Theo Arends
a8e369e5ce
Update feature information
2020-03-05 14:00:47 +01:00
Theo Arends
473892d5c9
Add updated experimental Sonoff D1 support
...
Add updated experimental Sonoff D1 support (#7598 )
2020-03-01 15:31:08 +01:00
Theo Arends
3343164da9
Add support for MaxBotix HRXL-MaxSonar
...
Add support for MaxBotix HRXL-MaxSonar ultrasonic range finders by Jon Little (#7814 )
2020-03-01 14:20:19 +01:00
Theo Arends
94f5321db4
Fix keeloq functionality
2020-02-28 16:35:19 +01:00
Theo Arends
5cfe247611
Change default my_user_config.h driver and sensor support
...
Change default my_user_config.h driver and sensor support removing most sensors and adding most drivers
2020-02-27 15:10:42 +01:00
Theo Arends
f706b7c490
Add support for Wemos Motor Shield V1
...
Add support for Wemos Motor Shield V1 by Denis Sborets (#7764 )
2020-02-22 12:18:20 +01:00
Theo Arends
f674feb0ef
Add initial support for Sensors AHT1x
...
Add initial support for Sensors AHT10 and AHT15 by Martin Wagner (#7596 )
2020-02-20 13:38:03 +01:00
Theo Arends
af63bb363d
Add support for FiF LE-01MR energy meter
...
Add support for FiF LE-01MR energy meter by saper-2 (#7584 )
2020-02-10 15:18:11 +01:00
Theo Arends
15df54bb07
Add support for HM-10
...
Add support for MI-BLE sensors using HM-10 Bluetooth 4.0 module by Christian Staars (#7683 )
2020-02-07 10:50:06 +01:00
Theo Arends
287b3b97f1
Fix some display issues
...
- Fix LCD line and column positioning (#7387 )
- Fix Display handling of hexadecimal escape characters (#7387 )
2020-01-01 15:13:58 +01:00
Theo Arends
be29e71c96
Update decode-status.py
2019-12-30 14:24:00 +01:00
Leonid Muravjev
782414c35d
ds1624: support for ds1621 and ds1624
...
[x] the I2C address reservation implemented.
[x] multiple sensors any combination with 8 addresses
[x] with and without HotPlug support
2019-12-27 22:56:16 +03:00
Theo Arends
5c9e090ce2
Merge branch 'development' into release
2019-12-23 16:01:41 +01:00
Theo Arends
fb8bb1223a
Add support for GPS as NTP server
...
Add support for GPS as NTP server by Christian Baars and Adrian Scillato
2019-12-23 15:39:07 +01:00
Theo Arends
799fed55cb
Merge branch 'development' into release
2019-12-20 16:02:00 +01:00
Theo Arends
72849f672e
Add support for DHT12
...
- Fix DeepSleep in case there is no wifi by Stefan Bode (#7213 )
- Add support for DHT12 Temperature and Humidity sensor by Stefan Oskamp
2019-12-20 15:48:40 +01:00
Theo Arends
1b315134da
Merge branch 'development' into release
2019-12-17 14:24:30 +01:00
Norbert Richter
0b59cc6ea1
decode-config moved to https://github.com/tasmota/decode-config
2019-12-02 15:17:45 +01:00
Theo Arends
86d12dc1fa
Merge branch 'development' into release-7.1
2019-12-02 11:06:22 +01:00
Adrian Scillato
6475e15b1c
Delete faulty Portisch Firmware
...
As reported in #7064 this version hungs when using rfraw. Using previous one works fine.
2019-12-01 15:18:24 -03:00
Theo Arends
d71fbe1f0f
Merge branch 'development' into release-7.1
2019-11-29 15:22:47 +01:00
Theo Arends
ac065867d3
Add command ``SetOption77 0/1``
...
Add command ``SetOption77 0/1`` to keep power on when slider is far left
2019-11-29 13:11:35 +01:00
Theo Arends
a0fe00dd6f
Merge branch 'development' into release-7.1
2019-11-24 15:19:54 +01:00
Theo Arends
2757fcabd7
Merge branch 'development' into release-7.1
2019-11-23 11:31:25 +01:00
blakadder
02aba62c57
docs refactored and links to docs updated
2019-11-22 22:44:38 +01:00
Norbert Richter
ac357986c4
decode-config.py: fix --restore-file, replace pycurl by requests
...
- fix error during --restore-file function
- replace lib pycurl by requests
2019-11-21 18:09:25 +01:00
Theo Arends
4cff198c25
Merge branch 'development' into release-7.1
2019-11-21 15:47:58 +01:00
Norbert Richter
7276c2a658
decode-config.py: adapt settings, rename Sonoff->Tasmota, prep for Python3
...
