
2022-03-13 18:13:40 +01:00
Theo Arends
45d4444a49
Bump version 11.0.0.4
2022-03-12 18:08:43 +01:00
Theo Arends
c20bc70d1c
Add support for PCF85363 RTC as used in Shelly 3EM
...
Add support for PCF85363 RTC as used in Shelly 3EM (#13515 )
2022-03-12 17:38:49 +01:00
Theo Arends
bf01806e1d
Add support for Shelly 3EM
...
Add support for Shelly 3EM (#13515 )
2022-03-11 16:27:49 +01:00
Theo Arends
ae484e28ba
Add command to change timeout in RfReceive
...
Add command to change timeout in RfReceive (#15061 )
2022-03-11 14:10:22 +01:00
Theo Arends
ecb32c3e0d
Update changelogs
2022-03-02 17:32:58 +01:00
Theo Arends
27b8e9a60c
Update changelogs
2022-03-02 17:03:09 +01:00
Theo Arends
9d179c1093
Add ESP32 TasmotaSerial uart mapping
...
- TasmotaSerial library from v3.4.0 to v3.5.0 (#14981 )
- TasmotaSerial implement ``end()``
- ESP32 TasmotaSerial uart mapping to support multiple ``begin()`` and implement ``getUart()`` (#14981 )
2022-02-27 13:28:36 +01:00
Jason2866
f544fe1e19
core 2.0.2.3
2022-02-26 17:14:44 +01:00
Theo Arends
7ec39536dd
Extent number of pulsetimers
...
Extent number of pulsetimers from 8 to 32 (#8266 )
2022-02-25 15:15:07 +01:00
Theo Arends
2c963df8f0
Bump version 10.0.0.2
2022-02-20 14:02:06 +01:00
Theo Arends
e6cafcfa42
Sonoff SPM increase max number of relays
...
Sonoff SPM increase max number of relays supported to 32 (8 SPM-4Relay modules)
2022-02-18 11:42:56 +01:00
Theo Arends
a64ffeb2c9
Update changelogs
2022-02-16 12:13:02 +01:00
Theo Arends
c074573f09
Fix wiegand 34-bit rfid reading and presentation
...
Fix wiegand 34-bit rfid reading and presentation (#14834 )
2022-02-15 14:32:42 +01:00
Theo Arends
0c5bb8d2bd
Update changelogs
2022-02-14 15:51:38 +01:00
Theo Arends
f910b00d71
Fix BL0939, BL0940 and BL0942 energy monitoring buffer miscompares
...
Fix BL0939, BL0940 and BL0942 energy monitoring buffer miscompares resulting in wrong daily energy values regression from v9.5.0.8 (#14829 )
2022-02-14 15:30:55 +01:00
Theo Arends
7165258602
Update changelogs
2022-02-13 12:12:24 +01:00
Theo Arends
0d5914cc03
Fix GPIO OptionE1 selection regression
...
Fix GPIO OptionE1 selection regression (#14821 )
2022-02-13 11:22:10 +01:00
Theo Arends
9ee1ceec64
Update changelogs
2022-02-13 11:03:51 +01:00
Theo Arends
246efd9539
Update changelogs
2022-02-12 18:32:38 +01:00
Theo Arends
35571322b4
Update migration links
2022-02-12 18:27:01 +01:00
Theo Arends
1022c91b7c
Bump dev version to v11.0.0.1
2022-02-12 16:00:19 +01:00
Theo Arends
64e0393498
Prep release
2022-02-12 15:05:22 +01:00