ad083d1675
Some code cleanup and add comments & info
2020-01-23 16:13:25 +01:00
f145d22e90
A bit more of code cleanup
2020-01-05 22:09:00 +01:00
f2ca1f3e47
Added totalActive from le01, more code tunning
2020-01-05 19:51:12 +01:00
179a1c549d
Fixed few bugs (multiplers, 0's, etc)
2020-01-05 14:32:35 +01:00
dc2d7cc681
Added F&F LE-01MR support
2020-01-05 01:06:30 +01:00
4a432fc2cd
Fix for Domoticz color temp ( #7428 )
...
Fix for Domoticz color temp (#7428 )
2020-01-04 18:24:33 +01:00
61fe727685
Possible fix for Domoticz color temp
...
Possible fix for Domoticz color temp (#7428 )
2020-01-04 17:29:04 +01:00
5c97cdc12e
Merge pull request #7437 from to-scho/hotfix/shutterbuttons_inverted_command
...
inverted ShutterButton command
2020-01-04 16:42:00 +01:00
81d3b35d0c
Merge pull request #7436 from to-scho/hotfix/shutterbuttons
...
Fixed exception with ShutterButton
2020-01-04 16:41:24 +01:00
f6f4a3f88f
inverted ShutterButton command
...
As discussed in doc repo this is the code for my inverted shutter button command.
2020-01-04 16:24:45 +01:00
cea20feab3
Fixed exception with ShutterButton
...
When a button assigned to a shutter is pressed before any command is issued an exception occured
2020-01-04 16:10:03 +01:00
49137ec79f
Refactor shutters
2020-01-04 15:09:57 +01:00
8be7dbe235
Fix shutter JSON
2020-01-04 14:20:41 +01:00
a1df6b9db9
Merge pull request #7431 from kabongsteve/shutter-improvements
...
Improve Shutter operation for HASS, MQTT and Internationalization
2020-01-04 13:54:58 +01:00
bacc9e4899
Merge pull request #7434 from s-hadinger/reduce_ct_range
...
Add SetOption82 to limit the CT range for Alexa to 200..380
2020-01-04 12:34:09 +01:00
aa665c1439
Add SetOption82 to limit the CT range for Alexa to 200..380
2020-01-04 11:01:44 +01:00
1b451e722f
Improve multiple shutter operation and MQTT
2020-01-04 13:38:56 +11:00
07d79f3076
Merge pull request #7426 from s-hadinger/rotary_iram
...
Add LightPowerIRAM() for rotary interrupt handler
2020-01-03 18:05:30 +01:00
4f74c70270
Add LightPowerIRAM() for rotary interrupt handler
2020-01-03 17:57:47 +01:00
b82d1fdcc3
Move all Rotary interrupt code to iRAM
...
Move all Rotary interrupt code to iRAM (#7410 )
2020-01-03 17:07:40 +01:00
8c2ff7237e
Fix Arduino_OTA compile error
...
Fix Arduino_OTA compile error (#7413 )
2020-01-03 16:50:56 +01:00
d473d8068a
Merge pull request #7416 from andrethomas/bmp
...
BMPxxx - Add support for deep sleep
2020-01-03 16:31:49 +01:00
9249958d90
Merge branch 'development' into bmp
2020-01-03 16:31:39 +01:00
13561ab52b
Merge pull request #7419 from mtfurlan/fix/platformio_override-scripts-comma-fix
...
fix(platformio_override_sample): extra_scripts doesn't deal well with commas
2020-01-03 16:26:15 +01:00
e618767058
Merge pull request #7418 from mtfurlan/fix/upload-script-fixing
...
fix: http-uploader.py cross platform support, espupload.py executable
2020-01-03 16:24:49 +01:00
319965fba2
Merge pull request #7423 from jpenninkhof/development
...
Reset SSD1306 before initialisation when OLED reset pin is set
2020-01-03 16:08:34 +01:00
4447b681fb
Merge pull request #7417 from s-hadinger/fix_ct_module_48
...
Fix wrong gamma correction for Module 48 lights (PWM5 for CT)
2020-01-03 16:05:31 +01:00
d15969bd1e
Reset before initialisation of the SSD1306 when OLED reset pin is set
...
If an OLED Reset pin has been selected using the PIN configuration, it makes sense to also send a reset signal to this pin before initialization of the display. The current value 0 doesn't send this signal, not even when a reset pin has been selected. Hence the change of value 0 into reset_pin >= 0. If no reset pin was set, the value of this variable is -1.