- add SetOption73 (cors_enabled)
- add SetOption74 (ds18x20_internal_pullup)
- add SetOption75 (grouptopic_mode)
- add SetOption76 (bootcount_update)
- add ShutterMotorDelay (shutter_motordelay)
- add SetOption82-113 (flag4)
- add i2c_drivers
- add WifiPower (wifi_output_power)
- add TempOffset (temp_comp)
- remove SetOption2 (value_units)
- rename SetOption66 (tuya_dimmer_range_255 > tuya_serial_mqtt_publish)
- rename Sonoff > Tasmota
- preparation for Python3 match
2019-11-20 12:50:38 +01:00
Theo Arends
58ec01d643
Release 7.1
2019-11-13 11:46:56 +01:00
Theo Arends
20c2f4238c
Prep for release 7.1
2019-11-13 10:17:52 +01:00
blakadder
eb49e92d24
decode-config documentation updated and clarified
2019-11-09 17:26:50 +01:00
blakadder
f88d56caad
Revert "decode-config documentation improved"
...
This reverts commit 5115d6c054
.
2019-11-09 17:11:52 +01:00
blakadder
5115d6c054
decode-config documentation improved
2019-11-09 17:08:27 +01:00
Theo Arends
e89b76adc7
Add support for Honeywell HPMA115S0
...
Add support for Honeywell HPMA115S0 particle concentration sensor by David Hunt (#6843 )
2019-11-06 14:05:17 +01:00
Jason2866
ca68fbc607
Update WriteFlash.bat
2019-11-04 15:14:00 +01:00
Jason2866
cdb7e308a9
Update VerifyFlash.bat
2019-11-04 15:13:35 +01:00
Jason2866
d8bd3b4bf1
Update ReadFlash.bat
2019-11-04 15:13:10 +01:00
Jason2866
6b5b8c2cfb
Update EraseFlash.bat
2019-11-04 15:12:34 +01:00
Jason2866
dada0bca2f
Add files via upload
2019-11-02 17:44:58 +01:00
Jason2866
753a5577d6
Add files via upload
2019-11-02 17:44:30 +01:00
Jason2866
3cb24fb5c9
Create VerifyFlash.bat
2019-11-02 17:43:16 +01:00
Theo Arends
6395db9963
Add support for Honeywell I2C HIH series
...
Add support for Honeywell I2C HIH series Humidity and Temperetaure sensor (#6808 )
2019-11-02 17:18:51 +01:00
Theo Arends
20370820b8
Update decode-status.py
2019-10-31 17:41:54 +01:00
Theo Arends
50e1038c05
Add support for SetOption82-113
2019-10-31 12:12:48 +01:00
Theo Arends
dccf6fb7cd
Add command SetOption74 0/1
...
Add command SetOption74 0/1 to enable DS18x20 internal pull-up and remove define DS18B20_INTERNAL_PULLUP (#6795 )
2019-10-30 22:22:18 +01:00
Theo Arends
2dabaa3d20
Add command SetOption73 0/1 to re-enable CORS
...
Add command SetOption73 0/1 to re-enable HTTP Cross-Origin Resource Sharing (CORS) now default disabled (#6767 )
2019-10-28 13:36:04 +01:00
Theo Arends
0e07397ff7
Change Sonoff-Tasmota to Tasmota
2019-10-27 12:04:08 +01:00
Theo Arends
24d81d40e7
Merge branch 'development' into release-6.7
2019-10-23 14:02:10 +02:00
Theo Arends
1a6ead187d
Release 6.7
2019-10-23 13:11:53 +02:00
Theo Arends
7ecc752c11
Remove command SetOption2
2019-10-22 18:34:41 +02:00
Norbert Richter
b7061a01ea
decode-config.py: adapt settings
...
- add DimmerRange (dimmer_hw_min/dimmer_hw_max)
- add DeepSleepTime (deepsleep)
- change PowerDelta (energy_power_delta)
- rename novasds_period > novasds_startingoffset
- fix tuya_disable_dimmer remove
- fix json 'header' crc32
2019-10-22 17:48:49 +02:00
Theo Arends
1110bac410
Houskeeping Arduino Slave
2019-10-21 12:36:08 +02:00
Theo Arends
4e45e660f2
Add support for EX-Store WiFi Dimmer V4
...
Add support for EX-Store WiFi Dimmer V4 (#5856 )
2019-10-18 17:29:19 +02:00
Theo Arends
84fe7b8e76
Bump version to 6.6.0.20
...
Add command SetOption65 0/1 to disable (1) fast power cycle detection fixing unwanted brownout trigger
2019-10-18 15:18:39 +02:00
Theo Arends
a62432f6eb
Fix USE_A4988_STEPPER compilation
2019-10-17 15:28:46 +02:00
Theo Arends
cd10e84ecf
Change Sonoff L1 support
2019-10-17 12:20:26 +02:00
Michael Ingraham
08ccf63a37
Uppercase USE_A4988_STEPPER
2019-10-15 14:31:10 -04:00
Theo Arends
3ff1bcd64c
Add define USE_SONOFF_RF
...
