Theo Arends
846b217427
Bump version to v12.0.2.4
...
- Bump version to v12.0.2.4
- Command ``SetOption45 1..250`` to change default bistable latching relay pulse length of 40 milliseconds (#15856 )
2022-07-16 14:32:18 +02:00
Theo Arends
e6b4a77abd
Add ESP32 Sonoff sensor support
...
- Bump version to v12.0.2.3
- Add ESP32 SI7021, THS01 and MS01 support
- Fix THRxxD template
2022-07-06 16:58:27 +02:00
Cossid
f76400ba03
Initial implementation of SM2335 LED driver.
2022-06-21 00:32:56 -05:00
Theo Arends
3a22874124
Increase wifi retry time ( #14394 )
...
- Increase wifi retry time (#14394 )
- Remove 1 second system hang on wifi re-connect (retry)
- Try to limit the number of seconds unresponsiveness due to wifi reconnect
2022-06-10 14:49:35 +02:00
Theo Arends
19e8f1a2af
Prep HYT271 sensor support
2022-05-31 14:56:09 +02:00
Theo Arends
20e12c2a41
Update changelogs
2022-05-30 11:34:29 +02:00
Theo Arends
65a87fd747
Add command ``SetOption141 1``
...
- Add command ``SetOption141 1`` to disable display of module name in GUI header
- Prep SO146-177
2022-05-29 15:49:57 +02:00
Theo Arends
cab5cb4753
Update changelogs
2022-05-04 15:34:26 +02:00
Theo Arends
d71c1711f2
Add command ``SetOption139 0/1``
...
- Add command ``SetOption139 0/1`` to switch between pressure unit "mmHg" (0) or "inHg" (1) when ``SO24 1`` (#15350 )
- Change double constants to float constants saving 200 bytes
2022-04-19 14:45:26 +02:00
Theo Arends
c3132594d3
Add support for improv as used by esp-web-tools
2022-04-02 11:43:29 +02:00
Theo Arends
1b04a00488
Add command ``SetOption136 1``
...
Add command ``SetOption136 1`` to disable single sensor reports from Tuya devices while keeping teleperiod reports (#15216 )
2022-03-25 16:27:57 +01:00
Theo Arends
55610efcb2
Support for up to four DS3502
...
Support for up to four DS3502 digital potentiometers with command ``Wiper<x> 0..127``
2022-03-17 16:03:40 +01:00
Theo Arends
c20bc70d1c
Add support for PCF85363 RTC as used in Shelly 3EM
...
Add support for PCF85363 RTC as used in Shelly 3EM (#13515 )
2022-03-12 17:38:49 +01:00
Theo Arends
4069bd1914
Add ADE7880
2022-03-11 16:54:57 +01:00
Theo Arends
d45a0426e7
Bind BL6523
2022-02-16 15:41:37 +01:00
Roberto Bonacina
bdf46ef989
Fix: add "USE_CM110x" to decode-status.py
...
When the CM110x integration has been added, the decode-status.py
a_features array was not updated accordingly.
Signed-off-by: Roberto Bonacina <roby.bonacina@tutanota.com>
2022-02-05 16:21:30 +01:00
Theo Arends
7aacdf4fbe
Add support for BME688
...
Add support for BME688 with latest Bosch-Sensor-API library (#14513 )
2022-01-19 17:05:39 +01:00
Theo Arends
88b296cf83
Support for Eastron SDM230
...
Add support for Eastron SDM230 modBus energy meter (#13443 )
2022-01-15 15:02:45 +01:00
sfromis
4dc210004a
Inconsistencies in decode-status.py feature flags
...
Not all flag names were updated to match updates to Tasmota source in `support_features.ino`. I assume the changes to be uncontroversial, with the possible exception of:
While `USE_TUYA_DIMMER` arguably is a more descriptive name than `USE_TUYA_MCU` the former name is not found anywhere in Tasmota code, which has
```
#if defined(USE_LIGHT) && defined(USE_TUYA_MCU)
feature2 |= 0x00008000; // xdrv_16_tuyadimmer.ino
#endif
```
My assumption is that the actually used names "wins", to avoid user confusion, even if you could say that the name `USE_TUYA_MCU` is too broad for the actual feature. In principle, it would be more logical to create a new "real" `#define` name, but backwards compatibility and all that.... Makes sense?
I'm ok either way....
2022-01-13 21:38:56 +01:00
Theo Arends
0cdf6c9653
Refactor Shift595
2021-12-05 14:49:49 +01:00
Theo Arends
5d60365dfb
Formalize USE_SONOFF_SPM
2021-12-01 11:21:56 +01:00
Theo Arends
3535b7543e
Add support for GPE Multi color smart light
...