2020-01-03 10:07:42 +01:00
8078939d41
fix(platformio_override_sample): extra_scripts doesn't deal well with commas
...
If you put commas in the extra_scripts, it seems to just ignore the script after the comma?
Newlines work fine though
2020-01-02 19:49:11 -05:00
5895637e9a
fix: http-uploader.py cross platform support, espupload.py executable
2020-01-02 19:30:18 -05:00
0ab3ba6fab
Fix wrong gamma correction for Module 48 lights (PWM5 for CT)
2020-01-02 22:36:27 +01:00
06f053c172
- Add support to BMP driver to enter reset state (sleep enable)
2020-01-02 22:51:15 +02:00
d3d6014139
- Add support to BMP driver to enter reset state (sleep enable)
...
- Add support to BMP driver to enter reset state (sleep enable) when deep sleep is used in Tasmota
2020-01-02 22:41:16 +02:00
6a54eef50a
- Add support to BMP driver to enter reset state (sleep enable)
...
- Add support to BMP driver to enter reset state (sleep enable) when deep sleep is used in Tasmota
2020-01-02 22:40:14 +02:00
356e005909
BMPxxx - Enter power on state before deep sleep
2020-01-02 22:38:18 +02:00
894950ca4e
Fix wrong JSON sensor message
2020-01-02 17:40:00 +01:00
c4f6a359a7
Add experimental support for NRF24L01 as BLE-bridge
...
Add experimental support for NRF24L01 as BLE-bridge for Mijia Bluetooth sensors by Christian Baars (#7394 )
2020-01-02 16:58:20 +01:00
5489c91172
Merge pull request #7394 from Staars/nrf24_PR
...
BLE-bridge for certain Mijia-Bluetooth-sensors via NRF24L01
2020-01-02 16:28:22 +01:00
853507b503
Merge pull request #7408 from Jason2866/patch-2
...
Add link for decode-config.py
2020-01-02 15:46:06 +01:00
04a672cf4b
Add link for decode-config.py
2020-01-02 15:34:17 +01:00
1e0550e750
Add command ShutterButton <parameters>
...
Add command ``ShutterButton <parameters>`` to control shutter(s) by to-scho (#7403 )
2020-01-02 15:12:59 +01:00
62ee923b3a
Merge pull request #7407 from to-scho/hotfix/rc-switch_conrad_rs_200
...
rc-switch fix and support for Conrad_RS-200 protocol
2020-01-02 14:52:52 +01:00
eb7e7d45b2
Merge pull request #7403 from to-scho/feature/initial_shutter_button_support
...
Initial support for shutter button control
2020-01-02 14:48:13 +01:00
044fae2a6e
Update settings.h
2020-01-02 14:47:33 +01:00
f2b91117cd
rc-switch fix and support for Conrad_RS-200 protocol
...
There is a tiny bug hat prevents the usage for "Conrad RS-200" based devices. The RS-200 protocol does not repeat packets that often. One need already to detect the end of the first packet. The gap between two transmission are not handled right when RF packet is received first time.
a) 1st gap detection fixed
b) Furthermore the "Conrad RS-200" protocol is added.
2020-01-02 14:46:31 +01:00
8e3540d58d
Merge pull request #7405 from to-scho/hotfix/shutter_calibration_command_add_response
...
Add response to ShutterCalibration command
2020-01-02 14:40:25 +01:00
7ca423da92
Merge pull request #7406 from to-scho/hotfix/shutter_pos_to_percentage_fix
...
Wrong shutter percentage reporting
2020-01-02 14:39:19 +01:00
7ea9204425
Add some info to Prometheus file
2020-01-02 14:17:49 +01:00
a9a5c33327
Wrong shutter percentage reporting
...
With calibrated shutters and ShutterPosition<x> 100 the resulting position may not be 100. This is due to 2 issues. a) percentage is calculated wrong from position due to numerical precision. b) real_position and subsequently position after movement is slightly smaller than max_position.
a) is fixed here by avoiding calculation when position is equal to calibration point
b) open, not fixed here. Issue further depends on start_position which makes it hard to reproduce. Maybe 'stop_position_delta=20' results is real_position not reaching max_position.
2020-01-02 12:46:12 +01:00
f2a89605af
Add response to ShutterCalibration command
...
When ShutterCalibration<x> is called without any arguments no response was given before that allows to read out setting like for other commands. Workaround was to call ShutterRelay<x> <y>.
2020-01-02 12:37:07 +01:00
saper-2
Theo Arends
to-scho
Hadinger
kabongsteve
Jan Penninkhof
Mark Furland
Andre Thomas
Jason2866