Add define USE_SONOFF_RF to enable/disable Sonoff Rf support (#6648 )
2019-10-15 15:37:22 +02:00
Jason2866
3a9e937ae8
Update decode-status.py
2019-10-15 11:42:09 +02:00
Theo Arends
f5b932a6d5
Make Sonoff Sc optional by define
...
Make Sonoff Sc optional by define (#6640 )
2019-10-14 18:15:43 +02:00
Theo Arends
c296c9a337
Deep sleep housekeeping
2019-10-14 17:01:24 +02:00
Jason2866
407b3c52ea
Add files via upload
2019-10-06 20:16:27 +02:00
Jason2866
7303bc4037
Delete RF-Bridge-EFM8BB1-20190326.hex
2019-10-06 20:14:25 +02:00
Jason2866
1defac4685
Latest portisch firmware
...
Portisch firmware build from master https://github.com/Portisch/RF-Bridge-EFM8BB1
2019-10-06 19:00:24 +02:00
Norbert Richter
ce136547f1
decode-config.py: adapt settings
...
- fix GPIO (my_gp)
- fix -g/--group filter
- change Tariff* (-register8/+tariff*)
- add (missing) cmnd Adc (my_adc0)
- add MqttLog (mqttlog_level)
- add Sensor34 8 x (hx711_json_weight_change)
- add SetOption71 (dds2382_model)
- add SetOption72 (hardware_energy_total)
- add SetOption80 (shutter_mode)
- add SetOption81 (pcf8574_ports_inverted)
- add Shutter* (shutter*)
2019-10-06 14:06:23 +02:00
pablozg
9e71109549
add support to chint ddsu666
2019-10-03 10:06:51 +02:00
Theo Arends
37fc7d2259
Add command SetOption71 for DDS238-2
...
Add command SetOption71 0/1 to switch between different Modbus Active Energy registers on DDS238-2 energy meters (#6531 )
2019-10-02 11:24:51 +02:00
Theo Arends
be4867e7f6
Fix compilation error
...
Fix compilation error
2019-10-01 16:45:53 +02:00
Norbert Richter
622fc70566
decode-config.py: adapt settings
...
- add Sensor54 (ina226_r_shunt, ina226_i_fs)
- add/change Tariffx (register8)
- add crc32 calc
2019-09-13 15:39:57 +02:00
Theo Arends
657dbff570
Add support for Hiking DDS238-2 Modbus energy meter
...
Add support for Hiking DDS238-2 Modbus energy meter by Matteo Campanella (#6384 )
2019-09-10 15:14:51 +02:00
Tim Leuschner
ff3701e1ce
Merge branch 'development' into A4988_Stepper
2019-09-08 11:49:15 +02:00
Theo Arends
3d9a73f826
Add support for up to 4 INA226 Voltage and Current sensors
...
Add support for up to 4 INA226 Voltage and Current sensors by Steve Rogers (#6342 )
2019-09-08 11:26:54 +02:00
Tim Leuschner
5eac2dd939
Support Stepper-motors connected to A4988-stepper-driver-circuit
2019-09-07 14:03:07 +02:00
Norbert Richter
7306bb3638
decode-config.py: adapt settings
...
- add Time (time_format)
- add TuyaMCU (tuya_fnid_map)
- add cfg_timestamp/cfg_crc32
- remove SetOption65 (tuya_disable_dimmer)
2019-09-06 10:42:39 +02:00
Norbert Richter
d83d2210b0
decode-config.py: adapt settings
...
- rename SetOption65 (tuya_disable_dimmer)
- expand settings
- add energy_usage struct
- add Tariff3 (energy_weekend)
- change baudrate/sbaudrate
- fix KeyError on -T cmnd
2019-08-28 16:13:23 +02:00
Theo Arends
28eb6d7661
Integrate ibeacon
2019-08-25 12:29:48 +02:00
Norbert Richter
aecb7fa1a9
decode-config.py: adapt settings
...
- add Setoption69 (tuya_dimmer_min_limit)
- add WebSensor (sensors[])
2019-08-19 13:40:06 +02:00
Theo Arends
33aa430f64
Add support for RDM6300 125kHz RFID Reader by Gerhard Mutz
...
Add support for RDM6300 125kHz RFID Reader by Gerhard Mutz
2019-08-19 11:47:59 +02:00
Theo Arends
d053767e2e
Update features
...
Update features
2019-08-12 17:28:09 +02:00
Theo Arends
03c54dab3e
Add USE_ZIGBEE to features and update decode-status.py to accomodate future features
...