Add support for GPE Multi color smart light as sold by Action in the Netherlands
2021-11-30 16:03:57 +01:00
Theo Arends
ae275d984f
Add support for HDC2010 temperature/humidity sensor
...
Add support for HDC2010 temperature/humidity sensor by Luc Boudreau (#13633 )
2021-11-11 11:33:08 +01:00
Theo Arends
a466c5abf3
Add support for HM330X
...
Add support for HM330X SeedStudio Grove Particule sensor (#13250 )
2021-10-08 13:59:11 +02:00
Theo Arends
16f9e2bd88
Merge branch 'development' into development+SCD40
2021-09-23 14:42:04 +02:00
Barbudor
65989d2552
bl09xx driver for both bl0939 and bl0940
2021-09-21 18:25:52 +02:00
Arnold Niessen
a260fa85a3
configuration files updated for SCD40/41
2021-09-15 13:26:39 +02:00
Theo Arends
6ddb14bc6a
Add Command ``SetOption2 1``
...
Add Command ``SetOption2 1`` to enable display of global temperature/humidity/pressure info to JSON sensor message
2021-09-01 09:42:10 +02:00
Theo Arends
454d4601b4
Add support for IKEA VINDRIKTNING
...
Add support for IKEA VINDRIKTNING particle concentration sensor (#12976 )
2021-08-26 11:16:28 +02:00
Theo Arends
d4f444a85a
Add support for Hydreon RG-15 Solid State Rain sensor
...
Add support for Hydreon RG-15 Solid State Rain sensor (#12974 )
2021-08-25 17:25:11 +02:00
Theo Arends
cdb35ecade
Update feature list
2021-08-12 22:43:53 +02:00
Theo Arends
4f47fc8527
Fix Neopool communication error ( #12813 )
2021-08-02 11:05:02 +02:00
Theo Arends
4173340c6a
Add support for CAN bus and Freedom Won Battery Management System by Marius Bezuidenhout ( #12651 )
2021-07-17 15:16:48 +02:00
Theo Arends
499134e1bc
Release of Tasmota WebInstaller
2021-07-13 11:40:13 +02:00
Theo Arends
512d912b77
Change setting hostname to fixing ArduinoESP32 core 2.0.0
2021-07-05 14:50:33 +02:00
Theo Arends
464ab2cb6b
Add support for AM2320 Temperature and Humidity Sensor by Lars Wessels ( #12485 )
2021-06-27 13:53:19 +02:00
sfromis
4e7c991f3d
Fix off by one error
...
Oops, warning about too old python script came when it should not.
2021-05-12 23:20:16 +02:00
sfromis
972e39b607
Expand decode-status to support all feature bits
...
Output of decode-status.py lacks information about the latest two new sets of feature bits, due to the constant for array size not being updated when the array was expanded. Code changed to avoid this magical number, but instead check size of array with texts, and array with features from the JSON format in Status 4, using the lowest number to provide as many bits as both Tasmota version and Python code supports. A warning is printed if the number of feature bits from Tasmota is higher than supported in the current iteration of Python code.
Based on history, I'm assuming that updates are first done in arendst/Tasmota development, later replicated to tasmota/Tasmota-decode-status. If wrong, I can move the change there.
2021-05-12 18:44:13 +02:00
Theo Arends
f50c3f8f62
Admin USE_ENERGY_DUMMY
2021-04-06 12:08:07 +02:00
Theo Arends
b0689af803
Add optional DS18x20 arithmetic mean
...
Add command ``SetOption126 1`` to enable DS18x20 arithmetic mean over teleperiod for JSON temperature based on (#11472 )
2021-04-02 11:43:31 +02:00
Theo Arends
be72bde8f5
Add ESP32 support for internal Hall Effect sensor
...
Add ESP32 support for internal Hall Effect sensor connected to both GPIO36 and GPIO39 only
2021-03-27 15:15:15 +01:00
Theo Arends
dd4f16526e
Fix sensor coexistence
2021-03-23 12:57:56 +01:00
RaphDaMan
587ad9a733
Squashed commit of the following:
...
commit 6c9c4a83d0076bb9303d65d5435f0d0bf2e81a6b
Author: RaphDaMan <raphael@my107.de>
Date: Sat Mar 20 13:49:36 2021 +0100
v0.7 Final and ready to PR.
2021-03-20 14:14:07 +01:00
Jan Bubík
c6673d4081
new feature: LCD/DLP Projector Serial Control
...
- implemented as XDRV53
- user must configure GPIO pins "DLP Rx" and "DLP Tx" for serial communication
- emulates an additional RELAY by sending ON/OFF commands to Projector
- continually polls the Projector's state to update virtual RELAY state
- blocks RELAY1 in ON state while Projector is running (to protect the lamp)
- serial codes for NEC and OPTOMA, ready for more manufacturers
- tested with NEC V300W
2021-02-27 22:28:29 +01:00
Theo Arends
9edccbbca5
Add commands ``StateRetain`` and ``InfoRetain`` ( #11084 )
2021-02-22 13:59:45 +01:00
Theo Arends
14206e46a1
Add support for TM1637 seven segment display by Ajith Vasudevan ( #10889 )
2021-02-17 12:32:36 +01:00
Norbert Richter
435be84ff3
Add SDM72 Modbus energy meter
2021-02-09 16:13:40 +01:00
Theo Arends
6108076eec
Prepare feature additions
2021-01-22 17:15:58 +01:00
Theo Arends
c934a20b4f
Add support for TOF10120
...
Add support for TOF10120 time of flight sensor by Cyril Pawelko (#10190 )
2021-01-22 16:48:41 +01:00
Norbert Richter
8387c14dfc
Add NeoPool feature
2021-01-20 15:06:59 +01:00
Theo Arends
2dbd1ef973
Add support for 24/26/32/34 bit RFID Wiegand
...
Add support for 24/26/32/34 bit RFID Wiegand interface (D0/D1) by Sigurd Leuther (#3647 , #10565 )
2021-01-16 15:39:33 +01:00
Theo Arends
f6d7c5c578
Update changelog
2021-01-11 14:13:20 +01:00
Theo Arends
98b529ce7b
Update decode-status.py
2021-01-07 15:12:07 +01:00
Theo Arends
6b16745cf0
Support UFILESYS
2021-01-06 14:41:23 +01:00
Theo Arends
d028e5c847
Update changelog
2021-01-03 17:04:14 +01:00
Theo Arends
ee1648d3e0
Prep SSD1331 driver
2021-01-01 16:05:06 +01:00
Theo Arends
54c1a2d029
Add support for SPI display driver for ST7789 TFT
...
Add support for SPI display driver for ST7789 TFT by Gerhard Mutz (#9037 )
2021-01-01 15:05:58 +01:00
Theo Arends
fc93b05476
Happy New Year
2021-01-01 13:57:04 +01:00
Theo Arends
59992d1954
Add support for FTC532 8-button touch controller
...
Add support for FTC532 8-button touch controller by Peter Franck (#10222 )
2020-12-22 16:47:24 +01:00
Theo Arends
5892cffbda
Prep RC522 rfid reader pt2
2020-11-30 17:54:40 +01:00
Theo Arends
7f1f9727ef
Update comments
2020-11-29 15:59:40 +01:00
Theo Arends
c02770ce96
Add support for Shelly Dimmer 1 and 2
...
Add support for Shelly Dimmer 1 and 2 by James Turton (#9854 )
2020-11-14 16:43:32 +01:00
Theo Arends
203124d678
Add command ``SetOption115 1`` to enable ESP32 MiBle
...
Add command ``SetOption115 1`` to enable ESP32 MiBle
2020-11-13 17:00:44 +01:00
Theo Arends
3334fe58ed
Prep AS608/R503 FIngerprint sensor support
2020-11-10 15:04:45 +01:00
Theo Arends
e498b28864
Add support for EZO PMP sensors
...
Add support for EZO PMP sensors by Christopher Tremblay (#9760 )
2020-11-07 11:35:33 +01:00
Theo Arends
8376dd8982
Fix switches
2020-11-04 16:31:53 +01:00
Theo Arends
54f9532919
Add command ``SetOption114 1``
...
Add command ``SetOption114 1`` to detach Swiches from Relays and enable MQTT action state for all the SwitchModes
2020-11-03 14:34:02 +01:00
Theo Arends
67bd5daf45
Update changelog
2020-11-02 11:58:23 +01:00
Theo Arends
db863c4589
Add support for EZO FLO
...
Add support for EZO FLO sensors by Christopher Tremblay (#9697 )
2020-11-01 15:15:10 +01:00
Theo Arends
6f7a20e2ec
Add support for EZO PRS sensors
...
Add support for EZO PRS sensors by Christopher Tremblay (#9659 )
2020-10-29 11:53:25 +01:00
Theo Arends
85d2626e84
Refactor feature list build
2020-10-28 11:37:59 +01:00
Theo Arends
b92b59b2b1
Add command ``SetOption113 1``
...
Add command ``SetOption113 1`` to set dimmer low on rotary dial after power off (#8263 )
2020-10-25 12:59:24 +01:00
Theo Arends
582c32f5b9
Add support for EZO EC sensor
...
Add support for EZO EC sensors by Christopher Tremblay (#9613 )
2020-10-24 12:41:08 +02:00
Theo Arends
1021cf3ca5
Update changelog and releasenotes
2020-10-23 16:56:03 +02:00
Theo Arends
500fb147c4
Add Breaking Changed to Release Notes
...