Add USE_ZIGBEE to features and update decode-status.py to accomodate future features
2019-08-10 17:52:26 +02:00
Norbert Richter
908bf6cc63
decode-config.py: adapt settings
...
- add Setoption68 (pwm_multi_channels)
2019-08-08 17:24:20 +02:00
Theo Arends
afb39aa680
Add support for CHIRP soil moisture sensor by Christian Baars
...
Add support for CHIRP soil moisture sensor by Christian Baars
2019-08-07 12:08:13 +02:00
Theo Arends
aa88295d41
Update feature lists
...
Update feature lists
2019-08-01 15:42:58 +02:00
Norbert Richter
9e8d53b977
decode-config.py: adapt settings
...
- fix SetOption65 Settings version
- add Setoption66 (buzzer_enable)
- add DisplayWidth (display_width) / DisplayHeight (display_height)
- def housekeeping
2019-07-23 18:40:11 +02:00
Theo Arends
1f895854c2
Update decode-config.py
2019-07-12 12:20:44 +02:00
thirug010
943dc524ea
Update Code for Issue #6066- Dimmer Value not equal to Rx Dim State #
...
Change Summary
1. Added Option to select Dimmer Range (1-100 and 1-255) through SetOption66 (default is 1-100 for legacy device support
2. Updated Dimmer code to set range based on the option66 100 / 225
2019-07-11 22:28:08 -05:00
Theo Arends
c702cb17e0
Release 6.6
...
Release 6.6
2019-07-05 13:44:24 +02:00
Norbert Richter
b0fc277f7b
decode-config.py: revert html changes
2019-06-30 17:29:11 +02:00
Norbert Richter
5ccd8bc2e7
decode-config.py: adapt settings
...
- add SetOption65 (tuya_show_dimmer)
2019-06-30 17:24:19 +02:00
tammo0
6ee8d6be16
save space for web frontend
...
- changed <br/> to <br>
- "name" attributes of input, select, textarea, button items are removed and set by their id (only if ID is set and no name tag given)
2019-05-31 18:24:56 +02:00
Norbert Richter
adf0eb03ef
decode-config.py: adapt settings
...
- add AdcParam (adc_param*)
- cleanup vars may having conflict with keywords (PEP 8)
2019-05-29 14:08:37 +02:00
tammo0
e580c8c0f5
Logo as vector
...
Tasmota logo and symbol as vector.
2019-05-22 11:47:15 +02:00
Norbert Richter
10a9ca6c5e
decode-config.py: adapt settings
...
- fix some -g groupsnames not accepted
2019-05-21 11:13:35 +02:00
Theo Arends
d599f21758
Add defines USE_EMULATION_WEMO and USE_EMULATION_HUE
...
* Remove define USE_EMULATION from my_user_config.h (#5826 )
* Add defines USE_EMULATION_WEMO and USE_EMULATION_HUE to my_user_config.h to control emulation features at compile time (#5826 )
2019-05-20 15:09:42 +02:00
Norbert Richter
9a6cdbe1c1
decode-config.py: adapt settings
...
- fix suppress of empty values for output format "Tasmota cmnd"
- add SetOption63 (no_power_feedback)
- add config file verbose info
- change `@f`/`@h` macro char replacement (alphanumeric chars only, same as Tasmota does)
- remove mcp230xx pinmode validation
- revert PowerSet, VoltageSet, CurrentSet for >= v6.2.1.6 from -T cmnd
- allow mix case for -g parameter
- adjust command groups -g to Tasmota Wiki
2019-05-11 13:46:58 +02:00
Norbert Richter
aae0d96072
decode-config.py: adapt settings & fixes
...
- add LedMask (led_mask)
- add WebColor (web_color)
- adapt Interlock (interlock) flag (6.4.1.11)
- fix Sensor20 range (novasds_period)
- fix PulseTime<x> values
- fix readonly bitstruct
- fix wrong EnergyReset cmnd/values
- cleanup rename vars having conflict with keywords (PEP 8)
2019-04-17 18:40:47 +02:00
Theo Arends
5e810f1ff3
Add Shelly 2.5 overtemp functionality
...
* Add all temperature, humidity and pressure for global access
* Add Shelly 2.5 overtemp functionality
* Fix Shelly 2.5 I2C address priority issue when VEML6070 code is present by disabling VEML6070 for Shelly 2.5 (#5592 )
2019-04-15 18:12:42 +02:00
Norbert Richter
d310373c28
decode-config.py: adapt settings
...
- add Sensor20 (novasds_period)
2019-03-31 12:23:09 +02:00
Theo Arends
e631d49d0f
Housekeeping
...
Housekeeping
2019-03-28 11:25:38 +01:00
Theo Arends
640e28f7cf
Prep for release 6.5
...
Prep for release 6.5
2019-03-15 11:43:14 +01:00