- Support for EZO RTD sensors by Christopher Tremblay (#9585 )
- On ZigbeeBridge support for glowing led when permit join is active (#9581 )
- Support for PWM Dimmer multi-press and ledmask (#9584 )
2020-10-20 14:04:29 +02:00
Theo Arends
38e2638f07
Add support for EZO Ph and ORP sensors
...
Add support for EZO Ph and ORP sensors by Christopher Tremblay (#9567 )
2020-10-18 15:36:17 +02:00
Theo Arends
330109d67c
Add optional support for Orno WE517
...
Add optional support for Orno WE517-Modbus energy meter by Maxime Vincent (#9353 )
2020-10-02 16:37:43 +02:00
Theo Arends
760d702fd0
Add optional support for Mitsubishi Electric HVAC
...
Add optional support for Mitsubishi Electric HVAC by David Gwynne (#9237 )
2020-10-02 15:10:21 +02:00
Theo Arends
5cf40fc059
Add support for VL53L1X time of flight sensor
...
Add support for VL53L1X time of flight sensor by Johann Obermeier
2020-09-29 11:27:53 +02:00
Theo Arends
afd197d493
Add command ``SetOption111 1``
...
Add command ``SetOption111 1`` to enable frequency output for buzzer GPIO (#8994 )
2020-09-15 11:44:09 +02:00
Staars
1b56a97298
update to newest version
2020-09-12 19:28:25 +02:00
Staars
a62ff5176e
add mlx90640 to configs
2020-09-12 19:16:36 +02:00
Theo Arends
201bad3eb0
Prep release 8.5
2020-09-06 18:41:39 +02:00
Theo Arends
4724fa2c49
Add support for DYP ME007
...
Add support for DYP ME007 ultrasonic distance sensor by Janusz Kostorz (#9113 )
2020-08-17 16:25:24 +02:00
Theo Arends
f2aa0607b4
Prep support for SO114 until SO145
2020-08-13 16:59:51 +02:00
Theo Arends
48c268a920
Update decode-status.py
2020-07-21 12:17:29 +02:00
Theo Arends
6843f58a91
Add support for Schneider Electric iEM3000
...
Add support for Schneider Electric iEM3000 series Modbus energy meter by Marius Bezuidenhout
2020-07-14 17:37:14 +02:00
Theo Arends
b8afa11743
Update decode-status.py to python 3.x
2020-07-04 17:39:56 +02:00
Theo Arends
1866938cbd
Integrate prometheus
2020-06-27 11:52:44 +02:00
Theo Arends
934526244f
Add support for single wire LMT01
...
Add support for single wire LMT01 temperature Sensor by justifiably (#8713 )
2020-06-17 17:22:41 +02:00
Theo Arends
7c785ab056
Add support for Energy sensor (Denky)
...
Add support for Energy sensor (Denky) for French Smart Metering meter provided by global Energy Providers
2020-06-17 15:00:48 +02:00
Theo Arends
715697cb32
Add ESP32 ethernet commands
...
Add ESP32 ethernet commands ``EthType 0/1``, ``EthAddress 0..31`` and ``EthClockMode 0..3`` (#8503 )
2020-06-16 18:36:49 +02:00
Theo Arends
ef0b797686
Add basic support for ESP32 ethernet
...
Add basic support for ESP32 ethernet adding commands ``Wifi 0/1`` and ``Ethernet 0/1`` both default ON (#8503 )
2020-06-15 18:27:04 +02:00
Robert Jaakke
9835c55203
Merge branch 'development' into HP303B
...
# Conflicts:
# tasmota/support_features.ino Resolved
# tools/decode-status.py Resolved
2020-06-11 21:56:27 +02:00
Theo Arends
4c5b2f37fd
Add initial support for Telegram
...
Add initial support for Telegram bot (#8619 )
2020-06-11 17:30:33 +02:00
Robert Jaakke
601317d5f3
Merge branch 'development' into HP303B
...
# Conflicts:
# tasmota/support_features.ino Resolved
# tools/decode-status.py Resolved
2020-06-08 09:01:43 +02:00
Theo Arends
c6fede2bf4
Basic support for BL0940
...
Basic support for BL0940 (#8175 )
2020-06-07 17:21:29 +02:00
Robert Jaakke
6667951505
Working sample
2020-06-06 22:35:41 +02:00
device111
8c29ead09d
Add support for up to eight MCP9808 temperature sensors
2020-06-02 08:35:49 +02:00
Theo Arends
86921e60b2
Add support for VEML6075 and VEML7700
...
- Add support for VEML6075 UVA/UVB/UVINDEX Sensor by device111 (#8432 )
- Add support for VEML7700 Ambient light intensity Sensor by device111 (#8432 )
2020-05-22 15:16:01 +02:00